Electrochemical characterisation of the human cytochrome P450 CYP2C9

Electrochemical transformations catalyzed by cytochrome P450s and peroxidases

Cytochrome P450s (Cyt P450s) and peroxidases are enzymes featuring iron heme cofactors that have wide applicability as biocatalysts in chemical syntheses. Cyt P450s are a family of monooxygenases that oxidize fatty acids, steroids, and xenobiotics, synthesize hormones, and convert drugs and other chemicals to metabolites. Peroxidases are involved in breaking down hydrogen peroxide and can oxidize organic compounds during this process. Both heme-containing enzymes utilize active Fe^IVO intermediates to oxidize reactants. By incorporating these enzymes in stable thin films on electrodes, Cyt P450s and peroxidases can accept electrons from an electrode, albeit by different mechanisms, and catalyze organic transformations in a feasible and cost-effective way. This is an advantageous approach, often called bioelectrocatalysis, compared to their biological pathways in solution that require expensive biochemical reductants such as NADPH or additional enzymes to recycle NADPH for Cyt P450s. Bioelectrocatalysis also serves as an ex situ platform to investigate metabolism of drugs and bio-relevant chemicals. In this paper we review biocatalytic electrochemical reactions using Cyt P450s including C-H activation, S-oxidation, epoxidation, N-hydroxylation, and oxidative N-, and O-dealkylation; as well as reactions catalyzed by peroxidases including synthetically important oxidations of organic compounds. Design aspects of these bioelectrocatalytic reactions are presented and discussed, including enzyme film formation on electrodes, temperature, pH, solvents, and activation of the enzymes. Finally, we discuss challenges and future perspective of these two important bioelectrocatalytic systems.

Human Cytochrome P450 2C9 and Its Polymorphic Modifications: Electroanalysis, Catalytic Properties, and Approaches to the Regulation of Enzymatic Activity

The electrochemical properties of cytochrome P450 2C9 (CYP2C9) and polymorphic modifications P450 2C9*2 (CYP2C9*2) and P450 2C9*3 (CYP2C9*3) were studied. To analyze the comparative electrochemical and electrocatalytic activity, the enzymes were immobilized on electrodes modified with a membrane-like synthetic surfactant (didodecyldimethylammonium bromide (DDAB)). An adequate choice of the type of modified electrode was confirmed by cyclic voltammetry of cytochromes P450 under anaerobic conditions, demonstrating well-defined peaks of reduction and oxidation of the heme iron. The midpoint potential, Emid, of cytochrome P450 2C9 is −0.318 ± 0.01 V, and Emid = −0.324 ± 0.01 V, and Emid = −0.318 ± 0.03 V for allelic variant 2C9*2 and allelic variant 2C9*3, respectively. In the presence of substrate diclofenac under aerobic conditions, cytochrome P450 2C9 and its polymorphic modifications P450 2C9*2 and P450 2C9*3 exhibit catalytic properties. Stimulation of the metabolism of diclofenac by cytochrome P450 2C9 in the presence of antioxidant medications mexidol and taurine was shown.

Engineered human CYP2C9 and its main polymorphic variants for bioelectrochemical measurements of catalytic response

Polymorphism is an important aspect in drug metabolism responsible for different individual response to drug dosage, often leading to adverse drug reactions. Here human CYP2C9 as well as its polymorphic variants CYP2C9*2 and CYP2C9*3 present in approximately 35% of the Caucasian population have been engineered by linking their gene to the one of D. vulgaris flavodoxin (FLD) that acts as regulator of the electron flow from the electrode surface to the haem. The redox properties of the immobilised proteins were investigated by cyclic voltammetry and electrocatalysis was measured in presence of the largely used anticoagulant drug S-warfarin, marker substrate for CYP2C9. Immobilisation of the CYP2C9-FLD, CYP2C9*2-FLD and CYP2C9*3-FLD on DDAB modified glassy carbon electrodes showed well defined redox couples on the oxygen-free cyclic voltammograms and mid-point potentials of all enzymes were calculated. Electrocatalysis in presence of substrate and quantification of the product formed showed lower catalytic activities for the CYP2C9*3-FLD (2.73 ± 1.07 min^-1) and CYP2C9*2-FLD (12.42 ± 2.17 min^-1) compared to the wild type CYP2C9-FLD (18.23 ± 1.29 min^-1). These differences in activity among the CYP2C9 variants are in line with the reported literature data, and this set the basis for the use of the bio-electrode for the measurement of the different catalytic responses towards drugs very relevant in therapy.

A spectroelectrochemical investigation of the heme-based sensor DevS from Mycobacterium tuberculosis: a redox versus oxygen sensor

Tuberculosis is one of the oldest known infectious diseases, responsible for millions of deaths annually around the world. The ability of Mycobacterium tuberculosis (Mtb) to enter into a dormant state has been considered integral to the success of this bacterium as a human pathogen. One of the key systems involved in regulating the entrance into dormancy is the differentially expressed in virulent strain sensor protein (DevS) [(dormancy survival sensor protein (DosS)]. However, the physiological signal for DevS has remained unclear since it was first shown to be a heme-based sensor with conflicting reports on whether it is a redox or an oxygen sensor. To address this question and provide a better understanding of the electronic properties of this protein, we present here, for the first time, a series of spectroelectrochemistry measurements of the full-length holo DevS in anaerobic conditions as well as bound to CO, NO, imidazole (Imz), cyanide, and O₂ . An interesting feature of this protein is its ability to bind Imz even in the ferrous state, implying small-molecule analogues could be designed as potential regulators. Nonetheless, a midpoint potential (E_m ) value of +10 mV [vs normal hydrogen electrode (NHE)] for DevS as measured under anaerobic conditions is much higher than the expected cytosolic potential for Mtb or even within stimulated macrophages (~ -270 mV vs NHE), indicating this sensor works in a reduced ferrous state. These data, along with the high oxygen affinity and very slow auto-oxidation rate of DevS, provides evidence that it is not a redox sensor. Overall, this study validates the biological function of DevS as an oxygen sensor directly involved in the dormancy/latency of Mtb.

Nanoscale electron transport measurements of immobilized cytochrome P450 proteins

Gold nanopillars, functionalized with an organic self-assembled monolayer, can be used to measure the electrical conductance properties of immobilized proteins without aggregation. Measurements of the conductance of nanopillars with cytochrome P450 2C9 (CYP2C9) proteins using conducting probe atomic force microscopy demonstrate that a correlation exists between the energy barrier height between hopping sites and CYP2C9 metabolic activity. Measurements performed as a function of tip force indicate that, when subjected to a large force, the protein is more stable in the presence of a substrate. This agrees with the hypothesis that substrate entry into the active site helps to stabilize the enzyme. The relative distance between hopping sites also increases with increasing force, possibly because protein functional groups responsible for electron transport (ETp) depend on the structure of the protein. The inhibitor sulfaphenazole, in addition to the previously studied aniline, increased the barrier height for electron transfer and thereby makes CYP2C9 reduction more difficult and inhibits metabolism. This suggests that P450 Type II binders may decrease the ease of ETp processes in the enzyme, in addition to occupying the active site.

Electrocatalytic cycle of P450 cytochromes: the protective and stimulating roles of antioxidants

This study reports the investigation of the catalytic activity of isolated cytochromes from the cytochrome P450 superfamily. Electrochemically driven CYP reactions may have practical relevance, providing a useful tool for drug assay studies.

In vitro and in vivo assessment of CYP2C9-mediated herb-herb interaction of Euphorbiae Pekinensis Radix and Glycyrrhizae Radix

According to traditional Chinese medicine theories, Euphorbiae Pekinensis Radix and Glycyrrhizae Radix should not be used together in one prescription, because their interaction leads to an unexpected consequence. However, the mechanism remains unclear. The purpose of this study was to find out whether CYP2C9 was involved in this herb–herb interaction by using tolbutamide as a probe substrate in vivo and in vitro. Both Euphorbiae Pekinensis Radix and Glycyrrhizae Radix showed induction activity toward CYP2C9, while the combination of them showed a more potent induction activity toward CYP2C9 in vivo. In vitro study revealed only the combination of the herbs could induce the activity of CYP2C9. Thus, both in vivo and in vitro study indicated combination of Glycyrrhizae Radix and Euphorbiae Pekinensis Radix could induce the activity of CYP2C9 to a high level, which may result in decreased plasma levels of major active ingredients of these two herbs, as well as other herbs in the prescriptions. Further research also appears to be necessary to identify the main enzymes involved in the metabolism of the active ingredients in Glycyrrhizae Radix and Euphorbiae Pekinensis Radix.

In SilicoInvestigation of Cytochrome P450 2C9 in relation to Aging Using Traditional Chinese Medicine

Cytochrome P450 2C9 (CYP2C9) metabolizes dehydroepiandrosterone-sulfate (DHEA-S), but in elderly people the amount of DHEA-S remaining after CYP2C9 metabolization may be insufficient for optimal health. A prediction model, molecular docking, and molecular dynamics were used to screen the Traditional Chinese Medicine (TCM) database to determine molecular compounds that may inhibit CYP2C9. The candidate compounds apocynoside(I), 4-methoxymagndialdehyde, and prunasin have higher Dock Scores, and prediction bioactivity than warfarin (the control drug). The interaction between 4-methoxymagndialdehyde and CYP2C9 is more intense than with other TCM compounds, but the simulation is longer. In these compounds, apocynoside(I) and prunasin have a greater number of pathways for their flexible structure, but these structures create weak interactions. These candidate compounds, which are known to have antioxidation and hypolipidemic functions that have an indirect effect on the aging process, can be extracted from traditional Chinese medicines. Thus, these candidate compounds may become CYP2C9 inhibitors and play an important role in providing optimal health in the elderly.

Continuous monitoring of Naproxen by a cytochrome P450-based electrochemical sensor

This paper reports the characterization of an electrochemical biosensor for the continuous monitoring of Naproxen based on cytochrome P450. The electrochemical biosensor is based on the drop-casting of multi-walled carbon-nanotubes (MWCNTs) and microsomal cytochrome P4501A2 (msCYP1A2) on a graphite screen-printed electrode (SPE). The proposed biosensor was employed to monitor Naproxen (NAP), a well-known anti-inflammatory compound, through cyclic voltammetry. The dynamic linear range for the amperometric detection of NAP had an upper limit of 300 µM with a corresponding limit of detection (LOD) of 16 ± 1 µM (S/N=3), which is included in NAP physiological range (9-300 µM). The MWCNT/msCYP1A2-SPE sensor was also calibrated for NAP detection in mouse serum that was previously extracted from mice, showing a slightly higher LOD (33 ± 18 µM). The stability of the msCYP1A2-based biosensor was assessed by longtime continuous cyclic voltammetric measurements. The ability of the sensor to monitor drug delivery was investigated by using a commercial micro-osmotic pump. Results show that the MWCNT/msCYP1A2-SPE sensor is capable of precisely monitoring the real-time delivery of NAP for 16 h. This work proves that the proposed electrochemical sensor might represent an innovative point-of-care solution for the personalization of drug therapies, as well as for pharmacokinetic studies in both animals and humans.

Measurement of electron transfer through cytochrome P450 protein on nanopillars and the effect of bound substrates

Electron transfer in cytochrome P450 enzymes is a fundamental process for activity. It is difficult to measure electron transfer in these enzymes because under the conditions typically used they exist in a variety of states. Using nanotechnology-based techniques, gold conducting nanopillars were constructed in an indexed array. The P450 enzyme CYP2C9 was attached to each of these nanopillars, and conductivity measurements made using conducting probe atomic force microscopy under constant force conditions. The conductivity measurements were made on CYP2C9 alone and with bound substrates, a bound substrate-effector pair, and a bound inhibitor. Fitting of the data with the Poole-Frenkel model indicates a correlation between the barrier height for electron transfer and the ease of CYP2C9-mediated metabolism of the bound substrates, though the spin state of iron is not well correlated. The approach described here should have broad application to the measurement of electron transfer in P450 enzymes and other metalloenzymes.

Fully integrated biochip platforms for advanced healthcare

Recent advances in microelectronics and biosensors are enabling developments of innovative biochips for advanced healthcare by providing fully integrated platforms for continuous monitoring of a large set of human disease biomarkers. Continuous monitoring of several human metabolites can be addressed by using fully integrated and minimally invasive devices located in the sub-cutis, typically in the peritoneal region. This extends the techniques of continuous monitoring of glucose currently being pursued with diabetic patients. However, several issues have to be considered in order to succeed in developing fully integrated and minimally invasive implantable devices. These innovative devices require a high-degree of integration, minimal invasive surgery, long-term biocompatibility, security and privacy in data transmission, high reliability, high reproducibility, high specificity, low detection limit and high sensitivity. Recent advances in the field have already proposed possible solutions for several of these issues. The aim of the present paper is to present a broad spectrum of recent results and to propose future directions of development in order to obtain fully implantable systems for the continuous monitoring of the human metabolism in advanced healthcare applications.

Engineering Macaca fascicularis cytochrome P450 2C20 to reduce animal testing for new drugs

In order to develop in vitro methods as an alternative to P450 animal testing in the drug discovery process, two main requisites are necessary: 1) gathering of data on animal homologues of the human P450 enzymes, currently very limited, and 2) bypassing the requirement for both the P450 reductase and the expensive cofactor NADPH. In this work, P450 2C20 from Macaca fascicularis, homologue of the human P450 2C8 has been taken as a model system to develop such an alternative in vitro method by two different approaches. In the first approach called "molecular Lego", a soluble self-sufficient chimera was generated by fusing the P450 2C20 domain with the reductase domain of cytochrome P450 BM3 from Bacillus megaterium (P450 2C20/BMR). In the second approach, the need for the redox partner and also NADPH were both obviated by the direct immobilization of the P450 2C20 on glassy carbon and gold electrodes. Both systems were then compared to those obtained from the reconstituted P450 2C20 monooxygenase in presence of the human P450 reductase and NADPH using paclitaxel and amodiaquine, two typical drug substrates of the human P450 2C8. The K(M) values calculated for the 2C20 and 2C20/BMR in solution and for 2C20 immobilized on electrodes modified with gold nanoparticles were 1.9 ± 0.2, 5.9 ± 2.3, 3.0 ± 0.5 μM for paclitaxel and 1.2 ± 0.2, 1.6±0.2 and 1.4 ± 0.2 μM for amodiaquine, respectively. The data obtained not only show that the engineering of M. fascicularis did not affect its catalytic properties but also are consistent with K(M) values measured for the microsomal human P450 2C8 and therefore show the feasibility of developing alternative in vitro animal tests.

Electrochemical detection of anti-breast-cancer agents in human serum by cytochrome P450-coated carbon nanotubes

We report on the electrochemical detection of anti-cancer drugs in human serum with sensitivity values in the range of 8–925 nA/μM. Multi-walled carbon nanotubes were functionalized with three different cytochrome P450 isoforms (CYP1A2, CYP2B6, and CYP3A4). A model used to effectively describe the cytochrome P450 deposition onto carbon nanotubes was confirmed by Monte Carlo simulations. Voltammetric measurements were performed in phosphate buffer saline (PBS) as well as in human serum, giving well-defined current responses upon addition of increasing concentrations of anti-cancer drugs. The results assert the capability to measure concentration of drugs in the pharmacological ranges in human serum. Another important result is the possibility to detect pairs of drugs present in the same sample, which is highly required in case of therapies with high side-effects risk and in anti-cancer pharmacological treatments based on mixtures of different drugs. Our technology holds potentials for inexpensive multi-panel drug-monitoring in personalized therapy.

The kinetic mechanism for cytochrome P450 metabolism of type II binding compounds: evidence supporting direct reduction

The metabolic stability of a drug is an important property that should be optimized during drug design and development. Nitrogen incorporation is hypothesized to increase the stability by coordination of nitrogen to the heme iron of cytochrome P450, a binding mode that is referred to as type II binding. However, we noticed that the type II binding compound 1 has less metabolic stability at sub-saturating conditions than a closely related type I binding compound 3. Three kinetic models will be presented for type II binder metabolism; (1) Dead-end type II binding, (2) a rapid equilibrium between type I and II binding modes before reduction, and (3) a direct reduction of the type II coordinated heme. Data will be presented on reduction rates of iron, the off rates of substrate (using surface plasmon resonance) and the catalytic rate constants. These data argue against the dead-end, and rapid equilibrium models, leaving the direct reduction kinetic mechanism for metabolism of the type II binding compound 1.

Nano-bio-technology and sensing chips: new systems for detection in personalized therapies and cell biology

Further advances in molecular medicine and cell biology also require new electrochemical systems to detect disease biomarkers and therapeutic compounds. Microelectronic technology offers powerful circuits and systems to develop innovative and miniaturized biochips for sensing at the molecular level. However, microelectronic biochips proposed in the literature often do not show the right specificity, sensitivity, and reliability required by biomedical applications. Nanotechnology offers new materials and solutions to improve the surface properties of sensing probes. The aim of the present paper is to review the most recent progress in Nano-Bio-Technology in the area of the development of new electrochemical systems for molecular detection in personalized therapy and cell culture monitoring.

Control of electrochemical and ferryloxy formation kinetics of cyt P450s in polyion films by heme iron spin state and secondary structure

Voltammetry of cytochrome P450 (cyt P450) enzymes in ultrathin films with polyions was related for the first time to electronic and secondary structure. Heterogeneous electron transfer (hET) rate constants for reduction of the cyt P450s depended on heme iron spin state, with low spin cyt P450cam giving a value 40-fold larger than high spin human cyt P450 1A2, with mixed spin human P450 cyt 2E1 at an intermediate value. Asymmetric reduction-oxidation peak separations with increasing scan rates were explained by simulations featuring faster oxidation than reduction. Results are consistent with a square scheme in which oxidized and reduced forms of cyt P450s each participate in rapid conformational equilibria. Rate constants for oxidation of ferric cyt P450s in films by t-butyl hydroperoxide to active ferryloxy cyt P450s from rotating disk voltammetry suggested a weaker dependence on spin state, but in the reverse order of the observed hET reduction rates. Oxidation and reduction rates of cyt P450s in the films are also likely to depend on protein secondary structure around the heme iron.

Electrocatalytic drug metabolism by CYP2C9 bonded to a self-assembled monolayer-modified electrode

Cytochrome P450 (P450) enzymes typically require the presence of at least cytochrome P450 reductase (CPR) and NADPH to carry out the metabolism of xenobiotics. To address whether the need for redox transfer proteins and the NADPH cofactor protein could be obviated, CYP2C9 was bonded to a gold electrode through an 11-mercaptoundecanoic acid and octanethiol self-assembled monolayer (SAM) through which a current could be applied. Cyclic voltammetry demonstrated direct electrochemistry of the CYP2C9 enzyme bonded to the electrode and fast electron transfer between the heme iron and the gold electrode. To determine whether this system could metabolize warfarin analogous to microsomal or expressed enzyme systems containing CYP2C9, warfarin was incubated with the CYP2C9-SAM-gold electrode and a controlled potential was applied. The expected 7-hydroxywarfarin metabolite was observed, analogous to expressed CYP2C9 systems, wherein this is the predominant metabolite. Current-concentration data generated with increasing concentrations of warfarin were used to determine the Michaelis-Menten constant (K(m)) for the hydroxylation of warfarin (3 microM), which is in good agreement with previous literature regarding K(m) values for this reaction. In summary, the CYP2C9-SAM-gold electrode system was able to carry out the metabolism of warfarin only after application of an electrical potential, but in the absence of either CPR or NADPH. Furthermore, this system may provide a unique platform for both studying P450 enzyme electrochemistry and as a bioreactor to produce metabolites without the need for expensive redox transfer proteins and cofactors.

Protein electrodes with direct electrochemical communication

Electrochemistry using direct electron transfer between an electrode and a protein or an enzyme has developed into a means for studying biological redox reactions and for bioanalytics, biosynthesis and bioenergetics. This review summarizes recent work on direct protein electrochemistry with special emphasis on our results in bioelectrocatalysis using isolated enzymes and enzyme-protein couples.

Preparation, characterization, and substrate metabolism of gold-immobilized cytochrome P450 2C9

The cytochrome P450 enzymes represent an important class of heme-containing enzymes. There is considerable interest in immobilizing these enzymes on a surface so that interactions between a single enzyme and other species can be studied with respect to electron transfer, homodimer or heterodimer interactions, or for construction of biological-based chips for standardizing cytochrome P450 metabolism or for high-throughput screening of pharmaceutical agents. Previous studies have generally immobilized P450 enzymes in a matrix or on a surface. Here, we have attached CYP2C9 to gold substrates such that the resulting construct maintains the ability to bind and metabolize substrates in the presence of NADPH and cytochrome P450 reductase. The activity of these chips is directly dependent upon the linkers used to attach CYP2C9 and to the presence of key molecules in the active site during enzyme attachment. A novel method to detect substrate-enzyme binding, namely, superconducting quantum interference device (SQUID) magnetometry, was used to monitor the binding of substrates. Most significantly, conditions that allow measurable CYP2C9 metabolism to occur have been developed.

Electrochemical reduction of sterol-14α-demethylase from Mycobacterium tuberculosis (CYP51b1)

The electrochemical reduction of the heme protein sterol-14alpha-demethylase from Mycobacterium tuberculosis (CYP51b1, or further CYP51) was investigated. Direct electron transfer was demonstrated between CYP51 and graphite screen-printed electrodes modified with gold nanoparticles and with the membrane-like synthetic surfactant didodecyl dimethylammonium bromide. The formal potential of the Fe3+/Fe2+ pair, E(1/2), is equal to -273 mV (vs. Ag/AgCl). The cathodic current corresponding to the reduction of oxygen by immobilized heme protein was registered in the presence of oxygen. Addition of lanosterol, one of the substrates of the CYP51 family, to the oxygenated solution caused a concentration-dependent increase in the reduction current in voltammetric and amperometric experiments. Ketoconazole, an inhibitor of CYP51, inhibited the catalytic cathodic current in the presence of lanosterol. Electrochemical reduction of CYP51 may serve as an adequate alternative to the reconstituted system, which requires additional redox partners for the exhibition of catalytic activity of heme proteins of the cytochrome P450 superfamily.

Electrochemical properties of cytochroms P450 using nanostructured electrodes: Direct electron transfer and electro catalysis

The present study demonstrates direct electron transfer between cytochromes P450 2B4 (CYP2B4), P450 1A2 (CYP1A2), sterol 14alpha-demethylase (CYP51b1) on the one hand and screen-printed graphite electrodes, modified with gold nanoparticles and didodecyldimethylammonium bromide (DDAB) on the other. Electro detection of heme proteins was possible when 2-200 pmol P450/electrode were adsorbed on the surface of nanostructured electrochemical interfaces. Electron transfer, direct electrochemical reduction and interaction with P450 substrates (oxygen, benzphetamine, and lanosterol) and with P450 inhibitor (ketoconazole) were analyzed using cyclic voltammetry (CV), square wave voltammetry (SWV) differential pulse voltammetry (DPV), and amperometry.

Genetic variation at the CYP2C locus and its association with torsemide biotransformation

In 97 unselected volunteers and two additional homozygous carriers of CYP2C9(*)3, we investigated the oral clearance of torsemide in relation to 37 polymorphisms at the CYP2C gene locus. Torsemide total oral clearance was linearly associated with the number of CYP2C9(*)3 alleles (geometric mean: 59, 40 and 20 ml/min in carriers of no, one and two alleles) and so were the methyl- and ring-hydroxylation but not the carboxylation clearance. Haplotypes including the CYP2C9(*)3 allele were similarly associated with the clearances but no other variant and no haplotype not including the CYP2C9(*)3 variant. The extended haplotype length (EHL) of the CYP2C9 haplotypes was positively associated with higher activity of the gene product. Torsemide total oral clearance was predictable with r(2)=82.1% using plasma concentrations at 0.5, 1, 2 and 24 h. In conclusion, torsemide's biotransformation strongly depended on the CYP2C9(*)3 variant but no other. Higher clearance CYP2C9 haplotypes appear to be evolutionarily selected.

A new format of electrodes for the electrochemical reduction of cytochromes P450

New approach to the electrochemical reduction of cytochromes P450 (P450s, CYPs) at electrodes chemically modified with appropriate substrates for P450s ("reverse" electrodes) was proposed. The method is based on the analysis of cyclic voltammograms, square-wave voltammograms and amperograms with subsequent determination of electrochemical characteristics such as catalytic current and redox potential. The sensitivity of proposed method is 0.2-1 nmol P450/electrode. The changes of maximal current and of redox potentials in square-wave voltammograms as well as the changes of catalytic current in amperometric experiments proved to be informative and reliable. Planar regime of screen-printed electrodes (strip-type sensors) enabled to utilise 20-60 microl of electrolyte volume. The enzyme-substrate pairs P450 2B4/benzphetamine and P450scc/cholesterol were investigated. Electrochemical parameters of electrodes with unspecific P450 substrates differed considerably from electrodes with appropriate substrates.

Recent progress in cytochrome P450 enzyme electrochemistry

Cytochrome P450 (CYP) enzymes perform crucial functions in humans, including the metabolism of drugs and hormone synthesis. The catalytic reactions performed by these enzymes (typically monoxygenation) require the transfer of electrons. Thermodynamic and mechanistic detail of the electron transfer component of these catalytic processes has been obtained traditionally from potentiometric titrations. More recently, voltammetric approaches (that are inherently simpler and require less sample) have been used. This has been made possible by the creation of biocompatible electrode surfaces at which the P450 enzyme is confined and able to undergo physiologically relevant electron transfer processes. The continuing challenge has been to obtain an in vivo-like enzyme response, and to provide the basis for the creation of an artificial bioprocess in vitro. A powerful instrumental electrochemical method, employing Fourier-transformed large-amplitude ac voltammetry, offers the potential for greater insight and new opportunities to understand the nuances of the electron transfer process. This review highlights several recent advances in the electrochemistry of P450 enzymes rather than providing a comprehensive review of P450 electrochemistry.

Improving catalytic properties of P450 BM3 haem domain electrodes by molecular Lego

In this work the catalytic properties of a cytochrome P450 immobilised onto an electrode surface are improved by means of the molecular Lego approach.