Response surface methodology as an approach for optimization of α-amylase production by the new isolated thermotolerant Bacillus licheniformis WF67 strain in submerged fermentation

Preparation of microcapsules and evaluation of their biocontrol efficacy

In this study, a combination of Serratia nematophila L2 and Bacillus velezensis W24 was used to biocontrol Sclerotinia sclerotiorum. When the mixed ratio of L2 to W24 was 1:1, the inhibition rate on the growth of S. sclerotiorum was 88.1 %. To gain a large number of bacteria, the culture medium and conditions were optimized. When the medium formula involved molasses (8.890 g/L), soy peptone (6.826 g/L), and NaCl (6.865 g/L), and the culture conditions were 32 °C, inoculum 4%, rotation speed 200 rpm, and pH 7, the maximum amounts of bacterial cells obtained. In order to prepare microcapsules, spray drying conditions were optimized. These conditions included the soluble starch concentration of 30 g/100 mL, the inlet air temperature of 160 °C, and the feed flow rate of 450 mL/h. Under these optimized conditions to prepare microcapsules, the mixed strain (L2 and W24) exhibited a survival rate of 93.9 ± 0.9% and a viable bacterial count of 6.4 × 1012 cfu/g. In addition, microcapsules (GW24Ms) which contained strains L2 and W24 had good storage stability. In the pot experiment, GW24Ms could effectively reduce the disease of soybean plants and the control effect was 88.4%. Thus, the microbial agent represents a promising biocontrol solution for managing Sclerotinia in soybean.

Structure-based modification of a-amylase by conventional and emerging technologies: Comparative study on the secondary structure, activity, thermal stability and amylolysis efficiency

α-Amylase is an endo-enzyme that catalyzes the hydrolysis of starch into shorter oligosaccharides. α-Amylase plays a crucial role in various industries. Manipulated α-amylases are of particular interest due to their remarkable amylolysis efficiency and thermostability for large-scale biotechnological processes. The retained catalytic activity of enzymes is decreased according to extreme pH, temperature, pressure, and chemical reagents. Broad industrial applications of α-amylases need special properties such as stability against temperature, pH, and chelators, and also attain reusability, desirable enzymatic activity, efficiency, and selectivity. Considering the biotechnological importance of α-amylase, its high stability is the most critical challenge for its economic viability. Therefore, improving its functionality and stability recently gained much interest. To achieve this purpose, various emerging technologies in combination with conventional methods on α-Amylases with different sources have been conducted. The present review is an attempt to summarize the effect of various conventional methods and emerging technologies employed to date on α-amylase secondary structure, thermal stability, and performance.

Challenges and prospects of microbial α-amylases for industrial application: a review

α-Amylases are essential biocatalysts representing a billion-dollar market with significant long-term global demand. They have varied applications ranging from detergent, textile, and food sectors such as bakery to, more recently, biofuel industries. Microbial α-amylases have distinct advantages over their plant and animal counterparts owing to generally good activities and better stability at temperature and pH extremes. With the scope of applications expanding, the need for new and improved α-amylases is ever-growing. However, scaling up microbial α-amylase technology from the laboratory to industry for practical applications is impeded by several issues, ranging from mass transfer limitations, low enzyme yields, and energy-intensive product recovery that adds to high production costs. This review highlights the major challenges and prospects for the production of microbial α-amylases, considering the various avenues of industrial bioprocessing such as culture-independent approaches, nutrient optimization, bioreactor operations with design improvements, and product down-streaming approaches towards developing efficient α-amylases with high activity and recyclability. Since the sequence and structure of the enzyme play a crucial role in modulating its functional properties, we have also tried to analyze the structural composition of microbial α-amylase as a guide to its thermodynamic properties to identify the areas that can be targeted for enhancing the catalytic activity and thermostability of the enzyme through varied immobilization or selective enzyme engineering approaches. Also, the utilization of inexpensive and renewable substrates for enzyme production to isolate α-amylases with non-conventional applications has been briefly discussed.

Optimization and purification of bioproducts from Bacillus velezensis PhCL fermentation and their potential on industrial application and bioremediation

Bioproduction is considered a promising alternative way of obtaining useful and green chemicals. However, the downstream process of biomolecules has been one of the major difficulties in upscaling the application of bioproducts due to the high purification cost. Acid precipitation is the most common method for purifying biosurfactants from the fermentation broth with high purity. However, the use of strong acids and organic solvents in solvent extraction has limited its application. Hence, in this study, a new strain of Bacillus velezensis PhCL was isolated from phenolic waste, and its production of amylase had been optimized via response surface methodology. After that, amylase and biosurfactant were purified by sequential ammonium sulfate precipitation and the result suggested that even though the purified crude biosurfactant had a lower purification fold compared to the acid precipitation, the yield was higher and both enzymes and biosurfactant also could be recovered for lowering the purification cost. Moreover, the purified amylase and crude biosurfactant were characterized and the results suggested that the purified crude biosurfactant would have a higher emulsion activity and petroleum hydrocarbon removal rate compared to traditional surfactants. This study provided another approach for purifying bioactive compounds including enzymes and biosurfactants from the same fermentation broth and further explored the potential of the crude purified biosurfactant in the bioremediation of polycyclic aromatic hydrocarbons and petroleum hydrocarbons.

Optimization of amylase production by the biological control agent Bacillus halotolerans RFP74 using response surface methodology

BACKGROUND

Over the years, excessive use of chemical pesticides to control plant pathogens has caused environmental problems. Therefore, biological solutions such as the use of microorganisms with antimicrobial capacity become indispensable. To inhibit the growth of plant pathogens, biological control agents use different mechanisms, including the production of hydrolytic enzymes. In this study, the production of amylase, an enzyme important for the prevention and control of plant diseases, by a biological control agent Bacillus halotolerans RFP74 was optimized using response surface methodology.

RESULTS

Bacillus halotolerans RFP74 inhibited the growth of various phytopathogens including Alternaria and Bipolaris with an inhibition rate of more than 60%. In addition, it also demonstrated an essential production of amylase. Based on previous studies of amylase production in Bacillus, three parameters were considered significant: initial pH of the medium, incubation time, and temperature. Using the central composite design with Design Expert software, the optimized amylase production for B. halotolerans RFP74 is at a temperature of 37 °C, incubation time 51 h and pH 6.

CONCLUSION

The biological control agent B. halotolerans RFP74 inhibited the growth of Alternaria and Bipolaris, demonstrating its broad spectrum of activity. Knowledge of the optimal condition required for the production of hydrolytic enzymes such as amylase provides information on the most effective application of this biological control agent.

Optimizing Conditions in the Acid Tolerance Test for Potential Probiotics Using Response Surface Methodology

Acid tolerance is an important feature of probiotic development. It is one of the factors underlying the beneficial effects of probiotics in the intestine. However, the methods used by different researchers to test acid tolerance vary, causing confusion in the interpretation of the results. Therefore, in this study, we determine the optimal conditions for the acid tolerance test using response surface methodology. The factors of pH (2.5 to 3.5), exposure time (1 to 2 h), and pepsin (presence or absence) were used as independent variables, and the survival rates of seven strains (Lacticaseibacillus casei KACC 12413, Lactiplantibacillus plantarum KACC 15357, Limosilactobacillus fermentum KACC 11441, Lactiplantibacillus plantarum WCFS1, Lacticaseibacillus rhamnosus GG, Lactiplantibacillus plantarum KCTC 21024, and Lactiplantibacillus plantarum WiKim 0112) known to have probiotic properties were used as dependent variables. The results of the analysis of variance (ANOVA) indicated that the pH value and exposure time in acidic environments significantly affected the acid tolerance test model, and their interaction also had an effect (P < 0.05). Using the ANOVA results, the condition of the acid tolerance test was optimized with a target of an 85% survival rate for each strain. The optimized conditions of the acid tolerance test were as follows: pH 2.92, exposure time of 1.73 h, and presence of pepsin and pH 3, exposure time of 1.98 h, and absence of pepsin. These results can optimize strain selection with rigorous acid tolerance without confusion by unifying the conditions for the acid tolerance test. IMPORTANCE The acid tolerance test, which is the first step in selecting probiotics, is not standardized and can often cause confusion in the interpretation of results. Thus, in the present study, we optimized the conditions for the acid tolerance test using response surface methodology. These optimized conditions can be used to screen for strains with acid tolerance.