A comparison between the use of a redox mediator in solution and of surface modified electrodes in the electrocatalytic oxidation of nicotinamide adenine dinucleotide

Overview on the Development of Electrochemical Immunosensors by the Signal Amplification of Enzyme- or Nanozyme-Based Catalysis Plus Redox Cycling

Enzyme-linked electrochemical immunosensors have attracted considerable attention for the sensitive and selective detection of various targets in clinical diagnosis, food quality control, and environmental analysis. In order to improve the performances of conventional immunoassays, significant efforts have been made to couple enzyme-linked or nanozyme-based catalysis and redox cycling for signal amplification. The current review summarizes the recent advances in the development of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling for signal amplification. The special features of redox cycling reactions and their synergistic functions in signal amplification are discussed. Additionally, the current challenges and future directions of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling are addressed.

ZnO Materials as Effective Anodes for the Photoelectrochemical Regeneration of Enzymatically Active NAD. ACS APPLIED MATERIALS & INTERFACES 2021;13:10719-10727. [PMID: 33645209 DOI: 10.1021/acsami.0c20630]

This work reports the study of ZnO-based anodes for the photoelectrochemical regeneration of the oxidized form of nicotinamide adenine dinucleotide (NAD⁺). The latter is the most important coenzyme for dehydrogenases. However, the high costs of NAD⁺ limit the use of such enzymes at the industrial level. The influence of the ZnO morphologies (flower-like, porous film, and nanowires), showing different surface area and crystallinity, was studied. The detection of diluted solutions (0.1 mM) of the reduced form of the coenzyme (NADH) was accomplished by the flower-like and the porous films, whereas concentrations greater than 20 mM were needed for the detection of NADH with nanowire-shaped ZnO-based electrodes. The photocatalytic activity of ZnO was reduced at increasing concentrations of NAD⁺ because part of the ultraviolet irradiation was absorbed by the coenzyme, reducing the photons available for the ZnO material. The higher electrochemical surface area of the flower-like film makes it suitable for the regeneration reaction. The illumination of the electrodes led to a significant increase on the NAD⁺ regeneration with respect to both the electrochemical oxidation in dark and the only photochemical reaction. The tests with formate dehydrogenase demonstrated that 94% of the regenerated NAD⁺ was enzymatically active.

NAD(P)-dependent glucose dehydrogenase: Applications for biosensors, bioelectrodes, and biofuel cells

This review discusses the physical and chemical properties of nicotinamide redox cofactor dependent glucose dehydrogenase (NAD(P) dependent GDH) and its extensive application in biosensors and bio-fuel cells. GDHs from different organisms show diverse biochemical properties (e.g., activity and stability) and preferences towards cofactors, such as nicotinamide adenine dinucleotide (NAD⁺) and nicotinamide adenine dinucleotide phosphate (NADP⁺). The (NAD(P)⁺) play important roles in biological electron transfer, however, there are some difficulties related to their application in devices that originate from their chemical properties and labile binding to the GDH enzyme. This review discusses the electrode modifications aimed at immobilising NAD⁺ or NADP⁺ cofactors and GDH at electrodes. Binding of the enzyme was achieved by appropriate protein engineering techniques, including polymerisation, hydrophobisation or hydrophilisation processes. Various enzyme-modified electrodes applied in biosensors, enzymatic fuel cells, and biobatteries are compared. Importantly, GDH can operate alone or as part of an enzymatic cascade, which often improves the functional parameters of the biofuel cell or simply allows use of cheaper fuels. Overall, this review explores how NAD(P)-dependent GDH has recently demonstrated high potential for use in various systems to generate electricity from biological sources for applications in implantable biomedical devices, wireless sensors, and portable electronic devices.

Reversible redox of NADH and NAD+ at a hybrid lipid bilayer membrane using ubiquinone

Here, we report the reversible interconversion between NADH and NAD(+) at a low overpotential, which is in part mediated by ubiquinone embedded in a biomimetic membrane to mimic the initial stages of respiration. This system can be used as a platform to examine biologically relevant electroactive molecules embedded in a natural membrane environment and provide new insights into the mechanism of biological redox cycling.

An electrochemical immunosensor using p-aminophenol redox cycling by NADH on a self-assembled monolayer and ferrocene-modified Au electrodes

Redox cycling of enzymatically amplified electroactive species has been widely employed for high signal amplification in electrochemical biosensors. However, gold (Au) electrodes are not generally suitable for redox cycling using a reducing (or oxidizing) agent because of the high background current caused by the redox reaction of the agent at highly electrocatalytic Au electrodes. Here we report a new redox cycling scheme, using nicotinamide adenine dinucleotide (NADH), which can be applied to Au electrodes. Importantly, p-aminophenol (AP) redox cycling by NADH is achieved in the absence of diaphorase enzyme. The Au electrodes are modified with a mixed self-assembled monolayer of mercaptododecanoic acid and mercaptoundecanol, and a partially ferrocenyl-tethered dendrimer layer. The self-assembled monolayer of long thiol molecules significantly decreases the background current of the modified Au electrodes, and the ferrocene modification facilitates easy oxidation of AP. The low amount of ferrocene on the Au electrodes minimizes ferrocene-mediated oxidation of NADH. In sandwich-type electrochemical immunosensors for mouse immunoglobulin G (IgG), an alkaline phosphatase label converts p-aminophenylphosphate (APP) into electroactive AP. The amplified AP is oxidized to p-quinoneimine (QI) by electrochemically generated ferrocenium ion. NADH reduces QI back to AP, which can be re-oxidized. This redox cycling enables a low detection limit for mouse IgG (1 pg mL(-1)) to be obtained.

Amperometric Low-Potential Detection of Malic Acid Using Single-Wall Carbon Nanotubes Based Electrodes

The electrocatalytical property of single-wall carbon nanotube (SWNT)modified electrode toward NADH detection was explored by cyclic voltammetry andamperometry techniques. The experimental results show that SWNT decrease theovervoltage required for oxidation of NADH (to 300 mV vs. Ag/AgCl) and this propertymake them suitable for dehydrogenases based biosensors. The behavior of the SWNTmodified biosensor for L-malic acid was studied as an example for dehydrogenasesbiosensor. The amperometric measurements indicate that malate dehydrogenase (MDH)can be strongly adsorbed on the surface of the SWNT-modified electrode to form anapproximate monolayer film. Enzyme immobilization in Nafion membrane can increasethe biosensor stability. A linear calibration curve was obtained for L-malic acidconcentrations between 0.2 and 1mM.

Enzyme-based biofuel cells

Enzyme-based biofuel cells possess several positive attributes for energy conversion, including renewable catalysts, flexibility of fuels (including renewables), and the ability to operate at room temperature. However, enzyme-based biofuel cells remain limited by short lifetimes, low power densities and inefficient oxidation of fuels. Recent advances in biofuel cell technology have addressed these deficiencies and include methods to increase lifetime and environmental stability.

Electrochemical sensing based on redox mediation at carbon nanotubes

An electrochemical sensing platform was developed based on the integration of redox mediators and carbon nanotubes (CNT) in a polymeric matrix. To demonstrate the concept, a redox mediator Azure dye (AZU) was covalently attached to polysaccharide chains of chitosan (CHIT) and interspersed with CNT to form composite films for the amperometric determination of beta-nicotinamide adenine dinucleotide (NADH). The incorporation of CNT into CHIT-AZU matrix facilitated the AZU-mediated electrooxidation of NADH. In particular, CNT decreased the overpotential for the mediated process by an extra 0.30 V and amplified the NADH current by approximately 35 times (at -0.10 V) while reducing the response time from approximately 70 s for CHIT-AZU to approximately 5 s for CHIT-AZU/CNT films. These effects were discussed in terms of the AZU/CNT synergy, which improved charge propagation through the CHIT-AZU/CNT matrix. The concept of CNT-facilitated redox mediation in polymeric matrixes has a potential to be of general interest for expediting redox processes in electrochemical devices such as sensors, biosensors, and biological fuel cells and reactors.

Electrocatalytic oxidation of NADH at single-wall carbon-nanotube-paste electrodes: kinetic considerations for use of a redox mediator in solution and dissolved in the paste

Cyclic voltammetry has been successfully used to study the oxidation of nicotinamide adenine dinucleotide (NADH) at single-wall carbon-nanotube-paste (CNTP) electrodes modified with p-methylaminophenolsulfate (p-MAP) and 3,4-dihydroxybenzaldehyde (3,4-DHB). Diffusion-like behaviour was observed for p-MAP-modified electrodes, and a diffusion coefficient of 2.4x10(-6) cm2 s(-1) was calculated for p-MAP in the paste. The behaviour of 3,4-DHB-modified CNTP electrodes was typical of that of surface-confined mediators. p-MAP electrocatalytic activity was first checked in solution, and a rate constant of 9.2 mol(-1) L s(-1) was obtained for the reaction between NADH and the mediator. The p-MAP-modified electrode did not have significant electrocatalytic activity for electro-oxidation of NADH, probably because of the formation of a complex between NADH and the confined mediator. In contrast, the 3,4-DHB-modified electrode had very good NADH electrocatalytic activity, with a heterogeneous rate constant of approximately 20x10(2) mol(-1) L s(-1).

Electrochemistry and Electroanalytical Applications of Carbon Nanotubes: A Review

This review addresses recent developments in electrochemistry and electroanalytical chemistry of carbon nanotubes (CNTs). CNTs have been proved to possess unique electronic, chemical and structural features that make them very attractive for electrochemical studies and electrochemical applications. For example, the structural and electronic properties of the CNTs endow them with distinct electrocatalytic activities and capabilities for facilitating direct electrochemistry of proteins and enzymes from other kinds of carbon materials. These striking electrochemical properties of the CNTs pave the way to CNT-based bioelectrochemistry and to bioelectronic nanodevices, such as electrochemical sensors and biosensors. The electrochemistry and bioelectrochemistry of the CNTs are summarized and discussed, along with some common methods for CNT electrode preparation and some recent advances in the rational functionalization of the CNTs for electroanalytical applications.