High special surface area and "warm light" responsive ZnO: Synthesis mechanism, application and optimization

Yellow light and ultrasound Dual-responsive strontium-doped zinc oxide composites for dental caries prevention and remineralization

Dental caries is one of the most prevalent chronic infectious diseases, mainly due to acid production by bacteria in the plaque biofilm, leading to enamel demineralization, tooth defects and pulpitis. Most of the current treatments are invasive and do not combine restoration of dental tissues, resolution of tooth staining or prevention of dental caries. In this study, a polydopamine (PDA)-encapsulated strontium-doped zinc oxide composite (Sr-ZnO@PDA, denoted as SZ@PDA) has been developed for caries prevention and remineralization. The PDA wrapping endows SZ@PDA with a narrow energy band gap (1.78 eV), which can simultaneously respond to yellow light (YL) with favorable biosafety and ultrasound (US) with high tissue penetration. The synergistic piezo-photocatalytic action of YL and US with the enhanced catalytic efficiency can generate an appropriate amount of reactive oxygen species (ROS), thus destroying the structure of bacterial cellular membranes and decomposing pigments for caries prevention and improvement of tooth staining, respectively. In addition, strontium ions (Sr2+) released by SZ@PDA, as an active element, can promote the remineralization of enamel and dentin, repairing defective dental tissues. Collectively, this versatile system (SZ@PDA) provides an effective strategy for the prevention and treatment of caries.

Tribovoltaic Effect Strengthened Microwave Catalytic Antibacterial Composite Hydrogel

Microwave (MW) therapy is an emerging therapy with high efficiency and deep penetration to combat the crisis of bacterial resistance. However, as the energy of MW is too low to induce electron transition, the mechanism of MW catalytic effect remains ambiguous. Herein, a cerium-based metal-organic framework (MOF) is fabricated and used in MW therapy. The MW-catalytic performance of CeTCPP is largely dependent on the ions in the liquid environment, and the electron transition is achieved through a "tribovoltaic effect" between water molecules and CeTCPP. By this way, CeTCPP can generate reactive oxygen species (ROS) in saline under pulsed MW irradiation, showing 99.9995 ± 0.0002% antibacterial ratio against Staphylococcus aureus (S. aureus) upon two cycles of MW irradiation. Bacterial metabolomics further demonstrates that the diffusion of ROS into bacteria led to the bacterial metabolic disorders. The bacteria are finally killed due to "amino acid starvation". In order to improve the applicability of CeTCPP, It is incorporated into alginate-based hydrogel, which maintains good MW catalytic antibacterial efficiency and also good biocompatibility. Therefore, this work provides a comprehensive instruction of using CeTCPP in MW therapy, from mechanism to application. This work also provides new perspectives for the design of antibacterial composite hydrogel.

Photodynamic therapy based on bismuth oxyiodide nanoparticles for nondestructive tooth whitening

Achieving a desired whitening effect through short treatments without using peroxide and without compromising the integrity of tooth enamel remains a challenge in teeth whitening. Here, we developed a highly safe and efficient photodynamic therapy (PDT) strategy based on visible light-activated bismuth oxyiodide nanoparticles for nondestructive tooth whitening. The Bi7O9I3 nanoparticles (NPs) exhibited efficient photocatalytic activity owing to their narrow band gap, effectively harnessing the broad spectrum of visible light to generate ample electrons and holes. Meanwhile, the presence of oxygen vacancies, low oxidation state Bi3+ and the high specific surface area endow Bi7O9I3 NPs with effective electron-hole separation ability and potent redox potentials. Empowered by these characteristics, Bi7O9I3 NPs effectively catalyzed O2 into radicals (O2•-), facilitating the degradation of dental surface pigment molecules for tooth whitening. Concurrently, they eradicated oral bacteria and bacterial biofilms adhering to tooth surfaces, thereby having a positive effect on the effectiveness of tooth whitening. This PDT strategy with Bi7O9I3 NPs shows broad application prospects in tooth whitening.

Target Recognition-Triggered Interfacial Electron Transfer Model: Toward Signal-On Photoelectrochemical Aptasensing for Efficient Detection of Staphylococcus aureus Using Ti3C2Tx-Au NBPs/ZnO NR Composites

Staphylococcus aureus (S. aureus) is one of the most common foodborne pathogens worldwide, which poses a great threat to public health. It is of utmost importance to develop rapid, simple, and sensitive methods for the determination of S. aureus. A signal-on photoelectrochemical (PEC) aptasensor is constructed herein based on titanium carbide (Ti3C2Tx)-Au nanobipyramids (NBPs)/ZnO nanoarrays (NRs). The reliability and capability of the PEC aptasensor make it suitable for the sensitive and selective determination of S. aureus. First, the electrostatically self-assembled Ti3C2Tx-Au NBP nanomaterial was coated on the ZnO NR surface by a spin-coating method. On the one hand, Ti3C2Tx-Au NBPs can broaden the spectral absorption of ZnO NRs, resulting in Ti3C2Tx-Au NBPs/ZnO NR composites that exhibit a wide range of absorption from the ultraviolet to the infrared region. On the other hand, Ti3C2Tx can reduce the agglomeration of nanoparticles, while Au NBPs can effectively fix the aptamer through the Au-S bond. Specifically, the experimental results show that when S. aureus is present, the Au NBPs-aptamer-S. aureus complex is shed from the electrode surface, altering the interfacial electron transfer model and reducing the steric hindrance. Consequently, an amplified photocurrent signal for the quantitative determination of S. aureus is obtained. Under optimal experimental conditions, a linear correlation is observed between the current response of the aptasensor and the logarithm of the S. aureus concentration (ranging from 1.0 to 1.0 × 106 CFU/mL), with an impressive detection limit as low as 0.5 CFU/mL. Furthermore, the aptasensor has been successfully employed for the detection of S. aureus in milk, with the recovery of 93.0%-99.0%. Hence, this research offers a novel approach for the detection of foodborne pathogens and other noxious substances.

Traditional Herb (Moxa) Modified Zinc Oxide Nanosheets for Quick, Efficient and High Tissue Penetration Therapy of Fungal Infection

Fungal infection possesses the characteristics of high invasion depth and easy formation of a biofilm under the skin, which greatly hinders the treatment process. Here, traditional Chinese medicine moxa is carbonized and modified with zinc oxide (ZnO) nanosheets to synthesize carbonized moxa@ZnO (CMZ) with the dual response properties of yellow light (YL) and ultrasound (US) for synergistic antifungal therapy. CMZ with narrow bandgap can respond to long-wavelength YL that is highly safe and helpful for skin repair. Simultaneously, CMZ with a piezoelectric effect can further enhance the photocatalytic efficiency under the stimulation of US with high tissue penetration. Gene mechanism investigation indicates that when exposed to US and YL irradiation, CMZ-based therapy can adjust the expression of genes associated with fungal virulence, metabolic activity, mycelial growth and biofilm development, thus efficaciously eradicating planktonic Candida albicans (C. albicans) and mature biofilm. Importantly, despite the 1.00 cm thick tissue barrier, CMZ can rapidly eliminate 99.9% of C. albicans within 4 min, showing a satisfactory deep fungicidal efficacy. The in vivo therapeutic effect of this strategy is demonstrated in both open wound and deep cutaneous infection tests, speaking of dramatically better efficacy than the traditional fungicide ketoconazole (KTZ).

Simultaneously enhancing the photocatalytic and photothermal effect of NH2-MIL-125-GO-Pt ternary heterojunction for rapid therapy of bacteria-infected wounds

Infections caused by bacteria threaten human health, so how to effectively kill bacteria is an urgent problem. We therefore synthesized a NH₂-MIL-125-GO-Pt ternary composite heterojunction with graphene oxide (GO) and platinum (Pt) nanoparticles co-doped with metal-organic framework (NH₂-MIL-125) for use in photocatalytic and photothermal synergistic disinfection under white light irradiation. Due to the good conductivity of GO and the Schottky junction between Pt and MOF, the doping of GO and Pt will effectively separate and transfer the photogenerated electron-hole pairs generated by NH₂-MIL-125, thereby effectively improving the photocatalytic efficiency of NH₂-MIL-125. Meanwhile, NH₂-MIL-125-GO-Pt has good photothermal effect under white light irradiation. Therefore, the NH₂-MIL-125-GO-Pt composite can be used for effective sterilization. The antibacterial efficiency of NH₂-MIL-125-GO-Pt against Staphylococcus aureus and Escherichia coli were as high as 99.94% and 99.12%, respectively, within 20 min of white light irradiation. In vivo experiments showed that NH₂-MIL-125-GO-Pt could effectively kill bacteria and promote wound healing. This work brings new insights into the use of NH₂-MIL-125-based photocatalyst materials for rapid disinfection of environments with pathogenic microorganisms.

•

The NH₂-MIL-125-GO-Pt ternary heterojunction is constructed by a simple hydrothermal method and in-situ growth method.

•

Two electron-hole pair separation paths are constructed in NH₂-MIL-125-GO-Pt.

•

The unique porous structure and characteristics of NH₂-MIL-125-GO-Pt can effectively adsorb oxygen and generate ROS.

•

NH₂-MIL-125-GO-Pt can treat wounds infected by bacteria with excellent biosafety.

Nanoparticles as Next-Generation Tooth-Whitening Agents: Progress and Perspectives

Whitening agents, such as hydrogen peroxide and carbamide peroxide, are currently used in clinical applications for dental esthetic and dental care. However, the free radicals generated by whitening agents cause pathological damage; therefore, their safety issues remain controversial. Furthermore, whitening agents are known to be unstable and short-lived. Since 2001, nanoparticles (NPs) have been researched for use in tooth whitening. Importantly, nanoparticles not only function as abrasives but also release reactive oxygen species and help remineralization. This review outlines the historical development of several NPs based on their whitening effects and side effects. NPs can be categorized into metals or metal oxides, ceramic particles, graphene oxide, and piezoelectric particles. Moreover, the status quo and future prospects are discussed, and recent progress in the development of NPs and their applications in various fields requiring tooth whitening is examined. This review promotes the research and development of next-generation NPs for use in tooth whitening.

Enhanced photocatalytic activities of a hierarchical ZnO/V2C MXene hybrid with a close coupling heterojunction for the degradation of methyl orange, phenol and methylene blue dye

A hierarchical ZnO/V2C MXene hybrid exhibited enhanced photocatalytic performance due to its close coupling heterojunction facilitating photo-generated carrier transfer.