Finite element analysis of stresses generated in cortical bone during implantation of a novel Limb Prosthesis Osseointegrated Fixation System

New technologies applied to canine limb prostheses: A review

Although only a few studies have investigated about the development of animal prosthesis, currently, there is an increasing interest in canine limb prosthesis design and its clinical application since they offer an alternative to killing the animal in extreme situations where amputating the limb is the only option. Restoring normal function of amputated canine limbs with the use of a prosthesis is challenging. However, recent advances in surgical procedures and prosthesis design technology appear promising in developing devices that closely recreate normal canine limb function. Surgical advances such as evolution of osseointegration (bone-anchored) prostheses present great promise. Likewise, modern computer-aided design and manufacturing technology, as well as novel motion analysis systems are now providing improved prosthesis designs. Advances in patient-customized prostheses have the potential to reduce the risk of implant failure. The objective of this investigation is to present a general review of the existing literature on modern surgical approaches, design and manufacturing methods, as well as biomechanical analyses so that veterinarians can make more and better-informed decisions on the development and selection of proper canine limb prosthesis. Isolated research efforts have made possible an improvement in stability, comfort, and performance of canine limb prosthesis. However, continued multidisciplinary research collaboration and teamwork among veterinarians, engineers, designers, and industry, with supporting scientific evidence, is required to better understand the development of canine limb prosthesis designs that closely replicate the normal limb function.

A Preliminary Cost-Utility Analysis of the Prosthetic Care Innovations: Case of the Keep Walking Implant

Several obstacles must be overcome before preliminary cost-utility analyses (CUA) of prosthetic care innovations can be routinely performed. The basic framework of preliminary CUAs and hands- on recommendations suggested previously might contribute to wider adoption. However, a practical application for an emerging intervention is needed to showcase the capacity of this proposed preliminary CUA framework. This study presented the outcomes of preliminary CUA of the distal weight bearing Keep Walking Implant (KWI), an emerging prosthetic care innovation that may reduce socket fittings for individuals with transfemoral amputation. The preliminary CUAs compared the provision of prosthetic care without (usual intervention) and with the KWI (new intervention) using a 15-step iterative process focused on feasibility, constructs, analysis, and interpretations of outcomes from an Australia government prosthetic care perspective over a six-year time horizon. Baseline and incremental costs were extracted from schedules of allowable expenses. Baseline utilities were extracted from a study and converted into quality-adjusted life-year (QALY). Incremental utilities were calculated based on sensible gains of QALY from baselines. The provision of the prosthetic care with the KWI could generate an indicative incremental cost-utility ratio (ICUR) of -$36,890 per QALY, which was $76,890 per QALY below willingness-to-pay threshold, provided that the KWI reduces costs by $17,910 while increasing utility by 0.485 QALY compared to usual interventions. This preliminary CUA provided administrators of healthcare organizations in Australia and elsewhere with prerequisite evidence justifying further access to market and clinical introduction of the KWI. Altogether, this work suggests that the basic framework of the preliminary CUA of a prosthetic care innovation proposed previously is feasible and informative when a series of assumptions are carefully considered. This study further confirms that preliminary CUAs prosthetic care interventions might be a relevant alternative to full CUA for other medical treatments.

Influence of the Surface Roughness of PEEK GRF30 and Ti6Al4V SLM on the Viability of Primary Human Osteoblasts Determined by the MTT Test

The aim of the study was to clearly determine whether selected modern medical materials and three dimensional printing allow for satisfactory viability of human osteoblasts, which is important from the point of view of the subsequent osseointegration process. Moreover, as implants are produced with various topography, the influence of surface roughness on viability of bone cells was evaluated. To conduct the research, primary human osteoblasts (PromoCell) were used. Cells were seeded on samples of glass-reinforced polyetheretherketone (30% of the filling), Ti6Al4V manufactured with the use of selective laser melting technology and forged Ti6Al4V with appropriately prepared variable surface roughness. To assess the viability of the tested cells the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide was used. Results showed that all evaluated materials do not exhibit cytotoxic properties. Moreover, on their basis it can be concluded that there is a certain surface topography (designated i.a. as roughness equal to approx. Ra = 0.30 μm), which ensures the highest possible viability of human osteoblasts. On the basis of the received data, it can also be concluded that modern glass-reinforced polyetheretherketone or Ti6Al4V produced by rapid prototyping method allow to manufacture implants that should be effectively used in clinical conditions.

The Influence of Geometry of Implants for Direct Skeletal Attachment of Limb Prosthesis on Rehabilitation Program and Stress-Shielding Intensity

The purpose of the research was to evaluate the influence of selected parameters of the implants for bone anchored prostheses on possibility of conducting static load bearing exercises and stress-shielding intensity. A press-fit implant, a threaded implant, and the proposed design were compared using the finite element method. For the analyses two features were examined: diameter (19.0 – 21.0 mm) and length (75.0 – 130.0 mm). To define the possibility of conducting rehabilitation exercises the micromotion of implants while axial loading with a force up to 1000 N was examined to evaluate the changes at implant-bone interface. The stress-shielding intensity was estimated by bone mass loss over 60 months. The results suggest that, in terms of micromotion generated during rehabilitation exercises, the threaded (max. micromotion of 16.00 μm) and the proposed (max. micromotion of 45.43 μm) implants ensure low and appropriate micromotion. In the case of the press-fit solution the load values should be selected with care, as there is a risk of losing primary stabilisation. The allowed forces (that do not stimulate the organism to generate fibrous tissue) were approx. 140 N in the case of the length of 75 mm, increasing up to 560 N, while using the length of 130 mm. Moreover, obtained stress-shielding intensities suggest that the proposed implant should provide appropriate secondary stability, similar to the threaded solution, due to the low bone mass loss during long-term use (improving at the same time more bone remodelling in distal Gruen zones, by providing lower bone mass loss by approx. 13% to 20% in dependency of the length and diameter used). On this basis it can be concluded that the proposed design can be an appropriate alternative to commercially used implants.

A comparative analysis of internal bone remodelling concepts in a novel implant for direct skeletal attachment of limb prosthesis evaluation: A finite element analysis

Nowadays, numerous internal bone remodelling concepts are under development, in order to estimate long-term functionality of implants by evaluating the intensity of stress-shielding effect. This effect is also analysed for the implants for direct skeletal attachment, considered as a better exoprosthesis fixation method than prosthetic sockets. Most of bone remodelling approaches are based on basic concepts, differing with certain assumptions, which may affect the accuracy of the results. This article compares commonly used internal bone remodelling concepts and evaluates the functionality of the proposed Limb Prosthesis Osseointegrated Fixation System for direct skeletal attachment of limb prosthesis in comparison with two currently available implants: the Intraosseous Transcutaneous Amputation Prosthesis and the Osseointegrated Prostheses for the Rehabilitation of Amputees. Three concepts were chosen: without and with lazy zone and with the use of quadratic formula which considers bone overloading. Therefore, three finite element models were created with identical femur implanted with each of analysed implants. The implants were loaded with loads that refer to two stages of gait cycle (heel strike and toe-off). The analysed concepts have given similar results, allowing to assume that each of them can be successfully used to estimate internal bone remodelling around analysed implants for direct skeletal attachment of limb prosthesis. The results also present higher functionality of the proposed implant for direct skeletal attachment of limb prosthesis due to a significant reduction in stress-shielding in the analysed areas around implant in comparison with the Intraosseous Transcutaneous Amputation Prosthesis and the Osseointegrated Prostheses for the Rehabilitation of Amputees. It suggests that the proposed design is a better alternative to the currently used solutions.