Native efflux pumps of Escherichia coli responsible for short and medium chain alcohol

Biotechnological Plastic Degradation and Valorization Using Systems Metabolic Engineering

Various kinds of plastics have been developed over the past century, vastly improving the quality of life. However, the indiscriminate production and irresponsible management of plastics have led to the accumulation of plastic waste, emerging as a pressing environmental concern. To establish a clean and sustainable plastic economy, plastic recycling becomes imperative to mitigate resource depletion and replace non-eco-friendly processes, such as incineration. Although chemical and mechanical recycling technologies exist, the prevalence of composite plastics in product manufacturing complicates recycling efforts. In recent years, the biodegradation of plastics using enzymes and microorganisms has been reported, opening a new possibility for biotechnological plastic degradation and bio-upcycling. This review provides an overview of microbial strains capable of degrading various plastics, highlighting key enzymes and their role. In addition, recent advances in plastic waste valorization technology based on systems metabolic engineering are explored in detail. Finally, future perspectives on systems metabolic engineering strategies to develop a circular plastic bioeconomy are discussed.

Strengthening microbial cell factories for efficient production of bioactive molecules

High demand of bioactive molecules (food additives, antibiotics, plant growth enhancers, cosmetics, pigments and other commercial products) is the prime need for the betterment of human life where the applicability of the synthetic chemical product is on the saturation due to associated toxicity and ornamentations. It has been noticed that the discovery and productivity of such molecules in natural scenarios are limited due to low cellular yields as well as less optimized conventional methods. In this respect, microbial cell factories timely fulfilling the requirement of synthesizing bioactive molecules by improving production yield and screening more promising structural homologues of the native molecule. Where the robustness of the microbial host can be potentially achieved by taking advantage of cell engineering approaches such as tuning functional and adjustable factors, metabolic balancing, adapting cellular transcription machinery, applying high throughput OMICs tools, stability of genotype/phenotype, organelle optimizations, genome editing (CRISPER/Cas mediated system) and also by developing accurate model systems via machine-learning tools. In this article, we provide an overview from traditional to recent trends and the application of newly developed technologies, for strengthening the systemic approaches and providing future directions for enhancing the robustness of microbial cell factories to speed up the production of biomolecules for commercial purposes.

Designing Microbial Cell Factories for the Production of Chemicals

The sustainable production of chemicals from renewable, nonedible biomass has emerged as an essential alternative to address pressing environmental issues arising from our heavy dependence on fossil resources. Microbial cell factories are engineered microorganisms harboring biosynthetic pathways streamlined to produce chemicals of interests from renewable carbon sources. The biosynthetic pathways for the production of chemicals can be defined into three categories with reference to the microbial host selected for engineering: native-existing pathways, nonnative-existing pathways, and nonnative-created pathways. Recent trends in leveraging native-existing pathways, discovering nonnative-existing pathways, and designing de novo pathways (as nonnative-created pathways) are discussed in this Perspective. We highlight key approaches and successful case studies that exemplify these concepts. Once these pathways are designed and constructed in the microbial cell factory, systems metabolic engineering strategies can be used to improve the performance of the strain to meet industrial production standards. In the second part of the Perspective, current trends in design tools and strategies for systems metabolic engineering are discussed with an eye toward the future. Finally, we survey current and future challenges that need to be addressed to advance microbial cell factories for the sustainable production of chemicals.

Modification of substrate and product transport systems in Klebsiella pneumoniae to improve 1,3-propanediol production

Substrate uptake and product export are important for microbial growth and product synthesis. Here, the glycerol uptake facilitator (GlpF) and the members of the resistance-nodulation-cell division (RND) type efflux system were overexpressed in Klebsiella pneumoniae to promote 1,3-propanediol (1,3-PDO) production. Overexpression of the endogenous K. pneumoniae GlpF improved glycerol dehydratase activity and promoted 1,3-PDO titer from 55.6 to 65.1 g/L. RND members AcrA and the AcrE had no impact on 1,3-PDO production. RND members AcrF and the TolC increased 1,3-PDO titer from 55.6 g/L to 68.4 and 65.4 g/L, respectively. MexB significantly decreased glycerol dehydratase activity and 1,3-PDO titer. Notably, MexF dramatically enhanced glycerol dehydratase activity and promoted 1,3-PDO titer and glycerol conversion rate to 74.0 g/L and 0.62 mol/mol, respectively. However, coexpression of the endogenous GlpF and MexF did not further improve 1,3-PDO production. The results present here provided novel information about the applications of the uptake of glycerol and the efflux of 1,3-PDO.

Advances and prospects in metabolic engineering of Escherichia coli for L-tryptophan production

As an important raw material for pharmaceutical, food and feed industry, highly efficient production of L-tryptophan by Escherichia coli has attracted a considerable attention. However, there are complicated and multiple layers of regulation networks in L-tryptophan biosynthetic pathway and thus have difficulty to rewrite the biosynthetic pathway for producing L-tryptophan with high efficiency in E. coli. This review summarizes the biosynthetic pathway of L-tryptophan and highlights the main regulatory mechanisms in E. coli. In addition, we discussed the latest metabolic engineering strategies achieved in E. coli to reconstruct the L-tryptophan biosynthetic pathway. Moreover, we also review a few strategies that can be used in E. coli to improve robustness and streamline of L-tryptophan high-producing strains. Lastly, we also propose the potential strategies to further increase L-tryptophan production by systematic metabolic engineering and synthetic biology techniques.

Exploiting the chemical composition of essential oils from Psidium cattleianum and Psidium guajava and its antimicrobial and antioxidant properties

The genus Psidium comprises several native Brazilian plants, such as the araçá and guava trees. They are interesting sources of essential oils (EOs) that can be used as natural preservatives in foods due to their bioactive properties. This work aimed to evaluate and correlate the biological properties of the EOs from araçá and guava leaves with their chemical compounds. The gas chromatography-mass spectrometry (GC/MS) was used to determine the chemical composition of EOs. The antimicrobial activity was tested against 16 foodborne pathogens and the antioxidant capacity was determined by ABTS, DPPH, and FRAP assays. The major compounds identified in the essential oil of araçá (EOA) were β-caryophyllene and β-elemene, representing 38.69% and 7.47%, respectively, whereas β-selinene (13.83%), α-humulene (10.90%), and β-caryophyllene (7.61%) were the major compounds identified in the essential oil of guava (EOG). Both EOs showed activity against Salmonella Enteritidis, with MIC being 1.41 µg/ml for the EOA and 1.37 µg/ml for the EOG. The EOA was more effective than the EOG against strains of Listeria monocytogenes and Pseudomonas aeruginosa, with the MIC being 1.41 µg/ml. The EOA showed 10.43, 12.35, and 3.92 µmol TE/ml at 90 µg/ml whereas the EOG showed 4.54, 8.94, and 3.43 µmol TE/ml at 88 µg/ml for ABTS, DPPH, and FRAP, respectively. Thus, the EOs demonstrated an effective action against foodborne pathogens and free radicals, indicative of their potential use as natural preservatives for foods. PRACTICAL APPLICATION: Guava and araçá are native Brazilian plants producers of essential oils, natural compounds with antimicrobial and antioxidant potential. The chemical composition of essential oils is responsible for its beneficial properties. The results demonstrated that the essential oils studied are rich in β-caryophyllene and has excellent activity against malefic microorganisms and free radicals, and can also be used as natural preservatives in foods.

Changes in efflux pump activity of Clostridium beijerinckii throughout ABE fermentation

Pumping toxic substances through a cytoplasmic membrane by protein transporters known as efflux pumps represents one bacterial mechanism involved in the stress response to the presence of toxic compounds. The active efflux might also take part in exporting low-molecular-weight alcohols produced by intrinsic cell metabolism; in the case of solventogenic clostridia, predominantly acetone, butanol and ethanol (ABE). However, little is known about this active efflux, even though some evidence exists that membrane pumps might be involved in solvent tolerance. In this study, we investigated changes in overall active efflux during ABE fermentation, employing a flow cytometric protocol adjusted for Clostridia and using ethidium bromide (EB) as a fluorescence marker for quantification of direct efflux. A fluctuation in efflux during the course of standard ABE fermentation was observed, with a maximum reached during late acidogenesis, a high efflux rate during early and mid-solventogenesis and an apparent decrease in EB efflux rate in late solventogenesis. The fluctuation in efflux activity was in accordance with transcriptomic data obtained for various membrane exporters in a former study. Surprisingly, under altered cultivation conditions, when solvent production was attenuated, and extended acidogenesis was promoted, stable low efflux activity was reached after an initial peak that appeared in the stage comparable to standard ABE fermentation. This study confirmed that efflux pump activity is not constant during ABE fermentation and suggests that undisturbed solvent production might be a trigger for activation of pumps involved in solvent efflux. KEY POINTS: • Flow cytometric assay for efflux quantification in Clostridia was established. • Efflux rate peaked in late acidogenesis and in early solventogenesis. • Impaired solventogenesis led to an overall decrease in efflux.

Phenotypic and Genomic Analysis of Clostridium beijerinckii NRRL B-598 Mutants With Increased Butanol Tolerance

N-Butanol, a valuable solvent and potential fuel extender, can be produced via acetone-butanol-ethanol (ABE) fermentation. One of the main drawbacks of ABE fermentation is the high toxicity of butanol to producing cells, leading to cell membrane disruption, low culture viability and, consequently, low produced concentrations of butanol. The goal of this study was to obtain mutant strains of Clostridium beijerinckii NRRL B-598 with improved butanol tolerance using random chemical mutagenesis, describe changes in their phenotypes compared to the wild-type strain and reveal changes in the genome that explain improved tolerance or other phenotypic changes. Nine mutant strains with stable improved features were obtained by three different approaches and, for two of them, ethidium bromide (EB), a known substrate of efflux pumps, was used for either selection or as a mutagenic agent. It is the first utilization of this approach for the development of butanol-tolerant mutants of solventogenic clostridia, for which generally there is a lack of knowledge about butanol efflux or efflux mechanisms and their regulation. Mutant strains exhibited increase in butanol tolerance from 36% up to 127% and the greatest improvement was achieved for the strains for which EB was used as a mutagenic agent. Additionally, increased tolerance to other substrates of efflux pumps, EB and ethanol, was observed in all mutants and higher antibiotic tolerance in some of the strains. The complete genomes of mutant strains were sequenced and revealed that improved butanol tolerance can be attributed to mutations in genes encoding typical stress responses (chemotaxis, autolysis or changes in cell membrane structure), but, also, to mutations in genes X276_07980 and X276_24400, encoding efflux pump regulators. The latter observation confirms the importance of efflux in butanol stress response of the strain and offers new targets for rational strain engineering.

Recent advances in improving metabolic robustness of microbial cell factories

Engineering microbial cell factories has been widely applied to produce compounds spanning from intricate natural products to bulk commodities. In each case, host robustness is essential to ensure the reliable and sustainable production of targeted metabolites. However, it can be negatively affected by metabolic burden, pathway toxicity, and harsh environment, resulting in a decreased titer and productivity. Enhanced robustness enables host to have better production performance under complicated growth circumstances. Here, we review current strategies for boosting host robustness, including metabolic balancing, genetic and phenotype stability enhancement, and tolerance engineering. In addition, we discuss the challenges and future perspectives on microbial host engineering for increased robustness.

Role of efflux in enhancing butanol tolerance of bacteria

N-butanol, a valued solvent and potential fuel extender, could possibly be produced by fermentation using either native producers, i.e. solventogenic Clostridia, or engineered platform organisms such as Escherichia coli or Pseudomonas species, if the main process obstacle, a low final butanol concentration, could be overcome. A low final concentration of butanol is the result of its high toxicity to production cells. Nevertheless, bacteria have developed several mechanisms to cope with this toxicity and one of them is active butanol efflux. This review presents information about a few well characterized butanol efflux pumps from Gram-negative bacteria (P. putida and E. coli) and summarizes knowledge about putative butanol efflux systems in Gram-positive bacteria.

Role of LsrR in the regulation of antibiotic sensitivity in avian pathogenic Escherichia coli

Avian pathogenic Escherichia coli (APEC) is a specific group of extraintestinal pathogenic E. coli that causes a variety of extraintestinal diseases in chickens, ducks, pigeons, turkeys, and other avian species. These diseases lead to significant economic losses in the poultry industry worldwide. However, owing to excessive use of antibiotics in the treatment of infectious diseases, bacteria have developed antibiotic resistance. The development of multidrug efflux pumps is one important bacterial antibiotic resistance mechanism. A multidrug efflux pump, MdtH, which belongs to the major facilitator superfamily of transporters, confers resistance to quinolone antibiotics such as norfloxacin and enoxacin. LsrR regulates hundreds of genes that participate in myriad biological processes, including mobility, biofilm formation, and antibiotic susceptibility. However, whether LsrR regulates mdtH transcription and then affects bacterial resistance to various antibiotics in APEC has not been reported. In the present study, the lsrR mutant was constructed from its parent strain APECX40 (WT), and high-throughput sequencing was performed to analyze the transcriptional profile of the WT and mutant XY10 strains. The results showed that lsrR gene deletion upregulated the mdtH transcript level. Furthermore, we also constructed the lsrR- and mdtH-overexpressing strains and performed antimicrobial susceptibility testing, antibacterial activity assays, real-time reverse transcription PCR, and electrophoretic mobility shift assays to investigate the molecular regulatory mechanism of LsrR on the MdtH multidrug efflux pump. The lsrR mutation and the mdtH-overexpressing strain decreased cell susceptibility to norfloxacin, ofloxacin, ciprofloxacin, and tetracycline by upregulating mdtH transcript levels. In addition, the lsrR-overexpressing strain increased cell susceptibility to norfloxacin, ofloxacin, ciprofloxacin, and tetracycline by downregulating mdtH transcript levels. Electrophoretic mobility shift assays indicated that LsrR directly binds to the mdtH promoter. Therefore, this study is the first to demonstrate that LsrR inhibits mdtH transcription by directly binding to its promoter region. This action subsequently increases susceptibility to the aforementioned four antibiotics in APECX40.

Engineering transport systems for microbial production

The rapid development in the field of metabolic engineering has enabled complex modifications of metabolic pathways to generate a diverse product portfolio. Manipulating substrate uptake and product export is an important research area in metabolic engineering. Optimization of transport systems has the potential to enhance microbial production of renewable fuels and chemicals. This chapter comprehensively reviews the transport systems critical for microbial production as well as current genetic engineering strategies to improve transport functions and thus production metrics. In addition, this chapter highlights recent advancements in engineering microbial efflux systems to enhance cellular tolerance to industrially relevant chemical stress. Lastly, future directions to address current technological gaps are discussed.