Bio-inspired synthesis of flower shaped iron oxide nanoparticles (FeONPs) using phytochemicals of Solanum lycopersicum leaf extract for biomedical applications

Inorganic nanoparticles: An effective antibiofilm strategy

Biofilm is a common problem associated with human health. Pathogenicity and increase in resistance of bacteria require urgent development of effective ways for the treatment of bacterial diseases. Different strategies have been developed for the treatment of bacterial infections among which nanoparticles have shown greater prospects in battling with infections. Biofilms are resistant microbial colonies that possess resistance and, hence, cannot be killed by conventional drugs. Nanoparticles offer new avenues for treating biofilm-related infections involving multi-drug resistant organisms. They possess great antibiofilm properties, disrupting cell architecture and preventing colony formation. Green-synthesised nanoparticles are more effective and less toxic to human cells than commercially available or chemically synthesised antibiofilm nanoparticles. This review summarises the antibiofilm efficiency of plant-mediated nanoparticles and knowledge about biofilm inhibition.

Green synthesis of chitosan/silver nanocomposite using kaempferol for triple negative breast cancer therapy and antibacterial activity

The synthesis of polymer-encapsulated metal nanoparticles is a growing field of area due to their long-term uses in the development of new technologies. The present study describes the synthesis of chitosan/silver nanocomposite using kaempferol for anticancer and bactericidal activity. The formation of Kf-CS/Ag nanocomposite was confirmed by the development of a brown color and UV-absorbance around 438 nm. The IR study was utilized to determine the existence of Kf and CS in the synthesized nanocomposite. TEM analysis demonstrated that the synthesized nanocomposite have a predominantly uniform spherical shape and size ranges 7-10 nm. EDX spectrum showed the existence of Ag, C, and N elements in the nanocomposite material. Further, Kf-CS/Ag nanocomposite exhibited potential in vitro inhibitory property against triple-negative breast cancer (TNBC) cells and their IC50 values was found to be 53 μg/mL. Moreover, fluorescent assays such as DAPI and AO/EtBr confirmed the apoptosis induction ability of Kf-CS/Ag nanocomposite in MDA-MB-231 cells. The synthesized Kf-CS/Ag nanocomposite showed significant and dose-depended antibacterial property against S. aureus and P. aeruginosa. Thus, the obtained findings demonstrated that the synthesized nanocomposite can be potentially used to improve human health as biocidal nanocomposite in biomedical sectors.

Iron oxide nanoparticle-based nanocomposites in biomedical application

Iron-oxide-based biomagnetic nanocomposites, recognized for their significant properties, have been utilized in MRI and cancer treatment for several decades. The expansion of clinical applications is limited by the occurrence of adverse effects. These limitations are largely attributed to suboptimal material design, resulting in agglomeration, reduced magnetic relaxivity, and inadequate functionality. To address these challenges, various synthesis methods and modification strategies have been used to tailor the size, shape, and properties of iron oxide nanoparticle (FeONP)-based nanocomposites. The resulting modified nanocomposites exhibit significant potential for application in diagnostic, therapeutic, and theranostic contexts, including MRI, drug delivery, and anticancer and antimicrobial activity. Yet, their biosafety profile must be rigorously evaluated. Such efforts will facilitate the broader clinical translation of FeONP-based nanocomposites in biomedical applications.

Phytosynthesized Iron Oxide Nanoparticles Using Aqueous Extract of Saccharum arundinaceum (Hardy Sugar Cane), Their Characterizations, Antiglycation, and Cytotoxic Activities

The goal of the current study is to achieve plant-mediated synthesis of iron oxide nanoparticles (Fe2O3 NPs). The plant extract of Saccharum arundinaceum was used as a reducing and stabilizing agent for the synthesis of Fe2O3 NPs. Different techniques such as energy-dispersive X-ray analysis (EDX), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), and UV-visible spectroscopy (UV-vis) were used to characterize the synthesis of Fe2O3 NPs. UV-visible spectroscopy verified the synthesis of Fe2O3 NPs using a surface plasmon resonance peak at a wavelength of 370 nm. SEM analysis specifies the spherical morphology of the synthesized nanoparticles with a size range between 30 and 70 nm. The reducing and capping materials of Fe2O3 NPs were revealed by FT-IR analysis based on functional group identification. The plant extract contained essential functional groups, such as C-H, C-O, N-H, -CH2, and -OH, that facilitate the green synthesis of Fe2O3 NPs. The EDX analysis detected the atomic percentage with the elemental composition of Fe2O3 NPs, while the XRD pattern demonstrated the crystallinity of Fe2O3 NPs. Furthermore, the synthesized Fe2O3 NPs showed potential antiglycation activity under in vitro conditions, which was confirmed by the efficient zone of inhibition on glycation of bovine serum albumin/glucose (BSA-glucose) in the order <100 < 500 < 1000 μg/mL, which revealed that Fe2O3 NPs showed significant antiglycation activity. Additionally, the cytotoxic activity against brain glioblastoma cells was assessed using the MTT assay, which exhibited diminished cytotoxic activity at concentrations lower than 300 μg/mL. Thus, we assumed that the resulting Fe2O3 NPs are a good option for use in drug delivery and cancer treatments.

Facile Synthesis and Characterization of Chitosan Functionalized Silver Nanoparticles for Antibacterial and Anti-Lung Cancer Applications

In the treatment of bacterial contamination, the problem of multi-drug resistance is becoming an increasingly pressing concern. Nanotechnology advancements enable the preparation of metal nanoparticles that can be assembled into complex systems to control bacterial and tumor cell growth. The current work investigates the green production of chitosan functionalized silver nanoparticles (CS/Ag NPs) using Sida acuta and their inhibition efficacy against bacterial pathogens and lung cancer cells (A549). Initially, a brown color formation confirmed the synthesis, and the chemical nature of the synthesized NPs were examined by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). FTIR demonstrated the occurrence of CS and S. acuta functional groups in the synthesized CS/Ag NPs. The electron microscopy study exhibited CS/Ag NPs with a spherical morphology and size ranges of 6-45 nm, while XRD analysis demonstrated the crystallinity of Ag NPs. Further, the bacterial inhibition property of CS/Ag NPs was examined against K. pneumoniae and S. aureus, which showed clear inhibition zones at different concentrations. In addition, the antibacterial properties were further confirmed by a fluorescent AO/EtBr staining technique. Furthermore, prepared CS/Ag NPs exhibited a potential anti-cancer character against a human lung cancer cell line (A549). In conclusion, our findings revealed that the produced CS/Ag NPs could be used as an excellent inhibitory material in industrial and clinical sectors.

Preparation of gallotannin loaded chitosan/zinc oxide nanocomposite for photocatalytic degradation of organic dye and antibacterial applications

Chitosan functionalization is a growing field of interest to enhance the unique characteristics of metal oxide nanoparticles. In this study, a facile synthesis method has been used to develop a gallotannin loaded chitosan/zinc oxide (CS/ZnO) nanocomposite. Initially, white color formation confirmed the formation, and physico-chemical natures of the prepared nanocomposite were examined using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). Crystalline of CS amorphous phase and ZnO patterns were demonstrated by XRD. FTIR revealed the presence of CS and gallotannin bio-active groups in the formed nanocomposite. Electron microscopy study exhibited that the produced nanocomposite had an agglomerated sheets like morphology with an average size of 50-130 nm. Further, the produced nanocomposite was assayed for methylene blue (MB) degradation activity from aqueous solution. After 30 min of irradiation, the efficiency of nanocomposite degradation was found to be 96.64 %. Moreover, prepared nanocomposite showed a potential and concentration-dependent antibacterial activity against S. aureus. In conclusion, our findings revealed that prepared nanocomposite can be used as an excellent photocatalyst as well as a bactericidal agent in industrial and clinical sectors.

Metal-based nanomaterials and nanocomposites as promising frontier in cancer chemotherapy

Cancer is a disease associated with complex pathology and one of the most prevalent and leading reasons for mortality in the world. Current chemotherapy has challenges with cytotoxicity, selectivity, multidrug resistance, and the formation of stemlike cells. Nanomaterials (NMs) have unique properties that make them useful for various diagnostic and therapeutic purposes in cancer research. NMs can be engineered to target cancer cells for early detection and can deliver drugs directly to cancer cells, reducing side effects and improving treatment efficacy. Several of NMs can also be used for photothermal therapy to destroy cancer cells or enhance immune response to cancer by delivering immune-stimulating molecules to immune cells or modulating the tumor microenvironment. NMs are being modified to overcome issues, such as toxicity, lack of selectivity, increase drug capacity, and bioavailability, for a wide spectrum of cancer therapies. To improve targeted drug delivery using nano-carriers, noteworthy research is required. Several metal-based NMs have been studied with the expectation of finding a cure for cancer treatment. In this review, the current development and the potential of plant and metal-based NMs with their effects on size and shape have been discussed along with their more effective usage in cancer diagnosis and treatment.

Removing emerging e-waste pollutant DTFPB by synchronized oxidation-adsorption Fenton technology

Liquid crystal monomers (LCMs), an emerging group of organic pollutants related to electronic waste, have been frequently detected from various environmental matrices, including landfill leachate. The persistence of LCMs requires robust technology for remediation. The objectives of this study were to evaluate the feasibility, performance and mechanism of the remediation of a typical LCM 4-[difluoro(3,4,5-trifluorophenoxy)methyl]- 3,5-difluoro-4'-propylbiphenyl (DTFPB) via synchronized oxidation-adsorption (SOA) Fenton technology and verify its application in DTFPB-contaminated leachate. The SOA Fenton system could effectively degrade 93.5% of DTFPB and 5.6% of its total organic carbon (TOC_DTFPB) by hydroxyl radical oxidation (molar ratio of Fe²⁺ to H₂O₂ of 1/4 and pH 2.5-3.0) following a pseudo-first-order model under 0.378 h^-1. Additionally, synchronized adsorption of DTFPB and its degradation intermediates by in situ resultant ferric particles via hydrophobic interaction, complexation, and coprecipitation contributed to almost 100% of DTFPB and 33.4% of TOC_DTFPB removal. Three possible degradation pathways involving eight products were proposed, and hydrophobic interactions might drive the adsorption process. It was first confirmed that the SOA Fenton system exhibited good performance in eliminating DTFPB and byproducts from landfill leachate. This study provides new insights into the potential of the Fenton process for the treatment of emerging LCMs contamination in wastewater.

Sunlight-driven antibacterial activity of a novel zinc oxide quantum dot and its optimization using Box-Behnken design-A medicament for communicable disease protective wearables

The current study focuses on microwave-assisted zinc oxide quantum dots synthesis (ZnO-QDs) from zinc oxide bionanocomposite (ZnO-BC) preparation. The novelty lies in the preparation of ZnO-QDs, since the natural elements present in ZnO-BC itself acted as a surface penetration enhancer without using any chemical agent. Under ultraviolet (UV) light ZnO-QDs emitted a blue glow, confirming the fluorescence property. Using Box-Behnken design, the experimental factors of ZnO-QDs were optimized, yielding a positive response of 350 nm absorbance and these results also matched with the UV-visible spectroscopy characterization studies of ZnO-QDs. Using Escherichia coli, the antibacterial activity of ZnO-BC in comparison to ZnO-QDs was determined using the well diffusion method and an inhibition zone ranging from 11 to 23 mm and in the broth assay the OD values were reduced by almost seven and 10 times for ZnO-BC and ZnO-QDs, respectively, when compared to the control (untreated). The antibacterial activity demonstrated that our newly prepared BC and its QDs have superior activity when compared to the standard antibiotics such as ampicillin. This type of nanomaterial can be used as a new bioactive natural material with light-assisted activity for antibacterial coatings in the manufacture of personal protective equipment.

Targeting Apoptotic Pathway of Cancer Cells with Phytochemicals and Plant-Based Nanomaterials

Apoptosis is the elimination of functionally non-essential, neoplastic, and infected cells via the mitochondrial pathway or death receptor pathway. The process of apoptosis is highly regulated through membrane channels and apoptogenic proteins. Apoptosis maintains cellular balance within the human body through cell cycle progression. Loss of apoptosis control prolongs cancer cell survival and allows the accumulation of mutations that can promote angiogenesis, promote cell proliferation, disrupt differentiation, and increase invasiveness during tumor progression. The apoptotic pathway has been extensively studied as a potential drug target in cancer treatment. However, the off-target activities of drugs and negative implications have been a matter of concern over the years. Phytochemicals (PCs) have been studied for their efficacy in various cancer cell lines individually and synergistically. The development of nanoparticles (NPs) through green synthesis has added a new dimension to the advancement of plant-based nanomaterials for effective cancer treatment. This review provides a detailed insight into the fundamental molecular pathways of programmed cell death and highlights the role of PCs along with the existing drugs and plant-based NPs in treating cancer by targeting its programmed cell death (PCD) network.

Biogenic Preparation, Characterization, and Biomedical Applications of Chitosan Functionalized Iron Oxide Nanocomposite

Chitosan (CS) functionalization over nanomaterials has gained more attention in the biomedical field due to their biocompatibility, biodegradability, and enhanced properties. In the present study, CS functionalized iron (II) oxide nanocomposite (CS/FeO NC) was prepared using Sida acuta leaf extract by a facile and eco-friendly green chemistry route. Phyto-compounds of S. acuta leaf were used as a reductant to prepare CS/FeO NC. The existence of CS and FeO crystalline peaks in CS/FeO NC was confirmed by XRD. FE-SEM analysis revealed that the prepared CS/FeO NC were spherical with a 10–100 nm average size. FTIR analyzed the existence of CS and metal-oxygen bands in the prepared NC. The CS/FeO NC showed the potential bactericidal activity against E. coli, B. subtilis, and S. aureus pathogens. Further, CS/FeO NC also exhibited the dose-dependent anti-proliferative property against human lung cancer cells (A549). Thus, the obtained outcomes revealed that the prepared CS/FeO NC could be a promising candidate in the biomedical sector to inhibit the growth of bacterial pathogens and lung cancer cells.

Formation, antimicrobial activity, and biomedical performance of plant-based nanoparticles: a review

Because many engineered nanoparticles are toxic, there is a need for methods to fabricate safe nanoparticles such as plant-based nanoparticles. Indeed, plant extracts contain flavonoids, amino acids, proteins, polysaccharides, enzymes, polyphenols, steroids, and reducing sugars that facilitate the reduction, formation, and stabilization of nanoparticles. Moreover, synthesizing nanoparticles from plant extracts is fast, safe, and cost-effective because it does not consume much energy, and non-toxic derivatives are generated. These nanoparticles have diverse and unique properties of interest for applications in many fields. Here, we review the synthesis of metal/metal oxide nanoparticles with plant extracts. These nanoparticles display antibacterial, antifungal, anticancer, and antioxidant properties. Plant-based nanoparticles are also useful for medical diagnosis and drug delivery.

Comparison of characteristics and biocompatibility of green synthesized iron oxide nanoparticles with chemical synthesized nanoparticles

Iron oxide nanoparticles synthesis is an expanding area of research due of their magnetic properties and possible applications in several novel technologies. FeONPs are indispensable in the biomedical field for diagnosis, treatments and drug delivery and in bioremediation applications. The synthesis route of nanoparticles is a major concern because biological methods are eco-friendly, and chemical methods are considered toxic. The objective of this study is to synthesize FeONPs by two different methods and to compare their properties and efficiency in applications. FeONPs were synthesized and characterized by microscopic and various spectroscopic techniques. The synthesized FeONPs were screened for their cytotoxic activity on PBMCs using MTT assay and found to exhibit good biocompatibility. Moreover, the GS FeONPs exhibited potential antibacterial activities and meanwhile showed less toxicity in brine shrimp lethality assay. Hence, these nanoparticles are biocompatible, environmentally safe and can be utilized in many medical applications.

Current Insight into the Therapeutic Potential of Phytocompounds and their Nanoparticle-based Systems for Effective Management of Lung Cancer

Lung cancer is the second most common cancer and the primary cause of cancer-related death in both men and women worldwide. Due to diagnosis at an advanced stage, it is associated with high mortality in the majority of patients. At present, various treatment approaches are available such as chemotherapy, surgery, and radiotherapy. However, all these approaches usually cause serious side effects like degeneration of normal cells, bone marrow depression, alopecia, extensive vomiting, etc. To overcome the aforementioned problems, researchers have focused on the alternative therapeutic approach in which various natural compounds are reported, which possessed anti-lung cancer activity. Phytocompounds exhibit their anti-lung cancer activity via targeting various cell-signaling pathways, apoptosis, cell cycle arrest, and regulating antioxidant status and detoxification. Apart from the excellent anti-cancer activity, clinical administration of phytocompounds is confined because of their high lipophilicity and low bioavailability. Therefore, researchers show their concern in the development of a stable, safe, and effective approach of treatment with minimal side effects by the development of nanoparticle-based delivery of these phytocompounds to the target site. Targeted delivery of phytocompound through nanoparticles overcomes the aforementioned problems. In this article, the molecular mechanism of phytocompounds, their emerging combination therapy, and their nanoparticles-based delivery systems in the treatment of lung cancer have been discussed.

Green Synthesis of Flower-Shaped Copper Oxide and Nickel Oxide Nanoparticles via Capparis decidua Leaf Extract for Synergic Adsorption-Photocatalytic Degradation of Pesticides

Green manufacturing of catalysts enables sustainable advanced oxidation processes and water treatment processes for removing trace contaminants such as pesticides. An environmentally friendly biosynthesis process produced high-surface-area CuO and NiO nanocatalysts using phytochemicals in the Capparis decidua leaf extract, which served as a reductant and influenced catalyst shape. Capparis decidua is a bushy shrub, widely distributed in dry and arid regions of Africa, Pakistan, India, Egypt, Jordan, Sudan, Saudi Arabia. The synthesized CuO and NiO nanoparticles were characterized by UV-vis spectroscopy (UV-vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) and thermo-gravimetric analysis/differential thermal analysis (TGA/DTA). The produced nanoparticles were spherical and flower-like in shape and have a characteristic face-centered cubic structure of CuO and NiO. Biosynthesized catalysts were photoactive and degraded recalcitrant pesticide Lambda-cyhalothrin (L-CHT). Photocatalytic degradation of L-CHT was affected by the initial L-CHT concentration, solution pH levels between 5 and 9, and photocatalyst concentration. The L-CHT removal percentage attained by CuO photocatalyst (~99%) was higher than for NiO photocatalyst (~89%). The degradation of L-CHT follows a pseudo-first-order kinetic model, and the apparent rate constant (kapp) decreased from 0.033 min−1 for CuO to 0.0084 min−1 for NiO photocatalyst. The novel flower-shaped nanoparticles demonstrated high stability in water and recyclability for removing L-CHT pesticide contamination in water.

Biosynthesis of nano bimetallic Ag/Pt alloy from Crocus sativus L. extract: Biological efficacy and catalytic activity

In this project, silver‑platinum (AgPt) nanoparticles were prepared by using the Crocus sativus L. plant ethanolic extract. The AgPt nanoparticles were characterized by applying the various method as ultraviolet-visible and infrared spectroscopy, electron microscopy, and X-ray diffraction analysis. The morphology structural indicated that the AgPt nanoparticles were spherical particles with diameter about 36.0 nm. The FTIR spectroscopy shows the efficient stabilization of the AgPt nanoparticles by phytoconstituents. The Ag and AgPt nanoparticles have polyphenolic content, lower than the flavonoids and proanthocyanins contents. The AgPt nanoparticles depicted the highest antioxidant properties compared to the Ag nanoparticles and ascorbic acid. The results showed that the AgPt nanoparticles had a high antioxidant properties. In addition, the AgPt nanoparticles demonstrated the substantial antimicrobial and cytotoxic activities against pathogenic microbes and MCF-7 breast cancer cell line. The environmental chemistry analysis depicts that methyl orange can be degraded from water by catalytic degradation process with sodium borohydride. The AgPt nanoparticles were prosperous in catalytic degrading methyl orange following a first order kinetic model.