Good's buffers as novel phase-forming components of ionic-liquid-based aqueous biphasic systems

Homogeneous liquid-liquid extraction as an alternative sample preparation technique for biomedical analysis

Liquid-liquid extraction is a widely used technique of sample preparation in biomedical analysis. In spite of the high pre-concentration capacities of liquid-liquid extraction, it suffers from a number of limitations including time and effort consumption, large organic solvent utilization, and poor performance in highly polar analytes. Homogeneous liquid-liquid extraction is an alternative sample preparation technique that overcomes some drawbacks of conventional liquid-liquid extraction, and allows employing greener organic solvents in sample treatment. In homogeneous liquid-liquid extraction, a homogeneous phase is formed between the aqueous sample and the water-miscible extractant, followed by chemically or physically induced phase separation. To form the homogeneous phase, aqueous samples are mixed with water-miscible organic solvents, water-immiscible solvents/cosolvents, surfactants, or smart polymers. Then, phase separation is induced chemically (adding salt, sugar, or buffer) or physically (changing temperature or pH). This mode is rapid, sustainable, and cost-effective in comparison with other sample preparation techniques. Moreover, homogeneous liquid-liquid extraction is more suitable for the extraction of delicate macromolecules such as enzymes, hormones, and proteins and it is more compatible with liquid chromatography with tandem mass spectrometry, which is a vital technique in metabolomics and proteomics. In this review, the principle, types, applications, automation, and technical aspects of homogeneous liquid-liquid extraction are discussed.

Aqueous Two-Phase System Extraction of Polyketide-Based Fungal Pigments Using Ammonium- or Imidazolium-Based Ionic Liquids for Detection Purpose: A Case Study

Demand for microbial colorants is now becoming a competitive research topic for food, cosmetics and pharmaceutics industries. In most applications, the pigments of interest such as polyketide-based red pigments from fungal submerged cultures are extracted by conventional liquid-liquid extraction methods requiring large volumes of various organic solvents and time. To address this question from a different angle, we proposed, here, to investigate the use of three different aqueous two-phase extraction systems using either ammonium- or imidazolium-based ionic liquids. We applied these to four fermentation broths of Talaromyces albobiverticillius (deep red pigment producer), Emericella purpurea (red pigment producer), Paecilomyces marquandii (yellow pigment producer) and Trichoderma harzianum (yellow-brown pigment producer) to investigate their selective extraction abilities towards the detection of polyketide-based pigments. Our findings led us to conclude that (i) these alternative extraction systems using ionic liquids as greener extractant means worked well for this extraction of colored molecules from the fermentation broths of the filamentous fungi investigated here; (ii) tetrabutylammonium bromide, [N4444]Br-, showed the best pigment extraction ability, with a higher putative affinity for azaphilone red pigments; (iii) the back extraction and recovery of the fungal pigments from ionic liquid phases remained the limiting point of the method under our selected conditions for potential industrial applications. Nevertheless, these alternative extraction procedures appeared to be promising ways for the detection of polyketide-based colorants in the submerged cultures of filamentous fungi.

Understanding the Effect of Ionic Liquids as Adjuvants in the Partition of Biomolecules in Aqueous Two-Phase Systems Formed by Polymers and Weak Salting-Out Agents

Ionic liquids (ILs) as adjuvants in polymer-salt aqueous two-phase systems (ATPS) have been used to improve the extraction of biomolecules. However, the impact of ILs as adjuvants on the partition of biomolecules is still poorly understood. Previous works mostly focused on ATPS based on strong salting-out agents, which may mask the IL effect. In this work, ATPS formed by polyethylene glycol (PEG 400) and a weak salting-out salt ((NH₄)₂SO₄) with a wide number of ILs as adjuvants (chloride-based combined with cholinium, imidazolium, pyrrolidinium, piperidinium, tetralkylammonium and tetralkylphosphonium cations) were investigated. The respective phase diagrams were determined, and the systems extraction performance for a wide range of biomolecules (phenolic compounds, alkaloids and amino acids) was investigated. The results obtained show that ILs as adjuvants in polymer-salt ATPS modulate the partition of biomolecules. In particular, more hydrophobic ILs significantly enhance the partition of more hydrophobic biomolecules to the PEG-rich phase (where the IL is enriched). Furthermore, the intensity of the IL effect is more pronounced when using weak salting-out agents. A linear correlation between the biomolecules and the ILs partition coefficients, and with the biomolecules octanol-water partition coefficients, was found. In most ATPS formed by polymers and salts using ILs as adjuvants, the biomolecules partition is driven by the ILs partition and by the difference in hydrophobicity between the coexisting phases.

Glycine-betaine ionic liquid analogues as novel phase-forming components of aqueous biphasic systems

Given the biotechnology advances observed in recent years in terms of upstream, the development of effective downstream processes becomes mandatory to decrease the associated costs of biotechnological-based products. Although a large interest has been devoted to ionic-liquid-based aqueous biphasic systems (IL-based ABS) as tailored separation platforms, imidazolium-based ILs have been the preferred choice as phase-forming agents. To overcome some toxicity and biodegradability issues associated to imidazolium-based ILs, novel ABS composed of ILs analogues of glycine-betaine (AGB-ILs) are here proposed and investigated. Five AGB-ILs were synthesized, characterized in terms of ecotoxicity, and applied toward the development of novel ABS formed with Na₂ SO₄ . Three commercial ILs were also investigated for comparison purposes. The respective ABS ternary phase diagrams, as well as the tie-lines and tie-line lengths, were determined at 25°C. Finally, their performance as extraction strategies was evaluated with five amino acids (L-tryptophan, L-phenylalanine, D-phenylalanine, L-tyrosine and L-3,4-dihydroxyphenylalanine/L-dopa). In all studied systems amino acids preferentially migrate to the IL-rich phase, and with AGB-ILs, the amino acid extraction efficiencies to the IL-rich phase range between 65% and 100%, obtained in a single-step. Furthermore, the studied AGB-ILs display a higher ability to form ABS and to extract amino acids than ABS composed of more traditional and commercial ILs. In summary, novel ABS composed of AGB-ILs can be formed and used as separation routes of value-added compounds of biotechnological interest. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018 © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1205-1212, 2018.

Ionic-Liquid-Mediated Extraction and Separation Processes for Bioactive Compounds: Past, Present, and Future Trends

Ionic liquids (ILs) have been proposed as promising media for the extraction and separation of bioactive compounds from the most diverse origins. This critical review offers a compilation on the main results achieved by the use of ionic-liquid-based processes in the extraction and separation/purification of a large range of bioactive compounds (including small organic extractable compounds from biomass, lipids, and other hydrophobic compounds, proteins, amino acids, nucleic acids, and pharmaceuticals). ILs have been studied as solvents, cosolvents, cosurfactants, electrolytes, and adjuvants, as well as used in the creation of IL-supported materials for separation purposes. The IL-based processes hitherto reported, such as IL-based solid-liquid extractions, IL-based liquid-liquid extractions, IL-modified materials, and IL-based crystallization approaches, are here reviewed and compared in terms of extraction and separation performance. The key accomplishments and future challenges to the field are discussed, with particular emphasis on the major lacunas found within the IL community dedicated to separation processes and by suggesting some steps to overcome the current limitations.

Effective separation of aromatic and aliphatic amino acids mixtures using ionic-liquid-based aqueous biphasic systems

Based on the particular ability of aliphatic amino acids to form aqueous biphasic systems with ionic liquids, it is here shown how these systems can be used to selectively and efficiently separate mixtures of aliphatic and aromatic amino acids usually present in protein hydrolysates or fermentation media.