Different modes of membrane permeabilization by two RTX toxins: HlyA from Escherichia coli and CyaA from Bordetella pertussis

A membrane localized RTX-like protein mediates physiochemical properties of the Pantoea stewartii subsp. stewartii cell envelope that impact surface adhesion, cell surface hydrophobicity and plant colonization

Pantoea stewartii subsp. stewartii (Pnss), is the bacterial causal agent of Stewart's wilt of sweet corn. Disease symptoms include systemic wilting and foliar, water-soaked lesions. A Repeat-in-toxin (RTX)-like protein, RTX2, causes cell leakage and collapse in the leaf apoplast of susceptible corn varieties and is a primary mediator of water-soaked lesion formation in the P. stewartii-sweet corn pathosystem. RTX toxins comprise a large family of proteins, which are widely distributed among Gram-negative bacteria. These proteins are generally categorized as cellulolysins, but the Biofilm-Associated Proteins (Bap) subfamily of RTX toxins are implicated in surface adhesion and other biofilm behaviors. The Pnss RTX2 is most phylogenetically related to other Bap proteins suggesting that Pnss RTX2 plays a dual role in adhesion to host surfaces in addition to mediating the host cell lysis that leads to water-soaked lesion formation. Here we demonstrated that RTX2 localizes to the bacterial cell envelope and influences physiochemical properties of the bacterial cell envelope that impact bacterial cell length, cell envelope integrity and overall cellular hydrophobicity. Interestingly, the role of RTX2 as an adhesin was only evident in absence of exopolysaccharide (EPS) production suggesting that RTX2 plays a role as an adhesin early in biofilm development before EPS production is fully induced. However, deletion of rtx2 severely impacted Pnss' colonization of the xylem suggesting that the dual role of RTX2 as a cytolysin and adhesin is a mechanism that links the apoplastic water-soaked lesion phase of infection to the wilting phase of the infection in the xylem.

The Mechanism of Membrane Permeabilization by Peptides: Still an Enigma

Peptide-induced permeabilization of lipid vesicles has been measured for decades and has provided many insights into the sequence-structure-function relationships of membrane-active peptides. However, researchers in the field have noted that many experiments show transient permeabilization, in which a burst of leakage occurs immediately after peptide addition, followed by a slowdown or cessation of leakage before all contents have been released. This widely observed, but rarely studied, phenomenon is not explained by standard equilibrium pore models that are commonly invoked in both experimental and computational studies. Here we discuss observations of transient permeabilization, and we outline a pathway towards understanding this enigmatic phenomenon.

Liposomes as models for membrane integrity

Biological membranes form the boundaries to cells. They are integral to cellular function, retaining the valuable components inside and preventing access of unwanted molecules. Many different classes of molecules demonstrate disruptive properties to the plasma membrane. These include alcohols, detergents and antimicrobial agents. Understanding this disruption and the mechanisms by which it can be mitigated is vital for improved therapeutics as well as enhanced industrial processes where the compounds produced can be toxic to the membrane. This mini-review describes the most common molecules that disrupt cell membranes along with a range of in vitro liposome-based techniques that can be used to monitor and delineate these disruptive processes.

Membrane Permeabilization by Bordetella Adenylate Cyclase Toxin Involves Pores of Tunable Size

RTX (Repeats in ToXin) pore-forming toxins constitute an expanding family of exoproteins secreted by many Gram-negative bacteria and involved in infectious diseases caused by said pathogens. Despite the relevance in the host/pathogen interactions, the structure and characteristics of the lesions formed by these toxins remain enigmatic. Here, we capture the first direct nanoscale pictures of lytic pores formed by an RTX toxin, the Adenylate cyclase (ACT), secreted by the whooping cough bacterium Bordetella pertussis. We reveal that ACT associates into growing-size oligomers of variable stoichiometry and heterogeneous architecture (lines, arcs, and rings) that pierce the membrane, and that, depending on the incubation time and the toxin concentration, evolve into large enough “holes” so as to allow the flux of large molecular mass solutes, while vesicle integrity is preserved. We also resolve ACT assemblies of similar variable stoichiometry in the cell membrane of permeabilized target macrophages, proving that our model system recapitulates the process of ACT permeabilization in natural membranes. Based on our data we propose a non-concerted monomer insertion and sequential mechanism of toroidal pore formation by ACT. A size-tunable pore adds a new regulatory element to ACT-mediated cytotoxicity, with different pore sizes being putatively involved in different physiological scenarios or cell types.

Mechanistic Landscape of Membrane-Permeabilizing Peptides

Membrane permeabilizing peptides (MPPs) are as ubiquitous as the lipid bilayer membranes they act upon. Produced by all forms of life, most membrane permeabilizing peptides are used offensively or defensively against the membranes of other organisms. Just as nature has found many uses for them, translational scientists have worked for decades to design or optimize membrane permeabilizing peptides for applications in the laboratory and in the clinic ranging from antibacterial and antiviral therapy and prophylaxis to anticancer therapeutics and drug delivery. Here, we review the field of membrane permeabilizing peptides. We discuss the diversity of their sources and structures, the systems and methods used to measure their activities, and the behaviors that are observed. We discuss the fact that "mechanism" is not a discrete or a static entity for an MPP but rather the result of a heterogeneous and dynamic ensemble of structural states that vary in response to many different experimental conditions. This has led to an almost complete lack of discrete three-dimensional active structures among the thousands of known MPPs and a lack of useful or predictive sequence-structure-function relationship rules. Ultimately, we discuss how it may be more useful to think of membrane permeabilizing peptides mechanisms as broad regions of a mechanistic landscape rather than discrete molecular processes.

Calcium enhances binding of Clostridium perfringens epsilon toxin to sulfatide

Epsilon toxin (Etx) from Clostridium perfringens is synthesized as a very low-active prototoxin form (proEtx) that becomes active upon proteolytic activation and has the capacity to cross the blood-brain barrier (BBB), thereby producing severe neurological effects. The identity and requirements of host receptors of Etx remain a matter of controversy. In the present study, we analysed the binding of proEtx or Etx to liposomes containing distearoylphosphatidylcholine (DSPC), cholesterol and sulfatide, or alternatively to detergent-solubilized lipids, using surface plasmon resonance (SPR). We also tested the influence of calcium on Etx or proEtx binding. Our findings show that the presence of sulfatide in liposomes increases both Etx and proEtx binding, and Etx binding is enhanced by calcium. These results were corroborated when SPR was conducted with immobilized toxin, since detergent-solubilized sulfatide increases its binding to Etx in the presence of calcium, but not to proEtx. Moreover, binding affinity is also affected, since the treatment of liposomes with sulfatase causes the dissociation rate constants (K_D) in both proEtx and Etx to increase, especially in the case of proEtx in the presence of calcium. In addition, protein-lipid overlay assays corroborated the calcium-induced enhancement of Etx binding to sulfatide, and to lipids extracted from sulfatide-enriched rat brain lipid rafts. In conclusion, the present work highlights the role of sulfatide as an important element in the pathophysiology of Etx and reveals the influence of calcium in the interaction of Etx, but not of proEtx, with the target membrane.

Structure-Function Relationships Underlying the Capacity of Bordetella Adenylate Cyclase Toxin to Disarm Host Phagocytes

Bordetellae, pathogenic to mammals, produce an immunomodulatory adenylate cyclase toxin-hemolysin (CyaA, ACT or AC-Hly) that enables them to overcome the innate immune defense of the host. CyaA subverts host phagocytic cells by an orchestrated action of its functional domains, where an extremely catalytically active adenylyl cyclase enzyme is delivered into phagocyte cytosol by a pore-forming repeat-in-toxin (RTX) cytolysin moiety. By targeting sentinel cells expressing the complement receptor 3, known as the CD11b/CD18 (α_Mβ₂) integrin, CyaA compromises the bactericidal functions of host phagocytes and supports infection of host airways by Bordetellae. Here, we review the state of knowledge on structural and functional aspects of CyaA toxin action, placing particular emphasis on signaling mechanisms by which the toxin-produced 3',5'-cyclic adenosine monophosphate (cAMP) subverts the physiology of phagocytic cells.

Membrane phase characteristics control NA-CATH activity

Our studies presented in this report focus on the behavior of NA-CATH, an α-helical cathelicidin antimicrobial peptide, originally discovered in the Naja atra snake. It has demonstrated high potency against gram-positive and gram-negative bacteria with minimal hemolysis. Here we examine the kinetics, behaviors and potential mechanisms of the peptide in the presence of membrane liposome, modeling Escherichia coli, whose membrane exhibits distinct lipid phases. To understand NA-CATH interactions, the role of lipid phases is critical. We test three different lipid compositions to detangle the effect of phase on NA-CATH's activity using a series of leakage experiments. From these studies, we observe that NA-CATH changes from membrane disruption to pore-based lysing, depending on phases and lipid composition. This behavior also plays a major role in its kinetics.

A simple drug anchoring microfiber scaffold for chondrocyte seeding and proliferation

The structural properties of microfiber meshes made from poly(2-hydroxyethyl methacrylate) (PHEMA) were found to significantly depend on the chemical composition and subsequent cross-linking and nebulization processes. PHEMA microfibres showed promise as scaffolds for chondrocyte seeding and proliferation. Moreover, the peak liposome adhesion to PHEMA microfiber scaffolds observed in our study resulted in the development of a simple drug anchoring system. Attached foetal bovine serum-loaded liposomes significantly improved both chondrocyte adhesion and proliferation. In conclusion, fibrous scaffolds from PHEMA are promising materials for tissue engineering and, in combination with liposomes, can serve as a simple drug delivery tool.

Identification of a region that assists membrane insertion and translocation of the catalytic domain of Bordetella pertussis CyaA toxin

The adenylate cyclase (CyaA) toxin, one of the virulence factors secreted by Bordetella pertussis, the pathogenic bacteria responsible for whooping cough, plays a critical role in the early stages of respiratory tract colonization by this bacterium. The CyaA toxin is able to invade eukaryotic cells by translocating its N-terminal catalytic domain directly across the plasma membrane of the target cells, where, activated by endogenous calmodulin, it produces supraphysiological levels of cAMP. How the catalytic domain is transferred from the hydrophilic extracellular medium into the hydrophobic environment of the membrane and then to the cell cytoplasm remains an unsolved question. In this report, we have characterized the membrane-interacting properties of the CyaA catalytic domain. We showed that a protein covering the catalytic domain (AC384, encompassing residues 1-384 of CyaA) displayed no membrane association propensity. However, a longer polypeptide (AC489), encompassing residues 1-489 of CyaA, exhibited the intrinsic property to bind to membranes and to induce lipid bilayer destabilization. We further showed that deletion of residues 375-485 within CyaA totally abrogated the toxin's ability to increase intracellular cAMP in target cells. These results indicate that, whereas the calmodulin dependent enzymatic domain is restricted to the amino-terminal residues 1-384 of CyaA, the membrane-interacting, translocation-competent domain extends up to residue 489. This thus suggests an important role of the region adjacent to the catalytic domain of CyaA in promoting its interaction with and its translocation across the plasma membrane of target cells.

The effect of the placement and total charge of the basic amino acid clusters on antibacterial organism selectivity and potency

Extensive circular dichroism, isothermal titration calorimetry and induced calcein leakage studies were conducted on a series of antimicrobial peptides (AMPs), with a varying number of Lys residues located at either the C-terminus or the N-terminus to gain insight into their effect on the mechanisms of binding with zwitterionic and anionic membrane model systems. Different CD spectra were observed for these AMPs in the presence of zwitterionic DPC and anionic SDS micelles indicating that they adopt different conformations on binding to the surfaces of zwitterionic and anionic membrane models. Different CD spectra were observed for these AMPs in the presence of zwitterionic POPC and anionic mixed 4:1 POPC/POPG LUVs and SUVs, indicating that they adopt very different conformations on interaction with these two types of LUVs and SUVs. In addition, ITC and calcein leakage data indicated that all the AMPs studied interact via very different mechanisms with anionic and zwitterionic LUVs. ITC data suggest these peptides interact primarily with the surface of zwitterionic LUVs while they insert into and form pores in anionic LUVs. CD studies indicated that these compounds adopt different conformations depending on the ratio of POPC to POPG lipids present in the liposome. There are detectable spectroscopic and thermodynamic differences between how each of these AMPs interacts with membranes, that is position and total charge density defines how these AMPs interact with specific membrane models and thus partially explain the resulting diversity of antibacterial activity of these compounds.

All-or-none versus graded: single-vesicle analysis reveals lipid composition effects on membrane permeabilization

We report a single-vesicle approach to compare the all-or-none and graded mechanisms of lipid bilayer permeabilization by CpreTM and NpreTM, two peptides derived from the membrane-proximal external region of the HIV fusion glycoprotein gp41 subunit. According to bulk requenching assays, these peptides permeabilize large unilamellar vesicles via all-or-none and graded mechanisms, respectively. Visualization of the process using giant unilamellar vesicles shows that the permeabilization of individual liposomes by these two peptides differs in kinetics, degree of dye filling, and stability of the permeabilized state. All-or-none permeabilization by CpreTM is characterized by fast and total filling of the individual vesicles. This process is usually accompanied by the formation of stably open pores, as judged from the capacity of the vesicles to incorporate a second dye added after several hours. In contrast, graded permeabilization by NpreTM is transient and exhibits slower kinetics, which leads to partial filling of the individual liposomes. Of importance, quantitative analysis of vesicle population distribution allowed the identification of mixed mechanisms of membrane permeabilization and the assessment of cholesterol effects. Specifically, the presence of this viral envelope lipid increased the stability of the permeating structures, which may have implications for the fusogenic activity of gp41.

Characterization of the regions involved in the calcium-induced folding of the intrinsically disordered RTX motifs from the bordetella pertussis adenylate cyclase toxin

Repeat in toxin (RTX) motifs are nonapeptide sequences found among numerous virulence factors of Gram-negative bacteria. In the presence of calcium, these RTX motifs are able to fold into an idiosyncratic structure called the parallel beta-roll. The adenylate cyclase toxin (CyaA) produced by Bordetella pertussis, the causative agent of whooping cough, is one of the best-characterized RTX cytolysins. CyaA contains a C-terminal receptor domain (RD) that mediates toxin binding to the eukaryotic cell receptor. The receptor-binding domain is composed of about forty RTX motifs organized in five successive blocks (I to V). The RTX blocks are separated by non-RTX flanking regions of variable lengths. It has been shown that block V with its N- and C-terminal flanking regions constitutes an autonomous subdomain required for the toxicity of CyaA. Here, we investigated the calcium-induced biophysical changes of this subdomain to identify the respective contributions of the flanking regions to the folding process of the RTX motifs. We showed that the RTX polypeptides, in the absence of calcium, exhibited the hallmarks of intrinsically disordered proteins and that the C-terminal flanking region was critical for the calcium-dependent folding of the RTX polypeptides, while the N-terminal flanking region was not involved. Furthermore, the secondary and tertiary structures were acquired concomitantly upon cooperative binding of several calcium ions. This suggests that the RTX polypeptide folding is a two-state reaction, from a calcium-free unfolded state to a folded and compact conformation, in which the calcium-bound RTX motifs adopt a beta-roll structure. The relevance of these results to the toxin physiology, in particular to its secretion, is discussed.