Mutagenicity and cytotoxicity assessment of biodegraded textile effluent by Ca-alginate encapsulated manganese peroxidase

Overexpression of cat2 restores antioxidant properties and production traits in degenerated strains of Volvariella volvacea

Strain degeneration is an important factor hindering the development of the edible fungus industry. Strain degeneration is associated with the excessive accumulation of reactive oxygen species (ROS) in vivo. Catalase (CAT), an important antioxidant enzyme, can promote the clearance of ROS. In this study, the cat2 gene of Volvariella volvacea was first cloned into an overexpression plasmid via homologous recombination. Finally, through Agrobacterium-mediated transformation, this plasmid was inserted into degenerated strains of V. volvacea T19. The physiological properties, antioxidant properties, ROS content, matrix degradation activity, and cultivation properties of the transformants were tested. The results showed that the cloned cat2 gene was 99.94% similar to the reference sequence. Screening revealed that six positive transformants were successfully obtained. After the overexpression of cat2, the growth rate and biomass of the mycelium increased significantly in the transformant strains (versus the V. volvacea T19 degenerated strains). Moreover, the accumulation of superoxide radical (O2•-) and hydrogen peroxide (H2O2) was significantly reduced, and the activity of the enzymes CAT, superoxide dismutase (SOD), glutathione reductase (GR), and glutathione peroxidase (GPX) was significantly increased. Meanwhile, the expression of cat2, Mnsod1, Mnsod2, gpx, and gr was significantly upregulated, and the activity of eight matrix degradation-related enzymes was increased to varying degrees. More importantly, the overexpression of the cat2 gene promoted the regrowth of fruiting bodies in degenerated strains of V. volvacea T19. This study provides a new biotechnological strategy to control the degeneration of V. volvacea and other edible fungi.

Display of Lignin Peroxidase on the Surface of Bacillus subtilis

Lignin peroxidase (LiP) has a good application prospect in lignin degradation, environmental treatment, straw feed, and other industries. However, its application is constrained by the high price and low stability of enzyme preparation. In this study, the Escherichia coli-Bacillus subtilis (E. coli-B. subtilis) shuttle expression vector pHS-cotG-lip was constructed and displayed on the surface of Bacillus subtilis spores. The analysis of enzymatic properties showed that the optimal catalytic temperature and pH of the immobilized LiP were 55 °C and 4.5, respectively. Compared with free LiP (42 °C and pH4.0), the optimal reaction temperature increased by 13 °C. After incubation at 70 °C for 1 h, its activity remained above 30%, while the free LiP completely lost its activity under the same conditions. Adding Mn2+, DL-lactic acid, and PEG-4000 increased the CotG-LiP enzyme activity to 313%, 146%, and 265%, respectively. The recyclability of spore display made the fusion protein CotG-LiP retain more than 50% enzyme activity after four cycles. The excellent recycling rate indicated that LiP displayed on the spore surface had a good application prospect in sewage treatment and other fields, and also provided a reference for the rapid and low-cost immobilized production of enzyme preparations.

Intermolecular interactions in mixed dye systems and the effects on dye wastewater treatment processes

Dye wastewater discharge is a critical concern across textiles, paper, cosmetics, and other industries. This study explores the impact of dye-dye interactions on chemical coagulation and ultrafiltration process. Using basic and reactive dyes, representing cationic and anionic compounds, the intricate interplay between these dyes was examined through spectroscopic analysis. Remarkably, interactions between dyes of opposite charges exhibited significant effects on both techniques. Electrostatic attractions played a key role. Positive coagulant hydrolysates selectively attracted negative dyes, while negatively charged membranes effectively captured positive dyes. Combining dyes with opposite charges resulted in enhanced removal efficiency, addressing challenging dyes collectively. This discovery offers a novel approach to improving dye removal, utilizing opposite-charged dye mixtures can tackle stubborn dyes unmanageable by conventional methods.

Immobilization of Horseradish Peroxidase on Ca Alginate-Starch Hybrid Support: Biocatalytic Properties and Application in Biodegradation of Phenol Red Dye

In this study, horseradish peroxidase was extracted, purified, and immobilized on a calcium alginate-starch hybrid support by covalent bonding and entrapment. The immobilized HRP was used for the biodegradation of phenol red dye. A 3.74-fold purification was observed after precipitation with ammonium sulfate and dialysis. An immobilization yield of 88.33%, efficiency of 56.89%, and activity recovery of 50.26% were found. The optimum pH and temperature values for immobilized and free HRP were 5.0 and 50 °C and 6.5 and 60 °C, respectively. The immobilized HRP showed better thermal stability than its free form, resulting in a considerable increase in half-life time (t1/2) and deactivation energy (Ed). The immobilized HRP maintained 93.71% of its initial activity after 45 days of storage at 4 °C. Regarding the biodegradation of phenol red, immobilized HRP resulted in 63.57% degradation after 90 min. After 10 cycles of reuse, the immobilized HRP was able to maintain 43.06% of its initial biodegradative capacity and 42.36% of its enzymatic activity. At the end of 15 application cycles, a biodegradation rate of 8.34% was observed. In conclusion, the results demonstrate that the immobilized HRP is a promising option for use as an industrial biocatalyst in various biotechnological applications.

Manganese peroxidases as robust biocatalytic tool - An overview of sources, immobilization, and biotechnological applications

With robust catalytic features, manganese peroxidases (MnPs) from various sources, including fungi and bacteria, have gained much consideration in many biotechnological applications with particular emphasis on environmental remediation. MnP is a heme-containing enzyme that belongs to the oxidoreductases that can catalyze the degradation of various organic pollutants, such as chlorophenols, nitroaromatic compounds, industrial dyes, and polycyclic aromatic hydrocarbons. To spotlight the MnP as biocatalytic tool, an effort has been put forward to cover the four major compartments. For instance, following a brief introduction, first, various microbial sources of MnP are discussed with examples. Second, structural attributes and biocatalytic features of MnP are given with examples. Third, different MnP immobilization strategies, including adsorption, covalent linking, entrapment, and cross-linking, are discussed with a significant motive to strengthen the enzyme's stability against diverse deactivation agents by restricting the conformational mobility of molecules. Compared to free counterparts, immobilized MnP fractions perform well in hostile environments. Finally, various biotechnological applications, such as fuel ethanol production, de-lignification, textile industry, pulp and paper industry, degradation of phenolic and non-phenolic compounds, and pharmaceutical and pesticide degradation, are briefly discussed.

Filamentous fungi for sustainable remediation of pharmaceutical compounds, heavy metal and oil hydrocarbons

This review presents a comprehensive summary of the latest research in the field of bioremediation with filamentous fungi. The main focus is on the issue of recent progress in remediation of pharmaceutical compounds, heavy metal treatment and oil hydrocarbons mycoremediation that are usually insufficiently represented in other reviews. It encompasses a variety of cellular mechanisms involved in bioremediation used by filamentous fungi, including bio-adsorption, bio-surfactant production, bio-mineralization, bio-precipitation, as well as extracellular and intracellular enzymatic processes. Processes for wastewater treatment accomplished through physical, biological, and chemical processes are briefly described. The species diversity of filamentous fungi used in pollutant removal, including widely studied species of Aspergillus, Penicillium, Fusarium, Verticillium, Phanerochaete and other species of Basidiomycota and Zygomycota are summarized. The removal efficiency of filamentous fungi and time of elimination of a wide variety of pollutant compounds and their easy handling make them excellent tools for the bioremediation of emerging contaminants. Various types of beneficial byproducts made by filamentous fungi, such as raw material for feed and food production, chitosan, ethanol, lignocellulolytic enzymes, organic acids, as well as nanoparticles, are discussed. Finally, challenges faced, future prospects, and how innovative technologies can be used to further exploit and enhance the abilities of fungi in wastewater remediation, are mentioned.

Biocatalytic degradation of reactive blue 221 and direct blue 297 dyes by horseradish peroxidase immobilized on iron oxide nanoparticles with improved kinetic and thermodynamic characteristics

In present study, we describe the biodegradation of direct blue (DB) 297 and reactive blue (RB) 221 by immobilizing horseradish peroxidase (HRP) isolated from fresh leaves of Moringa Oliefera on iron oxide nanoparticles. Iron oxide nanoparticles were synthesized by co-precipitation method and showed a maximum immobilization efficiency of 87%. The surface topography of iron oxide nanoparticles was envisaged by scanning electron microscopy (SEM), results showed that magnetic nanoparticles (MNPs) were in the form of aggregates having size of 1 μm. Furthermore, immobilization was confirmed via functional group identification performed by Fourier transformed infrared spectroscopy (FTIR). Immobilization phenomena displaced the optimum temperature from 35 °C to 50 °C moreover, pH optima were altered from 5.0 to 7.0. Vmax and Km for free and immobilized HRP, were 303 U/mg and 1.66 mM and 312 U/mg and 1.94 mM, respectively. Enzymatic thermodynamic measurements (ΔH*, ΔS*, Ea, ΔG*) were also evaluated for immobilized HRP and its free counterpart. Optimum degradation of reactive blue (RB) and direct blue (DB) 297 with free and immobilized HRP was observed at pH 5 and at temperature 40 °C respectively. The removal efficiency of DB 297 and RB 221 with free HRP was 75% and 86% while with immobilized HRP was 81% and 92% respectively. Furthermore, biodegradation of reactive blue (RB) 221 and direct blue (DB) 297 with immobilized and free biocatalyst was also investigated by Fourier transform infrared spectroscopy (FTIR) by identification of groups involved in dye degradation. FTIR results confirmed the 100% degradation of dyes. Immobilized HRP retained significant catalytic activity after five consecutive cycles of dye degradation. In conclusion, Fe3O4 nanoparticles are promising and environmentally friendly media for enzyme immobilization. Moreover, immobilized HRP showed more thermal stability, pH stability and higher dye degradation efficiency as compared to free HRP. Furthermore, the immobilized HRP, economically more convenient and easily removable from reaction media. Owing to its thermal stability, ease of separation from reaction media and reusability, the magnetically separatable immobilized HRP can be exploited successfully for treatment of dye contaminated textile effluents.

Emerging contaminants of high concern for the environment: Current trends and future research

Wastewater is contaminated water that must be treated before it may be transferred into other rivers and lakes in order to prevent further groundwater pollution. Over the last decade, research has been conducted on a wide variety of contaminants, but the emerging contaminants are those caused primarily by micropollutants, endocrine disruptors (EDs), pesticides, pharmaceuticals, hormones, and toxins, as well as industrially-related synthetic dyes and dye-containing hazardous pollutants. Most emerging pollutants did not have established guidelines, but even at low concentrations they could have harmful effects on humans and aquatic organisms. In order to combat the above ecological threats, huge efforts have been done with a view to boosting the effectiveness of remediation procedures or developing new techniques for the detection, quantification and efficiency of the samples. The increase of interest in biotechnology and environmental engineering gives an opportunity for the development of more innovative ways to water treatment remediation. The purpose of this article is to provide an overview of emerging sources of contaminants, detection technologies, and treatment strategies. The goal of this review is to evaluate adsorption as a method for treating emerging pollutants, as well as sophisticated and cost-effective approaches for treating emerging contaminants.

Decolourization of azo dye using a batch bioreactor by an indigenous bacterium Enterobacter aerogenes ES014 from the waste water dye effluent and toxicity analysis

Effluents of textile industries caused serious environmental problem throughout the world. In this study, a total of 23 bacterial strains from five bacterial species were isolated from the dye effluent. Of these strains, a unique and novel Enterobacter aerogenes ES014 was utilized for dye decolourization and toxicity analysis. The selected strain could effectively decolourize three selected azo dyes. It showed the capability for decolourizing acid orange (82.3 ± 3.6%), methyl orange (78.2 ± 3.3%), and congo red (81.5 ± 3.2%). The selected bacterial strain significantly decolourized 100 mg/L acid orange at 35 °C, pH 7.5 with 6% sodium chloride concentration. Most of the tested nitrogen and carbon sources effectively enhanced decolourization process. It showed the ability to decolourize acid orange in the culture medium containing 1.5% glucose (100 ± 2.8%) and 0.8% beef extract (100 ± 3.1%). A laboratory-scale batch bioreactor was used to decolourize azo dye at optimized culture conditions. The decolourizing ability improved with 100 mL/h hydraulic retention time. The treated wastewater quality was improved due to sharp depletion of Total Dissolved Solids (TDS), pH, Chemical Oxygen Demand (COD), alkalinity and sulphate concentration. The selected bacteria has the potential to produce dye degrading laccase. Laccase was detected during fermentation process in batch bioreactor as a key enzyme for decolourization produced by E. aerogenes ES014. Phytotoxicity and acute toxicity analysis were performed using Arachis hypogaea (pea nut) seed and first instar larvae of Artemia parthenogenetica (brine shrimp). The seed germination rate of treated wastewater was improved (94.3 ± 1.8%) and enhanced survival rate (91.7 ± 2.9%) in the first instar Artemia larvae treated with wastewater after 24 h. Overall, E. aerogenes ES014, might be a promising bacterial strain for the treatment of textile effluents with high azo dye concentrations.

Preparation and Characterization of Temperature/pH Dual-Responsive Gel Spheres for Immobilizing Nitro Bacteria

The temperature/pH dual-responsive gel spheres were prepared by orthogonal experiments and response surface methodology, and finally, the optimal synthesis conditions were obtained by a composite score, including swelling, mechanical properties, mass transfer properties, and so forth. The results showed that a sodium alginate concentration of 3% (w/v), CaCl₂ concentration of 2% (w/v), gelling time of 40 h, drop height of 14 cm, NaCl concentration of 0.6% (w/v), N-isopropylacrylamide concentration of 0.03% (w/v), and acrylic acid concentration of 4.06% (w/v) were optimal synthesis conditions. The environmental change tolerance experiments showed that the nitrogen removal of the dual-response nitrifying gel spheres was better than the domesticated sludge at low temperatures (4 °C) and in alkaline (pH 9 and 10) conditions. The as-obtained gel spheres can respond intelligently to the changes in ambient temperature and pH. It is hoped that this study will provide technical parameters for the development and application of microbial immobilization carriers.

Peroxidase enzymes as green catalysts for bioremediation and biotechnological applications: A review

The fast-growing consumer demand drives industrial process intensification, which subsequently creates a significant amount of waste. These products are discharged into the environment and can affect the quality of air, degrade water streams, and alter soil characteristics. Waste materials may contain polluting agents that are especially harmful to human health and the ecosystem, such as the synthetic dyes, phenolic agents, polycyclic aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, pesticides and drug substances. Peroxidases are a class oxidoreductases capable of performing a wide variety of oxidation reactions, ranging from reactions driven by radical mechanisms, to oxygen insertion into CH bonds, and two-electron substrate oxidation. This versatility in the mode of action presents peroxidases as an interesting alternative in cleaning the environment. Herein, an effort has been made to describe mechanisms governing biochemical process of peroxidase enzymes while referring to H₂O₂/substrate stoichiometry and metabolite products. Plant peroxidases including horseradish peroxidase (HRP), soybean peroxidase (SBP), turnip and bitter gourd peroxidases have revealed notable biocatalytic potentialities in the degradation of toxic products. On the other hand, an introduction on the role played by ligninolytic enzymes such as manganese peroxidase (MnP) and lignin peroxidase (LiP) in the valorization of lignocellulosic materials is addressed. Moreover, sensitivity and selectivity of peroxidase-based biosensors found use in the quantitation of constituents and the development of diagnostic kits. The general merits of peroxidases and some key prospective applications have been outlined as concluding remarks.

Sustainable remediation of hazardous environmental pollutants using biochar-based nanohybrid materials

Biochar is a well-known carbon material with diversified functionalities and excellent physicochemical characteristics with high wastewater treatment potential. This review aims to summarize recent advancements in the development of biochar and biochar-based nanohybrid materials as a potential tool for the removal of harmful organic compounds such as synthetic dyes/effluents. The formation of biochar using pyrolysis of renewable feedstocks and their applications in various industries are explained hereafter. The characteristics and construction of biochar-based hybrid materials are explained in detail. Diversity of feedstocks, including municipal wastes, industrial byproducts, agricultural, and forestry residues, endows different biochar types with a wide structural variety. The production of cost-effective biochar drives the interest in manipulating biochars and induces desire functionality using nanoscale reinforcements. Various types of biochars, such as magnetic biochar, layered nanomaterial coated biochar, nanometallic oxide composites, chemically and physically functionalized biochar, have been produced. With the aid of nanomaterial, hybrid biochar exhibits a high potential to remove toxic contaminants. Depending upon biochar type, dyes/effluents can be removed via different mechanisms, including the Fenton process, photocatalytic degradation, π-π interaction, electrostatic interaction, and physical adsorption. In conclusion, desired physicochemical features, and tunable surface properties of biochar present high potential material in removing organic dyes and other effluents. The blended biochar with different materials/nanomaterials endows broader development and multi-functional opportunities for treating dyes/effluents.

Enzyme-assisted bioremediation approach for synthetic dyes and polycyclic aromatic hydrocarbons degradation

Environmental protection from emerging pollutants has become a significant challenge for mankind as an increasing number of contaminants, including synthetic dyes and polycyclic aromatic hydrocarbons (PAHs), represent a serious risk to ecological and environmental balance. Most synthetic dyes have complex aromatic structures and are resistant to degrade by classical approaches, such as physical and chemical processes, including adsorption, chemical coagulation, flocculation, ion exchange, membrane separation, froth flotation, and reverse osmosis. Enzymes-assisted catalytic transformation of pollutants has become a potential alternative to classical methods because of their ability to react with complex compounds, a quick degradation rate, and producing less harmful by-products. Plant peroxidases, and microbial laccase and lignin-degrading peroxidases (manganese and lignin peroxidase) have gained significant attention for treating aromatic waste due to their capability of oxidizing and detoxifying a wide range of recalcitrant xenobiotics, including PAHs and synthetic dyes. Peroxidases being efficient biocatalysts detoxify an array of toxic compounds by simple free-radical mechanism resulting in the formation of oxidized and depolymerized products of significantly reduced toxicity. Moreover, it is an ecofriendly and economically favorable approach towards the biodegradation of recalcitrant and toxic industrial waste. Among microbial and plant peroxidases, bacterial enzymes have broad substrate specificity and can transform a wide range of recalcitrant substrates. Ligninolytic enzymes oxidize the aromatic ring into quinones and acids by producing free hydroxyl radicals instead of dihydrodiols and mineralize aromatic hydrocarbon in combination with cytochrome P450, monooxygenases, and epoxide hydrolases. In the review, an attempt has been made to provide detailed knowledge about the availability of inexpensive peroxidases sources, their mechanism of action, and degradation potential. The present review summarizes the exploitation of peroxidases from plants, bacteria, and fungus (manganese peroxidase, lignin peroxidase, and laccases) for detoxification and degradation of textile dyes as well as PAHs. Conclusively, peroxidases have great potential to react with almost all classes of synthetic dyes and most PAHs due to broad substrate specificity and transformed them into less harmful metabolites.

Characterization and application of biochar-immobilized crude horseradish peroxidase for removal of phenol from water

Biochar (BC) has attracted much attention as an environmentally friendly material for application in wastewater treatment. In this study, a suitability of wood-derived BC as a support for covalent immobilization of horseradish peroxidase (HRP) across glutaraldehide as crosslinker, known for the capability to remove phenol from water, was investigated. The efficiency of the immobilized HRP in removal of phenol (2 mM) from water at different reaction conditions (varying dosages of polyethylene glycol (PEG300) 0-750 mg/L; H₂O₂ 1.5-3.5 mM, as well as reaction time 5-120 min) and the general toxicity of bio-treated water (Allium cepa test) were measured. All analyzes were performed for free enzyme as well. The immobilized enzyme showed the highest activity at temperature 30 °C and pH 7.0. The greatest efficiency of immobilized enzyme in phenol removing (90 %) was obtained by applying 2.5 mM H₂O₂ and 1.5 mg/L of PEG300 at pH 7.0 after 2 h of reaction period. After 4 washings, immobilized HRP retained more than 79 % activity with phenol removal of 64 %. Utilizing immobilized enzyme significantly reduces the toxicity of the tested water (80 %), which further suggested that it might be considered as an environmentally acceptable process for wastewater treatment. Possible degradation products remained in treated water were analyzed in water samples by liquid and gas chromatography with mass spectrometry, including also analysis of volatiles by solid phase microextraction technique; different phenol-base compounds were detected.

Evaluation of crude oil biodegradation using mixed fungal cultures

The use of potent fungal mixed cultures is a promising technique for the biodegradation of crude oil. Four isolates of fungi, namely, Alternaria alternata (AA-1), Aspergillus flavus (AF-3), Aspergillus terreus (AT-7), and Trichoderma harzianum (TH-5), were isolated from date palm soil in Saudi Arabia. The mixed fungal of the four isolates have a powerful tool for biodegradation up to 73.6% of crude oil (1%, w/v) in 14 days. The fungal consortium no. 15 containing the four isolates (1:1:1:1) performed significantly better as a biodegradation agent than other consortium in a variety of environmental factors containing crude oil concentration, incubation temperature, initial pH, biodegradation time and the salinity of the medium. The fungal consortium showed better performance in the biodegradation of normal alkanes (n-alkanes) than that of the polycyclic aromatic hydrocarbons (PAHs); the biodegradation efficiency of normal alkanes of the fungal consortium (67.1%) was clearly high than that of the PAHs (56.8%).

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Evaluation of a Trametes pubescens laccase concentrated extract on allura red AC decolorization without the addition of synthetic mediators

Synthetic dye bioremediation is a topic of great importance since these pollutants possess toxic effects, and huge quantities of them are being discharged into water bodies. Ligninolytic enzyme treatment stands out for being a cost-effective methodology, capable of obtaining high decolorization levels. In this work, a laccase enzyme treatment was evaluated to effectively perform a cycle of dye bioremediation. Furthermore, a dye decolorization improvement was also assessed through laccase immobilization. Particularly, a Trametes pubescens enzyme extract was concentrated, immobilized onto calcium alginate beads, and characterized to assess its dye decolorization potential. Ammonium sulfate precipitation and vacuum evaporation were evaluated to concentrate the crude extract and to decolorize allura red AC. Both treatments reached a high enzyme yield recovery (>90%), but only the vacuum-evaporated extract achieved a high allura red AC decolorization level after 16 h of contact time. This suggested that essential compounds for allura red AC decolorization were present in the crude extract, implying that neither a complete laccase purification process nor an addition of synthetic mediators are necessary. Under optimized immobilization conditions, 94.6% immobilization efficiency and 49.8% activity recovery were obtained with 0:1 alginate:enzyme (v/v), 100 mM CaCl₂, and 5.0% w/v sodium alginate. Furthermore, by immobilizing the laccase concentrated extract, both the pH and temperature stabilities were improved. The decolorization of allura red AC by free and immobilized laccase was 68.4% and 4.6%, respectively, showing that although the enzyme stability was improved, dye decolorization was negatively affected. Thus, an efficient allura red AC decolorization was obtained with concentrated-free laccase by a feasible and low-cost methodology.

Bio-based and cost effective method for phenolic compounds removal using cross-linked enzyme aggregates

This work aimed at presenting a green method using a new source of peroxidase isolated from Raphanus sativus var. niger (RSVNP) in immobilized form, for the treatment of wastewater. To ensure stability and enzymatic activity in the biodegradation process, RSVNP was immobilized as a cross-linked enzyme aggregate (CLEAs). With more than 29% of recovered activity and 85% aggregation yield, acetone was selected as the best precipitating agent. The formed protein aggregates required 2% (v/v) of glutaraldehyde (GA) concentration and a ratio of 9:1 (v/v) enzyme (E) amount to cross-linker (E/GA). Compared to the free enzyme, RSVNP-CLEAs were found more chemically and thermally stable and exhibited good storage stability for more than 8 weeks. In addition, RSVNP-CLEAs were evaluated for their ability to remove phenol and p-cresol from aqueous solution by varying several operating conditions. A maximal yield (98%) of p-cresol conversion was recorded after 40 min; while 92% of phenol was degraded after 1 h duration time. The reusability of RSVNP-CLEAs was tested, displaying 71% degradation of phenol in the third batch carried out and more than 54% was achieved for p-cresol after four successive reuses in the presence of hydrogen peroxide at 2 mM concentration.

Nanostructured materials for harnessing the power of horseradish peroxidase for tailored environmental applications

High catalytic efficiency, stereoselectivity, and sustainability outcomes of enzymes entice chemists for considering biocatalytic transformations to supplant conventional synthetic routes. As a green and versatile enzyme, horseradish peroxidase (HRP)-based enzymatic catalysis has been widely employed in a range of biological and chemical transformation processes. Nevertheless, like many other enzymes, HRP is likely to denature or destabilize in harsh realistic conditions due to its intrinsic fragile nature, which results in inevitably shortened lifespan and immensely high bioprocess cost. Enzyme immobilization has proven as a prospective strategy for improving their biocatalytic performance in continuous industrial processes. Nanostructured materials with huge accessible surface area, abundant porous structures, exceptional functionalities, and high chemical and mechanical stability have recently garnered intriguing research interests as novel kinds of supporting matrices for HRP immobilization. Many reported immobilized biocatalytic systems have demonstrated high catalytic performances than that to the free form of enzymes, such as enhanced enzyme efficiency, selectivity, stability, and repeatability due to the protective microenvironments provided by nanostructures. This review delineates an updated overview of HRP immobilization using an array of nanostructured materials. Furthermore, the general physicochemical aspects, improved catalytic attributes, and the robust practical implementations of engineered HRP-based catalytic cues are also discussed with suitable examples. To end, concluding remarks, challenges, and worthy suggestions/perspectives for future enzyme immobilization are also given.

Improved performance of immobilized laccase on Fe3O4@C-Cu2+ nanoparticles and its application for biodegradation of dyes

An effective strategy for enhancement of catalytic activity and stability of immobilized laccase via metal affinity adsorption on Fe₃O₄@C-Cu²⁺ nanoparticles was developed, which involved the fabrication of hydroxyl and carboxyl functionalized Fe₃O₄@C nanoparticles via a simple hydrothermal process and the subsequent chelation with Cu²⁺ for the immobilization of laccase under a mild condition. Our results revealed that the Fe₃O₄@C-Cu²⁺ nanoparticles possess a high loading amount of bovine serum albumin (BSA, 436 mg/g support) and laccase activity recovery of 82.3 % after immobilization. Laccase activity assays indicated that thermal and pH stabilities, and resistances to organic solvents and metal ions of the immobilized laccase were relatively higher than those of the free enzyme. The immobilized laccase maintained more than 61 % of its original activity after 10 consecutive reuses. Most importantly, the immobilized laccase possessed excellent degradation of diverse synthetic dyes. The degradation rates of malachite green (MG), brilliant green (BG), crystal violet (CV), azophloxine, Procion red MX-5B, and reactive blue 19 (RB19) was approximately 99, 93, 79, 88, 75 and 81 (%) in the first cycle. Even after 10 consecutive reuses, the removal efficiencies of the six dyes were found to be 94, 80, 71, 78, 60, and 65 (%), respectively.

Decolourization and biodegradation of azo dye methyl red by Rhodococcus strain UCC 0016

In the present study, locally isolated Rhodococcus strains were attempted as biological tools for methyl red removal, a mutagenic azo dye posing threat to the environment if left untreated. Rhodococcus strain UCC 0016 demonstrated superior methyl red-decolourizing activity of 100% after 24 h at static condition in comparison to Rhodococcus strain UCC 0008 which recorded 65% decolourization after 72 h. Optimization of physicochemical parameters at 30°C, pH 7 and supplementing glucose as the carbon source resulted in improved methyl red-decolourizing activity at static condition and reduced the time taken to achieve complete decolourization by 80%. Higher concentration of methyl red (5 g/L) was able to be decolourized completely within 10 h by adopting the technology of immobilization. The encapsulated cells of Rhodococcus strain UCC 0016 demonstrated higher substrate affinity (K_m = 0.6995 g/L) and an accelerated rate of disappearance of methyl red (V_max = 0.3203 g/L/h) compared to the free cells. Furthermore, the gellan gum beads could be reused up to nine batches without substantial loss in the catalytic activity indicating the economic importance of this protocol. Analysis of methyl red degradation products revealed no germination inhibition on Triticum aestivum and Vigna radiata demonstrating complete toxicity removal of the parent dye after biological treatment. The occurrence of new and altered peaks (UV-Vis and FTIR) further supported the notion that the removal of methyl red by Rhodococcus strain UCC 0016 was indeed through biodegradation. Therefore, this strain has a huge potential as a candidate for efficient bioremediation of wastewater containing methyl red.

Mutagenicity, genotoxicity and oxidative stress induced by pesticide industry wastewater using bacterial and plant bioassays

Atomic absorption spectrophotometer and gas chromatography analysis revealed the presence of heavy metals, organochlorine and organophosphate pesticides in industrial wastewater. XAD, Dichloromethane and n-Hexane extracted wastewater were analysed for genotoxic potential using Ames Salmonella/mammalian microsome test. The XAD concentrated sample displayed remarkable mutagenic activity compared to solvent assisted liquid-liquid extraction. Strain TA98 was found utmost sensitive towards all extracts. Wastewater induced chromosomal aberrations in roots of Allium cepa showed significant (p < 0.05) decrease in mitotic index. Seeds of Vigna radiata germinated on soft agar plates treated with different concentration of wastewater showed significant reduction in germination (52 %), seedling vigor index (76 %), radicle length (56 %), plumule length (47 %), biomass of radicle (64 %) and plumule (57%) at highest wastewater concentration. Propidium iodide stained V. radiata roots showed oxidative stress induced by wastewater under CLS microscopy. Further, genotoxicity of wastewater was confirmed by plasmid nicking assay using pBR322 plasmid.

Simultaneous Removal and Recovery of Metal Ions and Dyes from Wastewater through Montmorillonite Clay Mineral

The main objective of this work was to evaluate the potential of Montmorillonite nanoclay (Mt), readily and inexpensively available, for the simultaneous adsorption (and removal) of two classes of pollutants: metal ions and dyes. The attention was focused on two "model" pollutants: Ce(III) and crystal violet (CV). The choice is due to the fact that they are widespread in wastewaters of various origins. These characteristics, together with their effect on human health, make them ideal for studies on water remediation. Moreover, when separated from wastewater, they can be recycled individually in industrial production with no or simple treatment. Clay/pollutant hybrids were prepared under different pH conditions and characterized through the construction of the adsorption isotherms and powder X-ray diffraction. The adsorption behavior of the two contaminants was revealed to be significantly different: the Langmuir model reproduces the adsorption isotherm of Ce(III) better, thus indicating that the clay offers a unique adsorption site to the metal ions, while the Freundlich model proved to be the most reliable for the uptake of CV which implies heterogeneity of adsorption sites. Moreover, metal ions do not adsorb at all under acidic conditions, whereas the dye is able to adsorb under all the investigated conditions. The possibility to modulate the adsorption features by simply changing the pH conditions was successfully employed to develop an efficient protocol for the removal and separation of the different components from aqueous solutions mimicking wastewaters.

Naturally-derived biopolymers: Potential platforms for enzyme immobilization

Naturally-derived biopolymers such as alginate, chitosan, cellulose, agarose, guar gum/guaran, agar, carrageenan, gelatin, dextran, xanthan, and pectins, etc. have appealed significant attention over the past several years owing to their natural abundance and availability all over the years, around the globe. In addition, their versatile properties such as non-toxicity, biocompatibility, biodegradability, flexibility, renewability, and the availability of numerous reactive sites offer significant functionalities with multipurpose applications. At present, intensive research efforts have been focused on engineering enzymes using natural biopolymers as novel support/composite materials for diverse applications in biomedical, environmental, pharmaceutical, food and biofuel/energy sectors. Immobilization appears as a straightforward and promising approach to developing biocatalysts with improved catalytic properties as compared to their free counterparts. Biopolymers-assisted enzymes are more stable, robust, and recoverable than that of free forms, and can be employed for continuous biocatalytic reactions. The present review highlights the recent developments and use of biopolymers and their advanced composites as support carriers for the immobilization of a variety of different enzymes to develop biocatalysts with desired catalytic activity and stability characteristics for emerging applications.

Reactive Black 5 Degradation on Manganese Oxides Supported on Sodium Hydroxide Modified Graphene Oxide

Sodium hydroxide-modified graphene oxide was used as manganese oxides support for the preparation of nanocomposites via a one-pot preparation route for the degradation of Reactive Black 5. The nanocomposites were characterized for their structure by X-ray diffraction, for their textural properties by Nitrogen adsorption, and for their surface chemistry by Fourier transform infrared spectroscopy, potentiometric titration, and thermal analysis measurements. The nanocomposites prepared showed to possess high activity for the degradation/oxidation of Reactive Black 5 at ambient conditions, without light irradiation, which was higher than that of the precursors manganese oxides and can be attributed to the synergistic effect of the manganese oxides and the modified graphene oxide.

UV/H2O2/Ferrioxalate Based Integrated Approach to Decolorize and Mineralize Reactive Blue Dye: Optimization Through Response Surface Methodology

The decolorization and mineralization of Reactive Blue 222 dye was studied using UV/H2O2/ferrioxalate approach in combination with Pleorotus ostreatus. The dye was decolorized by UV/H2O2/ferrioxalate based advanced oxidation process (AOP) at different levels of process variables dye concentration, catalyst dose, pH, reaction time and resultantly, 80% decolorization was achieved. Pleorotus ostreatus treatment enhanced the dye degradation up to 92% at optimum levels of pH, temperature, inoculum size, carbon and nitrogen sources at specific concentration. Response Surface Methodology (RSM) was employed for optimization under face-centered central composite design (CCD). Although both treatments were found efficient for the removal of dye, but on applying the integrated approach, 96% dye removal was obtained which led to complete degradation of the dye. FTIR analysis confirmed the degradation of dye into low mass compounds. The water quality assurance parameters were measured to assess the mineralization efficiency. A significant reduction in COD (94%) and TOC (92%) were found when dye was degraded integrated approach. A phytotoxicity analysis on Pisum sativum plant revealed the non-toxic behavior of metabolites produced. Results revealed that the integrated approach is highly promising for the decolorization and mineralization of the Reactive Blue 222 dye and is also extendable to treat the dye in textile wastewater.

Kinetics and Equilibrium Studies of Eriobotrya Japonica: A Novel Adsorbent Preparation for Dyes Sequestration

Present study deals with use of agricultural based waste material Loquat (Eriobotrya japonica) seeds for removal of toxic Acid orange 7 (AO7) dye from aqueous streams. Batch mode experiments were conducted as function of pH, initial dye concentration, contact time and dosage of adsorbent. Biomass was used in native, pretreated and immobilized forms. Maximum removal was observed at pH 2. Desorption studies were done in order to determine degree of stability and regeneration of immobilized biomass. For equilibrium studies, Langmuir and Freundlich models were applied. Pseudo 1st & 2nd order models were applied on experimental data for reaction kinetics evaluation. Pseudo 2nd order model was best fit for present experiments. Biomass characterization was done by scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) and Fourier Transform Infrared (FTIR) techniques for elucidation of biomass constituents and surface morphology before and after dye loading. It was observed that loquat seeds may be potential adsorbent for removal of toxic dyes from wastewater.

Lead Remediation Using Smart Materials. A Review

The nanoparticles have been prepared and employed as excellent adsorbents for the sequestration of heavy metal ions and hazardous impurities from the aqueous media. The surface morphological, textural and structural properties of nanoparticles have been modified, which are capable and potentially useful for the remediation of metal ions. Several metals (oxides, doped, nanocomposites of Fe, Ti, Zn, SiO2, SiC, Mo, Co, Ni, Zr, Mn, Si, S, Al, Cu, Ce, graphene, CNTs) were reported an efficient adsorbents for the removal of lead (Pb) ions from aqueous media and polluted water. The present review focuses on different kinds of nanoparticles such as metal oxides, carbon based and host supported employed for removal of Pb ions under varying experimental conditions such as pH, temperature, contact time and concentrations. The preparation strategies, physicochemical properties and adsorption are also discussed. Based on studies, it was found that the smart materials are affective adsorbents for the purification of wastewater containing Pb ions and could possibly extended for the remediation of other heavy metal ions.

Biosorption of reactive yellow dye by malt bagasse

This research evaluated the biosorption potential of the 134% Yellow Reafix BR2 dye by the malt bagasse. Tests were conducted at batch conditions, under controlled agitation, pH, and temperature. The biosorbent was characterized through scanning electron microscopy and Fourier transform infrared spectroscopy, before and after biosorption. Malt bagasse presented a point of zero charge at 6.75. In the process variables evaluation, there was a greater biosorption potential in acidic pH, without a significant influence of size on the biosorbent particles. The equilibrium time was achieved in 360 min, with approximately 93% removal at the evaluated temperatures. The experimental data were best represented by the pseudo-second-order model. Biosorption was characterized as spontaneous and endothermic, with indicative of physical. Considering the equilibrium, the Langmuir isotherm was the one that best fit the experimental data, with a maximum biosorption capacity of 68.75 mg g–1 (at 303 K and pH 2). The removal suffered no significant interference with the presence of another dye nor with the increase of ionic strength. Thus, the malt bagasse shows potential to be used as a biosorbent in treatment systems of industrial effluents.

Environmentally-related contaminants of high concern: Potential sources and analytical modalities for detection, quantification, and treatment

In recent years, emerging contaminants (ECs) of high concern are broadly distributed throughout the environmental matrices because of various industrial practices and anthropogenic inputs, i.e., human-made activities. With ever increasing scientific knowledge, technological advancement, socio-economic awareness, people are now more concern about the widespread distribution of environmentally related ECs of high concern. As, ECs possess serious ecological threats and potential risks to human health and aquatic life, even at minor concentrations. The controlled or uncontrolled discharge and long-term persistence of ECs that includes micro-pollutants, endocrine disruptors (EDs), pesticides, pharmaceuticals, hormones, toxins, and industrially-related synthetic dyes and dyes-containing hazardous pollutants, etc. pose a significant challenge to policy regulators, engineers, and scientific community. The conventional treatment technologies are proved ineffective for the complete elimination and removal of an array of contaminants of emerging environmental concern in various biological and environmental samples. In order to overcome the aforementioned ecological threats, tremendous research efforts have been made to boost the efficiency of remediation techniques or develop new modalities to detect, quantify and treat the samples efficiently. The boom in biotechnology and environmental engineering offers potential opportunities to develop advanced and innovative remediation techniques in the field of water treatment. This review discusses the environmental and health hazards associated with a widespread distribution of micro-pollutants, pesticides, pharmaceuticals, hormones, and industrially-related synthetic dyes and dyes-containing hazardous pollutants, etc. in the water bodies, i.e., surface water, groundwater, and industrial wastewater streams. Life-cycle distribution of emerging (micro)-pollutants with suitable examples from various industrial sources viewpoints is also discussed. The later part of the review focuses on innovative and cost-effective remediation (removal) approaches from phase-changing treatment technologies for these ECs of high concern.

"Smart" chemistry and its application in peroxidase immobilization using different support materials

In the past few decades, the enzyme immobilization technology has been exploited a lot and thus became a matter of rational design. Immobilization is an alternative approach to bio-catalysis with the added benefits, adaptability to automation and high-throughput applications. Immobilization-based approaches represent simple but effective routes for engineering enzyme catalysts with higher activities than wild-type or pristine counterparts. From the chemistry viewpoint, the concept of stabilization via manipulation of functional entities, the enzyme surfaces have been an important driving force for immobilizing purposes. In addition, the unique physiochemical and structural functionalities of pristine or engineered cues, or insoluble support matrices (carrier) such as mean particle diameter, swelling behavior, mechanical strength, and compression behavior are of supreme interest and importance for the performance of the immobilized systems. Immobilization of peroxidases into/onto insoluble support matrices is advantageous for practical applications due to convenience in handling, ease separation of enzymes from a reaction mixture and the reusability. A plethora of literature is available explaining individual immobilization system. However, current literature lacks the chemistry viewpoint of immobilization. This review work presents state-of-the-art "Smart" chemistry of immobilization and novel potentialities of several materials-based cues with different geometries including microspheres, hydrogels and polymeric membranes, nanoparticles, nanofibers, composite and hybrid or blended support materials. The involvement of various functional groups including amino, thiol, carboxylic, hydroxyl, and epoxy groups via "click" chemistry, amine chemistry, thiol chemistry, carboxyl chemistry, and epoxy chemistry over the protein surfaces is discussed.

Quick separation and enzymatic performance improvement of lipase by ionic liquid-modified Fe3O4 carrier immobilization

To promote the activity and stability of immobilized porcine pancreatic lipase (PPL), novel carrier was combined with special immobilization method. Enzymatic activity was enhanced after immobilized onto ionic liquid modified magnetic Fe₃O₄ by electrostatic adsorption. Activity of immobilized enzyme (PPL-IM/BF₄-Fe₃O₄@CA) reached 596 U/g PPL. Through the combination of electrostatic adsorption and embedding immobilization methods, we improve binding force between the carrier and enzyme, and further enhance the efficiency and stability of immobilized enzyme. The activity of PPL-IM/BF₄-Fe₃O₄@CA after repeated third use was 78%. After storage at room temperature for 5 days, the residual activity was 89%. Enzymatic properties and catalytic kinetics of immobilized enzymes were studied, and the effect mechanism of ionic liquid modified Fe₃O₄ on PPL was revealed. The effect of ionic liquid on the carrier structure was investigated by characterization of XRD, FT-IR, SEM and TG. The mechanism and enzymatic properties of immobilized PPL via electrostatic adsorption and embedding were analyzed. A novel and efficient immobilized PPL was developed.

Mutagenicity, cytotoxic and antioxidant activities of Ricinus communis different parts

Ricinus communis (castor plant) is a potent medicinal plant, which is commonly used in the treatment of various ailments. The present study was conducted to appraise the cytotoxicity and mutagenicity of R. communis along with antioxidant and antimicrobial activities. Cytotoxicity was evaluated by hemolytic and brine shrimp assays, whereas Ames test (TA98 and TA100) was used for mutagenicity evaluation. Plant different parts were extracted in methanol by shaking, sonication and Soxhlet extraction methods. The R. communis methanolic extracts showed promising antioxidant activity evaluated as through total phenolic contents (TPC), total flavonoid content (TFC), DPPH free radical inhibition, reducing power and inhibition of linoleic acid oxidation. R. communis seeds, stem, leaves, fruit and root methanolic extracts showed mild to moderate cytotoxicity against red blood cells (RBCs) of human and bovine. Brine shrimp lethality also revealed the cytotoxic nature of extracts with LC50 in the range of 0.22-3.70 (µg/mL) (shaking), 1.59-60.92 (µg/mL) (sonication) and 0.72-33.60 (µg/mL) (Soxhlet), whereas LC90 values were in the range of 345.42-1695.81, 660.50-14,794.40 and 641.62-15,047.80 µg/mL for shaking, sonication and Soxhlet extraction methods, respectively. R. communis methanolic extracts revealed mild mutagenicity against TA98 (range 1975 ± 67 to 2628 ± 79 revertant colonies) and TA100 (range 2773 ± 92 to 3461 ± 147 revertant colonies) strains and these values were 3267 ± 278 and 4720 ± 346 revertant colonies in case of TA98 and TA100 positive controls, respectively. R. communis methanolic extracts prevented the H2O2 and UV to Plasmid pBR322 DNA oxidative damage. Results revealed that R. communis is a potential source of bioactive compounds and in future studies the bioactive compounds will be identified by advanced spectroscopic techniques.