Electrochemistry of myoglobin in Nafion and multi-walled carbon nanotubes modified carbon ionic liquid electrode

Myoglobin- and Hydroxyapatite-Doped Carbon Nanofiber-Modified Electrodes for Electrochemistry and Electrocatalysis

In this paper, a hydroxyapatite (HAp)-doped carbon nanofiber (CNF)-modified carbon ionic liquid electrode (CILE) was prepared and used for the investigation on the direct electrochemistry and electrocatalysis of myoglobin (Mb). HAp nanoparticles were mixed within a polyacrylonitrile (PAN) solution, and a HAp@PAN nanofiber was synthesized by electrospinning process, which was further controlled by carbonization at 800 °C for 2 h in a nitrogen atmosphere to get a HAp@CNF nanocomposite. Various techniques were used to check the physicochemical properties of HAp@CNF. Mb was mixed with a HAp@CNF dispersion solution and casted on the surface of CILE to obtain an electrochemical sensing platform. The direct electrochemistry of Mb on the modified electrode was checked when a pair of enhanced redox waves appeared, indicating the direct electron transfer of Mb. HAp@CNF exhibited high conductivity, good biocompatibility, and large surface area, which was beneficial for Mb immobilization. The modified electrode showed excellent electrocatalytic activity toward the reduction of trichloroacetic acid and sodium nitrite, which was further used to establish a new electroanalytical method. Real samples were analyzed by the proposed method with satisfactory results.

Enzyme-Based Ultrasensitive Electrochemical Biosensors for Rapid Assessment of Nitrite Toxicity: Recent Advances and Perspectives

In the present era of rapid international globalization and industrialization, intensive use of nitrite as a fertilizing agent in agriculture, preservative, dyeing agent, food additive and as corrosion inhibitor in industrial sectors is adversely effecting environment, natural habitats and human health. The issue of toxicity and carcinogenicity due to excessive ingestion of nitrites via the dietary intake has led to an imminent need for its efficient real-time monitoring in situ. Nitrite detection employing electrochemical biosensors has been gaining high credibility in the field of clinical research. Nitrite biosensors have emerged as an outstanding choice for portable point of care testing of nitrite quantification owing to the excellent properties, such as rapidity, miniaturization, ultra-low limits of detection, multiplexing and enhanced detection sensitivity. The article is enclosed with an interesting outlook on latest emerging trends in the development of nitrite biosensors utilizing nanomaterials, such as metal nanoparticles, carbon nanotubes, metal oxide nanoparticles, nanocomposites, polymers and biomaterials. The present review embarks on the highlights relevant to the nitrite quantification in real samples, then proceeds with a meticulous description of the most pertinent electrochemical nitrite biosensors, which have been proposed by adopting diverse materials and strategies of fabrication and finally end with the achievements and future outlook signifying the application of these nanoengineered biosensors for environmental surveillance and human safety.

Core-shell heterostructured multiwalled carbon nanotubes@reduced graphene oxide nanoribbons/chitosan, a robust nanobiocomposite for enzymatic biosensing of hydrogen peroxide and nitrite

A robust nanobiocomposite based on core-shell heterostructured multiwalled carbon nanotubes@reduced graphene oxide nanoribbons (MWCNTs@rGONRs)/chitosan (CHIT) was described for the fabrication of sensitive, selective, reproducible and durable biosensor for hydrogen peroxide (H2O2) and nitrite (NO2-). The excellent physicochemical properties of MWCNTs@rGONRs such as, presence of abundant oxygen functionalities, higher area-normalized edge-plane structures and chemically active sites in combination with excellent biocompatibility of CHIT resulting in the versatile immobilization matrix for myoglobin (Mb). The most attractive property of MWCNTs@rGONRs which distinguishes it from other members of graphene family is its rich edge density and edge defects that are highly beneficial for constructing enzymatic biosensors. The direct electron transfer characteristics such as, redox properties, amount of immobilized active Mb, electron transfer efficiency and durability were studied. Being as good immobilization matrix, MWCNTs@rGONRs/CHIT is also an excellent signal amplifier which helped in achieving low detection limits to quantify H2O2 (1 nM) and NO2- (10 nM). The practical feasibility of the biosensor was successfully validated in contact lens cleaning solution and meat sample.

Simultaneous Electrochemical Detection of Benzimidazole Fungicides Carbendazim and Thiabendazole Using a Novel Nanohybrid Material-Modified Electrode

In this work, a novel ZnFe₂O₄/SWCNTs nanohybrid was successfully synthesized as electrode material and applied to the simultaneous quantitative determination of carbendazim (CBZ) and thiabendazole (TBZ). The electrochemical behaviors of CBZ and TBZ on the ZnFe₂O₄/SWCNTs/GCE were investigated using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The electrochemical active area of modified electrode was calculated, which is nearly 5.5 times that of the bare electrode. The influence of various factors such as accumulation time, pH and scan rates, type of surfactant, and the electrochemical reaction mechanism was studied. The results showed that the reaction of CBZ/TBZ was controlled by adsorption/diffusion and was a quasi-reversible/an irreversible process at the ZnFe₂O₄/SWCNTs/GCE. In the pH 7.0 phosphate-buffered saline (PBS) containing 10.0 μg/mL CTAB, the electrochemical responses of CBZ and TBZ were separately investigated and were linearly dependent on their concentrations ranging from 0.5 to 100.0 μM, with relatively low detection limits of 0.09 and 0.05 μM, respectively. The concentration range for the simultaneous determination of CBZ and TBZ was 1.0-100.0 μM. Furthermore, with satisfactory results, the proposed electrochemical sensor was successfully applied to the determination of CBZ and TBZ in the real samples.

Fabrication of highly stable and sensitive electrochemical sensor from hemoglobin–Au nanocomposites and its analytical applications

Hemoglobin–Au nanocomposites fabrication of highly stable and sensitive electrochemical sensor.

Immobilization of myoglobin on Au nanoparticle-decorated carbon nanotube/polytyramine composite as a mediator-free H2O2 and nitrite biosensor

A novel composite film was designed for use as a highly selective mediator-free amperometric biosensor, and a method was created for accomplishing direct electrochemistry of myoglobin on a multi-walled carbon nanotube and tyramine-modified composite decorated with Au nanoparticles on a glassy carbon electrode. The ultraviolet-visible and electrochemical impedance spectroscopy results showed that myoglobin retained its native conformation in the interaction with Au-PTy-f-MWCNT. The surface coverage of Mb-heme-Fe^(II)/(III) immobilized on Au-PTy-f-MWCNT and the heterogeneous electron-transfer rate constant were 2.12 × 10⁻⁹ mol cm⁻² and 4.86 s⁻¹, respectively, indicating a higher loading capacity of the nanocomposite for direct electron transfer of Mb onto the electrode surface. The proposed Mb/Au-PTy-f-MWCNT biofilm exhibited excellent electrocatalytic behavior toward the reduction of H₂O₂ and the oxidation of nitrite with linear ranges of 2 to 5000 μM and 1 to 8000 μM and lower detection limits of 0.01 μM and 0.002 μM, respectively. An apparent Michaelis-Menten constant of 0.12 mM indicated that the Mb immobilized on the Au-PTy-f-MWCNT film retained its native activity. This biosensor can be successfully applied to detect H₂O₂ and nitrite in disinfectant cream, eye drops, pickle juice, and milk samples.

Application of three-dimensional reduced graphene oxide-gold composite modified electrode for direct electrochemistry and electrocatalysis of myoglobin

In this paper a three-dimensional (3D) reduced graphene oxide (RGO) and gold (Au) composite was synthesized by electrodeposition and used for the electrode modification with carbon ionic liquid electrode (CILE) as the substrate electrode. Myoglobin (Mb) was further immobilized on the surface of 3D RGO-Au/CILE to obtain an electrochemical sensing platform. Direct electrochemistry of Mb on the modified electrode was investigated with a pair of well-defined redox waves appeared on cyclic voltammogram, indicating the realization of direct electron transfer of Mb with the modified electrode. The results can be ascribed to the presence of highly conductive 3D RGO-Au composite on the electrode surface that accelerate the electron transfer rate between the electroactive center of Mb and the electrode. The Mb modified electrode showed excellent electrocatalytic activity to the reduction of trichloroacetic acid in the concentration range from 0.2 to 36.0 mmol/L with the detection limit of 0.06 mmol/L (3σ).

Cost-effective flow injection amperometric system with metal nanoparticle loaded carbon nanotube modified screen printed carbon electrode for sensitive determination of hydrogen peroxide

Various metal nanoparticles (NPs) decorated on carbon nanotube (CNT) was modified on the home-made screen printed carbon electrode (SPCE) in order to enhances sensitivity of hydrogen peroxide (H2O2) determination. The simple casting method was used for the electrode modification. The monometallic and bimetallic NPs modified electrodes were investigated for their electrochemical properties for H2O2 reduction. The Pd-CNT/SPCE is appropriated to measure the H2O2 reduction at a potential of -0.3 V, then this modified electrode was incorporated with a home-made flow through cell and applied in a simple flow injection amperometry (FI-Amp). Some parameters influencing the resulted modified electrode and the FI-Amp system were studied. The proposed detection system was able to detect H2O2 in the range of 0.1-1.0 mM, with detection limit of 20 µM. Relative standard deviation for 100 replicated injections of 0.6 mM H2O2 was 2.3%. The reproducibility of 6 electrodes preparing in 3 different lots was 8.2%. It was demonstrated for determination of H2O2 in disinfectant, hair colorant and milk samples. Recoveries in the range of 90-109% were observed. The developed system provided high stability, good repeatability, high sample throughput and low reagent consumption.

Self-assembly of tetrakis (3-trifluoromethylphenoxy) phthalocyaninato cobalt(II) on multiwalled carbon nanotubes and their amperometric sensing application for nitrite

In this work, the soluble cobalt phthalocyanine functionalized multiwalled carbon nanotubes (MWCNTs) are synthesized by π-π stacking interaction between tetrakis (3-trifluoromethylphenoxy) phthalocyaninato cobalt(II) (CoPcF) complex and MWCNTs. The physical properties of CoPcF-MWCNTs hybrids are evaluated using spectroscopy (UV-vis, XPS, and Raman) and electron microscopy (TEM and SEM). Subsequently, an amperometric nitrite electrochemical sensor is designed by immobilizing CoPcF-MWCNTs hybrids on the glassy carbon electrode. The immobilized CoPcF complex shows the fast electron transfer rate and excellent electrocatalytic activity for the oxidation of nitrite. Under optimum experimental conditions, the proposed nitrite electrochemical sensor shows the fast response (less than 2 s), wide linear range (9.6 × 10(-8) to 3.4 × 10(-4) M) and low detection limit (6.2 × 10(-8) M) because of the good mass transport, fast electron transfer rate, and excellent electrocatalytic activity.

Enhanced Direct Electrochemistry of Glucose Oxidase and Glucose Biosensing Based on TiO2-Decorated Graphene Nanohybrids

Using TiO2-decorated graphene (TiO2-G) nanohybrids as the immobilized platform for redox protein, and selecting glucose oxidase (GOD) as model enzyme, the direct electrochemistry of GOD was investigated in this paper. By virtue of the synergetic effect between graphene and TiO2 nanoparticles, the direct electron transfer of GOD on the TiO2-G nanohybrids modified electrode was remarkably promoted with a rate constant of 3.24 s-1. Moreover, based on the decrease of the electrocatalytic response of the reduced form of GOD by dissolved oxygen, a glucose biosensor was developed, which showed a satisfactory analytical performance for glucose determination over an acceptable linear concentration range from 5×10−4 to 2×10−2 mol/L. All these results demonstrated the great significance of such TiO2-G nanohybrids for the immobilization of enzyme and other biomolecules.