A modular, energy-based approach to the development of nickel containing molecular electrocatalysts for hydrogen production and oxidation

Dynamics and Coordination of a P2N2 Ligand - from Twisted Conformation to Chelation

Based on their general spacial flexibility, their Lewis and Brønsted basicity, and ability to mimic second sphere effects the 1,5-diaza-3,7-diphosphacyclooctane ligand family and their complexes have regained substantial scientific interest. It was now possible to structurally analyze a recently reported member of this family with p-tolyl and t-butyl substituents on P and N, respectively, (P2 p-tolN2 tBu). Notably, the ligand crystallizes with a 'twisted' backbone. This compound is the very first of its kind to have been unambiguously characterized with regard to its chemical and molecular structure as being in this conformation. A temperature-dependent NMR study provides insight into the molecular dynamics of two isomers in solution, which are most likely also both twisted, as judged by the observed limited reactivity. Despite the in principle unfavorable conformation of the free ligand, it was successfully chelated to tungsten and molybdenum centers in mononuclear carbonyl complexes. The ligand, a derivative thereof and four new complexes were comprehensively characterized and analyzed in comparison. This includes single crystal XRD molecular structures of P2 p-tolN2 tBu and all four complexes. P2 p-tolN2 tBu, regardless of its twisted conformation, is able to coordinate to metal centers given that enough energy (heat) for a conformational change is provided.

Scaling Relation between the Reduction Potential of Copper Catalysts and the Turnover Frequency for the Oxygen and Hydrogen Peroxide Reduction Reactions

Changes in the electronic structure of copper complexes can have a remarkable impact on the catalytic rates, selectivity, and overpotential of electrocatalytic reactions. We have investigated the effect of the half-wave potential (E1/2) of the CuII/CuI redox couples of four copper complexes with different pyridylalkylamine ligands. A linear relationship was found between E1/2 of the catalysts and the logarithm of the maximum rate constant of the reduction of O2 and H2O2. Computed binding constants of the binding of O2 to CuI, which is the rate-determining step of the oxygen reduction reaction, also correlate with E1/2. Higher catalytic rates were found for catalysts with more negative E1/2 values, while catalytic reactions with lower overpotentials were found for complexes with more positive E1/2 values. The reduction of O2 is more strongly affected by the E1/2 than the H2O2 rates, resulting in that the faster catalysts are prone to accumulate peroxide, while the catalysts operating with a low overpotential are set up to accommodate the 4-electron reduction to water. This work shows that the E1/2 is an important descriptor in copper-mediated O2 reduction and that producing hydrogen peroxide selectively close to its equilibrium potential at 0.68 V vs reversible hydrogen electrode (RHE) may not be easy.

Hybrid photocathode based on a Ni molecular catalyst and Sb2Se3 for solar H2 production

We report a H₂ evolving hybrid photocathode based on Sb₂Se₃ and a precious metal free molecular catalyst. Through the use of a high surface area TiO₂ scaffold, we successfully increased the Ni molecular catalyst loading from 7.08 ± 0.43 to 45.76 ± 0.81 nmol cm^-2, achieving photocurrents of 1.3 mA cm^-2 at 0 V vs. RHE, which is 81-fold higher than the device without the TiO₂ mesoporous layer.

Bioinspired and biomolecular catalysts for energy conversion and storage

Metalloenzymes are remarkable for facilitating challenging redox transformations with high efficiency and selectivity. In the area of alternative energy, scientists aim to capture these properties in bioinspired and engineered biomolecular catalysts for the efficient and fast production of fuels from low-energy feedstocks such as water and carbon dioxide. In this short review, efforts to mimic biological catalysts for proton reduction and carbon dioxide reduction are highlighted. Two important recurring themes are the importance of the microenvironment of the catalyst active site and the key role of proton delivery to the active site in achieving desired reactivity. Perspectives on ongoing and future challenges are also provided.

Quinolinate Synthase: An Example of the Roles of the Second and Outer Coordination Spheres in Enzyme Catalysis

The activation energy barrier of biochemical reactions is normally lowered by an enzyme catalyst, which directly helps the weakening of the bond(s) to be broken. In many metalloenzymes, this is a first coordination sphere effect. Besides having a direct catalytic action, enzymes can fix their reactive groups and substrates so that they are optimally positioned and also modify the water activity in the system. They can either activate substrates prior to their reaction or bind preactivated substrates, thereby drastically reducing local entropic effects. The latter type is well represented by some bisubstrate reactions, where they have been defined as "entropic traps". These can be described as "second coordination sphere" processes, but enzymes can also control the reactivity beyond this point through local conformational changes belonging to an "outer coordinate sphere" that can be modulated by substrate binding. We have chosen the [4Fe-4S] cluster-dependent enzyme quinolinate synthase to illustrate each one of these processes. In addition, this very old metalloenzyme shows low in vitro substrate binding specificity, atypical reactivity that produces dead-end products, and a unique modulation of its active site volume.

Non-Covalent Functionalization of Graphene Oxide-Supported 2-Picolyamine-Based Zinc(II) Complexes as Novel Electrocatalysts for Hydrogen Production

Three mononuclear 2-picolylamine-containing zinc(III) complexes viz [(2-PA)2ZnCl]2(ZnCl4)] (Zn1), [(2-PA)2Zn(H2O)](NO3)2] (Zn2) and [Zn(2-PA)2(OH)]NO3] (Zn3) were synthesized and fully characterized. Spectral and X-ray structural characteristics showed that the Zn1 complex has a square-pyramidal coordination environment around a zinc(II) core. The hydroxide complex Zn3 was non-covalently functionalized with few layers of graphene oxide (GO) sheets, formed by exfoliation of GO in water. The resulting Zn3/GO hybrid material was characterized by FT-IR, TGA-DSC, SEM-EDX and X-ray powder diffraction. The way of interaction of Zn3 with GO has been established through density functional theory (DFT) calculations. Both experimental and theoretical findings indicate that, on the surface of GO, the complex Zn3 forms a complete double-sided adsorption layer. Zn3 and its hybrid form Zn3/GO have been individually investigated as electrocatalysts for the hydrogen evolution reaction. The hybrid heterogenized form Zn3/GO was supported on glassy carbon (GC) with variable loading densities of Zn3 (0.2, 0.4 and 0.8 mg cm−2) to form electrodes. These electrodes have been tested as molecular electrocatalysts for the hydrogen evolution reaction (HER) using linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) in 0.1 M KOH. Results showed that both GC-Zn3 and GC-Zn3/GO catalysts for the HER are highly active, and with increase of the catalyst’s loading density, this catalytic activity enhances. The high catalytic activity of HER with a low onset potential of −140 mV vs. RHE and a high exchange current density of 0.22 mA cm−2 is achieved with the highest loading density of Zn3 (0.8 mg cm−2). To achieve a current density of 10 mA cm−2, an overpotential of 240 mV was needed.

Biophysical Characterization of Iron-Sulfur Proteins

Iron-sulfur proteins are primordial catalysts and biological electron carriers that today drive major metabolic pathways across all forms of life. They can access a diversity of oxidation states and can mediate electron transfer over an extended range of reduction potentials spanning more than 1 V. Depending on the protein micro-environment and geometry of ligand, co-ordination the iron-sulfur clusters can occur in different forms [2Fe-2S], [3Fe-4S], HiPIP [4Fe-4S], and [4Fe-4S]. There are several spectroscopic methods available to characterize the composition and electronic configuration of the iron-sulfur clusters, such as optical methods and electron paramagnetic resonance. This paper presents the protocols used to characterize the metal center of Coiled-Coil Iron-Sulfur (CCIS), an artificial metalloprotein containing one [4Fe-4S] cluster. It is expected that these protocols will be of general utility for other iron-sulfur proteins.

Successes, challenges, and opportunities for quantum chemistry in understanding metalloenzymes for solar fuels research

Overview of the rich and diverse contributions of quantum chemistry to understanding the structure and function of the biological archetypes for solar fuel research, photosystem II and hydrogenases.

Biochemical and artificial pathways for the reduction of carbon dioxide, nitrite and the competing proton reduction: effect of 2nd sphere interactions in catalysis

Reduction of oxides and oxoanions of carbon and nitrogen are of great contemporary importance as they are crucial for a sustainable environment.

In Vivo Biogenesis of a De Novo Designed Iron-Sulfur Protein

In vivo expression of metalloproteins requires specific metal trafficking and incorporation machinery inside the cell. Synthetic designed metalloproteins are typically purified without the target metal, which is subsequently introduced through in vitro reconstitution. The extra step complicates protein optimization by high-throughput library screening or laboratory evolution. We demonstrate that a designed coiled-coil iron-sulfur protein (CCIS) assembles robustly with [4Fe-4S] clusters in vivo. While in vitro reconstitution produces a mixture of oligomers that depends on solution conditions, in vivo production generates a stable homotrimer coordinating a single, diamagnetic [4Fe-4S]²⁺ cluster. The multinuclear cluster of in vivo assembled CCIS is more resistant to degradation by molecular oxygen. Only one of the two metal coordinating half-sites is required in vivo, indicating specificity of molecular recognition in recruitment of the metal cluster. CCIS, unbiased by evolution, is a unique platform to examine iron-sulfur protein biogenesis and develop synthetic multinuclear oxidoreductases.

Synthesis and Structure of Iron (II) Complexes of Functionalized 1,5-Diaza-3,7-Diphosphacyclooctanes

In order to synthesize new iron (II) complexes of 1,5-diaza-3,7-diphosphacyclooctanes with a wider variety of the substituents on ligands heteroatoms (including functionalized ones, namely, pyridyl groups) and co-ligands, it was found that these ligands with relatively small phenyl, benzyl, and pyridin-2-yl substituents on phosphorus atoms in acetonitrile formed bis-P,P-chelate cis-complexes [L₂Fe(CH₃CN)₂]²⁺ (BF₄)₂⁻, whereas P-mesityl-substituted ligand formed only monoligand P,P-complex [LFe(CH₃CN)₄]²⁺ (BF₄)₂⁻. 3,7-dibenzyl-1,5-di(1′-(R)-phenylethyl)-1,5-diaza-3,7-diphosphacyclooctane reacted with hexahydrate of iron (II) tetrafluoroborate in acetone to give an unusual bis-ligand cationic complex of the composition [L₂Fe(BF₄)]⁺ BF₄⁻, where two fluorine atoms of the tetrafluoroborate unit occupied two pseudo-equatorial positions at roughly octahedral iron ion, according to X-ray diffraction data. 1,5-diaza-3,7-diphosphacyclooctanes replaced tetrahydrofurane and one of the carbonyl ligands of cyclopentadienyldicarbonyl(tetrahydrofuran)iron (II) tetrafluoroborate to form heteroligand complexes [CpFeL(CO)]⁺BF₄⁻. The structural studies in the solid phase and in solutions showed that diazadiphosphacyclooctane ligands of all complexes adopted chair-boat conformations so that their nitrogen atoms were in close proximity to the central iron ion. The redox properties of the obtained complexes were performed by the cyclic voltammetry method.

Non-Catalytic Benefits of Ni(II) Binding to an Si(111)-PNP Construct for Photoelectrochemical Hydrogen Evolution Reaction: Metal Ion Induced Flat Band Potential Modulation

We report here the remarkable and non-catalytic beneficial effects of a Ni(II) ion binding to a Si|PNP type surface as a result of significant thermodynamic band bending induced by ligand attachment and Ni(II) binding. We unambiguously deconvolute the thermodynamic flat band potentials (V_FB) from the kinetic onset potentials (V_on) by synthesizing a specialized bis-PNP macrochelate that enables one-step Ni(II) binding to a p-Si(111) substrate. XPS analysis and rigorous control experiments confirm covalent attachment of the designed ligand and its resulting Ni(II) complex. Illuminated J-V measurements under catalytic conditions show that the Si|BisPNP-Ni substrate exhibits the most positive onset potential for the hydrogen evolution reaction (HER) (-0.55 V vs Fc/Fc⁺) compared to other substrates herein. Thermodynamic flat band potential measurements in the dark reveal that Si|BisPNP-Ni also exhibits the most positive V_FB value (-0.02 V vs Fc/Fc⁺) by a wide margin. Electrochemical impedance spectroscopy data generated under illuminated, catalytic conditions demonstrate a surprising lack of correlation evident between V_on and equivalent circuit element parameters commonly associated with HER. Overall, the resulting paradigm comprises a system wherein the extent of band bending induced by metal ion binding is the primary driver of photoelectrochemical (PEC)-HER benefits, while the kinetic (catalytic) effects of the PNP-Ni(II) are minimal. This suggests that dipole and band-edge engineering must be a primary design consideration (not secondary to catalyst) in semiconductor|catalyst hybrids for PEC-HER.

Targeting an Artificial Metal Nuclease to DNA by a Simple Chemical Modification and Its Drastic Effect on Catalysis

A novel metal complex was synthesized containing a purine derived ligand in order to increase its binding to DNA. We observed a huge increase in nuclease activity and, quite interestingly, an improvement on DNA sequence selectivity. A potential site of specific cleavage in the presence of a reductant in the reaction medium is suggested. We were able to synthesize a novel metal nuclease with improved activity on DNA, and with sequence specificity when exposed to a coreactant, this opens up new possibilities to create site specific and redox status modulated artificial nucleases.

Photocatalytic and electrocatalytic hydrogen production using nickel complexes supported by hemilabile and non-innocent ligands

Nickel complexes with non-innocent ligands generated by one-electron reduction of octahedral Schiff base nickel(ii) complexes with hemilabile ligands exhibited excellent catalytic activities of over 5000 TONs through a metal-ligand cooperation mechanism for hydrogen evolution from water under visible light irradiation.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Inverse Opal CuCrO2 Photocathodes for H2 Production Using Organic Dyes and a Molecular Ni Catalyst

Dye-sensitized photoelectrochemical (DSPEC) cells are an emerging approach to producing solar fuels. The recent development of delafossite CuCrO2 as a p-type semiconductor has enabled H2 generation through the coassembly of catalyst and dye components. Here, we present a CuCrO2 electrode based on a high-surface-area inverse opal (IO) architecture with benchmark performance in DSPEC H2 generation. Coimmobilization of a phosphonated diketopyrrolopyrrole (DPP-P) or perylene monoimide (PMI-P) dye with a phosphonated molecular Ni catalyst (NiP) demonstrates the ability of IO-CuCrO2 to photogenerate H2. A positive photocurrent onset potential of approximately +0.8 V vs RHE was achieved with these photocathodes. The DPP-P-based photoelectrodes delivered photocurrents of -18 μA cm-2 and generated 160 ± 24 nmol of H2 cm-2, whereas the PMI-P-based photocathodes displayed higher photocurrents of -25 μA cm-2 and produced 215 ± 10 nmol of H2 cm-2 at 0.0 V vs RHE over the course of 2 h under visible light illumination (100 mW cm-2, AM 1.5G, λ > 420 nm, 25 °C). The high performance of the PMI-constructed system is attributed to the well-suited molecular structure and photophysical properties for p-type sensitization. These precious-metal-free photocathodes highlight the benefits of using bespoke IO-CuCrO2 electrodes as well as the important role of the molecular dye structure in DSPEC fuel synthesis.

Understanding and Design of Bidirectional and Reversible Catalysts of Multielectron, Multistep Reactions

Some enzymes, including those that are involved in the activation of small molecules such as H₂ or CO₂, can be wired to electrodes and function in either direction of the reaction depending on the electrochemical driving force and display a significant rate at very small deviations from the equilibrium potential. We call the former property "bidirectionality" and the latter "reversibility". This performance sets very high standards for chemists who aim at designing synthetic electrocatalysts. Only recently, in the particular case of the hydrogen production/evolution reaction, has it been possible to produce inorganic catalysts that function bidirectionally, with an even smaller number that also function reversibly. This raises the question of how to engineer such desirable properties in other synthetic catalysts. Here we introduce the kinetic modeling of bidirectional two-electron-redox reactions in the case of molecular catalysts and enzymes that are either attached to an electrode or diffusing in solution in the vicinity of an electrode. We emphasize that trying to discuss bidirectionality and reversibility in relation to a single redox potential leads to an impasse: the catalyst undergoes two redox transitions, and therefore two catalytic potentials must be defined, which may depart from the two potentials measured in the absence of catalysis. The difference between the two catalytic potentials defines the reversibility; the difference between their average value and the equilibrium potential defines the directionality (also called "preference", or "bias"). We describe how the sequence of events in the bidirectional catalytic cycle can be elucidated on the basis of the voltammetric responses. Further, we discuss the design principles of bidirectionality and reversibility in terms of thermodynamics and kinetics and conclude that neither bidirectionality nor reversibility requires that the catalytic energy landscape be flat. These theoretical findings are illustrated by previous results obtained with nickel diphosphine molecular catalysts and hydrogenases. In particular, analysis of the nickel catalysts highlights the fact that reversible catalysis can be achieved by catalysts that follow complex mechanisms with branched reaction pathways.

Promoting proton coupled electron transfer in redox catalysts through molecular design

Mini-review on using the secondary coordination sphere to facilitate multi-electron, multi-proton catalysis.

Solar H2 generation in water with a CuCrO2 photocathode modified with an organic dye and molecular Ni catalyst

Dye-sensitised photoelectrochemical (DSPEC) cells have emerged in recent years as a route to solar fuel production. However, fuel-forming photocathodes are presently limited by photo-corrodible narrow band gap semiconductors or the small range of available wide bandgap p-type semiconductors such as NiO that display low performance with dyes. Here, we introduce CuCrO2 as a suitable p-type semiconductor for visible light-driven H2 generation upon co-immobilisation of a phosphonated diketopyrrolopyrrole dye with a Ni-bis(diphosphine) catalyst. The hybrid CuCrO2 photocathode displays an early photocurrent onset potential of +0.75 V vs. RHE and delivers a photocurrent of 15 μA cm-2 at 0.0 V vs. RHE in pH 3 aqueous electrolyte solution under UV-filtered simulated solar irradiation. Controlled potential photoelectrolysis at 0.0 V vs. RHE shows good stability and yields a Ni catalyst-based turnover number of 126 ± 13 towards H2 after 2 h. This precious metal-free system outperforms an analogous NiO|dye/catalyst assembly and therefore highlights the benefits of using CuCrO2 as a novel material for DSPEC applications.

From Enzymes to Functional Materials-Towards Activation of Small Molecules

The design of non-noble metal-containing heterogeneous catalysts for the activation of small molecules is of utmost importance for our society. While nature possesses very sophisticated machineries to perform such conversions, rationally designed catalytic materials are rare. Herein, we aim to raise the awareness of the overall common design and working principles of catalysts incorporating aspects of biology, chemistry, and material sciences.

Pairwise H2/D2 Exchange and H2 Substitution at a Bimetallic Dinickel(II) Complex Featuring Two Terminal Hydrides

A compartmental ligand scaffold HL with two β-diketiminato binding sites spanned by a pyrazolate bridge gave a series of dinuclear nickel(II) dihydride complexes M[LNi₂(H)₂], M = Na (Na·2) and K (K·2), which were isolated after reacting the precursor complex [LNi₂(μ-Br)] (1) with MHBEt₃ (M = Na and K). Crystallographic characterization showed the two hydride ligands to be directed into the bimetallic pocket, closely interacting with the alkali metal cation. Treatment of K·2 with dibenzo(18-crown-6) led to the separated ion pair [LNi₂(H)₂][K(DB18C6)] (2[K(DB18C6)]). Reaction of Na·2 or K·2 with D₂ was investigated by a suite of ¹H and ²H NMR experiments, revealing an unusual pairwise H₂/D₂ exchange process that synchronously involves both Ni-H moieties without H/D scrambling. A mechanistic picture was provided by DFT calculations which suggested facile recombination of the two terminal hydrides within the bimetallic cleft, with a moderate enthalpic barrier of ∼62 kJ/mol, to give H₂ and an antiferromagnetically coupled [LNi^I₂]^- species. This was confirmed by SQUID monitoring during H₂ release from solid 2[K(DB18C6)]. Interaction with the Lewis acid cation (Na⁺ or K⁺) significantly stabilizes the dihydride core. Kinetic data for the M[L(Ni-H)₂] → H₂ transition derived from 2D ¹H EXSY spectra confirmed first-order dependence of H₂ release on M·2 concentration and a strong effect of the alkali metal cation M⁺. Treating [LNi₂(D)₂]^- with phenylacetylene led to D₂ and dinickel(II) complex 3^- with a twice reduced styrene-1,2-diyl bridging unit in the bimetallic pocket. Complexes [LNi^II₂(H)₂]^- having two adjacent terminal hydrides thus represent a masked version of a highly reactive dinickel(I) core. Storing two reducing equivalents in adjacent metal hydrides that evolve H₂ upon substrate binding is reminiscent of the proposed N₂ binding step at the FeMo cofactor of nitrogenase, suggesting the use of the present bimetallic scaffold for reductive bioinspired activation of a range of inert small molecules.

Proton Transfer in the Catalytic Cycle of [NiFe] Hydrogenases: Insight from Vibrational Spectroscopy

Catalysis of H₂ production and oxidation reactions is critical in renewable energy systems based around H₂ as a clean fuel, but the present reliance on platinum-based catalysts is not sustainable. In nature, H₂ is oxidized at minimal overpotential and high turnover frequencies at [NiFe] catalytic sites in hydrogenase enzymes. Although an outline mechanism has been established for the [NiFe] hydrogenases involving heterolytic cleavage of H₂ followed by a first and then second transfer of a proton and electron away from the active site, details remain vague concerning how the proton transfers are facilitated by the protein environment close to the active site. Furthermore, although [NiFe] hydrogenases from different organisms or cellular environments share a common active site, they exhibit a broad range of catalytic characteristics indicating the importance of subtle changes in the surrounding protein in controlling their behavior. Here we review recent time-resolved infrared (IR) spectroscopic studies and IR spectroelectrochemical studies carried out in situ during electrocatalytic turnover. Additionally, we re-evaluate the significant body of IR spectroscopic data on hydrogenase active site states determined through more conventional solution studies, in order to highlight mechanistic steps that seem to apply generally across the [NiFe] hydrogenases, as well as steps which so far seem limited to specific groups of these enzymes. This analysis is intended to help focus attention on the key open questions where further work is needed to assess important aspects of proton and electron transfer in the mechanism of [NiFe] hydrogenases.

A Nickel Dithiolate Water Reduction Catalyst Providing Ligand-Based Proton-Coupled Electron-Transfer Pathways

A nickel pyrazinedithiolate ([Ni(dcpdt)₂ ]^2- ; dcpdt=5,6-dicyanopyrazine-2,3-dithiolate), bearing a NiS₄ core similar to the active center of [NiFe] hydrogenase, is shown to serve as an efficient molecular catalyst for the hydrogen evolution reaction (HER). This catalyst shows effectively low overpotentials for HER (330-400 mV at pH 4-6). Moreover, the turnover number of catalysis reaches 20 000 over the 24 h electrolysis with a high Faradaic efficiency, 92-100 %. The electrochemical and DFT studies reveal that diprotonated one-electron-reduced species (i.e., [Ni^II (dcpdt)(dcpdtH₂ )]^- or [Ni^II (dcpdtH)₂ ]^- ) forms at pH<6.4 via ligand-based proton-coupled electron-transfer (PCET) pathways, leading to electrocatalytic HER without applying the highly negative potential required to generate low-valent nickel intermediates. This is the first example of catalysts exhibiting such behavior.

Molecular Cobalt Complexes with Pendant Amines for Selective Electrocatalytic Reduction of Carbon Dioxide to Formic Acid

We report here on a new series of CO₂-reducing molecular catalysts based on Earth-abundant elements that are very selective for the production of formic acid in dimethylformamide (DMF)/water mixtures (Faradaic efficiency of 90 ± 10%) at moderate overpotentials (500-700 mV in DMF measured at the middle of the catalytic wave). The [CpCo(P^R₂N^R'₂)I]⁺ compounds contain diphosphine ligands, P^R₂N^R'₂, with two pendant amine residues that act as proton relays during CO₂-reduction catalysis and tune their activity. Four different P^R₂N^R'₂ ligands with cyclohexyl or phenyl substituents on phosphorus and benzyl or phenyl substituents on nitrogen were employed, and the compound with the most electron-donating phosphine ligand and the most basic amine functions performs best among the series, with turnover frequency >1000 s^-1. State-of-the-art benchmarking of catalytic performances ranks this new class of cobalt-based complexes among the most promising CO₂-to-formic acid reducing catalysts developed to date; addressing the stability issues would allow further improvement. Mechanistic studies and density functional theory simulations confirmed the role of amine groups for stabilizing key intermediates through hydrogen bonding with water molecules during hydride transfer from the Co center to the CO₂ molecule.

Catalytic Activity of Thiolate-Bridged Diruthenium Complexes Bearing Pendent Ether Moieties in the Oxidation of Molecular Dihydrogen

Thiolate-bridged diruthenium complexes bearing pendent ethers have been found to work as effective catalysts toward the oxidation of molecular dihydrogen into protons and electrons in water. The pendent ether moiety in the complex plays an important role to facilitate the proton transfer between the metal center and the external proton acceptor.

Evaluating the role of acidic, basic, and polar amino acids and dipeptides on a molecular electrocatalyst for H2 oxidation

Outer coordination sphere interactions reduce the overpotential for H₂ oxidation catalysts (brown ellipse) compared to those that have –COOH groups but don't have stabilizing interactions (blue ellipse).

Thermodynamic Hydricity of Transition Metal Hydrides

Transition metal hydrides play a critical role in stoichiometric and catalytic transformations. Knowledge of free energies for cleaving metal hydride bonds enables the prediction of chemical reactivity, such as for the bond-forming and bond-breaking events that occur in a catalytic reaction. Thermodynamic hydricity is the free energy required to cleave an M-H bond to generate a hydride ion (H(-)). Three primary methods have been developed for hydricity determination: the hydride transfer method establishes hydride transfer equilibrium with a hydride donor/acceptor pair of known hydricity, the H2 heterolysis method involves measuring the equilibrium of heterolytic cleavage of H2 in the presence of a base, and the potential-pKa method considers stepwise transfer of a proton and two electrons to give a net hydride transfer. Using these methods, over 100 thermodynamic hydricity values for transition metal hydrides have been determined in acetonitrile or water. In acetonitrile, the hydricity of metal hydrides spans a range of more than 50 kcal/mol. Methods for using hydricity values to predict chemical reactivity are also discussed, including organic transformations, the reduction of CO2, and the production and oxidation of hydrogen.

Nickel-centred proton reduction catalysis in a model of [NiFe] hydrogenase

Hydrogen production through water splitting is one of the most promising solutions for the storage of renewable energy. [NiFe] hydrogenases are organometallic enzymes containing nickel and iron centres that catalyse hydrogen evolution with performances that rival those of platinum. These enzymes provide inspiration for the design of new molecular catalysts that do not require precious metals. However, all heterodinuclear NiFe models reported so far do not reproduce the Ni-centred reactivity found at the active site of [NiFe] hydrogenases. Here, we report a structural and functional NiFe mimic that displays reactivity at the Ni site. This is shown by the detection of two catalytic intermediates that reproduce structural and electronic features of the Ni-L and Ni-R states of the enzyme during catalytic turnover. Under electrocatalytic conditions, this mimic displays high rates for H₂ evolution (second-order rate constant of 2.5 × 10⁴ M^-1 s^-1; turnover frequency of 250 s^-1 at 10 mM H⁺ concentration) from mildly acidic solutions.