Continuous generation of fructose from Taraxacum officinale tap root extract and inulin by immobilized inulinase in a packed-bed reactor

Glutaraldehyde functionalization of halloysite nanoclay enhances immobilization efficacy of endoinulinase for fructooligosaccharides production from inulin

Current work describes the enhancement of immobilization efficacy of Aspergillus tritici endoinulinase onto halloysite nanoclay using crosslinker glutaraldehyde. Under statistical optimized immobilization conditions, viz. glutaraldehyde 1.50% (v/v), enzyme coupling-time 2.20 h, glutaraldehyde activation-time 1.00 h and endoinulinase load 50 IU, maximum activity yield (65.77%) and immobilization yield (82.45%) was obtained. An enhancement of 1.15- and 1.23-fold in both enzyme activity yield and immobilization yield of endoinulinase was observed, when compared with APTES-functionalized halloysite nanoclay immobilized endoinulinase. Immobilized biocatalyst showed maximum activity at pH 5.0 and temperature 60 °C with broad pH (4.0-8.5) and temperature (50-75 °C) stability. Further, optimal hydrolytic conditions (inulin concentration 8.0%; endoinulinase load 80 IU; agitation 125 rpm and hydrolysis-time 13 h) supported fructooligosaccharides yield (95.44%) in a batch system. HPTLC studies blueprint confirmed 95.44% fructooligosaccharides containing 35.41% kestose, 26.19% nystose and 9.69% fructofuranosylnystose. The developed immobilized biocatalyst shown good stability of 8 cycles for inulin hydrolysis.

Effect of the Addition of Dried Dandelion Roots (Taraxacum officinale F. H. Wigg.) on Wheat Dough and Bread Properties

Dried and crushed dandelion roots (Taraxacum officinale F. H. Wigg.) (TO) were used as a formulation additive (at the amount of 0, 1, 3, 4, 5, and 6 g 100 g⁻¹ flour) to wheat bread. The farinographic properties of the dough and the physical and chemical properties of the bread were evaluated. It was found that the addition of dried flour caused a significant decrease in water absorption by the flour (1% and higher TO level), an increase in the development time (from 2% to 5% TO addition) and dough stability (3% and 4% TO level), and an increase in dough softening (4% and higher TO level). As the substitution of TO for wheat flour increased, there was a gradual decrease in loaf volume, an increase in specific weight and crumb hardness, and a darkening of the crumb color. The total polyphenol content increased linearly with the percentage increase of dried root additions TO from 0.290 to 0.394 mg GAE g⁻¹ d.m_., which translated into an increase in the antioxidant activity of the bread. It was found that dried crushed roots of Taraxacum officinale can be a recipe additive for wheat bread; however, due to their specific smell and bitter aftertaste, the level of this additive should not exceed 3 g 100 g⁻¹ flour.

Optimization of Inulin Hydrolysis by Penicillium lanosocoeruleum Inulinases and Efficient Conversion Into Polyhydroxyalkanoates

Inulin, a polydisperse fructan found as a common storage polysaccharide in the roots of several plants, represents a renewable non-food biomass resource for the synthesis of bio-based products. Exploitation of inulin-containing feedstocks requires the integration of different processes, including inulinase production, saccharification of inulin, and microbial fermentation for the conversion of released sugars into added-value products. In this work paper, a new microbial source of inulinase, Penicillium lanosocoeruleum, was identified through the screening of a fungal library. Inulinase production using inulin as C-source was optimized, reaching up to 28 U mL^-1 at the 4th day of growth. The fungal inulinase mixture (PlaI) was characterized for pH and temperature stability and activity profile, and its isoenzymes composition was investigated by proteomic strategies. Statistical optimization of inulin hydrolysis was performed using a central composite rotatable design (CCRD), by analyzing the effect of four factors. In the optimized conditions (T, 45.5°C; pH, 5.1; substrate concentration, 60 g L^-1; enzyme loading, 50 U g_substrate ^-1), up to 96% inulin is converted in fructose within 20 h. The integration of PlaI in a process for polyhydroxyalkanoate (PHA) production by Cupriavidus necator from inulin was tested in both separated hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF). A maximum of 3.2 g L^-1 of PHB accumulation, corresponding to 82% polymer content, was achieved in the SSF. The proved efficiency in inulin hydrolysis and its effective integration into a SSF process pave the way to a profitable exploitation of the PlaI enzymatic mixture in inulin-based biorefineries.

Biotechnological applications of inulin-rich feedstocks

Inulin is a naturally occurring second largest storage polysaccharide with a wide range of applications in pharmaceutical and food industries. It is a robust polysaccharide which consists of a linear chain of β-2, 1-linked-d-fructofuranose molecules terminated with α-d-glucose moiety at the reducing end. It is present in tubers, bulbs and tuberous roots of more than 36,000 plants belonging to both monocotyledonous and dicotyledonous families. Jerusalem artichoke, chicory, dahlia, asparagus, etc. are important inulin-rich plants. Inulin is a potent substrate and inducer for the production of inulinases. Inulin/inulin-rich feedstocks can be used for the production of fructooligosaccharides and high-fructose syrup. Additionally, inulin-rich feedstocks can also be exploited for the production of other industrially important products like acetone, butanol, bioethanol, single cell proteins, single cell oils, 2, 3-butanediol, sorbitol, mannitol, etc. Current review highlights the biotechnological potential of inulin-rich feedstocks for the production of various industrially important products.

Fructose production from inulin using fungal inulinase immobilized on 3-aminopropyl-triethoxysilane functionalized multiwalled carbon nanotubes

The main objective of the present work was to modify multiwalled carbon nanotubes (MWCNTs) using 3-aminopropyl-triethoxysilane (APTES) to generate amino-terminated surfaces for inulinase immobilization, which can be further used for fructose production. CCRD of response surface methodology was used for optimization of inulinase immobilization on MWCNTs. At optimized parameters (APTES concentration 4%; sonication time 4 h; enzyme coupling time 1.5 h and enzyme load 15 IU), maximal inulinase activity and immobilization yield was 60.7% and 74.4%, respectively. Immobilized inulinase showed same pH optima of free enzyme, while an elevation in temperature optima to 60 °C was observed after its immobilization. Immobilized inulinase also shown enhancement in pH stability and thermostability. Overall, 4.54-fold rise in half-life of inulinase was detected after immobilization at 60 °C. K_m and V_max of inulinase decreased after immobilization. Immobilized inulinase preserved 28% of its residual activity after 10 consecutive batch cycles of inulin hydrolysis for the production of fructose.

Biocatalytic strategies for the production of high fructose syrup from inulin

The consumption of natural and low calorie sugars has increased enormously from the past few decades. To fulfil the demands, the production of healthy sweeteners as an alternative to sucrose has recently received considerable interest. Fructose is the most health beneficial and safest sugar amongst them. It is generally recognised as safe (GRAS) and has become an important food ingredient due its sweetening and various health promising functional properties. Commercially, high fructose syrup is prepared from starch by multienzymatic process. Single-step enzymatic hydrolysis of inulin using inulinase has emerged as an alternate to the conventional approach to reduce complexity, time and cost. The present review, outlines the enzymatic strategies used for the preparation of high fructose syrup from inulin/inulin-rich plant materials in batch and continuous systems, and its conclusions.