Measurement of bubble size distribution in activated sludge bubble column bioreactor

Design parameters comparison of bubble column, airlift and stirred tank photobioreactors for microalgae production

Microalgae are the most propitious feedstock for biofuel production due to their lipid and fatty acid content. Microalgae cultivation shares many features with bioreactors, such as thermal and pH regulation, feeding procedures, and mixing to enhance heat and mass transfers. Aeration and stirring speeds are important parameters to reduce the costs of producing microalgae. In this study, three different photobioreactor types (stirred tank, airlift, bubble column) were characterized and compared for microalgae production. Hydrodynamics, mass transfer, and power consumption were determined for various aeration rates (0.9, 1.2, 1.5 L/min), and stirring speeds (100, 200 rpm), and Chlorella sorokiniana growth performance was compared under the conditions that provided the highest volumetric mass transfer and the lowest mixing time. Photo-bioreactor homogenization was good as indicated by low mixing times (< 10 s). Bubble column had the highest volumetric mass transfer due to its sparger design. Gas holdup and volumetric mass transfer coefficient were found to increase with the air flow rate and stirring speed. For stirred tank, bubble column, and airlift photobioreactors, maximum specific growth rates of C. sorokiniana were 0.053, 0.061, 0.057 h-1, and biomass productivities were 0.064, 0.097, 0.072 gdw/L.day, respectively. Under the conditions tested, growth was limited by the volumetric mass transfer in the airlift and stirred tank and bubble column was the best option for producing microalgae. These findings pave way for more extensive use of these systems in producing microalgae and provide a basis to compare photobioreactors of different designs.

Nanobubble Technologies Offer Opportunities To Improve Water Treatment

Since first hypothesizing the existence of nanobubbles (NBs) in 1994, the empirical study of NB properties and commercialization of NB generators have rapidly evolved. NBs are stable spherical packages of gas within liquid and are operationally defined as having diameters less than 1000 nm, though they are typically in the range of 100 nm in one dimension. While theories still lack the ability to explain empirical evidence for formation of stable NBs in water, numerous NB applications have emerged in different fields, including water and wastewater purification where NBs offer the potential to replace or improve efficiency of current treatment processes. The United Nations identifies access to safe drinking water as a human right, and municipal and industrial wastewaters require purification before they enter water bodies. These protections require treatment technologies to remove naturally occurring (e.g., arsenic, chromium, fluoride, manganese, radionuclides, salts, selenium, natural organic matter, algal toxins), or anthropogenic (e.g., nitrate, phosphate, solvents, fuel additives, pharmaceuticals) chemicals and particles (e.g., virus, bacteria, oocysts, clays) that cause toxicity or aesthetic problems to make rivers, lakes, seawater, groundwater, or wastewater suitable for beneficial use or reuse in complex and evolving urban and rural water systems. NBs raise opportunities to improve current or enable new technologies for producing fewer byproducts and achieving safer water. This account explores the potential to exploit the unique properties of NBs for improving water treatment by answering key questions and proposing research opportunities regarding (1) observational versus theoretical existence of NBs, (2) ability of NBs to improve gas transfer into water or influence gas trapped on particle surfaces, (3) ability to produce quasi-stable reactive oxygen species (ROS) on the surface of NBs to oxidize pollutants and pathogens in water, (4) ability to improve particle aggregation through intraparticle NB bridging, and (5) ability to mitigate fouling on surfaces. We conclude with key insights and knowledge gaps requiring research to advance the use of NBs for water purification. Among the highest priorities is to develop techniques that measure NB size and surface properties in complex drinking and wastewater chemistries, which contain salts, organics, and a wide variety of inorganic and organic colloids. In the authors' opinion, ROS production by NB may hold the greatest promise for usage in water treatment because it allows movement away from chemical-based oxidants (chlorine, ozone) that are costly, dangerous to handle, and produce harmful byproducts while helping achieve important treatment goals (e.g., destruction of organic pollutants, pathogens, biofilms). Because of the low chemical requirements to form NBs, NB technologies could be distributed throughout rapidly changing and increasingly decentralized water treatment systems in both developed and developing countries.