Constructing HIV-1 integrase tetramer and exploring influences of metal ions on forming integrase–DNA complex

Discovery of New Ligand with Quinoline Scaffold as Potent Allosteric Inhibitor of HIV-1 and Its Copper Complexes as a Powerful Catalyst for the Synthesis of Chiral Benzimidazole Derivatives, and in Silico Anti-HIV-1 Studies

In this paper, the novel Schiff base ligand containing quinoline moiety and its novel copper chelate complexes were successfully prepared. The catalytic activity of the final complex in the organic reaction such as synthesis of chiral benzimidazoles and anti-HIV-1 activity of Schiff base ligand and the products of this reaction were investigated. In addition, green chemistry reactions using microwaves, powerful catalyst synthesis, green recovery and reusability, and separation of products with economic, safe, and clean methods (green chemistry) are among the advantages of this protocol. The potency of these compounds as anti-HIV-1 agents was investigated using molecular docking into integrase (IN) enzyme with code 1QS4 and the GROMACS software for molecular dynamics simulation. The final steps were evaluated in case of RMSD, RMSF, and Rg. The results revealed that the compound VII exhibit a good binding affinity to integrase (Δg = -10.99 kcal/mol) during 100 ns simulation time, and the analysis of RMSD suggested that compound VII was stable in the binding site of integrase.

Design, Synthesis and Docking Studies of Thioimidazolyl Diketoacid Derivatives Targeting HIV-1 Integrase

BACKGROUND

Integrase enzyme is a validated drug target to discover novel structures as anti-HIV-1 agents.

OBJECTIVE

Novel series of thioimidazolyl diketo acid derivatives characterizing various substituents at N-1 and 2-thio positions of central ring were developed as HIV-1 integrase inhibitors.

RESULTS

The obtained molecules were evaluated in the enzyme assay, displaying promising integrase inhibitory activity with IC50 values ranging from 0.9 to 7.7 M. The synthesized compounds were also tested for antiviral activity and cytotoxicity using HeLa cells infected by the single-cycle replicable HIV-1 NL4-3.

CONCLUSION

The most potent compound was 18i with EC50=19 µM, IC50 0.9 µM and SI= 10.5. Docking studies indicated that the binding mode of the active molecule is well aligned with the known HIV-1 integrase inhibitors.

Piroxicam Analogs: Design, Synthesis, Docking Study and Biological Evaluation as Promising Anti-HIV-1 agents

BACKGROUND

Taking the well-known drug, Piroxicam as a lead compound, we designed and synthesized two series of 1,2-benzothiazines 1,1-dioxide derivatives to assay their ability in inhibition of HIV-1 replication in cell culture.

OBJECTIVE

In this study, we describe the synthesis, docking study and biological evaluation of 1,2-benzothiazines 1,1- dioxide derivatives.

RESULTS

Most of the new compounds were active in the cell-based anti-HIV-1 assay with EC50 < 50 M. Among them, compounds 7g was found to be the most active molecule. Docking study using 3OYA pdb code on the most active molecule 7g with EC50 values of 10 M showed a similar binding mode to the HIV integrase inhibitors.

CONCLUSION

Since all the compounds showed no remarkable cytotoxicity (CC50> 500 M), the designed scaffold is promising structure for development of new anti-HIV-1 agents.

C-Terminal Domain of Integrase Binds between the Two Active Sites

HIV integrase (HIV-IN), one of three HIV enzymes, is a target for the treatment of AIDS, but the full biological assembly has been difficult to characterize, hampering inhibitor design. The recent crystallographic structures of integrase from prototype foamy virus (PFV-IN) with bound DNA were a breakthrough, revealing how viral DNA organizes two integrase dimers into a tetramer that has the two active sites appropriately spaced for insertion of the viral DNA into host DNA. The organization of domains within each PFV-IN protein chain, however, varies significantly from that found in HIV-IN structures. With the goal of identifying shared structural characteristics, the interactions among components of the PFV-IN and HIV-IN assemblies were investigated with the macromolecular docking program DOT. DOT performs an exhaustive, rigid-body search between two macromolecules. Computational docking reproduced the crystallographic interactions of the PFV-IN catalytic and N-terminal domains with viral DNA and found similar viral DNA interactions for HIV-IN. Computational docking did not reproduce the crystallographic interactions of the PFV-IN C-terminal domain (CTD). Instead, two symmetry-related positions were found for the PFV-IN CTD that indicate formation of a CTD dimer between the two active sites. Our predicted CTD dimer is consistent with cross-linking studies showing interactions of the CTD with viral DNA that appear to be blocked in the PFV-IN structures. The CTD dimer can insert two arginine-rich loops between the two bound vDNA molecules and the host DNA, a region that is unoccupied in the PFV-IN crystallographic structures. The positive potential from these two loops would alleviate the large negative potential created by the close proximity of two viral vDNA ends, helping to bring together the two active sites and assisting host DNA binding. This study demonstrates the ability of computational docking to evaluate complex crystallographic assemblies, identify interactions that are influenced by the crystal environment, and provide plausible alternatives.

Computational design of a full-length model of HIV-1 integrase: modeling of new inhibitors and comparison of their calculated binding energies with those previously studied

A full-length model of integrase (IN) of the human immunodeficiency virus type 1 (HIV-1) was constructed based on the distinctly resolved X-ray crystal structures of its three domains, named N-terminal, catalytic core and C-terminal. Thirty-one already known inhibitors with varieties of structural differences as well as nine newly tested ones were docked into the catalytic core. The molecular dynamic (MD) and binding properties of these complexes were obtained by MD calculations. The binding energies calculated by molecular mechanic/Poisson Boltzmann solvation area were significantly correlationed with available IC50. Four inhibitors including two newly designed were also docked into the full-length model and their MD behaviors and binding properties were calculated. It was found that one of the newly designed compounds forms a better complex with HIV-1 IN compared to the rest including raltegravir. MD calculations were performed with AMBER suite of programs using ff99SB force field for the proteins and the general Amber force field for the ligands. In conclusion, the results have produced a promising standpoint not only in the construction of the full-length model but also in development of new drugs against it. However, the role of multimer formation and the involvement of DNAs, and their subsequent effect on the complexation and inhibition, are required to arrive at a conclusive decision.

Molecular dynamics of HIV1-integrase in complex with 93del - a structural perspective on the mechanism of inhibition

HIV1 integrase is an important target for the antiviral therapy. Guanine-rich quadruplex, such as 93del, have been shown to be potent inhibitors of this enzyme and thus representing a new class of antiviral agents. Although X-ray and NMR structures of HIV1 integrase and 93del have been reported, there is no structural information of the complex and the mechanism of inhibition still remains unexplored. A number of computational methods including automated protein-DNA docking and molecular dynamics simulation in explicit solvent were used to model the binding of 93del to HIV1 integrase. Analysis of the dynamic behaviour of the complex using principal components analysis and elastic network modelling techniques allow us to understand how the binding of 93del aptamer and its interactions with key residues affect the intrinsic motions of the catalytic loops by stabilising them in catalytically inactive conformations. Such insights into the structural mechanism of inhibition can aid in improving the design of anti-HIV aptamers.

Computer tools in the discovery of HIV-1 integrase inhibitors

Computer-aided drug design (CADD) methodologies have made great advances and contributed significantly to the discovery and/or optimization of many clinically used drugs in recent years. CADD tools have likewise been applied to the discovery of inhibitors of HIV-1 integrase, a difficult and worthwhile target for the development of efficient anti-HIV drugs. This article reviews the application of CADD tools, including pharmacophore search, quantitative structure-activity relationships, model building of integrase complexed with viral DNA and quantum-chemical studies in the discovery of HIV-1 integrase inhibitors. Different structurally diverse integrase inhibitors have been identified by, or with significant help from, various CADD tools.

Structural properties of HIV integrase. Lens epithelium-derived growth factor oligomers

Integrase (IN) is the catalytic component of the preintegration complex, a large nucleoprotein assembly critical for the integration of the retroviral genome into a host chromosome. Although partial crystal structures of human immunodeficiency virus IN alone and its complex with the integrase binding domain of the host factor PSIP1/lens epithelium-derived growth factor (LEDGF)/p75 are available, many questions remain regarding the properties and structures of LEDGF-bound IN oligomers. Using analytical ultracentrifugation, multiangle light scattering, and small angle x-ray scattering, we have established the oligomeric state, stoichiometry, and molecular shapes of IN.LEDGF complexes in solution. Analyses of intact IN tetramers bound to two different LEDGF truncations allow for placement of the integrase binding domain by difference analysis. Modeling of the small angle x-ray scattering envelopes using existing structural data suggests domain arrangements in the IN oligomers that support and extend existing biochemical data for IN.LEDGF complexes and lend new insights into the quaternary structure of LEDGF-bound IN tetramers. These IN oligomers may be involved in stages of the viral life cycle other than integration, including assembly, budding, and early replication.

Therapeutic strategies underpinning the development of novel techniques for the treatment of HIV infection

The HIV replication cycle offers multiple targets for chemotherapeutic intervention, including the viral exterior envelope glycoprotein, gp120; viral co-receptors CXCR4 and CCR5; transmembrane glycoprotein, gp41; integrase; reverse transcriptase; protease and so on. Most currently used anti-HIV drugs are reverse transcriptase inhibitors or protease inhibitors. The expanding application of simulation to drug design combined with experimental techniques have developed a large amount of novel inhibitors that interact specifically with targets besides transcriptase and protease. This review presents details of the anti-HIV inhibitors discovered with computer-aided approaches and provides an overview of the recent five-year achievements in the treatment of HIV infection and the application of computational methods to current drug design.

A dynamic model of HIV integrase inhibition and drug resistance

Human immunodeficiency virus type 1 (HIV-1) integrase is one of three virally encoded enzymes essential for replication and, therefore, a rational choice as a drug target for the treatment of HIV-1-infected individuals. In 2007, raltegravir became the first integrase inhibitor approved for use in the treatment of HIV-infected patients, more than a decade since the approval of the first protease inhibitor (saquinavir, Hoffman La-Roche, 1995) and two decades since the approval of the first reverse transcriptase inhibitor (retrovir, GlaxoSmithKline, 1987). The slow progress toward a clinically effective HIV-1 integrase inhibitor can at least in part be attributed to a poor structural understanding of this key viral protein. Here we describe the development of a restrained molecular dynamics protocol that produces a more accurate model of the active site of this drug target. This model provides an advance on previously described models as it ensures that the catalytic DDE motif makes correct, monodentate interactions with the two active-site magnesium ions. Dynamic restraints applied to this coordination state create models with the correct solvation sphere for the metal ion complex and highlight the coordination sites available for metal-binding ligands. Application of appropriate dynamic flexibility to the core domain allowed the inclusion of multiple conformational states in subsequent docking studies. These models have allowed us to (1) explore the effects of key drug resistance mutations on the dynamic flexibility and conformational preferences of HIV integrase and to (2) study raltegravir binding in the context of these dynamic models of both wild type and the G140S/Q148H drug-resistant enzyme.

Complexes of HIV-1 integrase with HAT proteins: multiscale models, dynamics, and hypotheses on allosteric sites of inhibition

A new and very promising strategy for HIV drug discovery consists in blocking the multiple functional interactions between HIV-1 integrase (IN) and its cellular cofactors. At present, this line of action is hindered by the absence of three-dimensional structures of IN in complex with any of them. In this article, we developed a full-length three-dimensional structure of IN, including the highly flexible terminal residues 270-288, which are not experimentally solved. Additionally, we built models of IN complexed to the human acetyltransferases GCN5 and p300 based on available structural and mutagenesis data. Then, we studied the dynamical behavior of these models by means of the Coarse-Grained Molecular Dynamics (CGMD) and Essential Dynamics (ED) to locate and characterize the nature of the largest collective motions. We found correlated motions involving distant regions of IN. Moreover, we found that these are influenced by the binding with the acetyltransferases (HATs). Taken together these findings suggest a way to affect the acetyltransferase binding by an allosteric type of inhibition and provide an important new approach for the drug design against HIV disease.

The terminal (catalytic) adenosine of the HIV LTR controls the kinetics of binding and dissociation of HIV integrase strand transfer inhibitors

Specific HIV integrase strand transfer inhibitors are thought to bind to the integrase active site, positioned to coordinate with two catalytic magnesium atoms in a pocket flanked by the end of the viral LTR. A structural role for the 3' terminus of the viral LTR in the inhibitor-bound state has not previously been examined. This study describes the kinetics of binding of a specific strand transfer inhibitor to integrase variants assembled with systematic changes to the terminal 3' adenosine. Kinetic experiments are consistent with a two-step binding model in which there are different functions for the terminal adenine base and the terminal deoxyribose sugar. Adenine seems to act as a "shield" which retards the rate of inhibitor association with the integrase active site, possibly by acting as an internal competitive inhibitor. The terminal deoxyribose is responsible for retarding the rate of inhibitor dissociation, either by sterically blocking inhibitor egress or by a direct interaction with the bound inhibitor. These findings further our understanding of the details of the inhibitor binding site of specific strand transfer inhibitors.

Biochemical analysis of HIV-1 integrase variants resistant to strand transfer inhibitors

In this study, eight different HIV-1 integrase proteins containing mutations observed in strand transfer inhibitor-resistant viruses were expressed, purified, and used for detailed enzymatic analyses. All the variants examined were impaired for strand transfer activity compared with the wild type enzyme, with relative catalytic efficiencies (k(p)/K(m)) ranging from 0.6 to 50% of wild type. The origin of the reduced strand transfer efficiencies of the variant enzymes was predominantly because of poorer catalytic turnover (k(p)) values. However, smaller second-order effects were caused by up to 4-fold increases in K(m) values for target DNA utilization in some of the variants. All the variants were less efficient than the wild type enzyme in assembling on the viral long terminal repeat, as each variant required more protein than wild type to attain maximal activity. In addition, the variant integrases displayed up to 8-fold reductions in their catalytic efficiencies for 3'-processing. The Q148R variant was the most defective enzyme. The molecular basis for resistance of these enzymes was shown to be due to lower affinity binding of the strand transfer inhibitor to the integrase complex, a consequence of faster dissociation rates. In the case of the Q148R variant, the origin of reduced compound affinity lies in alterations to the active site that reduce the binding of a catalytically essential magnesium ion. Finally, except for T66I, variant viruses harboring the resistance-inducing substitutions were defective for viral integration.

Virtual screening application of a model of full-length HIV-1 integrase complexed with viral DNA

To address the absence of experimental data on the full-length structure of HIV-1 integrase and the way it binds to viral and human DNA, we had previously [Karki, R. G.; Tang, Y.; Burke, T. R., Jr.; Nicklaus, M. C. J. Comput. Aided Mol. Des.2004, 18, 739] constructed models of full-length HIV-1 integrase complexed with models of viral and human DNA. Here we describe the discovery of novel HIV-1 integrase strand transfer inhibitors based on one of these models. Virtual screening methods including docking and filtering by predicted ADME/Tox properties yielded several microM level inhibitors of the strand transfer reaction catalyzed by wild-type HIV-1 integrase.

Mechanisms and inhibition of HIV integration

HIV integrase is required for viral replication and a rationale target for antiretroviral therapies. Integrase inhibitors are potentially complementary to current treatments. This review focuses on the mechanisms of HIV integration. The roles of viral and cellular co-factors during pre-integration complex (PIC) formation and integration are reviewed. The biochemical mechanisms of integration, integrase structures and approaches to inhibit integration are described.