Organic bioelectronics in nanomedicine

PEDOT:PSS in Solution Form Exhibits Strong Potential in Inhibiting SARS-CoV-2 Infection of the Host Cells by Targeting Viruses and Also the Host Cells

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused a global pandemic with over 5 million fatalities. Vaccines against this virus have been globally administered; however, SARS-CoV-2 variants with spike protein mutations are continuously identified with strong capability to escape vaccine-elicited protection. Due to the high mutation rate and transmission ability, the development of a broad-spectrum SARS-CoV-2 inhibitor is highly in demand. In this study, the effect of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) against SARS-CoV-2 was investigated. The treatment of pseudoviruses carrying the SARS-CoV-2 spike protein with PEDOT:PSS strongly blocked SARS-CoV-2 pseudovirus infection in human ACE2-expressing cells without causing cytotoxicity. Specifically, PEDOT:PSS showed great potential in both inactivating viruses and rendering antiviral activity to the treated cells. The effects of other PEDOT:PSS solutions with different chemical ratios and properties were also validated to find the high inhibition capacity against SARS-CoV-2 pseudovirus infection. The transcriptomic data reveal that PEDOT:PSS-treated cells were endowed with transcriptional alteration, and it could be reverted after the removal of PEDOT:PSS from the culture medium. Importantly, PEDOT:PSS also exhibited broad-spectrum inhibition effects on the pseudovirus carrying the spike protein isolated from different variants. In combination with the advantage of high biocompatibility, PEDOT:PSS could thus be considered a potential therapeutic and prophylactic material against SARS-CoV-2.

Interfacial water morphology in hydrated melanin

The importance of electrically functional biomaterials is increasing as researchers explore ways to utilise them in novel sensing capacities. It has been recognised that for many of these materials the state of hydration is a key parameter that can heavily affect the conductivity, particularly those that rely upon ionic or proton transport as a key mechanism. However, thus far little attention has been paid to the nature of the water morphology in the hydrated state and the concomitant ionic conductivity. Presented here is an inelastic neutron scattering (INS) experiment on hydrated eumelanin, a model bioelectronic material, in order to investigate its 'water morphology'. We develop a rigorous new methodology for performing hydration dependent INS experiments. We also model the eumelanin dry spectra with a minimalist approach whereas for higher hydration levels we are able to obtain difference spectra to extract out the water scattering signal. A key result is that the physi-sorbed water structure within eumelanin is dominated by interfacial water with the number of water layers between 3-5, and no bulk water. We also detect for the first time, the potential signatures for proton cations, most likely the Zundel ion, within a biopolymer/water system. These new signatures may be general for soft proton ionomer systems, if the systems are comprised of only interfacial water within their structure. The nature of the water morphology opens up new questions about the potential ionic charge transport mechanisms within hydrated bioelectronics materials.

Interfacial Electrofabrication of Freestanding Biopolymer Membranes with Distal Electrodes

Using electrical signals to guide materials' deposition has a long-standing history in metal coating, microchip fabrication, and the integration of organics with devices. In electrodeposition, however, the conductive materials can be deposited only onto the electrode surfaces. Here, an innovative process is presented to electrofabricate freestanding biopolymer membranes at the interface of electrolytes without any supporting electrodes at the fabrication site. Chitosan, a derivative from the naturally abundant biopolymer chitin, has been broadly explored in electrodeposition for integrating biological entities onto microfabricated devices. It is widely believed that the pH gradients generated at the cathode deprotonate the positively charged chitosan chains into a film on the cathode surface. The interfacial electrofabrication with pH indicators, however, demonstrated that the membrane growth was driven by the instantaneous flow of hydroxyl ions from the ambient alginate solution, rather than the slow propagation of pH gradients from the cathode surface. This interfacial electrofabrication produces freestanding membrane structures and can be expanded to other materials, which presents a new direction in using electrical signals for manufacturing.

3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices

The ability to seamlessly integrate functional materials into three-dimensional (3D) constructs has been of significant interest, as it can enable the creation of multifunctional devices. Such integration can be achieved with a multiscale, multi-material 3D printing strategy. This technology has enabled the creation of unique devices such as personalized tissue regenerative scaffolds, biomedical implants, 3D electronic devices, and bionic constructs which are challenging to realize with conventional manufacturing processes. In particular, the incorporation of nanomaterials into 3D printed devices can endow a wide range of constructs with tailorable mechanical, chemical, and electrical functionalities. This review highlights the advances and unique possibilities in the fabrication of novel electronic, biomedical, and bioelectronic devices that are realized by the synergistic integration of nanomaterials with 3D printing technologies.

Poly-l-Lactic Acid Nanotubes as Soft Piezoelectric Interfaces for Biology: Controlling Cell Attachment via Polymer Crystallinity

It has become increasingly evident that the mechanical and electrical environment of a cell is crucial in determining its function and the subsequent behavior of multicellular systems. Platforms through which cells can directly interface with mechanical and electrical stimuli are therefore of great interest. Piezoelectric materials are attractive in this context because of their ability to interconvert mechanical and electrical energy, and piezoelectric nanomaterials, in particular, are ideal candidates for tools within mechanobiology, given their ability to both detect and apply small forces on a length scale that is compatible with cellular dimensions. The choice of piezoelectric material is crucial to ensure compatibility with cells under investigation, both in terms of stiffness and biocompatibility. Here, we show that poly-l-lactic acid nanotubes, grown using a melt-press template wetting technique, can provide a "soft" piezoelectric interface onto which human dermal fibroblasts readily attach. Interestingly, by controlling the crystallinity of the nanotubes, the level of attachment can be regulated. In this work, we provide detailed nanoscale characterization of these nanotubes to show how differences in stiffness, surface potential, and piezoelectric activity of these nanotubes result in differences in cellular behavior.

Soft and Ion-Conducting Materials in Bioelectronics: From Conducting Polymers to Hydrogels

Bioelectronics devices that directly interface with cells and tissue have applications in neural and cardiac stimulation and recording, electroceuticals, and brain machine interfaces for prostheses. The interface between bioelectronic devices and biological tissue is inherently challenging due to the mismatch in both mechanical properties (hard vs soft) and charge carriers (electrons vs ions). In addition to conventional metals and silicon, new materials have bridged this interface, including conducting polymers, carbon-based nanomaterials, as well as ion-conducting polymers and hydrogels. This review provides an update on advances in soft bioelectronic materials for current and future therapeutic applications. Specifically, this review focuses on soft materials that can conduct both electrons and ions, and also deliver drugs and small molecules. The future opportunities and emerging challenges in the field are also highlighted.

Implantable Direct Current Neural Modulation: Theory, Feasibility, and Efficacy

Implantable neuroprostheses such as cochlear implants, deep brain stimulators, spinal cord stimulators, and retinal implants use charge-balanced alternating current (AC) pulses to recover delivered charge and thus mitigate toxicity from electrochemical reactions occurring at the metal-tissue interface. At low pulse rates, these short duration pulses have the effect of evoking spikes in neural tissue in a phase-locked fashion. When the therapeutic goal is to suppress neural activity, implants typically work indirectly by delivering excitation to populations of neurons that then inhibit the target neurons, or by delivering very high pulse rates that suffer from a number of undesirable side effects. Direct current (DC) neural modulation is an alternative methodology that can directly modulate extracellular membrane potential. This neuromodulation paradigm can excite or inhibit neurons in a graded fashion while maintaining their stochastic firing patterns. DC can also sensitize or desensitize neurons to input. When applied to a population of neurons, DC can modulate synaptic connectivity. Because DC delivered to metal electrodes inherently violates safe charge injection criteria, its use has not been explored for practical applicability of DC-based neural implants. Recently, several new technologies and strategies have been proposed that address this safety criteria and deliver ionic-based direct current (iDC). This, along with the increased understanding of the mechanisms behind the transcutaneous DC-based modulation of neural targets, has caused a resurgence of interest in the interaction between iDC and neural tissue both in the central and the peripheral nervous system. In this review we assess the feasibility of in-vivo iDC delivery as a form of neural modulation. We present the current understanding of DC/neural interaction. We explore the different design methodologies and technologies that attempt to safely deliver iDC to neural tissue and assess the scope of application for direct current modulation as a form of neuroprosthetic treatment in disease. Finally, we examine the safety implications of long duration iDC delivery. We conclude that DC-based neural implants are a promising new modulation technology that could benefit from further chronic safety assessments and a better understanding of the basic biological and biophysical mechanisms that underpin DC-mediated neural modulation.

Electrodeposition of Zwitterionic PEDOT Films for Conducting and Antifouling Surfaces

Conferring antifouling properties can extend the use of conducting polymers in biosensors and bioelectronics under complex biological conditions. On the basis of the antifouling properties of a series of zwitterionic polymers, we synthesized new thiophene-based compounds bearing a phosphorylcholine, carboxybetaine, or sulfobetaine pendant group. The monomers were synthesized by a facile reaction of thiol-functionalized 3,4-ethylenedioxythiophene with zwitterionic methacrylates. Electrochemical copolymerization was performed to deposit zwitterionic poly(3,4-ethylenedioxythiophene) (PEDOT) films with tunable conducting and antifouling properties on a conducting substrate. Electrochemical impedance spectroscopy showed that the conductivity and capacitance decreased with increasing zwitterionic content in the films. Protein adsorption and cell adhesion studies showed the effects of the type and content of zwitterions on the antifouling characteristics. Optimization of the electrodeposition conditions enabled development of both conducting and antifouling polymer films. These antifouling conjugated functional polymers have promising applications in biological environments.

Delivery of Cargo with a Bioelectronic Trigger

Biological systems exchange information often with chemical signals. Here, we demonstrate the chemical delivery of a fluorescent label using a bioelectronic trigger. Acid-sensitive microparticles release fluorescin diacetate upon low pH induced by a bioelectronic device. Cardiac fibroblast cells (CFs) uptake fluorescin diacetate, which transforms into fluorescein and emits a fluorescent signal. This proof-of-concept bioelectronic triggered delivery may be used in the future for real-time programming and control of cells and cell systems.

Two-dimensional material-based bionano platforms to control mesenchymal stem cell differentiation

Background

In the past decade, stem cells, with their ability to differentiate into various types of cells, have been proven to be resourceful in regenerative medicine and tissue engineering. Despite the ability to repair damaged parts of organs and tissues, the use of stem cells still entails several limitations, such as low differentiation efficiency and difficulties in guiding differentiation. To address these limitations, nanotechnology approaches have been recently implemented in stem cell research. It has been discovered that stem cells, in combination with carbon-based functional materials, show enhanced regenerative performances in varying biophysical conditions. In particular, several studies have reported solutions to the conventional quandaries in biomedical engineering, using synergetic effects of nanohybrid materials, as well as further development of technologies to recover from diverse health conditions such as bone fracture and strokes.

Main text

In this review, we discuss several prior studies regarding the application of various nanomaterials in controlling the behavior of stem cells. We focus on the potential of different types of nanomaterials, such as two-dimensional materials, gold nanoparticles, and three-dimensional nanohybrid composites, to control the differentiation of human mesenchymal stem cells (hMSCs). These materials have been found to affect stem cell functions via the adsorption of growth/differentiation factors on the surfaces of nanomaterials and the activation of signaling pathways that are mostly related to cell adhesion and differentiation (e.g., FAK, Smad, Erk, and Wnt).

Conclusion

Controlling stem cell differentiation using biophysical factors, especially the use of nanohybrid materials to functionalize underlying substrates wherein the cells attach and grow, is a promising strategy to achieve cells of interest in a highly efficient manner. We hope that this review will facilitate the use of other types of newly discovered and/or synthesized nanomaterials (e.g., metal transition dichalcogenides, non-toxic quantum dots, and metal oxide frameworks) for stem cell-based regenerative therapies.

A Materials Roadmap to Functional Neural Interface Design

Advancement in neurotechnologies for electrophysiology, neurochemical sensing, neuromodulation, and optogenetics are revolutionizing scientific understanding of the brain while enabling treatments, cures, and preventative measures for a variety of neurological disorders. The grand challenge in neural interface engineering is to seamlessly integrate the interface between neurobiology and engineered technology, to record from and modulate neurons over chronic timescales. However, the biological inflammatory response to implants, neural degeneration, and long-term material stability diminish the quality of interface overtime. Recent advances in functional materials have been aimed at engineering solutions for chronic neural interfaces. Yet, the development and deployment of neural interfaces designed from novel materials have introduced new challenges that have largely avoided being addressed. Many engineering efforts that solely focus on optimizing individual probe design parameters, such as softness or flexibility, downplay critical multi-dimensional interactions between different physical properties of the device that contribute to overall performance and biocompatibility. Moreover, the use of these new materials present substantial new difficulties that must be addressed before regulatory approval for use in human patients will be achievable. In this review, the interdependence of different electrode components are highlighted to demonstrate the current materials-based challenges facing the field of neural interface engineering.

Integration of organic electrochemical transistors and immuno-affinity membranes for label-free detection of interleukin-6 in the physiological concentration range through antibody–antigen recognition

A label-free immunosensor based on an organic electrochemical transistor integrated with an immuno-affinity membrane for cytokine detection at physiologically relevant concentrations is reported.

A Palladium-Binding Deltarhodopsin for Light-Activated Conversion of Protonic to Electronic Currents

Fusion of a palladium-binding peptide to an archaeal rhodopsin promotes intimate integration of the lipid-embedded membrane protein with a palladium hydride protonic contact. Devices fabricated with the palladium-binding deltarhodopsin enable light-activated conversion of protonic currents to electronic currents with on/off responses complete in seconds and a nearly tenfold increase in electrical signal relative to those made with the wild-type protein.

Grotthuss mechanisms: from proton transport in proton wires to bioprotonic devices

In 1804, Theodore von Grotthuss proposed a mechanism for proton (H(+)) transport between water molecules that involves the exchange of a covalent bond between H and O with a hydrogen bond. This mechanism also supports the transport of OH(-) as a proton hole and is essential in explaining proton transport in intramembrane proton channels. Inspired by the Grotthuss mechanism and its similarity to electron and hole transport in semiconductors, we have developed semiconductor type devices that are able to control and monitor a current of H(+) as well as OH(-) in hydrated biopolymers. In this topical review, we revisit these devices that include protonic diodes, complementary, transistors, memories and transducers as well as a phenomenological description of their behavior that is analogous to electronic semiconductor devices.

Biofunctionalization of polydioxythiophene derivatives for biomedical applications

It is becoming clear that development of biomedical devices relies on engineering of the interface between the device and the biological component. Improved performance for these sensors and devices can be achieved through biofunctionalization. In this review we focus on highlighting the biofunctionalization of polydioxythiophene sensors.

Tailoring Functional Interlayers in Organic Field-Effect Transistor Biosensors

This review aims to provide an update on the development involving dielectric/organic semiconductor (OSC) interfaces for the realization of biofunctional organic field-effect transistors (OFETs). Specific focus is given on biointerfaces and recent technological approaches where biological materials serve as interlayers in back-gated OFETs for biosensing applications. Initially, to better understand the effects produced by the presence of biomolecules deposited at the dielectric/OSC interfacial region, the tuning of the dielectric surface properties by means of self-assembled monolayers is discussed. Afterward, emphasis is given to the modification of solid-state dielectric surfaces, in particular inorganic dielectrics, with biological molecules such as peptides and proteins. Special attention is paid on how the presence of an interlayer of biomolecules and bioreceptors underneath the OSC impacts on the charge transport and sensing performance of the device. Moreover, naturally occurring materials, such as carbohydrates and DNA, used directly as bulk gating materials in OFETs are reviewed. The role of metal contact/OSC interface in the overall performance of OFET-based sensors is also discussed.

Conducting polymer-based multilayer films for instructive biomaterial coatings

Aim:

To demonstrate the design, fabrication and testing of conformable conducting biomaterials that encourage cell alignment.

Materials & methods:

Thin conducting composite biomaterials based on multilayer films of poly(3.4-ethylenedioxythiophene) derivatives, chitosan and gelatin were prepared in a layer-by-layer fashion. Fibroblasts were observed with fluorescence microscopy and their alignment (relative to the dipping direction and direction of electrical current passed through the films) was determined using ImageJ.

Results:

Fibroblasts adhered to and proliferated on the films. Fibroblasts aligned with the dipping direction used during film preparation and this was enhanced by a DC current.

Conclusion:

We report the preparation of conducting polymer-based films that enhance the alignment of fibroblasts on their surface which is an important feature of a variety of tissues.

Lay abstract: Cells inhabit environments known as the extracellular matrix (ECM) which consists of a mixture of different biomolecules, and the precise composition and topographical properties are different in different tissues (e.g., bone, brain, muscle, skin). Cells interact intimately with the ECM, not only constructing the biomolecules, but assist its organization in 3D space, and its degradation (which is important for tissue remodeling); reciprocally, cells respond to the ECM (e.g., by modifying their size, shape, etc). Cellular alignment is observed in organs and tissues such as bones, muscles and skin, and this alignment is important for the healthy functioning of the organ/tissue. Here, we present a novel method of aligning cells on biomaterials, simply by applying an electrical current through the biomaterial.

Highly stretchable gold nanobelts with sinusoidal structures for recording electrocorticograms

Rationally designed sinusoidal gold nanobelts are fabricated as stretchable electrodes, and they do not show obvious change of resistance under large deformation after 10,000 cyclic stretching/relaxing processes. As a proof of concept, they are successfully used to record intracranial electroencephalogram or electrocorticogram signals from rats.

Organic bioelectronics in infection

Organic bioelectronics is a rapidly growing field of both academic and industrial interest. Specific attributes make this class of materials particularly interesting for biomedical and medical applications, and a whole new class of biologically compatible devices is being created owing to structural and functional similarities to biological systems. In parallel, modern advances in biomedical research call for dynamically controllable systems. In infection biology, a progressing bacterial infection can be studied dynamically, at much higher resolution and on a smaller spatial scale than ever before, and it is now understood that minute changes in the tissue microenvironment play pivotal roles in the outcome of infections. This review merges the fields of infection biology and organic bioelectronics, describing the ability of conducting polymer devices to sense, modify, and interact with the infected tissue microenvironment. Though the primary focus is from the perspective of bacterial infections, general examples from cell biology and regenerative medicine are included where relevant. Spatially and temporally controlled biomimetic in vitro systems will greatly aid our molecular understanding of the infection process, thereby providing exciting opportunities for organic bioelectronics in future diagnosis and treatment of infectious diseases.

A hybrid living/organic electrochemical transistor based on the Physarum polycephalum cell endowed with both sensing and memristive properties

A hybrid bio-organic electrochemical transistor was developed by interfacing an organic semiconductor, poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate), with the Physarum polycephalum cell. The system shows unprecedented performances since it could be operated both as a transistor, in a three-terminal configuration, and as a memristive device in a two terminal configuration mode. This is quite a remarkable achievement since, in the transistor mode, it can be used as a very sensitive bio-sensor directly monitoring biochemical processes occurring in the cell, while, as a memristive device, it represents one of the very first examples of a bio-hybrid system demonstrating such a property. Our system combines memory and sensing in the same system, possibly interfacing unconventional computing. The system was studied by a full electrical characterization using a series of different gate electrodes, namely made of Ag, Au and Pt, which typically show different operation modes in organic electrochemical transistors. Our experiment demonstrates that a remarkable sensing capability could potentially be implemented. We envisage that this system could be classified as a Bio-Organic Sensing/Memristive Device (BOSMD), where the dual functionality allows merging of the sensing and memory properties, paving the way to new and unexplored opportunities in bioelectronics.

Conductive surfaces with dynamic switching in response to temperature and salt

Salt- and temperature-responsive P(PEGMMA)-based brushes were grafted from conducting polymer films to produce electroactive surfaces with tailored switching behaviour.

3D bioelectronic interface: capturing circulating tumor cells onto conducting polymer-based micro/nanorod arrays with chemical and topographical control

The three-dimensional (3D) poly(3,4-ethylenedioxythiophene) (PEDOT)-based bioelectronic interfaces (BEIs) with diverse dimensional micro/nanorod array structures, varied surface chemical pro-perties, high electrical conductivity, reversible chemical redox switching, and high optical transparency are used for capturing circulating tumor cells (CTCs). Such 3D PEDOT-based BEIs can function as an efficient clinical diagonstic and therapeutic platform.

Dynamic monitoring of Salmonella typhimurium infection of polarized epithelia using organic transistors

Ion flow across polarized epithelia is a tightly regulated process. Measurement of the transepithelial resistance is a highly relevant parameter for assessing the function or health of the tissue. Dynamic, electrical measurements of transepithelial ion flow are preferred as they provide the most accurate snapshot of effects of external stimuli. Enteric pathogens such as Salmonella typhimurium are known to disrupt ion flow in gastrointestinal epithelia. Here, for the first time, the use of organic transistors as a powerful potential alternative for front-line, disposable, high-throughput diagnostics of enteric pathogens is demonstrated. The transistors' ability to detect early and subtle changes in transepithelial ion flow is capitalized upon to develop a highly sensitive detector of epithelial integrity. Stable operation of the organic devices under physiological conditions is shown, followed by dynamic, pathogen-specific diagnosis of infection of epithelia. Further, operation of the device is possible in complex matrices, showing particular promise for food and safety applications.

A review of organic and inorganic biomaterials for neural interfaces

Recent advances in nanotechnology have generated wide interest in applying nanomaterials for neural prostheses. An ideal neural interface should create seamless integration into the nervous system and performs reliably for long periods of time. As a result, many nanoscale materials not originally developed for neural interfaces become attractive candidates to detect neural signals and stimulate neurons. In this comprehensive review, an overview of state-of-the-art microelectrode technologies provided fi rst, with focus on the material properties of these microdevices. The advancements in electro active nanomaterials are then reviewed, including conducting polymers, carbon nanotubes, graphene, silicon nanowires, and hybrid organic-inorganic nanomaterials, for neural recording, stimulation, and growth. Finally, technical and scientific challenges are discussed regarding biocompatibility, mechanical mismatch, and electrical properties faced by these nanomaterials for the development of long-lasting functional neural interfaces.

Biodegradable electroactive polymers for electrochemically-triggered drug delivery

We report biodegradable electroactive polymer (EAP)-based materials and their application as drug delivery devices.

Implementing tissue engineering and regenerative medicine solutions in medical implants

BACKGROUND

Surgical implants are widely used in the medical field but their long-term performance is limited due to failure of integration with tissues. This manuscript describes very well-known problems associated with implants and discusses novel solutions used in tissue engineering and regenerative medicine that can be implemented in this uncommonly discussed medical area.

SOURCES OF DATA

General and medical literature describing modifications of medical and surgical implants, biofunctionalization, tissue engineering and regenerative medicine.

AREAS OF AGREEMENT

Procedures for surgical implantation have grown substantially in the last few decades and provided improved quality of life for patients, regardless of area of implantation and device type and purpose.

AREAS OF CONTROVERSY

In general, implants fail because of lack of long-term integration with the surrounding tissues. Implant manufacturers have not addressed implant failure from the point of view of biointegration. In addition, some medical practitioners are inclined to treat implant failure by using anti-infection methods to prevent bacterial adhesion. However, both approaches are conceptually limited, as discussed in this manuscript.

GROWING POINTS

Implantation in the future will not be limited to medically needed procedures but also to a growing number of cosmetic body transformation procedures, which may include perceived 'improved implant functions' over natural tissues or organs. An additional trend is that implant procedures are being progressively performed in younger individuals.

AREAS TIMELY FOR DEVELOPING RESEARCH

Current implants generally do not allow the physician to have controlled long-term access to internal tissues in contact with the implants, for example to release specific compounds when medically needed to the problem area.

Patterned free-standing conductive nanofilms for ultraconformable circuits and smart interfaces

A process is presented for the fabrication of patterned ultrathin free-standing conductive nanofilms based on an all-polymer bilayer structure composed of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) and poly(lactic acid) (PEDOT:PSS/PLA). Based on the strategy recently introduced by our group for producing large area free-standing nanofilms of conductive polymers with ultrahigh conformability, here an inkjet subtractive patterning technique was used, with localized overoxidation of PEDOT:PSS that caused the local irreversible loss of electrical conductivity. Different pattern geometries (e.g., interdigitated electrodes with various spacing, etc.) were tested for validating the proposed process. The fabrication of individually addressable microelectrodes and simple circuits on nanofilm having thickness ∼250 nm has been demonstrated. Using this strategy, mechanically robust, conformable ultrathin polymer films could be produced that can be released in water as free-standing nanofilms and/or collected on surfaces with arbitrary shapes, topography and compliance, including human skin. The patterned bilayer nanofilms were characterized as regards their morphology, thickness, topography, conductivity, and electrochemical behavior. In addition, the electrochemical switching of surface properties has been evaluated by means of contact angle measurements. These novel conductive materials can find use as ultrathin, conformable electronic devices and in many bioelectrical applications. Moreover, by exploiting the electrochemical properties of conducting polymers, they can act as responsive smart biointerfaces and in the field of conformable bioelectronics, for example, as electrodes on tissues or smart conductive substrates for cell culturing and stimulation.

H+-type and OH- -type biological protonic semiconductors and complementary devices

Proton conduction is essential in biological systems. Oxidative phosphorylation in mitochondria, proton pumping in bacteriorhodopsin, and uncoupling membrane potentials by the antibiotic Gramicidin are examples. In these systems, H(+) hop along chains of hydrogen bonds between water molecules and hydrophilic residues - proton wires. These wires also support the transport of OH(-) as proton holes. Discriminating between H(+) and OH(-) transport has been elusive. Here, H(+) and OH(-) transport is achieved in polysaccharide- based proton wires and devices. A H(+)- OH(-) junction with rectifying behaviour and H(+)-type and OH(-)-type complementary field effect transistors are demonstrated. We describe these devices with a model that relates H(+) and OH(-) to electron and hole transport in semiconductors. In turn, the model developed for these devices may provide additional insights into proton conduction in biological systems.

Orthogonal patterning of multiple biomolecules using an organic fluorinated resist and imprint lithography

The ability to spatially deposit multiple biomolecules onto a single surface with high-resolution while retaining biomolecule stability and integrity is critical to the development of micro- and nanoscale biodevices. While conventional lithographic patterning methods are attractive for this application, they typically require the use of UV exposure and/or harsh solvents and imaging materials, which may be damaging to fragile biomolecules. Here, we report the development of a new patterning process based on a fluorinated patterning material that is soluble in hydrofluoroether solvents, which we show to be benign to biomolecules, including proteins and DNA. We demonstrate the implementation of these materials into an orthogonal processing system for patterning multibiomolecule arrays by imprint lithography at room temperature. We further showcase this method's capacity for fabricating patterns of receptor-specific ligands for fundamental cell studies.

Electronic and optoelectronic materials and devices inspired by nature

Inorganic semiconductors permeate virtually every sphere of modern human existence. Micro-fabricated memory elements, processors, sensors, circuit elements, lasers, displays, detectors, etc are ubiquitous. However, the dawn of the 21st century has brought with it immense new challenges, and indeed opportunities-some of which require a paradigm shift in the way we think about resource use and disposal, which in turn directly impacts our ongoing relationship with inorganic semiconductors such as silicon and gallium arsenide. Furthermore, advances in fields such as nano-medicine and bioelectronics, and the impending revolution of the 'ubiquitous sensor network', all require new functional materials which are bio-compatible, cheap, have minimal embedded manufacturing energy plus extremely low power consumption, and are mechanically robust and flexible for integration with tissues, building structures, fabrics and all manner of hosts. In this short review article we summarize current progress in creating materials with such properties. We focus primarily on organic and bio-organic electronic and optoelectronic systems derived from or inspired by nature, and outline the complex charge transport and photo-physics which control their behaviour. We also introduce the concept of electrical devices based upon ion or proton flow ('ionics and protonics') and focus particularly on their role as a signal interface with biological systems. Finally, we highlight recent advances in creating working devices, some of which have bio-inspired architectures, and summarize the current issues, challenges and potential solutions. This is a rich new playground for the modern materials physicist.

Liposome sensing and monitoring by organic electrochemical transistors integrated in microfluidics

BACKGROUND

Organic electrochemical transistors (OECTs), which are becoming more and more promising devices for applications in bioelectronics and nanomedicine, are proposed here as ideally suitable for sensing and real time monitoring of liposome-based structures. This is quite relevant since, currently, the techniques used to investigate liposomal structures, their stability in different environments as well as drug loading and delivery mechanisms, operate basically off-line and/or with pre-prepared sampling.

METHODS

OECTs, based on the PEDOT:PSS conductive polymer, have been employed as sensors of liposome-based nanoparticles in electrolyte solutions to assess sensitivity and monitoring capabilities based on ion-to-electron amplified transduction.

RESULTS

We demonstrate that OECTs are very efficient, reliable and sensitive devices for detecting liposome-based nanoparticles on a wide dynamic range down to 10(-5)mg/ml (with a lowest detection limit, assessed in real-time monitoring, of 10(-7)mg/ml), thus matching the needs of typical drug loading/drug delivery conditions. They are hence particularly well suited for real-time monitoring of liposomes in solution. Furthermore, OECTs are shown to sense and discriminate successive injection of different liposomes, so that they could be good candidates in quality-control assays or in the pharmaceutical industry.

GENERAL SIGNIFICANCE

Drug loading and delivery by liposome-based structures is a fast growing and very promising field that will strongly benefit from real-time, highly sensitive and low cost monitoring of their dynamics in different pharma and biomedical environments, with a particular reference to the pharmaceutical and production processes, where a major issue is monitoring and measuring the formation and concentration of liposomes and the relative drug load. The demonstrated ability to sense and monitor complex bio-structures, such as liposomes, paves the way for very promising developments in biosensing and nanomedicine. This article is part of a Special Issue entitled Organic Bioelectronics-Novel Applications in Biomedicine.

Bioelectronics meets nanomedicine for cardiovascular implants: PEDOT-based nanocoatings for tissue regeneration

BACKGROUND

An exciting direction in nanomedicine would be to analyze how living cells respond to conducting polymers. Their application for tissue regeneration may advance the performance of drug eluting stents by addressing the delayed stent re-endothelialization and late stent thrombosis.

METHODS

The suitability of poly (3, 4-ethylenedioxythiophene) (PEDOT) thin films for stents to promote cell adhesion and proliferation is tested in correlation with doping and physicochemical properties. PEDOT doped either with poly (styrenesulfonate) (PSS) or tosylate anion (TOS) was used for films' fabrication by spin coating and vapor phase polymerization respectively. PEGylation of PEDOT: TOS for reduced immunogenicity and biofunctionalization of PEDOT: PSS with RGD peptides for induced cell proliferation was further applied. Atomic Force Microscopy and Spectroscopic Ellipsometry were implemented for nanotopographical, structural, optical and conductivity measurements in parallel with wettability and protein adsorption studies. Direct and extract testing of cell viability and proliferation of L929 fibroblasts on PEDOT samples by MTT assay in line with SEM studies follow.

RESULTS

All PEDOT thin films are cytocompatible and promote human serum albumin adsorption. PEDOT:TOS films were found superior regarding cell adhesion as compared to controls. Their nanotopography and hydrophilicity are significant factors that influence cytocompatibility. PEGylation of PEDOT:TOS increases their conductivity and hydrophilicity with similar results on cell viability with bare PEDOT:TOS. The biofunctionalized PEDOT:PSS thin films show enhanced cell proliferation.

CONCLUSIONS

The application of PEDOT polymers has evolved as a new perspective to advance stents.

GENERAL SIGNIFICANCE

In this work, nanomedicine involving nanotools and novel nanomaterials merges with bioelectronics to stimulate tissue regeneration for cardiovascular implants. This article is part of a Special Issue entitled Organic Bioelectronics - Novel Applications in Biomedicine.