The mechanism of biological phosphorus removal under anoxic-aerobic alternation condition with starch as sole carbon source and its biochemical pathway

Sustainable adsorbent frameworks based on bio-resourced materials and biodegradable polymers in selective phosphate removal for waste-water remediation

Phosphorus to an optimum extent is an essential nutrient for all living organisms and its scarcity may cause food security, and environmental preservation issues vis-à-vis agroeconomic hurdles. Undesirably excess phosphorus intensifies the eutrophication problem in non-marine water bodies and disrupts the natural nutrient balance of the ecosystem. To overcome such dichotomy, biodegradable polymer-based adsorbents have emerged as a cost-effective and implementable approach in striking a "desired optimum-undesired excess" balance pertaining to phosphate in a sustainable manner. So far, the reports on adopting such adsorbent-approach for wastewater remediation remained largely scattered, unstructured, and poorly correlated. In this background, the contextual review comprehensively discusses the current state-of-the-art in utilizing biodegradable polymeric frameworks as an adsorbent system for phosphate removal and its efficient recovery from the aquatic ecosystem, while highlighting their characteristics-specific functional efficiency vis-à-vis easiness of synthetic and commercial viability. The overview further delves into the sources and environmental ramifications of excessive phosphorus in water bodies and associated mechanistic pathways of phosphorus removal via adsorption, precipitation, and membrane filtration enabled by biodegradable (natural and synthetic) polymeric substrates. Finally, functionality optimization, degradability tuning, and adsorption selectivity of biodegradable polymers are highlighted, while aiming to strike a balance in "removal-recovery-reuse" dynamics of phosphate. Thus, the current review not only paves the way for future exploration of biodegradable polymers in sustainable cost-effective adsorbents for phosphorus removal but also can serve as a guide for researchers dealing with this critical issue.

Biomineralization and AHLs-guided quorum sensing enhanced phosphorus recovery in the alternating aerobic/anaerobic biofilm system under metal ion stress

The alternating aerobic/anaerobic biofilm system had been applied for phosphorus (P) enrichment and recovery because of the advantage of low energy consumption and high efficiency. The metal ions and N-acyl-L-homoserine lactones (AHLs) in system were studied to better clarify the mechanism of P uptake/release under metal ion stress. The results indicated that the increase of metal ions stimulated the release of AHLs, and AHLs-guided quorum sensing (QS) enhanced P uptake. Moreover, biomineralization could stimulate the increase of P content in biofilm (P_biofilm). Meanwhile, some ortho-p was converted to short-chain poly-p in extracellular polymer substance (EPS), and others were transferred into cell through EPS to synthesize poly-p. With the P_biofilm increased, more P could be absorbed/released due to the shift in the metabolic model of polyphosphate accumulating organisms (PAOs). The release of AHLs between microorganisms was also inhibited when PAOs reached the state of P saturation (75.6 ± 2.5 mg/g SS), which meant that the effect of signaling function would tend to stabilize, and the 169.2 ± 2.6 mg/L P concentration in the enriched solution was obtained due to the P release was inhibited. Moreover, P was rapidly transferred to the new enriched solution after the P was recovered, and PAOs restored its capability of P uptake/release. In addition, ³¹P-NMR analysis demonstrated that EPS played a major role in PAOs compared to cell, and inorganic phosphorus (IP) played an essential role in the uptake/release of P compared to organic phosphorus (OP). Furthermore, the microbiological analysis showed that Candidatus Accumulibacter was positively correlated with AHLs (P < 0.05). This study provided essential support for clarifying the P metabolism mechanism of PAOs.

Lutein production by microalgae using corn starch wastewater pretreated with rapid enzymatic hydrolysis

The main purpose of this study was to explore the pretreatment process of corn starch wastewater (CSW) and engineered microalgae cultivation strategy to improve the nutrient recovery from wastewater and the yield of microalgae lutein. One-stage enzymatic hydrolysis utilizing α-amylase and glucoamylase simultaneously was established to efficiently harvest a maximum concentration of reducing sugar content of 7.26 g/L from CSW in 50 min. Lutein yield of 10.96 mg/L was obtained under 24 h continuous illumination with 2200 Lux light intensity. Furthermore, a cyclic feeding cultivation strategy was developed to improve lutein accumulation and COD removal up to 25.9 mg/L and 50.7%, respectively, after three cultivation cycles. Lutein yield of 14.86 mg/L and COD removal efficiency of 73.2% was achieved with further implementation in actual wastewater. This work provided a new perspective in developing the potential of cultivating microalgae with corn starch wastewater to produce high-value lutein.

Effects of various side stream phosphorus recovery volume on the performance and microbial structures of mainstream biological system

The effects of three side stream phosphorous recovery volume on the performance and microbial structure of biological phosphorous removal system were investigated. Results showed that the removal of COD and nitrogen had no significant impacts by side stream operation, but the removal of phosphorous were gradually enhanced with the increase in side stream volume (SSV). The secretion of extracellular polymeric substance (EPS) were variously promoted at the stripping period. However, with the increase in SSV, the inhibition on EPS and phosphorus-accumulating organisms (PAOs) phosphorous absorption were severe and the restoration were tougher. The high throughout 16S rRNA gene sequencing revealed the succession of microbial population were significantly effected by side stream operation. The relative abundances of PAOs reduced to 0.17%, 0.09% and 0.07% with 30%, 60% and 90% side stream operations, respectively. At the restoration period, the relative abundance could restore to 95.4%, 65% and 38% initial values, respectively. The relative abundances of glycogen-accumulating organisms were variously enhanced under various SSV conditions. In conclusion, at SSV of 60%, more abundant recovered phosphorous could be obtained and had slighter and reversible effects on activated sludges. The SSV of 60% was the applicable SSV for phosphorous recovery from the biological phosphorus removal system.

Development of a double-layer EPS-ASM2d model to illustrate the effect on mainstream biological phosphorus system in side-stream phosphorus recovery process

In order to deeply investigate the influences of side-stream phosphorus (P) recovery operation on mainstream biological P removal system, an improved activated sludge model no. 2 (ASM2d) was established to illuminate the metabolic processes of P in a side-stream P recovery reactor. The improved ASM2d (named D-EPS-ASM2d) was established by extending of the P metabolic processes of double-layer extracellular polymeric substances (EPS) into conventional ASM2d model. The predicted effluent concentrations of COD, NH₄, and TP by the D-EPS-ASM2d had good fits with measured values in the side-stream P recovery process. Comparing with conventional ASM2d, the likelihood values of D-EPS-ASM2d related to COD, NH₄, and TP effluents were increased from 0.694, 0.837 and 0.762 to 0.868, 0.904 and 0.920, respectively, implying the simulation performances of D-EPS-ASM2d on nutrient removal processes were significantly improved. Besides, the calibrated values of f_PP,TEPS was 0.09, 0.102 and 0.123 as side-stream volume (SSV) increasing from 0.3 to 0.9, implying the fraction of P removal by tightly-bound EPS was enhanced with the increase of SSV.

Nitrous oxide emission during denitrifying phosphorus removal process: A review on the mechanisms and influencing factors

Excessive emissions of nitrogen (N) and phosphorus (P) pollutants are leading to increased eutrophication of water bodies. Biological N and P removal processes have become a research priority in the field of sewage treatment with the aim of improving sewage discharge standards in countries worldwide. Denitrifying P removal processes are more efficient for solving problems related to carbon source competition, sludge age conflict, and high aeration energy consumption compared to traditional biological N and P removal processes, but they are easy to produce nitrous oxide (N₂O) in the process of sewage treatment. N₂O is a greenhouse gas with a global warming potential approximately 190-270 times that of CO₂ and 4-21 times that of CH₄, which was produced and released into the environmental in denitrifying P removal systems under conditions of a low C/N ratio, high dissolved oxygen, and low activity of denitrifying phosphorus accumulating organisms (DPAOs). This paper reviews the emission characteristics and influencing factors of N₂O during denitrifying P removal processes and proposes appropriate strategies for controlling the emission of N₂O. This work serves as a basis for the development of new sewage treatment processes and the reduction of greenhouse gas emissions in future wastewater treatment plants.

Impact of the acetate/oleic acid ratio on the performance, quorum sensing, and microbial community of sequencing batch reactor system

This study comprehensively investigated the impact of acetate/oleic acid ratios (80%/20%, 60%/40%, 40%/60%, and 20%/80%) on sequencing batch reactor (SBR) with respect to the variations in performance, quorum sensing (QS), and microbial community. Results showed that NH⁺₄-N removal was not affected by the acetate/oleic acid ratios, while the COD, total nitrogen (TN), and PO^3-₄-P removal was considerably affected. The increasing oleic acid ratios led to severe sludge bulking, which was significantly positively correlated with proteins/polysaccharides (p < 0.001). The correlation of QS with the performance and sludge properties was also observed. High-throughput sequencing demonstrated that microbial compositions considerably shifted with varying acetate/oleic acid ratios. Moreover, the potential correlation of bacterial genera with the SBR performance and QS was proposed. This study elucidated the effect of acetate/oleic acid ratios on SBR from microbial viewpoint, which provided insights into fully understanding the essential roles of carbon source on wastewater treatment.

Insights into the effects of carbon source on sequencing batch reactors: Performance, quorum sensing and microbial community

Effects of carbon source on the performance, quorum sensing (QS) and microbial communities in the sequencing batch reactors were investigated in this work. Among the chosen carbon source, sodium acetate (R1), glucose (R2), starch (R3) and Tween 80 (R4), sodium acetate was the best carbon source for nutrient removal, while starch was favorable for inducing the sludge bulking, and Tween 80 was beneficial to the production of extracellular polymeric substances (EPS) and proliferation of Microthrix parvicella. Additionally, the R² value of linear correlation between sludge settleability and particle size in four reactors followed an order of R1 > R2 > R3 > R4. Moreover, Person correlation analysis showed that various significant correlations were observed in reactors fed with different carbon sources and the QS mainly mediated the production and component of EPS. High-throughput sequencing analysis revealed that the carbon source affected microbial communities and the Canonical correspondence analysis results indicated that QS related to microbial communities. It was inferred that the interactions between microbial communities and QS affected system performance.

Purification of starch and phosphorus wastewater using core-shell magnetic seeds prepared by sulfated roasting

Core-shell magnetic seeds with certain adsorption capacity that were prepared by sulfated roasting, served as the core of a magnetic separation technology for purification of starch wastewater. XRD and SEM results indicate that magnetite's surface transformed to be porous α-Fe₂O₃ structure. Compared with magnetite particles, the specific surface area was significantly improved to be 8.361 from 2.591 m²/g, with little decrease in specific susceptibility. Zeta potential, FT-IR and XPS experiments indicate that both phosphate and starch adsorbed on the surface of the core-shell magnetic seeds by chemical adsorption, which fits well with the Langmuir adsorption model. The porous surface structure of magnetic seeds significantly contributes to the adsorption of phosphate and starch species, which can be efficiently removed to be 1.51 mg/L (phosphate) and 9.51 mg/L (starch) using magnetic separation.