Evaluating mechanical properties of silica-coated alginate beads for immobilized biocatalysis

Alginate-based materials for enzyme encapsulation

Enzymes are widely used in industry due to their high efficiency and selectivity. However, their low stability during certain industrial processes can result in a significant loss of catalytic activity. Encapsulation is a promising technique that can stabilize enzymes by protecting them from environmental stresses such as extreme temperature and pH, mechanical force, organic solvents, and proteases. Alginate and alginate-based materials have emerged as effective carriers for enzyme encapsulation due to their biocompatibility, biodegradability, and ability to form gel beads through ionic gelation. This review presents various alginate-based encapsulation systems for enzyme stabilization and explores their applications in different industries. We discuss the preparation methods of alginate encapsulated enzymes and analyze the release mechanisms of enzymes from alginate materials. Additionally, we summarize the characterization techniques used for enzyme-alginate composites. This review provides insights into the use of alginate encapsulation as a means of stabilizing enzymes and highlights the potential benefits for various industrial applications.

Preparation of Hybrid Sol-Gel Materials Based on Living Cells of Microorganisms and Their Application in Nanotechnology

Microorganism-cell-based biohybrid materials have attracted considerable attention over the last several decades. They are applied in a broad spectrum of areas, such as nanotechnologies, environmental biotechnology, biomedicine, synthetic chemistry, and bioelectronics. Sol-gel technology allows us to obtain a wide range of high-purity materials from nanopowders to thin-film coatings with high efficiency and low cost, which makes it one of the preferred techniques for creating organic-inorganic matrices for biocomponent immobilization. This review focuses on the synthesis and application of hybrid sol-gel materials obtained by encapsulation of microorganism cells in an inorganic matrix based on silicon, aluminum, and transition metals. The type of immobilized cells, precursors used, types of nanomaterials obtained, and their practical applications were analyzed in detail. In addition, techniques for increasing the microorganism effective time of functioning and the possibility of using sol-gel hybrid materials in catalysis are discussed.

Saccharification of acid-alkali pretreated sugarcane bagasse using immobilized enzymes from Phomopsis stipata

In this study, a mild-temperature two-step dilute acid and alkaline pretreatment (DA-AL) process was developed to generate highly digestible cellulose pulp from sugarcane bagasse for producing fermentable sugars by novel thermophilic cellulases derived from Phomopsis stipata SC 04. First, DA pretreatment of sugarcane bagasse at 2% (w/v) H2SO4 and 121 °C for 71 min, followed by AL pretreatment at 2.2% (w/v) NaOH and 110 °C for 100 min led to the pulp containing 86% cellulose. The cellulose pulp was hydrolyzed by the immobilized P. stipata cellulase on Ca-alginate beads, following optimization of immobilization conditions. The results showed that mixing the cellulase extract and sodium alginate solutions at a volume ratio of 1:4 led to the highest immobilization efficiencies of 99.83% for β-glucosidase and 97.52% for endoglucanase while the enzyme leakage was the lowest. The use of the immobilized cellulases led to a cellulose digestibility of 30% in the initial batch and recycling of the immobilized cellulases reduced cellulose digestibility to 18% after s recycling for two times (a total of third rounds). Overall, this study provides useful information in the use of a mild pretreatment process to produce highly digestible cellulose pulp and in the immobilization of thermophilic cellulases to produce fermentable sugars from pretreated biomass.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03101-2.

Highly effective enzymes immobilization on ceramics: Requirements for supports and enzymes

Enzyme immobilization is a well-known method for the improvement of enzyme reusability and stability. To achieve very high effectiveness of the enzyme immobilization, not only does the method of attachment need to be optimized, but the appropriate support must be chosen. The essential necessities addressed to the support applied for enzyme immobilization can be focused on the material features as well as on the stability and resistances in certain conditions. Ceramic membranes and nanoparticles are the most widespread supports for enzyme immobilization. Hence, the immobilization of enzymes on ceramic membrane and nanoparticles are summarized and discussed. The important properties of the supports are particle size, pore structure, active surface area, volume to surface ratio, type and number of reactive available groups, as well as thermal, mechanical, and chemical stability. The modifiers and the crosslinkers are crucial to the enzyme loading amount, the chemical and physical stability, and the reusability and catalytical activity of the immobilized enzymes. Therefore, the chemical and physical methods of modification of ceramic materials are presented. The most popular and used modifiers (e.g. APTES, CPTES, VTES) as well as activating agents (GA, gelatin, EDC and/or NHS) applied to the grafting process are discussed. Moreover, functional groups of enzymes are presented and discussed since they play important roles in the enzyme immobilization via covalent bonding. The enhanced physical, chemical, and catalytical properties of immobilized enzymes are discussed revealing the positive balance between the effectiveness of the immobilization process, preservation of high enzyme activity, its good stability, and relatively low cost.

Continuous enzymatic synthesis of lactulose in packed-bed reactor with immobilized Aspergillus oryzae β-galactosidase

Lactulose synthesis from fructose and lactose in continuous packed-bed reactor operation with glyoxyl-agarose immobilized Aspergillus oryzae β-galactosidase is reported for the first time. Alternative strategies to conventional batch synthesis have been scarcely explored for lactulose synthesis. The effect of flow rate, substrates ratio and biocatalyst-inert packing material mass ratio (M_B/M_IM) were studied on reactor performance. Increase in any of these variables produced an increase in lactulose yield (Y_Lu) being higher than obtained in batch synthesis at comparable conditions. Maximum Y_Lu of 0.6 g·g^-1 was obtained at 50 °C, pH 4.5, 50% w/w total sugars, 15 mL·min^-1, fructose/lactose molar ratio of 12 and M_B/M_IM of 1/8 g·g^-1; at such conditions yield of transgalactosylated oligosaccharides (Y_TOS) was 0.16 g·g^-1, selectivity (lactulose/TOS molar ratio) was 5.4 and lactose conversion (X_Lactose) was 28%. Reactor operation with recycle had no significant effect on yield, producing only some decrease in productivity.