Bilirubin and tryptophan adsorption in albumin-containing solutions

Reusable Zwitterionic Porous Organic Polymers for Bilirubin Removal in Serum

Herein, we report a straightforward strategy to construct reusable, hemocompatible, and highly efficient bilirubin adsorbents by installing zwitterionic modules into a porous organic polymer (POP) for hemoperfusion application. Three types of zwitterions with different amounts are used to evaluate their impacts on the characteristics of POPs, including carboxybetaine methacrylate (CB), sulfobetaine methacrylate (SB), and 2-methacryloyloxyethyl phosphorylcholine (MPC). Results show that zwitterions can improve hemocompatibility, hydrophilicity, and bilirubin uptake of the POP. Among all zwitterionic POPs, POP-CB-40% exhibits the best bilirubin uptake, ∼46.5 times enhancement compared with the non-zwitterionic POP in 100% serum. This enhancement can be attributed to the improved hydrophilicity and protein resistance ability in biological solutions. More importantly, the reusability test shows that POP-CB-40% maintains ∼99% of bilirubin uptake capacity at fifth recycling in 100% serum. Findings in this work provide a guideline for the design of biocompatible and efficient POP-based bilirubin adsorbents for hemoperfusion therapy.

Modeling and Validation of an Ultra-Compact Regenerative Liver Dialysis Device

The availability of a wearable artificial liver that facilitates extracorporeal dialysis outside of medical facilities would represent a significant advancement for patients requiring dialysis. The objective of this preliminary investigation is to explore, using validated mathematical models based on in vitro data, the feasibility of developing a novel, cost-effective, and highly compact extracorporeal liver support device that can be employed as a transitional therapy to transplantation outside of clinical settings. Such an innovation would offer substantial cost savings to the national healthcare system while significantly improving the patient's quality of life. The experimental components consisted of replacing traditional adsorbent materials with albumin-functionalized silica microspheres due to their capacity to adsorb bilirubin, one of the toxins responsible for liver failure. Two configurations of the dialysis module were tested: one involved dispersing the adsorbent particles in dialysis fluid, while the other did not require dialysis fluid. The results demonstrate the superior performance of the first configuration compared to the second. Although the clinical applicability of these models remains distant from the current stage, further studies will focus on optimizing these models to develop a more compact and wearable device.

Hemocompatible hemoadsorbent for effective removal of protein-bound toxin in serum

Resin hemoperfusion is a life-saving treatment for drug intoxication or hepatic failure of patients. However, current resin adsorbents exhibit a limited hemocompatibility or low adsorption efficiency, representing a major roadblock to successful clinical applications. In this work, we developed a hemocompatible and effective hemoadsorbent based on polystyrene resin (H103) microparticles encapsulated in anti-biofouling zwitterionic poly(carboxybetaine) (PCB) hydrogels. Apart from a strong mechanical stability, this PCB-based adsorbent (PCB-H103) exhibited excellent hemocompatibility (hemolysis ratio was ∼0.64%), which was attributed to the anti-biofouling property of PCB hydrogel. In addition, it can efficiently adsorb both small and middle molecular weight molecules in phosphate-buffered saline, and the efficiencies were significantly higher than poly(ethylene glycol) methacrylate-based and poly(2-hydroxyethyl methacrylate)-based adsorbent counterparts, indicating the favorable permeability of PCB hydrogel coating. More importantly, PCB-H103 could effectively remove protein-bound toxins including phenol red and bilirubin in bovine serum albumin solution or even in 100% fetal bovine serum (FBS). In 100% FBS, the adsorption capacity of PCB-H103 towards bilirubin was 8.3 times higher than that of pristine clinical-scale resin beads. Findings in this work may provide a new strategy for the development of modern resin hemoperfusion technology.

Functional polyethersulfone particles for the removal of bilirubin

In this study, polyethersulfone/poly (glycidyl methacrylate) particles are prepared via in situ cross-linked polymerization coupled with a phase inversion technique. The surfaces of these particles are then further modified by grafting amino groups using tetraethylenepentamine, dethylenetriamine, ethylenediamine, or 1,6-hexanediamine for the removal of bilirubin. The particles are characterized by Flourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Batch adsorption experiments are performed to verify the adsorption capability, and the effect of bilirubin initial concentration, bovine serum albumin concentration, and solution ionic strength on the adsorption is also investigated. In addition, both adsorption kinetic and isotherm models are applied to analyze the adsorption process of bilirubin, and a particle column is used to further study the bilirubin removal ability.To prove that the method was a universal portal to prepare functional particles, polysulfone, polystyrene, and poly(vinylidene fluoride) based functional particles were also prepared and used for the removal of bilirubin. This study and the results indicated that the particles had a great potential to be used in hemoperfusion treatment for hyperbilirubinemia.

[Preparation of bovine serum albumin immobilized adsorbent for specific adsorption of bilirubin]

Serum bilirubin concentration is greatly elevated in certain diseases such as hyperbilirubinemia and severe hepatitis. Lowering the level of bilirubin is one of the major targets of many therapies such as plasma exchange and hemoperfusion. In this study, a bilirubin specific adsorbent was prepared by covalently immobilizing bovine serum albumin (BSA) onto macroporous poly (glycidyl methacrylate-co-trimethylolpropane trimethacrylate) microspheres. The resulting BSA immobilized adsorbent (BIA) demonstrated good performance in adsorption of bilirubin with an adsorption capacity of 48.7 mg/g. Presence of BSA in bilirubin solution significantly lowered the adsorption capacity of the adsorbent due to the tight binding of bilirubin onto BSA. Adsorption performance of the adsorbent for bilirubin was improved with the elevation of temperature. The adsorbent demonstrated good stability even after 31 d of storage at - 80 degrees C in that there was almost no change in adsorption capacity for bilirubin. These results indicated that the prepared BSA immobilized adsorbent could be an alternative choice for specific adsorption of bilirubin.