Characterization of aqueous biphasic systems composed of ionic liquids and a citrate-based biodegradable salt

Application of biodegradable cholinium ionic liquids for the extraction of 5-hydroxymethylfurfural (HMF) from honey

5-Hydroxymethylfurfural (HMF), a Maillard reaction product, can be formed when honey is subjected to heat treatment or a long storage time, becoming volatile and toxic depending on its concentration. The fact that, until today, there is no literature data on the extraction of 5-hydroxymethylfurfural (HMF) from honey using ionic liquids directed the investigation of the influence of biodegradable cholinium ionic liquids on the formation of aqueous biphasic systems and the application of these systems for the extraction of HMF from honey. The influence of anions of synthesised ionic liquids on the construction of biphasic systems in which an inorganic salt was used as a salting agent was investigated. Then, the extraction of HMF in these systems was examined, and the mechanisms of HMF extraction using ionic liquids were explained using computer simulations. Examining the effect of cholinium ionic liquids (choline chloride ([Ch][Cl]), cholinium nicotinate ([Ch][Nic]), cholinium propionate ([Ch][Prop]), and cholinium butyrate ([Ch][But])) on the formation of aqueous biphasic systems by comparing the phase diagrams, it was concluded that the ability of ionic liquids to form an aqueous biphasic system with tripotassium phosphate (K3PO4) decreases in the following order: [Ch][But] ≈ [Ch][Prop] > [Ch][Nic] > [Ch][Cl]. By applying all tested aqueous biphasic systems for the extraction of HMF from honey, an extraction efficiency of more than 89% was achieved. Complete extraction was achieved using the extraction system with [Ch][But], while the weakest ability to extract HMF was exhibited by the system with [Ch][Cl]. The mechanisms of HMF extraction using ionic liquids are explained on the basis of the optimised structures of the ionic liquid systems with HMF, together with the visualisation of non-covalent interactions, and on the basis of the calculated binding energies ΔGbin, which can be used as a good predictor of the extraction potential of newly synthesised ionic liquids.

Recent progress in the synthesis of all-aqueous two-phase droplets using microfluidic approaches

An aqueous two-phase system (ATPS) is a system with liquid-liquid phase separation and shows great potential for the extraction, separation, purification, and enrichment of proteins, membranes, viruses, enzymes, nucleic acids, and other biomolecules because of its simplicity, biocompatibility, and wide applicability [1-4]. The clear aqueous-aqueous interface of ATPSs is highly advantageous for their implementation, therefore making ATPSs a green alternative approach to replace conventional emulsion systems, such as water-in-oil droplets. All aqueous emulsions (water-in-water, w-in-w) hold great promise in the biomedical field as glucose sensors [5] and promising carriers for the encapsulation and release of various biomolecules and nonbiomolecules [6-10]. However, the ultralow interfacial tension between the two phases is a hurdle in generating w-in-w emulsion droplets. In the past, bulk emulsification and electrospray techniques were employed for the generation of w-in-w emulsion droplets and the fabrication of microparticles and microcapsules in the later stage. Bulk emulsification is a simple and low-cost technique; however, it generates polydisperse w-in-w emulsion droplets. Another technique, electrospray, involves easy experimental setups that can generate monodisperse but nonspherical w-in-w emulsion droplets. In comparison, microfluidic platforms provide monodisperse w-in-w emulsion droplets with spherical shapes, deal with the small volumes of solutions and short reaction times and achieve portability and versatility in their design through rapid prototyping. Owing to several advantages, microfluidic approaches have recently been introduced. To date, several different strategies have been explored to generate w-in-w emulsions and multiple w-in-w emulsions and to fabricate microparticles and microcapsules using conventional microfluidic devices. Although a few review articles on ATPSs emulsions have been published in the past, to date, few reviews have exclusively focused on the evolution of microfluidic-based ATPS droplets. The present review begins with a brief discussion of the history of ATPSs and their fundamentals, which is followed by an account chronicling the integration of microfluidic devices with ATPSs to generate w-in-w emulsion droplets. Furthermore, the stabilization strategies of w-in-w emulsion droplets and microfluidic fabrication of microparticles and microcapsules for modern applications, such as biomolecule encapsulation and spheroid construction, are discussed in detail in this review. We believe that the present review will provide useful information to not only new entrants in the microfluidic community wanting to appreciate the findings of the field but also existing researchers wanting to keep themselves updated on progress in the field.

Recovery Techniques Enabling Circular Chemistry from Wastewater

In an era where it becomes less and less accepted to just send waste to landfills and release wastewater into the environment without treatment, numerous initiatives are pursued to facilitate chemical production from waste. This includes microbial conversions of waste in digesters, and with this type of approach, a variety of chemicals can be produced. Typical for digestion systems is that the products are present only in (very) dilute amounts. For such productions to be technically and economically interesting to pursue, it is of key importance that effective product recovery strategies are being developed. In this review, we focus on the recovery of biologically produced carboxylic acids, including volatile fatty acids (VFAs), medium-chain carboxylic acids (MCCAs), long-chain dicarboxylic acids (LCDAs) being directly produced by microorganisms, and indirectly produced unsaturated short-chain acids (USCA), as well as polymers. Key recovery techniques for carboxylic acids in solution include liquid-liquid extraction, adsorption, and membrane separations. The route toward USCA is discussed, including their production by thermal treatment of intracellular polyhydroxyalkanoates (PHA) polymers and the downstream separations. Polymers included in this review are extracellular polymeric substances (EPS). Strategies for fractionation of the different fractions of EPS are discussed, aiming at the valorization of both polysaccharides and proteins. It is concluded that several separation strategies have the potential to further develop the wastewater valorization chains.

Aqueous Biphasic Systems Comprising Natural Organic Acid-Derived Ionic Liquids

Despite the progress achieved by aqueous biphasic systems (ABSs) comprising ionic liquids (ILs) in extracting valuable proteins, the quest for bio-based and protein-friendly ILs continues. To address this need, this work uses natural organic acids as precursors in the synthesis of four ILs, namely tetrabutylammonium formate ([N4444][HCOO]), tetrabutylammonium acetate ([N4444][CH3COO]), tetrabutylphosphonium formate ([P4444][HCOO]), and tetrabutylphosphonium acetate ([P4444][CH3COO]). It is shown that ABSs can be prepared using all four organic acid-derived ILs paired with the salts potassium phosphate dibasic (K2HPO4) and tripotassium citrate (C6H5K3O7). According to the ABSs phase diagrams, [P4444]-based ILs outperform their ammonium congeners in their ability to undergo liquid–liquid demixing in the presence of salts due to their lower hydrogen-bond acidity. However, deviations to the Hofmeister series were detected in the salts’ effect, which may be related to the high charge density of the studied IL anions. As a proof of concept for their extraction potential, these ABSs were evaluated in extracting human transferrin, allowing extraction efficiencies of 100% and recovery yields ranging between 86 and 100%. To further disclose the molecular-level mechanisms behind the extraction of human transferrin, molecular docking studies were performed. Overall, the salting-out exerted by the salt is the main mechanism responsible for the complete extraction of human transferrin toward the IL-rich phase, whereas the recovery yield and protein-friendly nature of these systems depend on specific “IL-transferrin” interactions.

Synthesis of Purine-Based Ionic Liquids and Their Applications

Bio-based ionic liquids (ILs) are being increasingly sought after, as they are more sustainable and eco-friendly. Purines are the most widely distributed, naturally occurring N-heterocycles, but their low water-solubility limits their application. In this work, four purines (theobromine, theophylline, xanthine, and uric acid) were combined with the cation tetrabutylammonium to synthesize bio-based ILs. The physico-chemical properties of the purine-based ILs were characterized, including their melting and decomposition temperatures and water-solubility. The ecotoxicity against the microalgae Raphidocelis subcapitata was also determined. The ILs show good thermal stability (>457 K) and an aqueous solubility enhancement ranging from 53- to 870-fold, in comparison to their respective purine percursors, unlocking new prospects for their application where aqueous solutions are demanded. The ecotoxicity of these ILs seems to be dominated by the cation, and it is similar to chloride-based IL, emphasizing that the use of natural anions does not necessarily translate to more benign ILs. The application of the novel ILs in the formation of aqueous biphasic systems (ABS), and as solubility enhancers, was also evaluated. The ILs were able to form ABS with sodium sulfate and tripotassium citrate salts. The development of thermoresponsive ABS, using sodium sulfate as a salting-out agent, was accomplished, with the ILs having different thermosensitivities. In addition, the purine-based ILs acted as solubility enhancers of ferulic acid in aqueous solution.

Opposite Effects Induced by Cholinium-Based Ionic Liquid Electrolytes in the Formation of Aqueous Biphasic Systems Comprising Polyethylene Glycol and Sodium Polyacrylate

Cholinium-based ionic liquids ([Ch]-based ILs) were investigated as electrolytes in the formation of aqueous biphasic systems (ABS) composed of polyethylene glycol (PEG) and sodium polyacrylate (NaPA) polymers. Both enhancement and decrease in the liquid-liquid demixing ability induced by electrolytes in PEG-NaPA aqueous biphasic systems were observed. It is shown that the ILs that most extensively partition to the PEG-rich phase tend to act as inorganic salts enhancing the two-phase formation ability, while those that display a more significant partition to the NaPA-rich phase decrease the ABS formation capacity. The gathered results allowed us to confirm the tailoring ability of ILs and to identify, for the first time, opposite effects induced by electrolytes on the PEG-NaPA ABS formation ability. The distribution of the electrolyte ions between the coexisting phases and the polyelectrolyte ion compartmentalization are key factors behind the formation of PEG-NaPA-based ABS.

Advances Brought by Hydrophilic Ionic Liquids in Fields Involving Pharmaceuticals

The negligible volatility and high tunable nature of ionic liquids (ILs) have been the main drivers of their investigation in a wide diversity of fields, among which is their application in areas involving pharmaceuticals. Although most literature dealing with ILs is still majorly devoted to hydrophobic ILs, evidence on the potential of hydrophilic ILs have been increasingly provided in the past decade, viz., ILs with improved therapeutic efficiency and bioavailability, ILs with the ability to increase drugs' aqueous solubility, ILs with enhanced extraction performance for pharmaceuticals when employed in biphasic systems and other techniques, and ILs displaying low eco/cyto/toxicity and beneficial biological activities. Given their relevance, it is here overviewed the applications of hydrophilic ILs in fields involving pharmaceuticals, particularly focusing on achievements and advances witnessed during the last decade. The application of hydrophilic ILs within fields involving pharmaceuticals is here critically discussed according to four categories: (i) to improve pharmaceuticals solubility, envisioning improved bioavailability; (ii) as IL-based drug delivery systems; (iii) as pretreatment techniques to improve analytical methods performance dealing with pharmaceuticals, and (iv) in the recovery and purification of pharmaceuticals using IL-based systems. Key factors in the selection of appropriate ILs are identified. Insights and perspectives to bring renewed and effective solutions involving ILs able to compete with current commercial technologies are finally provided.

Ionic liquids as alternative solvents for energy conservation and environmental engineering

Because of industrialization and modernization, phenomenal changes have taken place in almost all spheres of life. Consequently, the consumption of energy resources and the cases of environmental hazards have risen to an unprecedentedly high level. A development model with due consideration to nature and an efficient utilization of energy sources has become the need of the hour, in order to ensure a sustainable balance between the environmental and technological needs. Recent studies have identified the suitability of ionic liquids (ILs), often labeled as ‘green solvents’, in the efficient utilization of energy resources and activities such as bio-extraction, pollution control, CO2 capture, waste management etc. in an environmentally friendly manner. The advent of magnetic ionic liquids (MILs) and deep eutectic solvents (DESs) have opened possibilities for a circular economic approach in this filed. This review intends to analyze the environmental and energy wise consumption of a wide variety of ionic liquids and their potential towards future.

Aqueous biphasic systems formed in (zwitterionic salt+inorganic salt) mixtures

The manuscript reports on a new class of aqueous biphasic systems (ABSs) formed in mixtures of inorganic salts (ISs) and zwitterionic salts (ZWSs). Aqueous ternary phase diagrams characterized by a binodal curve were determined for systems consisting of four ISs, K3PO4, K2HPO4, K2HPO4/KH2PO4, and K2CO3, and three structurally similar ZWSs differing in hydrophobicity. Comparison of phase behaviour of ABSs composed of ZWSs, ionic liquids (ILs) and zwitterions was provided. Potential of ZWSs based systems for extraction of aromatic molecules and amino acids, such as glycine, L-tryptophan, DL-phenylalanine, eugenol, and phenol was examined. Feasibility and limitations of isolation of products after partition and recovery of ZWS were discussed.

Ionic Liquid Aqueous Two-Phase Systems From a Pharmaceutical Perspective

Aqueous Two-Phase Systems (ATPSs) have been extensively studied for their ability to simultaneously separate and purify active pharmaceutical ingredients (APIs) and key intermediates with high yields and high purity. Depending on the ATPS composition, it can be adapted for the separation and purification of cells, nucleic acids, proteins, antibodies, and small molecules. This method has been shown to be scalable, allowing it to be used in the milliliter scale for early drug development to thousands of liters in manufacture for commercial supply. The benefits of ATPS in pharmaceutical separations is increasingly being recognized and investigated by larger pharmaceutical companies. ATPSs use identical instrumentation and similar methodology, therefore a change from traditional methods has a theoretical low barrier of adoption. The cost of typical components used to form an ATPS at large scale, particularly that of polymer-polymer systems, is the primary challenge to widespread use across industry. However, there are a few polymer-salt examples where the increase in yield at commercial scale justifies the cost of using ATPSs for macromolecule purification. More recently, Ionic Liquids (ILs) have been used for ATPS separations that is more sustainable as a solvent, and more economical than polymers often used in ATPSs for small molecule applications. Such IL-ATPSs still retain much of the attractive characteristics such as customizable chemical and physical properties, stability, safety, and most importantly, can provide higher yield separations of organic compounds, and efficient solvent recycling to lower financial and environmental costs of large scale manufacturing.

Extractive Fermentation for Process integration and amplified pullulan production by A. pullulans in Aqueous Two Phase Systems

Extractive fermentation technique or in situ product recovery process is a novel technique to segregate the desired product simultaneously in a fermentation process. For economic and high yield production of pullulan, Extractive fermentation process was applied fermentation process of A. pullulans. Aqueous Two Phase system (ATPS) systems were designed with various molecular mass of PEG (400, 600, 4000 and 6000) and dextran or mono/bi-sodium phosphate salts. Systems with short Tie Line length (TLL) 6.7 and 7.5% w/w for PEG-Salt and PEG-dextran respectively were chosen. Volume ratio for all the systems was kept constant at 1.0 and pH 7.0 for PEG-dextran and PEG-NaH2PO4 was maintained, whereas pH 9.0 was kept for PEG-Na2HPO4. A. pullulans, was found to be viable with PEG-NaH2PO4 and PEG-dextran systems. The biomass partitioned in the PEG rich top phase and the exopolysaccharide pullulan shown affinity towards the bottom phase. A maximum yield (36.47 g/L) was found with PEG 4000-Dextran 500 system of extractive fermentation process. The proposed process aptly integrates upstream and downstream process for continuous production and recovery of pullulan from the biomass, thus reducing the time quotient of the whole process.

Bioconjugation of enzyme with silica microparticles: a promising platform for α-amylase partitioning

Here, we report the implementation of α-amylase conjugated silica microparticles for improvement of α-amylase partitioning in a PEG–organic salt-based aqueous two phase system. A direct reduction method was employed for the synthesis of silica microparticles with simultaneous introduction of α-amylase. In this context, we synthesized three different silica α-amylase conjugated microparticles with variation of tetraethyl orthosilicate concentration, and thus the effect of final particle size and enzyme loading on partitioning was also studied. The partition coefficient ratio of α-amylase to Si:α-amylase of 2.186 : 21.701 validated an almost tenfold increase in separation. The microscopic structure of the system was thoroughly investigated in order to understand the extraction mechanism and any possible denaturation. Improved partition coefficients can be interpreted by the formation of α-amylase–silica–PEG carriers. Furthermore, circular dichroism (CD) spectra validated partial unfolding of the enzyme.

Here, we report the implementation of α-amylase conjugated silica microparticles for improvement of α-amylase partitioning in a PEG–organic salt-based aqueous two phase system.

Understanding the Effect of Ionic Liquids as Adjuvants in the Partition of Biomolecules in Aqueous Two-Phase Systems Formed by Polymers and Weak Salting-Out Agents

Ionic liquids (ILs) as adjuvants in polymer-salt aqueous two-phase systems (ATPS) have been used to improve the extraction of biomolecules. However, the impact of ILs as adjuvants on the partition of biomolecules is still poorly understood. Previous works mostly focused on ATPS based on strong salting-out agents, which may mask the IL effect. In this work, ATPS formed by polyethylene glycol (PEG 400) and a weak salting-out salt ((NH₄)₂SO₄) with a wide number of ILs as adjuvants (chloride-based combined with cholinium, imidazolium, pyrrolidinium, piperidinium, tetralkylammonium and tetralkylphosphonium cations) were investigated. The respective phase diagrams were determined, and the systems extraction performance for a wide range of biomolecules (phenolic compounds, alkaloids and amino acids) was investigated. The results obtained show that ILs as adjuvants in polymer-salt ATPS modulate the partition of biomolecules. In particular, more hydrophobic ILs significantly enhance the partition of more hydrophobic biomolecules to the PEG-rich phase (where the IL is enriched). Furthermore, the intensity of the IL effect is more pronounced when using weak salting-out agents. A linear correlation between the biomolecules and the ILs partition coefficients, and with the biomolecules octanol-water partition coefficients, was found. In most ATPS formed by polymers and salts using ILs as adjuvants, the biomolecules partition is driven by the ILs partition and by the difference in hydrophobicity between the coexisting phases.

Glycine-betaine ionic liquid analogues as novel phase-forming components of aqueous biphasic systems

Given the biotechnology advances observed in recent years in terms of upstream, the development of effective downstream processes becomes mandatory to decrease the associated costs of biotechnological-based products. Although a large interest has been devoted to ionic-liquid-based aqueous biphasic systems (IL-based ABS) as tailored separation platforms, imidazolium-based ILs have been the preferred choice as phase-forming agents. To overcome some toxicity and biodegradability issues associated to imidazolium-based ILs, novel ABS composed of ILs analogues of glycine-betaine (AGB-ILs) are here proposed and investigated. Five AGB-ILs were synthesized, characterized in terms of ecotoxicity, and applied toward the development of novel ABS formed with Na₂ SO₄ . Three commercial ILs were also investigated for comparison purposes. The respective ABS ternary phase diagrams, as well as the tie-lines and tie-line lengths, were determined at 25°C. Finally, their performance as extraction strategies was evaluated with five amino acids (L-tryptophan, L-phenylalanine, D-phenylalanine, L-tyrosine and L-3,4-dihydroxyphenylalanine/L-dopa). In all studied systems amino acids preferentially migrate to the IL-rich phase, and with AGB-ILs, the amino acid extraction efficiencies to the IL-rich phase range between 65% and 100%, obtained in a single-step. Furthermore, the studied AGB-ILs display a higher ability to form ABS and to extract amino acids than ABS composed of more traditional and commercial ILs. In summary, novel ABS composed of AGB-ILs can be formed and used as separation routes of value-added compounds of biotechnological interest. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018 © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1205-1212, 2018.

Potential of Aqueous Two-Phase Systems for the Separation of Levodopa from Similar Biomolecules

BACKGROUND

Levodopa is a precursor of several neurotransmitters, such as dopamine, and is used in the treatment of the Parkinson's disease. In this work, an alternative strategy was studied to separate levodopa from similar biomolecules using aqueous two-phase systems (ATPS).

RESULTS

Ternary ATPS composed of polyethylene glycol (PEG) 400 or ionic liquids (ILs), citrate buffer (K3C6H5O7/C6H8O7) at pH 7.0 and water, and quaternary ATPS composed of PEG 400, K3C6H5O7/C6H8O7 at pH 7.0, water and the same ILs at 5 wt%, were studied. The respective liquid-liquid phase diagrams were determined at 298 K to appraise the mixture compositions required to form two-phase systems, followed by studies of the partition of levodopa and structurally similar biomolecules (dopamine, L-phenylalanine, and L-tyrosine). Their partition coefficients and extraction efficiencies have been determined, and the selectivity of the ATPS to separate levodopa from the remaining biomolecules evaluated.

CONCLUSION

The results obtained indicated that PEG-based ATPS were the most effective to separate levodopa from L-phenylalanine while the separation from the other biomolecules was better using IL-based ATPS, in particular those based on [P4444]Cl and [N4444]Cl, with extraction efficiencies of levodopa to the salt-rich phase ranging between 62.7 and 74.0%, and of the remaining biomolecules to polymer/IL-rich phase up to 91.5%.

Development of aqueous two-phase systems comprising poly ethylene glycol and dextran for purification of pullulan: Phase diagrams and fiscal analysis

Pullulan is a commercially important Exopolysaccharide (EPS) with wide-spread applications which is produced by Aureobasidium pullulans. The alternative α (1 4) & α (1 6) configuration in pullulan provides it the specific structural and conformational properties. Pullulan is currently being exploited in food, health care, pharmacy, lithography, cosmetics. The fermented broth is processed by organic solvent precipitation for isolation and purification of pullulan. In this study, we have tried to analyze the potential of aqueous two phase system as an alternate technique to extract pullulan from fermented broth. Including this viability of ATPS was also compared with conventional organic solvent precipitation system in terms of cost and time. It was found that ATPS process produced a higher yield of pullulan (80.56%) than organic solvent precipitation method (71.6%). ATPS was also found more economical and less time consuming method.

Hydrogen bond basicity of ionic liquids and molar entropy of hydration of salts as major descriptors in the formation of aqueous biphasic systems

Aqueous biphasic systems (ABS) composed of ionic liquids (ILs) and conventional salts have been largely investigated and successfully used in separation processes, for which the determination of the corresponding ternary phase diagrams is a prerequisite. However, due the large number of ILs that can be prepared and their high structural versatility, it is impossible to experimentally cover and characterize all possible combinations of ILs and salts that may form ABS. The development of tools for the prediction and design of IL-based ABS is thus a crucial requirement. Based on a large compilation of experimental data, a correlation describing the formation of IL-based ABS is shown here, based on the hydrogen-bonding interaction energies of ILs (EHB) obtained by the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) and the molar entropy of hydration of the salt ions. The ability of the proposed model to predict the formation of novel IL-based ABS is further ascertained.

Mechanisms ruling the partition of solutes in ionic-liquid-based aqueous biphasic systems - the multiple effects of ionic liquids

In the past decade, the remarkable potential of ionic-liquid-based aqueous biphasic systems (IL-based ABSs) to extract and purify a large range of valued-added biocompounds has been demonstrated. However, the translation of lab-scale experiments to an industrial scale has been precluded by a poor understanding of the molecular-level mechanisms ruling the separation or partition of target compounds between the coexisting phases. To overcome this limitation, we carried out a systematic evaluation of specific interactions, induced by ILs and several salts used as phase-forming components, and their impact on the partition of several solutes in IL-based ABSs. To this end, the physicochemical characterization of ABSs composed of imidazolium-based ILs, three salts (Na2SO4, K2CO3 and K3C6H5O7) and water was performed. The ability of the coexisting phases to participate in different solute-solvent interactions (where "solvent" corresponds to each ABS phase) was estimated based on the Gibbs free energy of transfer of a methylene group between the phases in equilibrium, ΔG(CH2), and on the Kamlet-Taft parameters - dipolarity/polarizability (π*), hydrogen-bonding donor acidity (α) and hydrogen-bonding acceptor basicity (β) - of the coexisting phases. Relationships between the partition coefficients, the phase properties expressed as Kamlet-Taft parameters and COSMO-RS descriptors were established, highlighting the ability of ILs to establish specific interactions with given solutes. The assembled results clearly support the idea that the partition of solutes in IL-based ABSs is due to multiple effects resulting from both global solute-solvent and specific solute-IL interactions. Solute-IL specific interactions are often dominant in IL-based ABSs, explaining the higher partition coefficients, extraction efficiencies and selectivities observed with these systems when compared to more traditional ones majorly composed of polymers.

Alternative probe for the determination of the hydrogen-bond acidity of ionic liquids and their aqueous solutions

Although highly relevant to a priori select adequate solvents for a given application, the determination of the hydrogen-bond acidity or proton donor ability of aqueous solutions of ionic liquids is a difficult task due to the poor solubility of the commonly used probes in aqueous media. In this work, we demonstrate the applicability of the pyridine-N-oxide probe to determine the hydrogen-bond acidity of both neat ionic liquids and their aqueous solutions, based on ¹³C NMR chemical shifts, and the suitability of these values to appraise the ability of ionic liquids to form aqueous two-phase systems.

Improved Monitoring of Aqueous Samples by the Concentration of Active Pharmaceutical Ingredients using Ionic-Liquid-based Systems

Fluoroquinolones (FQs) and Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) are two classes of Active Pharmaceutical Ingredients (APIs), widespreadly used in human healthcare and as veterinary drugs, and that have been found throughout the water cycle in the past years. These two classes of APIs are commonly present in aqueous streams in concentrations ranging from ng.L-1 to µg.L-1. Despite such low concentrations, these contaminants tend to bioaccumulate, leading to serious environmental and health issues after chronic exposure. The low concentrations of FQs and NSAIDs in aqueous media also render their difficult identification and quantification, wich may result in an unefficient evaluation of their environmental impact and persistence. Therefore, the development of alternative pre-treatment techniques for their extraction and concentration from aqueous samples is a crucial requirement. In this work, liquid-liquid systems, namely ionic-liquid-based aqueous biphasic systems (IL-based ABS), were tested as simultaneous extraction and concentration platforms of FQs and NSAIDs. ABS composed of imidazolium-, ammonium- and phosphonium-based ILs and a citrate-based salt (C6H5K3O7) were evaluated for the single-step extraction and concentration of three FQs (ciprofloxacin, enrofloxacin and norfloxacin) and three NSAIDs (diclofenac, naproxen and ketoprofen) from aqueous samples. Outstanding one-step extraction efficiencies of APIs close to 100% were obtained. Furthermore, concentration factors of both FQs and NSAIDs were optimized by an appropriate manipulation of the phase-forming components compositions to tailor the volumes of the coexisting phases. Concentration factors of 1000-fold of both FQS and NSAIDs were obtained in a single-step, without reaching the saturation of the IL-rich phase. The concentration of APIs up to the mg.L-1 allowed their easy and straightforward identification and quantification by High-Performance Liquid Chromatography (HPLC) coupled to an UV detector, as shown either with model aqueous samples or real wastewater effluent samples.

Good's Buffer Ionic Liquids as Relevant Phase-Forming Components of Self-Buffered Aqueous Biphasic Systems

A series of new self-buffering ionic liquids (ILs) based on Good's buffers (GBs) anions and the tetrabutylphosphonium cation ([P₄₄₄₄]⁺) was here synthesized and characterized. The self-buffering behaviour of the GB-ILs was confirmed by measuring their protonation constants by potentiometry. Further, their ability to form aqueous biphasic systems with the biodegradable potassium citrate salt was evaluated, and further investigated for the extraction of proteins, using bovine serum albumin (BSA) as a model protein. If these ionic structures display self-buffering characteristics as well as a low toxicity towards the luminescent bacteria Vibrio fischeri, they were additionally found to be highly effective in the formation of ABS and in the extraction of BSA - extraction efficiencies of 100% to the IL-rich phase obtained in a single-step. The BSA secondary structure in the aqueous IL-rich solutions was evaluated through infrared spectroscopic studies revealing the protein-friendly nature of the synthesized ILs. Dynamic light scattering (DLS), "COnductor-like Screening MOdel for Real Solvents" (COSMO-RS), and molecular docking studies were finally carried out to better understand the main driving forces of the extraction process. The results suggest that van der Waals and hydrogen-bonding interactions are important driving forces of the protein migration towards the GB-IL-rich phase, while the molecular docking investigations demonstrated a stabilizing effect of the studied ILs over the protein.

Simultaneous extraction and concentration of water pollution tracers using ionic-liquid-based systems

Human activities are responsible for the release of innumerous substances into the aquatic environment. Some of these substances can be used as pollution tracers to identify contamination sources and to prioritize monitoring and remediation actions. Thus, their identification and quantification are of high priority. However, due to their presence in complex matrices and at significantly low concentrations, a pre-treatment/concentration step is always required. As an alternative to the currently used pre-treatment methods, mainly based on solid-phase extractions, aqueous biphasic systems (ABS) composed of ionic liquids (ILs) and K₃C₆H₅O₇ are here proposed for the simultaneous extraction and concentration of mixtures of two important pollution tracers, caffeine (CAF) and carbamazepine (CBZ). An initial screening of the IL chemical structure was carried out, with extraction efficiencies of both tracers to the IL-rich phase ranging between 95 and 100%, obtained in a single-step. These systems were then optimized in order to simultaneously concentrate CAF and CBZ from water samples followed by HPLC-UV analysis, for which no interferences of the ABS phase-forming components and other interferents present in a wastewater effluent sample have been found. Based on the saturation solubility data of both pollution tracers in the IL-rich phase, the maximum estimated concentration factors of CAF and CBZ are 28595- and 8259-fold. IL-based ABS can be thus envisioned as effective pre-treatment techniques of environmentally-related aqueous samples for a more accurate monitoring of mixtures of pollution tracers.

Evaluation of the effect of ionic liquids as adjuvants in polymer-based aqueous biphasic systems using biomolecules as molecular probes

Aqueous biphasic systems (ABS) have been largely investigated for the extraction, separation and/or purification of biomolecules. Recently, the use of ionic liquids (ILs) as additives in conventional polymer-based ABS was proposed to overcome the limited range of polarities of the coexisting phases. However, the impact of ILs on the partitioning of biomolecules on IL additivated ABS is not universal and is still poorly understood. Aiming at obtaining additional insights on this matter, the effects of the chemical structure of the IL, tie-line length (TLL) and biomolecule nature upon the partition of a series of model biomolecules were investigated. For this purpose, ternary ABS (composed of polyethylene glycol (PEG) 400, citrate buffer at pH 7.0, and water), and several quaternary ABS (composed of PEG 400, citrate buffer at pH 7.0, water and ILs at 5 wt%), were prepared using different chloride-based ILs ([C₄mim]Cl, [C₄mpyr]Cl, [C₄mpip]Cl, [P₄₄₄₄]Cl and [N₄₄₄₄]Cl). The partition of a wide range of biomolecules in these systems (gallic acid, vanillic acid, eugenol, nicotine, caffeine, l-tryptophan, l-phenylalanine and l-tyrosine), used here as molecular probes, was studied. These solutes were chosen due to their wide range of polarities. The results obtained support the concept that ILs, when used as adjuvants in polymer-based ABS, change the coexisting phases' characteristics and modify the partition behavior of biomolecules. In general, a positive effect derived from the use of ILs as adjuvants in PEG-salt systems is observed, particularly when dealing with more hydrophobic biomolecules, whereas IL + salt ABS perform better in the extraction of more hydrophilic biomolecules. The favourable partition of more hydrophilic biomolecules in IL + salt ABS seems to be ruled by specific interactions with the IL, while the favourable partition of more hydrophobic biomolecules in PEG + salt and PEG + salt + IL seems to be governed by the differences in the phases hydrophobicities. It is shown that ILs preferentially migrate to the PEG-rich phase, and that there is a correlation between the partition coefficients of the biomolecules and ILs and the biomolecules octanol-water partition coefficients.

Ionic-Liquid-Mediated Extraction and Separation Processes for Bioactive Compounds: Past, Present, and Future Trends

Ionic liquids (ILs) have been proposed as promising media for the extraction and separation of bioactive compounds from the most diverse origins. This critical review offers a compilation on the main results achieved by the use of ionic-liquid-based processes in the extraction and separation/purification of a large range of bioactive compounds (including small organic extractable compounds from biomass, lipids, and other hydrophobic compounds, proteins, amino acids, nucleic acids, and pharmaceuticals). ILs have been studied as solvents, cosolvents, cosurfactants, electrolytes, and adjuvants, as well as used in the creation of IL-supported materials for separation purposes. The IL-based processes hitherto reported, such as IL-based solid-liquid extractions, IL-based liquid-liquid extractions, IL-modified materials, and IL-based crystallization approaches, are here reviewed and compared in terms of extraction and separation performance. The key accomplishments and future challenges to the field are discussed, with particular emphasis on the major lacunas found within the IL community dedicated to separation processes and by suggesting some steps to overcome the current limitations.

Improving the extraction and purification of immunoglobulin G by the use of ionic liquids as adjuvants in aqueous biphasic systems

Immunoglobulins G (IgG) could become widespread biopharmaceuticals if cost-efficient processes for their extraction and purification are available. In this work, aqueous biphasic systems (ABS) composed of polyethylene glycols and a buffered salt, and with ionic liquids (ILs) as adjuvants, have been studied as alternative extraction and purification platforms of IgG from a rabbit serum source. Eleven ILs were investigated to provide insights on the chemical features which maximize the IgG partitioning. It is shown that in polymer-salt systems pure IgG preferentially partitions to the polymer-rich phase; yet, the complete extraction was never attained. Remarkably, after the addition of 5wt% of adequate ILs to polymer-salt ABS, the complete extraction of pure IgG in a single-step was accomplished. The best systems and conditions were then applied to the extraction and purification of IgG directly from rabbit serum samples. The complete extraction of IgG in a single-step was maintained while its purity in the polymer-rich phase was enhanced by ca. 37% as compared to the IL-free ABS. The antibody stability was also evaluated revealing that appropriate ILs are able to maintain the IgG stability and can be used as phase-forming components of ABS when envisaging the purification of high-cost biopharmaceuticals.

Good's buffers as novel phase-forming components of ionic-liquid-based aqueous biphasic systems

Aiming at the development of self-buffering and benign extraction/separation processes, this work reports a novel class of aqueous biphasic systems (ABS) composed of ionic liquids (ILs) and organic biological buffers (Good's buffers, GBs). A large array of ILs and GBs was investigated, revealing than only the more hydrophobic and fluorinated ILs are able to form ABS. For these systems, the phase diagrams, tie-lines, tie-line lengths, and critical points were determined at 25 °C. The ABS were then evaluated as alternative liquid-liquid extraction strategies for two amino acids (L-phenylalanine and L-tryptophan). The single-step extraction efficiencies for the GB-rich phase range between 22.4 and 100.0 % (complete extraction). Contrarily to the most conventional IL-salt ABS, in most of the systems investigated, the amino acids preferentially migrate for the most biocompatible and hydrophilic GB-rich phase. Remarkably, in two of the studied ABS, L-phenylalanine completely partitions to the GB-rich phase while L-tryptophan shows a preferential affinity for the opposite phase. These results show that the extraction efficiencies of similar amino acids can be tailored by the design of the chemical structures of the phase-forming components, creating thus new possibilities for the use of IL-based ABS in biotechnological separations.

Hydrogen-bond acidity of ionic liquids: an extended scale

One of the main drawbacks comprising an appropriate selection of ionic liquids (ILs) for a target application is related to the lack of an extended and well-established polarity scale for these neoteric fluids. Albeit considerable progress has been made on identifying chemical structures and factors that influence the polarity of ILs, there still exists a high inconsistency in the experimental values reported by different authors. Furthermore, due to the extremely large number of possible ILs that can be synthesized, the experimental characterization of their polarity is a major limitation when envisaging the choice of an IL with a desired polarity. Therefore, it is of crucial relevance to develop correlation schemes and a priori predictive methods able to forecast the polarity of new (or not yet synthesized) fluids. In this context, and aiming at broadening the experimental polarity scale available for ILs, the solvatochromic Kamlet-Taft parameters of a broad range of bis(trifluoromethylsulfonyl)imide-([NTf2](-))-based fluids were determined. The impact of the IL cation structure on the hydrogen-bond donating ability of the fluid was comprehensively addressed. Based on the large amount of novel experimental values obtained, we then evaluated COSMO-RS, COnductor-like Screening MOdel for Real Solvents, as an alternative tool to estimate the hydrogen-bond acidity of ILs. A three-parameter model based on the cation-anion interaction energies was found to adequately describe the experimental hydrogen-bond acidity or hydrogen-bond donating ability of ILs. The proposed three-parameter model is also shown to present a predictive capacity and to provide novel molecular-level insights into the chemical structure characteristics that influence the acidity of a given IL. It is shown that although the equimolar cation-anion hydrogen-bonding energies (EHB) play the major role, the electrostatic-misfit interactions (EMF) and van der Waals forces (EvdW) also contribute, admittedly in a lower extent, towards the hydrogen-bond acidity of ILs. The new extended scale provided for the hydrogen-bond acidity of ILs is of high value for the design of new ILs for task-specific applications.

Aqueous biphasic systems composed of ionic liquids and acetate-based salts: phase diagrams, densities and viscosities

Ionic-liquid-based aqueous biphasic systems (IL-based ABS) have been largely investigated as promising extraction and purification routes. In this context, the determination of their phase diagrams and the physical properties of the coexisting phases are of high relevance when envisaging their large-scale applications. Low viscosities improve the mass transfer and reduce energy consumptions, while the knowledge on their densities is important for the equipment design. In this work, novel phase diagrams for aqueous solutions of imidazolium-based ILs combined with acetate-based salts, namely KCH3CO2 or NaCH3CO2, are reported and discussed. The ability of the acetate-based salts to induce the phase separation not only depends on the ions hydration energy, but also on the concentration of "free" ions in solution. The tie-lines, tie-line lengths and critical points are also addressed. Experimental measurements of density and viscosity of the coexisting phases, for the different systems and at several compositions and temperatures, are additionally presented. The Othmer-Tobias and Bancroft equations are also applied to ascertain on the tie-lines coherence. It is here shown that low-viscous IL-based ABS, with a high difference in the densities of the coexisting phases, can be formed with organic and biodegradable salts thus offering enhanced features over conventional polymer-based systems.