trans-2-Aminocyclohexanol-based amphiphiles as highly efficient helper lipids for gene delivery by lipoplexes

A convenient method for the relative and absolute quantification of lipid components in liposomes by 1H- and 31P NMR-spectroscopy

OBJECTIVE

Liposomes are promising delivery systems for pharmaceutical applications and have been used in medicine in the recent past. Preparation of liposomes requires reliable characterization and quantification of the phospholipid components for which the traditional cumbersome molybdate method is used frequently. The objective was to improve relative and absolute quantification of lipid components from liposomes.

METHODS

A reliable method for quantification of lipid composition in liposome formulations in the 1-10 μmol range with 1H- and 31P NMR spectroscopy at 600 MHz has been developed. The method is based on three crystalline small-molecule standards (Ph3PO4, (Tol)3PO4, and Ph3PO) in CDCl3.

RESULTS

Excellent calibration linearity and chemical stability of the standards was observed. The method was tested in blind fashion on liposomes containing POPC, PEG-ceramide and a pH-sensitive trans-aminocyclohexanol-based amphiphile (TACH).1 Relative quantification (percentage of components) as well as determination of absolute lipid amount was possible with excellent reproducibility with an average error of 5%. Quantification (triplicate) was accomplished in 15 min based on 1H NMR and in 1 h based on 31P NMR. Very little change in mixture composition was observed over multiple preparative steps.

CONCLUSION

Liposome preparations containing POPC, POPE, DOPC, DPPC, TACH, and PEG-ceramide can be reliably characterized and quantified by 1H NMR and 31P NMR spectroscopy at 600 MHz in the μmol range.

A True Reverse Anomeric Effect Does Exist After All: A Hydrogen Bonding Stereocontrolling Effect in 2-Iminoaldoses

The reverse anomeric effect is usually associated with the equatorial preference of nitrogen substituents at the anomeric center. Once postulated as another anomeric effect with explanations ranging from electrostatic interactions to delocalization effects, it is now firmly considered to be essentially steric in nature. Through an extensive research on aryl imines from 2-amino-2-deoxyaldoses, spanning nearly two decades, we realized that such substances often show an anomalous anomeric behavior that cannot easily be rationalized on the basis of purely steric grounds. The apparent preference, or stabilization, of the β-anomer takes place to an extent that not only neutralizes but also overcomes the normal anomeric effect. Calculations indicate that there is no stereoelectronic effect opposing the anomeric effect, resulting from the repulsion between electron lone pairs on the imine nitrogen and the endocyclic oxygen. Such data and compelling structural evidence unravel why the exoanomeric effect is largely inhibited. We are now confident, as witnessed by 2-iminoaldoses, that elimination of the exo-anomeric effect in the α-anomer is due to the formation of an intramolecular hydrogen bond between the anomeric hydroxyl and the iminic nitrogen, thereby accounting for a true electronic effect. In addition, discrete solvation may help justify the observed preference for the β-anomer.

Ring-System-Based Conformational Switches and their Applications in Sensing and Liposomal Drug Delivery

In the past decades, a great number of stimuli-responsive systems have been developed to be used as drug-delivery systems with high sensitivity and selectivity in targeted therapy. Despite promising results, the current stimuli-responsive systems suffer from the complexity of preparation, as most novel stimuli-responsive systems are based on polymers. Small molecules have often been neglected as candidates for application for stimuli-responsive systems. Recently, structures based on six-membered ring molecules or bicyclic molecules have been developed into conformational switches working through conformational interconversion. These single conformational switches have significantly reduced the complexity of material preparation compared to polymers or copolymers. In this review, we focus on ring-system-based conformational switches that are involved in sensors and smart drug-delivery systems. We hope that this review will shed light on ring-system-based single conformational switches for use in the development of stimuli-responsive systems.

1 Introduction2 Conformation Switches Based On Bispidine Derivatives3 Conformation Switches Based On Cycloalkanes4 Conformation Switches Based On Carbohydrates5 Conclusion

Poly (Thioether-Polyesters) Micelles Encapsulation Induces ROS-Triggered Targeted Release of Tangeretin

Tangeretin (Tan) possesses great anti-oxidation and anti-inflammation bioactivities; however, it is accompanied by poor water solubility, which leads to inefficient cellular internalization. To address this issue, a reactive oxygen species (ROS)-triggered poly (thioether-polyesters) micelle (PDHP, PEG-DTT) was designed and prepared via self-assembly, which consisted of poly (thioether-polyesters) as the hydrophilic shell, and the drug Tan as the hydrophobic inner core. The micelles (Tan@ PDHP), with a 63.15% loading efficiency of Tan, showed negligible cytotoxicity, high stability in phosphate-buffered saline buffer (pH  =  7.4), and continuous release of Tan with the stimulation of H2O2. In addition, this Tan loading micelle was more efficient in responding to the formation of ROS in the lipopolysaccharide-stimulated RAW264.7 cells compared to that of the free Tan. In short, the strategy of encapsulating the low solubility Tan in ROS-triggered poly (thioether-polyesters) micelles provides an effective assay of enhancing Tan's antioxidative activity.

Carbohydrate-Derived Metal-Chelator-Triggered Lipids for Liposomal Drug Delivery

Liposomes are versatile three-dimensional, biomaterial-based frameworks that can spatially enclose a variety of organic and inorganic biomaterials for advanced targeted-delivery applications. Implementation of external-stimuli-controlled release of their cargo will significantly augment their wide application for liposomal drug delivery. This paper presents the synthesis of a carbohydrate-derived lipid, capable of changing its conformation depending on the presence of Zn²⁺ : an active state in the presence of Zn²⁺ ions and back to an inactive state in the absence of Zn²⁺ or when exposed to Na₂ EDTA, a metal chelator with high affinity for Zn²⁺ ions. This is the first report of a lipid triggered by the presence of a metal chelator. Total internal reflection fluorescence microscopy and a single-liposome study showed that it indeed was possible for the lipid to be incorporated into the bilayer of stable liposomes that remained leakage-free for the fluorescent cargo of the liposomes. On addition of EDTA to the liposomes, their fluorescent cargo could be released as a result of the membrane-incorporated lipids undergoing a conformational change.

Cationic lipids for gene delivery: many players, one goal

Lipid-based carriers represent the most widely used alternative to viral vectors for gene expression and gene silencing purposes. This class of non-viral vectors is particularly attractive for their ease of synthesis and chemical modifications to endow them with desirable properties. Despite combinatorial approaches have led to the generation of a large number of cationic lipids displaying different supramolecular structures and improved behavior, additional effort is needed towards the development of more and more effective cationic lipids for transfection purposes. With this review, we seek to highlight the great progress made in the design of each and every constituent domain of cationic lipids, that is, the chemical structure of the headgroup, linker and hydrophobic moieties, and on the specific effect on the assembly with nucleic acids. Since the complexity of such systems is known to affect their performances, the role of formulation, stability and phase behavior on the transfection efficiency of such assemblies will be thoroughly discussed. Our objective is to provide a conceptual framework for the development of ever more performing lipid gene delivery vectors.

Easy access to a carbohydrate-based template for stimuli-responsive surfactants

In this paper we describe the synthesis of a new carbohydrate-based building block functionalized with azido or amino groups on the 2 and 4 positions. The building block can be synthesized in anomerically pure form in only five scalable steps starting from commercially available levoglucosan. It was shown that the building block could undergo alkylations under strongly basic conditions. The building block with azido groups could furthermore take part in CuAAC reactions, generating derivatives with ester or carboxylic acid functionalities. In addition, the anomeric mixture of the building block was used for the synthesis of a molecule that could act as an emulsifier only in the presence of Zn²⁺ ions.

Strategies for altering lipid self-assembly to trigger liposome cargo release

While liposomes have proven to be effective drug delivery nanocarriers, their therapeutic attributes could be improved through the development of clinically viable triggered release strategies in which encapsulated drug contents could be selectively released at the sites of diseased cells. As such, a significant amount of research has been reported involving the development of stimuli-responsive liposomes and a broad range of strategies have been explored for driving content release. These have included the introduction of trigger groups at either the lipid headgroup or within the acyl chains that alter lipid self-assembly properties of known lipids as well as the rational design of lipid analogs programed to undergo conformational changes induced by events such as binding interactions. This review article describes advances in the design of stimuli-responsive liposome strategies with an eye towards emerging trends in the field.

Pharmaceutical Applications of Molecular Tweezers, Clefts and Clips

Synthetic acyclic receptors, composed of two arms connected with a spacer enabling molecular recognition, have been intensively explored in host-guest chemistry in the past decades. They fall into the categories of molecular tweezers, clefts and clips, depending on the geometry allowing the recognition of various guests. The advances in synthesis and mechanistic studies have pushed them forward to pharmaceutical applications, such as neurodegenerative disorders, infectious diseases, cancer, cardiovascular disease, diabetes, etc. In this review, we provide a summary of the synthetic molecular tweezers, clefts and clips that have been reported for pharmaceutical applications. Their structures, mechanism of action as well as in vitro and in vivo results are described. Such receptors were found to selectively bind biological guests, namely, nucleic acids, sugars, amino acids and proteins enabling their use as biosensors or therapeutics. Particularly interesting are dynamic molecular tweezers which are capable of controlled motion in response to an external stimulus. They proved their utility as imaging agents or in the design of controlled release systems. Despite some issues, such as stability, cytotoxicity or biocompatibility that still need to be addressed, it is obvious that molecular tweezers, clefts and clips are promising candidates for several incurable diseases as therapeutic agents, diagnostic or delivery tools.

Lipid Switches: Stimuli-Responsive Liposomes through Conformational Isomerism Driven by Molecular Recognition

Advancements in the field of liposomal drug carriers have culminated in greatly improved delivery properties. An important aspect of this work entails development of designer liposomes for release of contents triggered by environmental changes. The majority of these systems are driven by chemical reactions in the presence of different stimuli. However, a promising new paradigm instead focuses on molecular recognition events as the impetus for content release. In certain cases, these platforms exploit synthetic lipid switches designed to undergo conformational changes upon binding to target ions or molecules that perturb membrane assembly, thereby triggering cargo release. Examples of this approach reported thus far showcase how rational design of lipid switches can result in dramatic changes in lipid assembly properties. These strategies show great promise for opening up new pathophysiological stimuli that can be harnessed for programmed content release in drug delivery applications.

Stimuli-responsive liposomes for drug delivery

The ultimate goal of drug delivery is to increase the bioavailability and reduce the toxic side effects of the active pharmaceutical ingredient (API) by releasing them at a specific site of action. In the case of antitumor therapy, association of the therapeutic agent with a carrier system can minimize damage to healthy, nontarget tissues, while limit systemic release and promoting long circulation to enhance uptake at the cancerous site due to the enhanced permeation and retention effect (EPR). Stimuli-responsive systems have become a promising way to deliver and release payloads in a site-selective manner. Potential carrier systems have been derived from a wide variety of materials, including inorganic nanoparticles, lipids, and polymers that have been imbued with stimuli-sensitive properties to accomplish triggered release based on an environmental cue. The unique features in the tumor microenvironment can serve as an endogenous stimulus (pH, redox potential, or unique enzymatic activity) or the locus of an applied external stimulus (heat or light) to trigger the controlled release of API. In liposomal carrier systems triggered release is generally based on the principle of membrane destabilization from local defects within bilayer membranes to effect release of liposome-entrapped drugs. This review focuses on the literature appearing between November 2008-February 2016 that reports new developments in stimuli-sensitive liposomal drug delivery strategies using pH change, enzyme transformation, redox reactions, and photochemical mechanisms of activation. WIREs Nanomed Nanobiotechnol 2017, 9:e1450. doi: 10.1002/wnan.1450 For further resources related to this article, please visit the WIREs website.

Lipoic acid functionalized amino acids cationic lipids as gene vectors

A series of reducible cationic lipids 4a-4f with different amino acid polar-head groups were prepared. The novel lipid contains a hydrophobic lipoic acid (LA) moiety, which can be reduced under reductive conditions to release of the encapsulated plasmid DNA. The particle size, zeta potential and cellular uptake of lipoplexes formed with DNA, as well as the transfection efficacy (TE) were characterized. The TE of the cationic lipid based on arginine was especially high, and was 2.5times higher than that of a branched polyethylenimine in the presence of 10% serum.

Cationic Nanoparticles Assembled from Natural-Based Steroid Lipid for Improved Intracellular Transport of siRNA and pDNA

Developing new functional biomaterials from biocompatible natural-based resources for gene/drug delivery has attracted increasing attention in recent years. In this work, we prepared a series of cationic nanoparticles (Diosarg-DOPE NPs) by assembly of a natural steroid diosgenin-based cationic lipid (Diosarg) with commercially-available helper lipid 1,2-dioleoyl-sn-glycero-3-phosphorethanolamine (DOPE). These cationic Diosarg-DOPE NPs were able to efficiently bind siRNA and plasmid DNA (pDNA) via electrostatic interactions to form stable, nano-sized cationic lipid nanoparticles instead of lamellar vesicles in aqueous solution. The average particle size, zeta potentials and morphologies of the siRNA and pDNA complexes of the Diosarg-DOPE NPs were examined. The in vitro cytotoxicity of NPs depends on the dose and assembly ratio of the Diosarg and DOPE. Notably, the intracellular transportation efficacy of the exogenesis siRNA and pDNA could be greatly improved by using the Diosarg-DOPE NPs as the cargoes in H1299 cell line. The results demonstrated that the self-assembled Diosarg-DOPE NPs could achieve much higher intracellular transport efficiency for siRNA or pDNA than the cationic lipid Diosarg, indicating that the synergetic effect of different functional lipid components may benefit the development of high efficiency nano-scaled gene carriers. Moreover, it could be noted that the traditional "lysosome localization" involved in the intracellular trafficking of the Diosarg and Diosarg-DOPE NPs, indicating the co-assembly of helper lipid DOPE, might not significantly affect the intracellular localization features of the cationic lipids.