Sampling location of the inoculum is crucial in designing anodes for microbial fuel cells

Platinum nanoparticles embedded into polyaniline on carbon cloth: improvement of oxygen reduction at cathode of microbial fuel cell used for conversion of medicinal plant wastes into bio-energy

A microbial fuel cell is a biological electrochemical system that extracts electrons stored in organic matter by oxidation using catalytic properties of microorganisms at bioanode. The major problem in such device, is however limited power production due to slow kinetic of oxygen reduction at cathode. It is worthwhile to develop new materials that fulfil these requirements. The polymerization of aniline onto carbon cloth for effective electrodeposition of platinum nanoparticles has been carried out by chronoamperometry and cyclic voltammetry. Three materials were thus elaborated, namely pristine carbon cloth, carbon cloth modified with platinum and carbon cloth modified by polymerization of aniline for immobilization of Pt-nanoparticles. The FTIR spectroscopy analysis revealed characteristic band located in 1720-1650 cm^-1, attributed to imine function, main component in skeleton of polymer PANI chain. The modified materials have been utilized as cathode in cell inoculated with medicinal plant wastes for improvement of oxygen reduction. Modified cathode with CC-PANI-Pt proved higher performances in all respects: increase of cell voltage from 338 to 765 mV and power density from 862 to 1510 mW/m² and abatement of COD of microbial inoculum leachate to 88%. Another feature of cell with modified cathode CC-PANI-Pt, was the enormous electric charge density harvested upon oxidation of 1 mL of acetate 7.62 C/cm² compared to that of cell with pristine CC cathode 0.54 C/cm². Nevertheless, coulombic efficiency for conversion of medicinal plant wastes into bioenergy was relatively lower 9%, making in evidence that elaborated electrochemical device was rather efficient and benificial environmentally than energetically.

Competition of two highly specialized and efficient acetoclastic electroactive bacteria for acetate in biofilm anode of microbial electrolysis cell

Maintaining functional stability of microbial electrolysis cell (MEC) treating wastewater depends on maintaining functional redundancy of efficient electroactive bacteria (EAB) on the anode biofilm. Therefore, investigating whether efficient EAB competing for the same resources (electron donor and acceptor) co-exist at the anode biofilm is key for the successful application of MEC for wastewater treatment. Here, we compare the electrochemical and kinetic properties of two efficient acetoclastic EAB, Geobacter sulfurreducens (GS) and Desulfuromonas acetexigens (DA), grown as monoculture in MECs fed with acetate. Additionally, we monitor the evolution of DA and GS in co-culture MECs fed with acetate or domestic wastewater using fluorescent in situ hybridization. The apparent Monod kinetic parameters reveal that DA possesses higher jmax (10.7 ± 0.4 A/m2) and lower KS, app (2 ± 0.15 mM) compared to GS biofilms (jmax: 9.6 ± 0.2 A/m2 and KS, app: 2.9 ± 0.2 mM). Further, more donor electrons are diverted to the anode for respiration in DA compared to GS. In acetate-fed co-culture MECs, DA (98% abundance) outcompete GS for anode-dependent growth. In contrast, both EAB co-exist (DA: 55 ± 2%; GS: 24 ± 1.1%) in wastewater-fed co-culture MECs despite the advantage of DA over GS based on kinetic parameters alone. The co-existence of efficient acetoclastic EAB with high current density in MECs fed with wastewater is significant in the context of functional redundancy to maintain stable performance. Our findings also provide insight to future studies on bioaugmentation of wastewater-fed MECs with efficient EAB to enhance performance.

Electroactive biofilms on surface functionalized anodes: The anode respiring behavior of a novel electroactive bacterium, Desulfuromonas acetexigens

Surface chemistry is known to influence the formation, composition, and electroactivity of electron-conducting biofilms. However, understanding of the evolution of microbial composition during biofilm development and its impact on the electrochemical response is limited. Here we present voltammetric, microscopic and microbial community analysis of biofilms formed under fixed applied potential for modified graphite electrodes during early (90 h) and mature (340 h) growth phases. Electrodes modified to introduce hydrophilic groups (-NH₂, -COOH and -OH) enhance early-stage biofilm formation compared to unmodified or electrodes modified with hydrophobic groups (-C₂H₅). In addition, early-stage films formed on hydrophilic electrodes are dominated by the gram-negative sulfur-reducing bacterium Desulfuromonas acetexigens while Geobacter sp. dominates on -C₂H₅ and unmodified electrodes. As biofilms mature, current generation becomes similar, and D. acetexigens dominates in all biofilms irrespective of surface chemistry. Electrochemistry of pure culture D. acetexigens biofilms reveal that this microbe is capable of forming electroactive biofilms producing considerable current density of > 9 A/m² in a short period of potential-induced growth (~19 h following inoculation) using acetate as an electron donor. The inability of D. acetexigens biofilms to use H₂ as a sole source electron donor for current generation shows promise for maximizing H₂ recovery in single-chambered microbial electrolysis cell systems treating wastewaters.

Electron donor availability controls scale up of anodic biofilms

The scale up of bioelectrochemical systems (BESs) is a challenging problem that limits the advancement and practical implementation of the technology. The goal of this work is to acquire an understanding of the limitations on scaling up anodic biofilms in BESs. We hypothesized that scaling up is dependent on the availability of electron donors. We tested this hypothesis by enriching anodic biofilms on electrodes of multiple sizes (15 cm² to 466 cm²) and quantified the anodic current densities while varying the electron donor concentrations. The anodic biofilms were enriched on electrodes under two conditions: (1) in raw wastewater and (2) in wastewater supplemented with 20 mM acetate. Following anodic biofilm enrichment, the current density for each electrode was quantified in artificial wastewater medium with variable COD loadings using acetate as an electron donor. Current generated using anodic biofilms scaled up at a high COD loading (1500 mg/L), while current density decreased with increasing electrode size at lower COD loadings. Further, microbial community analysis revealed that the microbial community was independent of the electrode size but dependent on the medium composition during the enrichment phase. These results provide a practical framework for the design of large-scale BESs based on laboratory-scale measurements.

All ecosystems potentially host electrogenic bacteria

Instead of requiring metal catalysts, MFCs utilize bacteria that oxidize organic matter and either transfer electrons to the anode or take electrons from the cathode. These devices are thus based on a wide microbial diversity that can convert a large array of organic matter components into sustainable and renewable energy. A wide variety of explored environments were found to host electrogenic bacteria, including extreme environments. In the present review, we describe how different ecosystems host electrogenic bacteria, as well as the physicochemical, electrochemical and biological parameters that control the currents from MFCs. We also report how using new molecular techniques allowed characterization of electrochemical biofilms and identification of potentially new electrogenic species. Finally we discuss these findings in the context of future research directions.

Enriching distinctive microbial communities from marine sediments via an electrochemical-sulfide-oxidizing process on carbon electrodes

Sulfide is a common product of marine anaerobic respiration, and a potent reactant biologically and geochemically. Here we demonstrate the impact on microbial communities with the removal of sulfide via electrochemical methods. The use of differential pulse voltammetry revealed that the oxidation of soluble sulfide was seen at +30 mV (vs. SHE) at all pH ranges tested (from pH = 4 to 8), while non-ionized sulfide, which dominated at pH = 4 was poorly oxidized via this process. Two mixed cultures (CAT and LA) were enriched from two different marine sediments (from Catalina Island, CAT; from the Port of Los Angeles, LA) in serum bottles using a seawater medium supplemented with lactate, sulfate, and yeast extract, to obtain abundant biomass. Both CAT and LA cultures were inoculated in electrochemical cells (using yeast-extract-free seawater medium as an electrolyte) equipped with carbon-felt electrodes. In both cases, when potentials of +630 or +130 mV (vs. SHE) were applied, currents were consistently higher at +630 then at +130 mV, indicating more sulfide being oxidized at the higher potential. In addition, higher organic-acid and sulfate conversion rates were found at +630 mV with CAT, while no significant differences were found with LA at different potentials. The results of microbial-community analyses revealed a decrease in diversity for both CAT and LA after electrochemical incubation. In addition, some bacteria (e.g., Clostridium and Arcobacter) not well-known to be capable of extracellular electron transfer, were found to be dominant in the electrochemical cells. Thus, even though the different mixed cultures have different tolerances for sulfide, electrochemical-sulfide removal can lead to major population changes.

Electroanalysis of microbial anodes for bioelectrochemical systems: basics, progress and perspectives

Over about the last ten years, microbial anodes have been the subject of a huge number of fundamental studies dealing with an increasing variety of possible application domains.