Artificial biomembrane based on DPPC — Investigation into phase transition and thermal behavior through ellipsometric techniques

Influence of Potassium Ions on Act of Amphotericin B to the DPPC/Chol Mixed Monolayer at Different Surface Pressures

Amphotericin B (AmB) is an antifungal drug that rarely develops resistance. It has an affinity with the cholesterol on mammalian cell membranes, disrupting the structure and function of the membranes, which are also affected by potassium ions. However, the mechanism is unclear. In this paper, the Langmuir monolayer method was used to study the effects of potassium ions on the surface pressure–mean molecular area of isotherms, elastic modulus and the surface pressure–time curves of a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol (DPPC/Chol) monolayer and a DPPC/Chol/AmB monolayer. The morphology and thickness of the Langmuir–Blodgett films were studied via atomic force microscopy. The results showed that AmB can increase the mean molecular area of the DPPC/Chol mixed monolayer at low pressures (15 mN/m) but reduces it at high pressures (30 mN/m). The potassium ions may interfere with the effect of AmB in different ways. The potassium ions can enhance the influence of AmB on the stability of monolayer at low surface pressures, but weaken it at high surface pressures. The potassium ions showed significant interference with the interaction between AmB and the cholesterol-enriched region. The results are helpful for us to understand how the effect of amphotericin B on the phospholipid membrane is interfered with by potassium ions when amphotericin B enters mammalian cell membrane.

Influence of amphotericin B on the DPPC/DOPC/sterols mixed monolayer in the presence of calcium ions

Amphotericin B, an acquainted antifungal drug, has reattracted the attention of most scholars due to its one important advantage of making the fungus less resistant. Amphotericin B's antifungal properties are derived from its ability to interact with ergosterols on the fungal cells' membrane to form pores. However, the cholesterol in the human cell membranes is similar in structure to ergosterol, which cause the drug to produce certain toxicity and make the clinical use of amphotericin B limited. The study of the interaction between amphotericin B and lipid monolayer in the presence of cholesterol or ergosterol is crucial to understanding the mechanism of effect of the drug on cell membranes. Langmuir monolayer as a model for half of cell membranes can precisely control the proportion of components and the solution environment, which has been used to do a lot of research about the interaction of amphotericin B with lipids. It is noteworthy that some ions associated with life activities play an important role in it, such as calcium ions. In this work, the surface pressure-mean molecular area isotherms, elastic modulus and the surface pressure-time curves of DPPC/DOPC/sterol mixed monolayer with or without amphotericin B were studied in the different concentration of calcium ions. The morphology of the Langmuir-Blodgett films transferred on the mica were observed by atomic force microscopy. The results shown that AmB changed the elastic modulus and surface morphology of DPPC/DOPC/sterol mxied monolayer, which was significantly different with different types of sterols. Calcium ions can regulate the effect of this drug, which was clearly different due to different types of sterols. This work provides useful information to further understand the influence mechanism of calcium ions on the interaction between AmB and phospholipid/sterol monolayer, which is helpful to find out the effect mechanism of calcium ion on the interaction between AmB and phospholipid monolayer containing ergosterol or cholesterol and to understand the mechanism of AmB influencing on the membrane of fungal or human cells.

Near-field studies of anisotropic variations and temperature-induced structural changes in a supported single lipid bilayer

Temperature-controlled polarization modulation near-field scanning optical microscopy measurements of a single supported L_{β^{'}} 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid bilayer are presented. The effective retardance (S=2π(n_{e}-n_{o})t/λ, where t is the thickness of the bilayer and λ is the wavelength of light used) and the direction of the projection of the acyl chains (θ) were measured simultaneously. We demonstrate how one is able to align the system over the sample and measure a relative retardance ΔS, a crucial step in performing temperature-controlled experiments. Maps of ΔS and θ, with a lateral resolution on the order of ∼100 nm are presented, highlighting variations deriving from changes in the average molecular orientation across a lipid membrane at room temperature. A discussion of how this information can be used to map the average three-dimensional orientation of the molecules is presented. From ΔS and the known thickness of the membrane t the birefringence (n_{e}-n_{o}) of the bilayer was determined. Temperature-controlled measurements yielded a change of ΔS∼(3.8±0.3) mrad at the main transition temperature (T_{m}∼41^{∘}C) of a single planar bilayer of DPPC, where the membrane transitioned between the gel L_{β^{'}} to liquid disorder L_{α} state. The result agrees well with previous values of (n_{e}-n_{o}) in the L_{β^{'}} phase and translates to an assumed average acyl chain orientation relative to the membrane normal (〈ϕ〉∼32^{∘}) when T<T_{m} and 0^{∘} when T>T_{m}. Evidence of super heating and cooling are presented. A discussion on how the observed behavior as T_{m} is approached, could relate to the existence of varying microconfigurations within the lipid bilyer are presented. This conversation includes ideas from a Landau-Ginzburg picture of first-order phase transitions in nematic-to-isotropic systems.

Fluorescent-Based Thermal Sensing in Lipid Membranes

Thermal mapping in biological membranes could unlock and help us understand many chemical and physical processes that do not only pertain to localized membrane phenomena but also extend to many other intra- and extracellular pathways. In this manuscript, we report the development of a ratiometric thermal fluorescent probe based on the Förster resonance energy transfer between a lipid-embedded conjugated polyelectrolyte and a lyophilic acceptor dye. We showed that the Förster resonance energy transfer (FRET) pair is sensitive within the relevant physiological temperature window (20.0-50.0 °C). The signal was also shielded from an external pH and stable when cycled multiple times. The probe was also sensitive to the membrane composition and could, therefore, be further developed to probe the membrane composition and viscosity.

Thermal Response Analysis of Phospholipid Bilayers Using Ellipsometric Techniques

Biomimetic planar artificial membranes have been widely studied due to their multiple applications in several research fields. Their humectation and thermal response are crucial for reaching stability; these characteristics are related to the molecular organization inside the bilayer, which is affected by the aliphatic chain length, saturations, and molecule polarity, among others. Bilayer stability becomes a fundamental factor when technological devices are developed—like biosensors—based on those systems. Thermal studies were performed for different types of phosphatidylcholine (PC) molecules: two pure PC bilayers and four binary PC mixtures. These analyses were carried out through the detection of slight changes in their optical and structural parameters via Ellipsometry and Surface Plasmon Resonance (SPR) techniques. Phospholipid bilayers were prepared by Langmuir-Blodgett technique and deposited over a hydrophilic silicon wafer. Their molecular inclination degree, mobility, and stability of the different phases were detected and analyzed through bilayer thickness changes and their optical phase-amplitude response. Results show that certain binary lipid mixtures—with differences in its aliphatic chain length—present a co-existence of two thermal responses due to non-ideal mixing.

Specific electrical capacitance and voltage breakdown as a function of temperature for different planar lipid bilayers

The breakdown voltage and specific electrical capacitance of planar lipid bilayers formed from lipids isolated from the membrane of archaeon Aeropyrum pernix K1 as a function of temperature were studied and compared with data obtained previously in MD simulation studies. Temperature dependence of breakdown voltage and specific electrical capacitance was measured also for dipalmitoylphosphatidylcholine (DPPC) bilayers and bilayers formed from mixture of diphytanoylphosphocholine (DPhPC) and DPPC in ratio 80:20. The breakdown voltage of archaeal lipids planar lipid bilayers is more or less constant until 50°C, while at higher temperatures a considerable drop is observed, which is in line with the results from MD simulations. The breakdown voltage of DPPC planar lipid bilayer at melting temperature is considerably higher than in the gel phase. Specific electrical capacitance of planar lipid bilayers formed from archaeal lipids is approximately constant for temperatures up to 40°C and then gradually decreases. The difference with MD simulation predictions is discussed. Specific electrical capacitance of DPPC planar lipid bilayers in fluid phase is 1.75 times larger than that of the gel phase and it follows intermediated phases before phase transition. Increase in specific electrical capacitance while approaching melting point of DPPC is visible also for DPhPC:DPPC mixture.

Electrospinning deposition of hydrogel fibers used as scaffold for biomembranes. Thermal stability of DPPC corroborated by ellipsometry

DPPC bilayers were deposited over thin hydrogel scaffolds using the Langmuir-Blodgett technique (with DPPC thickness ∼ 6.2 nm). Wrinkled hydrogels films were used to maintain a moist environment in order to enhance DPPC bilayer stability. Polymer mixtures were prepared using HEMA (as a base monomer) and DEGDMA, PEGDA575, PEGDA700 or AAm (as crosslinking agents); a thermal initiator was added to obtain a final pre-hydrogel (oligomer) with an adequate viscosity for thin film formation. This mixture was deposited as wrinkled film/fibers over hydrophilic silicon wafers using an electrospinning technique. Later, these samples were exposed to UV light to trigger photopolymerization, generating crosslinking bonds between hydrogel chains; this process also generated remnant surface stresses in the films that favored wrinkle formation. In the cases where DEGDMA and AAm were used as crosslinking agents, HEMA was added in higher amounts. The resultant polymer film surface showed homogenous layering with some small isolated clusters. If PEGDA575/700 was used as the crosslinking agent, we observed the formation of polymer wrinkled thin films, composed by main and secondary chains (with different dimensions). Moreover, water absorption and release was found to be mediated through surface morphology, ordering and film thickness. The thermal behavior of biomembranes was examined using ellipsometry techniques under controlled heating cycles, allowing phases and phase transitions to be detected through slight thickness variations with respect to temperature. Atomic force microscopy was used to determinate surface roughness changes according to temperature variation, temperature was varied sufficiently for the detection and recording of DPPC phase limits. Contact angle measurements corroborated and quantified system wettability, supporting the theory that wrinkled hydrogel films act to enhance DPPC bilayer stability during thermal cycles.