1
|
Umar A, Mubeen M, Ali I, Iftikhar Y, Sohail MA, Sajid A, Kumar A, Solanki MK, Kumar Divvela P, Zhou L. Harnessing fungal bio-electricity: a promising path to a cleaner environment. Front Microbiol 2024; 14:1291904. [PMID: 38352061 PMCID: PMC10861785 DOI: 10.3389/fmicb.2023.1291904] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2023] [Accepted: 12/20/2023] [Indexed: 02/16/2024] Open
Abstract
Integrating fungi into fuel cell systems presents a promising opportunity to address environmental pollution while simultaneously generating energy. This review explores the innovative concept of constructing wetlands as fuel cells for pollutant degradation, offering a practical and eco-friendly solution to pollution challenges. Fungi possess unique capabilities in producing power, fuel, and electricity through metabolic processes, drawing significant interest for applications in remediation and degradation. Limited data exist on fungi's ability to generate electricity during catalytic reactions involving various enzymes, especially while remediating pollutants. Certain species, such as Trametes versicolor, Ganoderma lucidum, Galactomyces reessii, Aspergillus spp., Kluyveromyce smarxianus, and Hansenula anomala, have been reported to generate electricity at 1200 mW/m3, 207 mW/m2, 1,163 mW/m3, 438 mW/m3, 850,000 mW/m3, and 2,900 mW/m3, respectively. Despite the eco-friendly potential compared to conventional methods, fungi's role remains largely unexplored. This review delves into fungi's exceptional potential as fuel cell catalysts, serving as anodic or cathodic agents to mitigate land, air, and water pollutants while simultaneously producing fuel and power. Applications cover a wide range of tasks, and the innovative concept of wetlands designed as fuel cells for pollutant degradation is discussed. Cost-effectiveness may vary depending on specific contexts and applications. Fungal fuel cells (FFCs) offer a versatile and innovative solution to global challenges, addressing the increasing demand for alternative bioenergy production amid population growth and expanding industrial activities. The mechanistic approach of fungal enzymes via microbial combinations and electrochemical fungal systems facilitates the oxidation of organic substrates, oxygen reduction, and ion exchange membrane orchestration of essential reactions. Fungal laccase plays a crucial role in pollutant removal and monitoring environmental contaminants. Fungal consortiums show remarkable potential in fine-tuning FFC performance, impacting both power generation and pollutant degradation. Beyond energy generation, fungal cells effectively remove pollutants. Overall, FFCs present a promising avenue to address energy needs and mitigate pollutants simultaneously.
Collapse
Affiliation(s)
- Aisha Umar
- State Key Laboratory for Managing Biotic and Chemical Threats to the Quality and Safety of Agro-products, Institute of Agro-Product Safety and Nutrition, Zhejiang Academy of Agricultural Sciences, Hangzhou, China
- Institute of Botany, University of the Punjab, Lahore, Pakistan
| | - Mustansar Mubeen
- Department of Plant Pathology, College of Agriculture, University of Sargodha, Sargodha, Pakistan
| | - Iftikhar Ali
- Department of Genetics and Development, Columbia University Irving Medical Center, New York, NY, United States
| | - Yasir Iftikhar
- Department of Plant Pathology, College of Agriculture, University of Sargodha, Sargodha, Pakistan
| | - Muhammad Aamir Sohail
- National Key Laboratory of Plant Molecular Genetics, Center for Excellence in Molecular Plant Sciences, Institute of Plant Physiology and Ecology, Chinese Academy of Sciences, Shanghai, China
| | - Ashara Sajid
- Department of Plant Pathology, College of Agriculture, University of Sargodha, Sargodha, Pakistan
| | - Ajay Kumar
- Amity Institute of Biotechnology, Amity University, Noida, Uttar Pradesh, India
| | - Manoj Kumar Solanki
- Department of Life Sciences and Biological Sciences, IES University, Bhopal, Madhya Pradesh, India
- Plant Cytogenetics and Molecular Biology Group, Faculty of Natural Sciences, Institute of Biology, Biotechnology and Environmental Protection, University of Silesia in Katowice, Katowice, Poland
| | | | - Lei Zhou
- State Key Laboratory for Managing Biotic and Chemical Threats to the Quality and Safety of Agro-products, Institute of Agro-Product Safety and Nutrition, Zhejiang Academy of Agricultural Sciences, Hangzhou, China
| |
Collapse
|
2
|
Umar A, Smółka Ł, Gancarz M. The Role of Fungal Fuel Cells in Energy Production and the Removal of Pollutants from Wastewater. Catalysts 2023. [DOI: 10.3390/catal13040687] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/05/2023] Open
Abstract
Pure water, i.e., a sign of life, continuously circulates and is contaminated by different discharges. This emerging environmental problem has been attracting the attention of scientists searching for methods for the treatment of wastewater contaminated by multiple recalcitrant compounds. Various physical and chemical methods are used to degrade contaminants from water bodies. Traditional methods have certain limitations and complexities for bioenergy production, which motivates the search for new ways of sustainable bioenergy production and wastewater treatment. Biological strategies have opened new avenues to the treatment of wastewater using oxidoreductase enzymes for the degradation of pollutants. Fungal-based fuel cells (FFCs), with their catalysts, have gained considerable attention among scientists worldwide. They are a new, ecofriendly, and alternative approach to nonchemical methods due to easy handling. FFCs are efficiently used in wastewater treatment and the production of electricity for power generation. This article also highlights the construction of fungal catalytic cells and the enzymatic performance of different fungal species in energy production and the treatment of wastewater.
Collapse
Affiliation(s)
- Aisha Umar
- Institute of the Botany, University of the Punjab, Lahore 54590, Pakistan
| | - Łukasz Smółka
- Faculty of Production and Power Engineering, University of Agriculture in Krakow, Balicka 116B, 30-149 Krakow, Poland
| | - Marek Gancarz
- Faculty of Production and Power Engineering, University of Agriculture in Krakow, Balicka 116B, 30-149 Krakow, Poland
- Institute of Agrophysics, Polish Academy of Sciences, Doświadczalna 4, 20-290 Lublin, Poland
| |
Collapse
|
3
|
Kižys K, Zinovičius A, Jakštys B, Bružaitė I, Balčiūnas E, Petrulevičienė M, Ramanavičius A, Morkvėnaitė-Vilkončienė I. Microbial Biofuel Cells: Fundamental Principles, Development and Recent Obstacles. BIOSENSORS 2023; 13:221. [PMID: 36831987 PMCID: PMC9954062 DOI: 10.3390/bios13020221] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/20/2022] [Revised: 01/24/2023] [Accepted: 01/28/2023] [Indexed: 06/18/2023]
Abstract
This review focuses on the development of microbial biofuel cells to demonstrate how similar principles apply to the development of bioelectronic devices. The low specificity of microorganism-based amperometric biosensors can be exploited in designing microbial biofuel cells, enabling them to consume a broader range of chemical fuels. Charge transfer efficiency is among the most challenging and critical issues while developing biofuel cells. Nanomaterials and particular redox mediators are exploited to facilitate charge transfer between biomaterials and biofuel cell electrodes. The application of conductive polymers (CPs) can improve the efficiency of biofuel cells while CPs are well-suitable for the immobilization of enzymes, and in some specific circumstances, CPs can facilitate charge transfer. Moreover, biocompatibility is an important issue during the development of implantable biofuel cells. Therefore, biocompatibility-related aspects of conducting polymers with microorganisms are discussed in this review. Ways to modify cell-wall/membrane and to improve charge transfer efficiency and suitability for biofuel cell design are outlined.
Collapse
Affiliation(s)
- Kasparas Kižys
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
| | - Antanas Zinovičius
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
- Faculty of Mechanics, Vilnius Gediminas Technical University, LT-10223 Vilnius, Lithuania
| | - Baltramiejus Jakštys
- Faculty of Natural Sciences, Vytautas Magnus University, LT-44248 Kaunas, Lithuania
| | - Ingrida Bružaitė
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
- Faculty of Fundamental Sciences, Vilnius Gediminas Technical University, LT-10223 Vilnius, Lithuania
| | - Evaldas Balčiūnas
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
| | - Milda Petrulevičienė
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
| | - Arūnas Ramanavičius
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
- Faculty of Chemistry and Geosciences, Vilnius University, LT-01513 Vilnius, Lithuania
| | - Inga Morkvėnaitė-Vilkončienė
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
- Faculty of Mechanics, Vilnius Gediminas Technical University, LT-10223 Vilnius, Lithuania
| |
Collapse
|
4
|
Rezk H, Olabi A, Abdelkareem MA, Sayed ET. Artificial intelligence as a novel tool for enhancing the performance of urine fed microbial fuel cell as an emerging approach for simultaneous power generation and wastewater treatment. J Taiwan Inst Chem Eng 2023. [DOI: 10.1016/j.jtice.2023.104726] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/19/2023]
|
5
|
Lu Y, Hu X, Tang L, Peng B, Tang J, Zeng T, Liu Q. Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals. CHEMOSPHERE 2022; 302:134779. [PMID: 35513075 DOI: 10.1016/j.chemosphere.2022.134779] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2022] [Revised: 04/23/2022] [Accepted: 04/26/2022] [Indexed: 06/14/2023]
Abstract
The development of sustainable, low-cost and responsive technology for heavy metals detection in wastewater is crucial. In this study, by combining CuO/ZnO photocathode with microbial anode, a novel photo-microbial fuel cell (PMFC) sensor was developed. The self-powered PMFC was performed under light and dark condition for heavy metals detection. Compared with MFC sensor, PMFC sensor showed a wider detection range (0.1-4 mg L-1 of Cd2+ and 10-80 mg L-1 of Cu2+). The improved performance in sensing limit and sensitivity was mainly attributed to the intimate P-N heterojunctions formed in CuO/ZnO, which accelerated the electron transport between the photocathode and the microbial anode. Besides, the toxicity of five heavy metals tested in PMFC was shown as Cd2+>Cr6+>Zn2+>Hg2+>Cu2+. This study has taken advantage of the characteristics of PMFC and facilitated its application in heavy metals detection, which provides a new approach for the development of biosensors.
Collapse
Affiliation(s)
- Yue Lu
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, Hunan, China; Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, 410082, Hunan, China.
| | - Xingxin Hu
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, Hunan, China; Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, 410082, Hunan, China
| | - Lin Tang
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, Hunan, China; Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, 410082, Hunan, China.
| | - Bo Peng
- College of Geographic Science, Hunan Normal University, Changsha, 410081, PR China
| | - Jin Tang
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, Hunan, China; Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, 410082, Hunan, China
| | - Taotao Zeng
- Hunan Province Key Laboratory of Pollution Control and Resources Reuse Technology, University of South China, Hengyang, 421001, Hunan, China
| | - Qian Liu
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, Hunan, China; Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, 410082, Hunan, China
| |
Collapse
|
6
|
Barakat NAM, Amen MT, Ali RH, Nassar MM, Fadali OA, Ali MA, Kim HY. Carbon Nanofiber Double Active Layer and Co-Incorporation as New Anode Modification Strategies for Power-Enhanced Microbial Fuel Cells. Polymers (Basel) 2022; 14:1542. [PMID: 35458291 PMCID: PMC9030816 DOI: 10.3390/polym14081542] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2022] [Revised: 03/19/2022] [Accepted: 03/23/2022] [Indexed: 12/04/2022] Open
Abstract
Co-doped carbon nanofiber mats can be prepared by the addition of cobalt acetate to the polyacrylonitrile/DMF electrospun solution. Wastewater obtained from food industries was utilized as the anolyte as well as microorganisms as the source in single-chamber batch mode microbial fuel cells. The results indicated that the single Co-free carbon nanofiber mat was not a good anode in the used microbial fuel cells. However, the generated power can be distinctly enhanced by using double active layers of pristine carbon nanofiber mats or a single layer Co-doped carbon nanofiber mat as anodes. Typically, after 24 h batching time, the estimated generated power densities were 10, 92, and 121 mW/m2 for single, double active layers, and Co-doped carbon nanofiber anodes, respectively. For comparison, the performance of the cell was investigated using carbon cloth and carbon paper as anodes, the observed power densities were smaller than the introduced modified anodes at 58 and 62 mW/m2, respectively. Moreover, the COD removal and Columbic efficiency were calculated for the proposed anodes as well as the used commercial ones. The results further confirm the priority of using double active layer or metal-doped carbon nanofiber anodes over the commercial ones. Numerically, the calculated COD removals were 29.16 and 38.95% for carbon paper and carbon cloth while 40.53 and 45.79% COD removals were obtained with double active layer and Co-doped carbon nanofiber anodes, respectively. With a similar trend, the calculated Columbic efficiencies were 26, 42, 52, and 71% for the same sequence.
Collapse
Affiliation(s)
- Nasser A M Barakat
- Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia 61519, Egypt
| | - Mohamed Taha Amen
- Microbiology Department, Faculty of Agriculture, Zagazig University, Zagazig 44511, Egypt
| | - Rasha H Ali
- Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia 61519, Egypt
| | - Mamdouh M Nassar
- Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia 61519, Egypt
| | - Olfat A Fadali
- Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia 61519, Egypt
| | - Marwa A Ali
- Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia 61519, Egypt
| | - Hak Yong Kim
- Department of Nano Convergence Engineering, Jeonbuk National University, Jeonju 54896, Korea
- Department of Organic Materials and Fiber Engineering, Jeonbuk National University, Jeonju 54896, Korea
| |
Collapse
|
7
|
Žalnėravičius R, Paškevičius A, Samukaitė-Bubnienė U, Ramanavičius S, Vilkienė M, Mockevičienė I, Ramanavičius A. Microbial Fuel Cell Based on Nitrogen-Fixing Rhizobium anhuiense Bacteria. BIOSENSORS 2022; 12:bios12020113. [PMID: 35200373 PMCID: PMC8869864 DOI: 10.3390/bios12020113] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/15/2022] [Revised: 01/29/2022] [Accepted: 02/05/2022] [Indexed: 06/01/2023]
Abstract
In this study, the nitrogen-fixing, Gram-negative soil bacteria Rhizobium anhuiense was successfully utilized as the main biocatalyst in a bacteria-based microbial fuel cell (MFC) device. This research investigates the double-chambered, H-type R. anhuiense-based MFC that was operated in modified Norris medium (pH = 7) under ambient conditions using potassium ferricyanide as an electron acceptor in the cathodic compartment. The designed MFC exhibited an open-circuit voltage (OCV) of 635 mV and a power output of 1.07 mW m-2 with its maximum power registered at 245 mV. These values were further enhanced by re-feeding the anode bath with 25 mM glucose, which has been utilized herein as the main carbon source. This substrate addition led to better performance of the constructed MFC with a power output of 2.59 mW m-2 estimated at an operating voltage of 281 mV. The R. anhuiense-based MFC was further developed by improving the charge transfer through the bacterial cell membrane by applying 2-methyl-1,4-naphthoquinone (menadione, MD) as a soluble redox mediator. The MD-mediated MFC device showed better performance, resulting in a slightly higher OCV value of 683 mV and an almost five-fold increase in power density to 4.93 mW cm-2. The influence of different concentrations of MD on the viability of R. anhuiense bacteria was investigated by estimating the optical density at 600 nm (OD600) and comparing the obtained results with the control aliquot. The results show that lower concentrations of MD, ranging from 1 to 10 μM, can be successfully used in an anode compartment in which R. anhuiense bacteria cells remain viable and act as a main biocatalyst for MFC applications.
Collapse
Affiliation(s)
- Rokas Žalnėravičius
- Centre for Physical Sciences and Technology, Sauletekio Av. 3, LT-10257 Vilnius, Lithuania; (R.Ž.); (U.S.-B.); (S.R.)
| | - Algimantas Paškevičius
- Laboratory of Biodeterioration Research, Nature Research Centre, Akademijos 2, LT-08412 Vilnius, Lithuania;
| | - Urtė Samukaitė-Bubnienė
- Centre for Physical Sciences and Technology, Sauletekio Av. 3, LT-10257 Vilnius, Lithuania; (R.Ž.); (U.S.-B.); (S.R.)
- Department of Physical Chemistry, Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Naugarduko Str. 24, LT-03225 Vilnius, Lithuania
| | - Simonas Ramanavičius
- Centre for Physical Sciences and Technology, Sauletekio Av. 3, LT-10257 Vilnius, Lithuania; (R.Ž.); (U.S.-B.); (S.R.)
| | - Monika Vilkienė
- Lithuanian Research Centre for Agriculture and Forestry, Instituto Av.1, Akademija, LT-58344 Kedainiai, Lithuania; (M.V.); (I.M.)
| | - Ieva Mockevičienė
- Lithuanian Research Centre for Agriculture and Forestry, Instituto Av.1, Akademija, LT-58344 Kedainiai, Lithuania; (M.V.); (I.M.)
| | - Arūnas Ramanavičius
- Centre for Physical Sciences and Technology, Sauletekio Av. 3, LT-10257 Vilnius, Lithuania; (R.Ž.); (U.S.-B.); (S.R.)
- Department of Physical Chemistry, Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Naugarduko Str. 24, LT-03225 Vilnius, Lithuania
| |
Collapse
|
8
|
Yuan J, Huang H, Chatterjee SG, Wang Z, Wang S. Effective factors for the performance of a co-generation system for bioethanol and electricity production via microbial fuel cell technology. Biochem Eng J 2022. [DOI: 10.1016/j.bej.2021.108309] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
9
|
Hadiyanto H, Christwardana M, Pratiwi WZ, Purwanto P, Sudarno S, Haryani K, Hoang AT. Response surface optimization of microalgae microbial fuel cell (MMFC) enhanced by yeast immobilization for bioelectricity production. CHEMOSPHERE 2022; 287:132275. [PMID: 34582932 DOI: 10.1016/j.chemosphere.2021.132275] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/25/2021] [Revised: 09/08/2021] [Accepted: 09/16/2021] [Indexed: 06/13/2023]
Abstract
In this work, suspended and immobilized Saccharomyces cerevisiae yeast in alginate was utilized as a biocatalyst to interact with different concentrations of tofu wastewater for microalgae microbial fuel cell (MMFC) application. Operating conditions are one of the factors that impact the MMFC's performance, thus they must be optimized. The response surface approach was used to optimize operating conditions, which involved CCD-randomized by five levels of two variables. With an average voltage of 0.13 V, power density of 13.94 mW·m-2, and current density of 102.20 mA·m-2, bioelectricity output produced more suspended yeast than immobilized yeast. The average voltage of MMFC with immobilized yeast was 0.123 V, the power density was 11.25 mW·m-2, and the current density was 91.82 mA·m-2. Immobilized yeast, on the other hand, led in faster stabilization of the resulted electrical output. When compared to suspension yeast, immobilized yeast removed more COD. The best conditions were reached with a yeast concentration of 10.89% w/v and a wastewater concentration of 56.94%, resulting in a power density and COD removal of 11.25 mW·m-2 and 31.82%, respectively. The effect of yeast and wastewater concentrations on power density and COD removal revealed that the model was well supported by experimental results.
Collapse
Affiliation(s)
- H Hadiyanto
- Center of Biomass and Renewable Energy (CBIORE), Department of Chemical Engineering, Diponegoro University. Jl. Prof. Soedarto SH, Tembalang, Semarang, 50271, Indonesia; School of Postgraduate Studies, Diponegoro University, Jl. Imam Bardjo SH, Semarang, Indonesia.
| | - Marcelinus Christwardana
- Department of Chemical Engineering, Institut Teknologi Indonesia, Jl. Raya Puspiptek Serpong, South Tangerang, 15320, Indonesia.
| | - Wahyu Zuli Pratiwi
- Center of Biomass and Renewable Energy (CBIORE), Department of Chemical Engineering, Diponegoro University. Jl. Prof. Soedarto SH, Tembalang, Semarang, 50271, Indonesia
| | - P Purwanto
- Center of Biomass and Renewable Energy (CBIORE), Department of Chemical Engineering, Diponegoro University. Jl. Prof. Soedarto SH, Tembalang, Semarang, 50271, Indonesia
| | - S Sudarno
- Environmental Engineering Department, Faculty of Engineering, Diponegoro University, Jl. Prof Soedarto, SH-Tembalang, Semarang 50271, Indonesia
| | - Kristinah Haryani
- Center of Biomass and Renewable Energy (CBIORE), Department of Chemical Engineering, Diponegoro University. Jl. Prof. Soedarto SH, Tembalang, Semarang, 50271, Indonesia
| | - Anh Tuan Hoang
- Institute of Engineering, Ho Chi Minh City University of Technology (HUTECH), Ho Chi Minh City, Viet Nam.
| |
Collapse
|
10
|
Prathiba S, Kumar PS, Vo DVN. Recent advancements in microbial fuel cells: A review on its electron transfer mechanisms, microbial community, types of substrates and design for bio-electrochemical treatment. CHEMOSPHERE 2022; 286:131856. [PMID: 34399268 DOI: 10.1016/j.chemosphere.2021.131856] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/13/2021] [Revised: 07/28/2021] [Accepted: 08/08/2021] [Indexed: 06/13/2023]
Abstract
The development in urbanization, growth in industrialization and deficiency in crude oil wealth has made to focus more for the renewable and also sustainable spotless energy resources. In the past two decades, the concepts of microbial fuel cell have caught more considerations among the scientific societies for the probability of converting, organic waste materials into bio-energy using microorganisms catalyzed anode, and enzymatic/microbial/abiotic/biotic cathode electro-chemical reactions. The added benefit with MFCs technology for waste water treatment is numerous bio-centered processes are available such as sulfate removal, denitrification, nitrification, removal of chemical oxygen demand and biological oxygen demand and heavy metals removal can be performed in the same MFC designed systems. The various factors intricate in MFC concepts in the direction of bioenergy production consists of maximum coulombic efficiency, power density and also the rate of removal of chemical oxygen demand which calculates the efficacy of the MFC unit. Even though the efficacy of MFCs in bioenergy production was initially quietly low, therefore to overcome these issues few modifications are incorporated in design and components of the MFC units, thereby functioning of the MFC unit have improvised the rate of bioenergy production to a substantial level by this means empowering application of MFC technology in numerous sectors including carbon capture, bio-hydrogen production, bioremediation, biosensors, desalination, and wastewater treatment. The present article reviews about the microbial community, types of substrates and information about the several designs of MFCs in an endeavor to get the better of practical difficulties of the MFC technology.
Collapse
Affiliation(s)
- S Prathiba
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603 110, India; Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603 110, India
| | - P Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603 110, India; Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603 110, India.
| | - Dai-Viet N Vo
- Institute of Environmental Sciences, Nguyen Tat Thanh University, Ho Chi Minh City, Viet Nam
| |
Collapse
|
11
|
Sarma H, Bhattacharyya P, Jadhav DA, Pawar P, Thakare M, Pandit S, Mathuriya AS, Prasad R. Fungal-mediated electrochemical system: Prospects, applications and challenges. CURRENT RESEARCH IN MICROBIAL SCIENCES 2021; 2:100041. [PMID: 34841332 PMCID: PMC8610361 DOI: 10.1016/j.crmicr.2021.100041] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2020] [Revised: 05/03/2021] [Accepted: 05/27/2021] [Indexed: 11/26/2022] Open
Abstract
Microbial fuel cells (MFCs) that generate bioelectricity from biodegradable waste have received considerable attention from biologists. Fungi play a significant role as both anodic and cathodic catalysts in MFCs. Saccharomyces cerevisiae is a fungus with an ability to transfer electrons through mediators such as methylene blue (MB), neutral red (NR) or even without a mediator. This unique role of fungal cells in exocellular electron transfer (EET) and their interactions with electrodes hold a lot of promise in areas such as wastewater treatment where yeast cell-based MFCs can be used. The present article highlights the physico-chemical factors affecting the performance of fungal-mediated MFCs in terms of power output and degradation of organic pollutants, along with the challenges associated with fungal MFCs. In addition, to this comparative assessment of fungal-mediated bio-electrochemical systems, their development, possible applications and potential challenges are also discussed.
Collapse
Affiliation(s)
- Hemen Sarma
- Department of Botany, Nanda Nath Saikia College, Titabar 785630, Assam, India
| | - P.N. Bhattacharyya
- Mycology and Microbiology Department, Tocklai Tea Research Institute, Tea Research Association, Jorhat 785008, Assam, India
| | - Dipak A. Jadhav
- Department of Agricultural Engineering, Maharashtra Institute of Technology, Aurangabad, 431010, India
| | - Prajakta Pawar
- Amity Institute of Biotechnology, Amity University, Mumbai, Maharashtra, 410206, India
| | - Mayur Thakare
- Amity Institute of Biotechnology, Amity University, Mumbai, Maharashtra, 410206, India
| | - Soumya Pandit
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201306, India
| | - Abhilasha Singh Mathuriya
- Department of Life Sciences, School of Basic Sciences and Research, Sharda University, Greater Noida, 201306, India
| | - Ram Prasad
- Department of Botany, Mahatma Gandhi Central University, Motihari, 845401, Bihar, India
| |
Collapse
|
12
|
Verma M, Mishra V. Recent trends in upgrading the performance of yeast as electrode biocatalyst in microbial fuel cells. CHEMOSPHERE 2021; 284:131383. [PMID: 34216925 DOI: 10.1016/j.chemosphere.2021.131383] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/17/2021] [Revised: 06/04/2021] [Accepted: 06/27/2021] [Indexed: 06/13/2023]
Abstract
Microbial fuel cell (MFC) is an optimistic fuel cell technology that applies microorganism's biochemical catalytic activities in consuming organic substrate and produce electricity. In the past, several researchers have reported power generation from Saccharomyces cerevisiae, but nowadays, most of the studies are centred around bacterial biofilms (prokaryotes) as anode biocatalyst. Yeast (a eukaryote) has also been applied as a biocatalyst in MFCs as they are non-pathogenic, easy to handle and tolerant to various environmental conditions. Yeast strains such as Arxula adeninvorans, Candida melibiosica, Hansenula polymorpha, Hansenula anomala, Kluyveromyces marxianus and Saccharomyces cerevisiae have been utilized in MFCs. This review summarizes the application of yeast as an anode biocatalyst together with a discussion on the mechanism of electron transfer from yeast cells to the anode and highlights the techniques applied in improving the efficiency of yeast-based MFCs. The recent challenges and benefits of utilizing yeast in MFCs have been also encapsulated in this review.
Collapse
Affiliation(s)
- Manisha Verma
- School of Biochemical Engineering, IIT (BHU), Varanasi, U. P., 221005, India.
| | - Vishal Mishra
- School of Biochemical Engineering, IIT (BHU), Varanasi, U. P., 221005, India.
| |
Collapse
|
13
|
Sedenho GC, Modenez I, Mendes GR, Crespilho FN. The role of extracellular polymeric substance matrix on Saccharomyces cerevisiae bioelectricity. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.139080] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
14
|
Abdelkareem MA, Lootah MA, Sayed ET, Wilberforce T, Alawadhi H, Yousef BAA, Olabi AG. Fuel cells for carbon capture applications. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 769:144243. [PMID: 33493911 DOI: 10.1016/j.scitotenv.2020.144243] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/02/2020] [Revised: 11/13/2020] [Accepted: 11/25/2020] [Indexed: 06/12/2023]
Abstract
The harmful effect of carbon pollution leads to depletion of the ozone layer, which is one of the main challenges confronting the world. Although progress is made in developing different carbon dioxide (CO2) capturing methods, these methods are still expensive and face several technical challenges. Fuel cells (FCs) are efficient energy converting devices that produce energy via an electrochemical process. Recently varying kinds of fuel cells are considered as an effective method for CO2 capturing and/or conversion. Among the different types of fuel cells, solid oxide fuel cells (SOFCs), molten carbonate fuel cells (MCFCs), and microbial fuel cells (MFCs) demonstrated promising results in this regard. High-temperature fuel cells such as SOFCs and MCFCs are effectively used for CO2 capturing through their electrolyte and have shown promising results in combination with power plants or industrial effluents. An algae-based microbial fuel cell is an electrochemical device used to capture and convert carbon dioxide through the photosynthesis process using algae strains to organic matters and simultaneously power generation. This review present a brief background about carbon capture and storage techniques and the technological advancement related to carbon dioxide captured by different fuel cells, including molten carbonate fuel cells, solid oxide fuel cells, and algae-based fuel cells.
Collapse
Affiliation(s)
- Mohammad Ali Abdelkareem
- Dept. of Sustainable and Renewable Energy Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Center for Advanced Materials Research, Research Institute Of Sciences and Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Chemical Engineering Department, Minia University, Elminia, Egypt
| | - Maryam Abdullah Lootah
- Dept. of Sustainable and Renewable Energy Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates
| | - Enas Taha Sayed
- Center for Advanced Materials Research, Research Institute Of Sciences and Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Chemical Engineering Department, Minia University, Elminia, Egypt.
| | - Tabbi Wilberforce
- Mechanical Engineering and Design, School of Engineering and Applied Science, Aston University, Aston Triangle, Birmingham B4 7ET, UK.
| | - Hussain Alawadhi
- Center for Advanced Materials Research, Research Institute Of Sciences and Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Dept. of Applied Physics, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates
| | - Bashria A A Yousef
- Dept. of Sustainable and Renewable Energy Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates
| | - A G Olabi
- Dept. of Sustainable and Renewable Energy Engineering, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Mechanical Engineering and Design, School of Engineering and Applied Science, Aston University, Aston Triangle, Birmingham B4 7ET, UK.
| |
Collapse
|
15
|
Olabi AG, Wilberforce T, Sayed ET, Elsaid K, Rezk H, Abdelkareem MA. Recent progress of graphene based nanomaterials in bioelectrochemical systems. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 749:141225. [PMID: 32814206 DOI: 10.1016/j.scitotenv.2020.141225] [Citation(s) in RCA: 36] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/08/2020] [Revised: 07/11/2020] [Accepted: 07/23/2020] [Indexed: 06/11/2023]
Abstract
The application of graphene (Gr) to microbial fuel cells (MFCs) and microbial electrolysis cell (MECs) is considered a very promising approach in terms of enhancing their performance. The superior Gr properties of high electrical and thermal conductivities, along with: superior specific surface area, high electron mobility, and mechanical strength, are the key features that endorse this. Factors impeding the advancement of a microbial fuel cell into commercialization involve primarily the cost of their components, and their production on a small scale. Gr with such outstanding characteristics can help mitigate these challenges, when used as electrode material. The application of Gr as an anode material improves the efficiency of electron transfer and bacterial attachment. When used as a cathode material, it supports the oxygen reduction reaction. This investigation, presents a thorough analysis of the feasibility of Gr as an electrode material in both MFC and MEC applications - based on experimental results from the investigation. Current technological advancements in the implementation of Gr in MFC and MEC are also highlighted in this review. To summarise, the investigation exposes critical issues impeding the advancement of microbial fuel cells, and proposes possible solutions to mitigate these challenges.
Collapse
Affiliation(s)
- A G Olabi
- Dept. of Sustainable and Renewable Energy Engineering, University of Sharjah, P.O. Box 27272, Sharjah, United Arab Emirates; Mechanical Engineering and Design, Aston University, School of Engineering and Applied Science, Aston Triangle, Birmingham B4 7ET, UK.
| | - Tabbi Wilberforce
- Mechanical Engineering and Design, Aston University, School of Engineering and Applied Science, Aston Triangle, Birmingham B4 7ET, UK
| | - Enas Taha Sayed
- Center for Advanced Materials Research, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Chemical Engineering Department, Minia University, Elminia, Egypt
| | - Khaled Elsaid
- Chemical Engineering Department, Texas A&M University, College Station, TX 77843-3122, USA
| | - Hegazy Rezk
- College of Engineering at Wadi Addawaser, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Electrical Engineering Department, Faculty of Engineering, Minia University, Egypt
| | - Mohammad Ali Abdelkareem
- Dept. of Sustainable and Renewable Energy Engineering, University of Sharjah, P.O. Box 27272, Sharjah, United Arab Emirates; Center for Advanced Materials Research, University of Sharjah, PO Box 27272, Sharjah, United Arab Emirates; Chemical Engineering Department, Minia University, Elminia, Egypt.
| |
Collapse
|
16
|
Sayed ET, Shehata N, Abdelkareem MA, Atieh MA. Recent progress in environmentally friendly bio-electrochemical devices for simultaneous water desalination and wastewater treatment. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 748:141046. [PMID: 32827889 DOI: 10.1016/j.scitotenv.2020.141046] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2020] [Revised: 07/13/2020] [Accepted: 07/16/2020] [Indexed: 06/11/2023]
Abstract
Bio-electrochemical systems (BESs) use electroactive micro-organisms for degrading organic materials in wastes for energy and/or chemical production. Microbial based desalination system is a cost-effective and environmentally friendly technique that can be used for water desalination with simultaneous wastewater treatment and energy harvesting. These systems can be used as a standalone technology for water desalination such as microbial desalination cell, microbial electrolysis desalination cell, or a hybrid with other desalination technology. This review summarized the recent progress in using BESs for water desalination, including microbial fuel cell-based desalination (MDC) and microbial electrolysis cell-based desalination (MEDC). The different scaling up trials to commercialize this technology, including the controlling parameters, are discussed. Moreover, the different hybrid desalination systems based on BES are summarized. Finally, the challenges facing the commercialization of the MDC systems were summarized.
Collapse
Affiliation(s)
- Enas Taha Sayed
- Center for Advanced Materials Research, University of Sharjah, 27272, Sharjah, United Arab Emirates; Chemical Engineering Department, Faculty of Engineering, Minia University, Egypt
| | - Nabila Shehata
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni‑Suef, Egypt
| | - Mohammad Ali Abdelkareem
- Center for Advanced Materials Research, University of Sharjah, 27272, Sharjah, United Arab Emirates; Chemical Engineering Department, Faculty of Engineering, Minia University, Egypt; Department of Sustainable and Renewable Energy Engineering, University of Sharjah, 27272 Sharjah, United Arab Emirates
| | - Muataz Ali Atieh
- Department of Mechanical and Nuclear Engineering, University of Sharjah, 27272 Sharjah, United Arab Emirates.
| |
Collapse
|
17
|
Hamed M, Majdi HS, Hasan BO. Effect of Electrode Material and Hydrodynamics on the Produced Current in Double Chamber Microbial Fuel Cells. ACS OMEGA 2020; 5:10339-10348. [PMID: 32426590 PMCID: PMC7226866 DOI: 10.1021/acsomega.9b04451] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/26/2019] [Accepted: 04/16/2020] [Indexed: 05/27/2023]
Abstract
In recent decades, there has been huge interest in exploring cost-effective and sustainable ways for energy production using fuel cells. In this study, different electrode materials, namely, nickel, stainless steel, brass, and graphite were used to investigate the energy production in double chamber microbial fuel cells. Yeast microorganisms (MOs) (Saccharomyces cerevisiae) were used at different concentrations for electricity production under different operating conditions with glucose as a substrate. The produced current and potential of the electrode were measured for ranges of operating conditions such as MO concentration (1-8 g/L), flow velocity (0-600 rpm), and aeration of the catholyte. It was found that there was a different performance exhibited by each electrode material, with nickel and graphite giving the highest efficiency. Increasing the flow velocity and aeration in the cathode compartment led to increasing the produced current while the flow and aeration in the anode compartment had a negative effect on the produced current. Simultaneous aeration and agitation gave high produced current values, while high agitation with aeration reduced the efficacy. The increased concentration of substrate glucose showed different influences on the produced current depending on electrode materials.
Collapse
Affiliation(s)
- Marwa
S. Hamed
- Department
of Chemical Engineering, Al-Nahrain University, Baghdad 64074, Iraq
| | - Hasan Sh. Majdi
- Department
of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Hillah 51001, Iraq
| | - Basim O. Hasan
- Department
of Chemical Engineering, Al-Nahrain University, Baghdad 64074, Iraq
| |
Collapse
|
18
|
Arbter P, Sinha A, Troesch J, Utesch T, Zeng AP. Redox governed electro-fermentation improves lipid production by the oleaginous yeast Rhodosporidium toruloides. BIORESOURCE TECHNOLOGY 2019; 294:122122. [PMID: 31525584 DOI: 10.1016/j.biortech.2019.122122] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/19/2019] [Revised: 09/03/2019] [Accepted: 09/04/2019] [Indexed: 06/10/2023]
Abstract
Electro-fermentation (EF) is a promising technique to increase the performance of bioprocesses. Here, the effect of EF on the lipid production by the yeast Rhodosporidium toruloides is studied. First, an in silico analysis was performed to unveil possible lipid yield increase and metabolic shifts by EF. Subsequently, cathodic EF (CEF) and anodic EF (AEF) were experimentally tested at different pO2 levels. CEF enabled artificial lowering of the extracellular redox potential to less than -200 mV even under strictly aerobic conditions. CEF and AEF both positively affected lipid yield and productivity. Additional CEF cultivations with the redox mediator Neutral Red yielded an immense increase in the ratio of saturated fatty acids (from 37% to 50%). Overall, this work demonstrates that EF offers broad potential to improve microbial lipid production. In this context, the use of redox mediators might be of special future interest for the production of cocoa-butter equivalents.
Collapse
Affiliation(s)
- Philipp Arbter
- Institute of Bioprocess and Biosystems Engineering, Hamburg University of Technology, Denickestraße 15, D-21073 Hamburg, Germany
| | - Aakanksha Sinha
- Institute of Bioprocess and Biosystems Engineering, Hamburg University of Technology, Denickestraße 15, D-21073 Hamburg, Germany
| | - Julie Troesch
- Institute of Bioprocess and Biosystems Engineering, Hamburg University of Technology, Denickestraße 15, D-21073 Hamburg, Germany
| | - Tyll Utesch
- Institute of Bioprocess and Biosystems Engineering, Hamburg University of Technology, Denickestraße 15, D-21073 Hamburg, Germany
| | - An-Ping Zeng
- Institute of Bioprocess and Biosystems Engineering, Hamburg University of Technology, Denickestraße 15, D-21073 Hamburg, Germany; Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, North Third Ring Road 15, Chaoyang District, 100029 Beijing, China.
| |
Collapse
|
19
|
Mardiana U, Innocent C, Cretin M, Buchari, Setiyanto H, Nurpalah R, Kusmiati M. Applicability of Alginate Film Entrapped Yeast for Microbial Fuel Cell. RUSS J ELECTROCHEM+ 2019. [DOI: 10.1134/s1023193519010075] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
20
|
Logan BE, Rossi R, Ragab A, Saikaly PE. Electroactive microorganisms in bioelectrochemical systems. Nat Rev Microbiol 2019; 17:307-319. [DOI: 10.1038/s41579-019-0173-x] [Citation(s) in RCA: 546] [Impact Index Per Article: 109.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
21
|
Abstract
Fungi are among the microorganisms able to generate electricity as a result of their metabolic processes. Throughout the last several years, a large number of papers on various microorganisms for current production in microbial fuel cells (MFCs) have been published; however, fungi still lack sufficient evaluation in this regard. In this review, we focus on fungi, paying special attention to their potential applicability to MFCs. Fungi used as anodic or cathodic catalysts, in different reactor configurations, with or without the addition of an exogenous mediator, are described. Contrary to bacteria, in which the mechanism of electron transfer is pretty well known, the mechanism of electron transfer in fungi-based MFCs has not been studied intensively. Thus, here we describe the main findings, which can be used as the starting point for future investigations. We show that fungi have the potential to act as electrogens or cathode catalysts, but MFCs based on bacteria–fungus interactions are especially interesting. The review presents the current state-of-the-art in the field of MFC systems exploiting fungi.
Collapse
|
22
|
Effect of Lactose Concentration as Lactobacillus bulgaricus Substrate on Potential Cells Produced in Microbial Fuel Cell Systems. JURNAL KIMIA SAINS DAN APLIKASI 2018. [DOI: 10.14710/jksa.21.3.144-148] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
The effect of laxose concentration as Lactobacillus bulgaricus bacterial substrate on the cell potential produced in Microbial Fuel Cell System has been done. This study aims to determine the effect of lactose concentration as bacterial substrate, to generate electricity, maximum electric potential and determine the potential value of standard lactose (E ° Lactose.) Based on Nernst equation. The MFC system of two compartments and bridges of salt as a linkage is used in this study. Anode contains lactose with variation of concentration 3 - 7% and bacteria. The cathode contains a 1M KMO4. The electrodes used are graphite. MFC operational time is 14 days. The results showed that the lactose concentration had an effect on the cell potential produced in the MFC system. Maximum cell potential yielded at 4% lactose concentration, that is 710 mV then based on Nerst equation theory obtained E ° Lactose value in MFC system of + 0,236 V.
Collapse
|
23
|
Evaluation of Kefir as a New Anodic Biocatalyst Consortium for Microbial Fuel Cell. Appl Biochem Biotechnol 2018; 185:1118-1131. [DOI: 10.1007/s12010-018-2718-2] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2017] [Accepted: 02/09/2018] [Indexed: 12/21/2022]
|
24
|
Hanzhola G, Tribidasari AI, Endang S. The Use of Boron-doped Diamond Electrode on Yeast-based Microbial Fuel Cell for Electricity Production. ACTA ACUST UNITED AC 2018. [DOI: 10.1088/1742-6596/953/1/012005] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
25
|
The Effect of KMnO4 and K3[Fe(CN)6] Concentrations on Electrical Production in Fuel Cell Microbial System with Lactobacillus bulgaricus Bacteria in a Tofu Whey Substart. JURNAL KIMIA SAINS DAN APLIKASI 2018. [DOI: 10.14710/jksa.21.1.49-53] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Microbial Fuel Cell (MFC) is a bioelectrochemical system that utilize metabolism of microorganisms to produce electrical energy. Microbial fuel cell is a bioelectrochemical system involving redox reactions that required an oxidizing agent in the process The purpose of this study was to determine the effect of various concentration of electrolyte solution KMnO4 and K3[Fe(CN)6] on electricity produced by microbial fuel cell system with Lactobacillus bulgaricus in tofu whey substrate. The principle of this study was bioelectrochemistry that changes chemical energy into electrical energy which involves a redox reaction by utilizing microbes. This study used a microbe Lactobacillus bulgaricus and substrate tofu whey with 0.39 % carbohydrate content in dual chamber MFC system using a salt bridge as a conductor of protons from anode to cathode. Anode compartment contains a mixture of microbes that have been cultured and phosphate buffer with pH 7 while cathode compartment contained electrolytes KMnO4 or K3[Fe(CN)6] in some various concentration that is 0.25 M; 0.2 M; 0.15 M; 0.1 M and 0.01 M with added potassium phosphate buffer pH 7. The MFC system using Lactobacillus bulgaricus and substrate tofu whey with 0.39% carbohydrate content and electrolyte solution KMnO4 generated maximum potential difference of 99.2 mV at concentration of 0.2 M which was higher than system with electrolyte solution K3[Fe(CN)6] 0.2 M that produced maximum potential difference of 48.6 mV.
Collapse
|
26
|
Islam MA, Ethiraj B, Cheng CK, Yousuf A, Thiruvenkadam S, Prasad R, Rahman Khan MM. Enhanced Current Generation Using Mutualistic Interaction of Yeast-Bacterial Coculture in Dual Chamber Microbial Fuel Cell. Ind Eng Chem Res 2018. [DOI: 10.1021/acs.iecr.7b01855] [Citation(s) in RCA: 33] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- M. Amirul Islam
- Faculty
of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, 26300 Pahang, Malaysia
| | - Baranitharan Ethiraj
- Department
of Biotechnology, Bannari Amman Institute of Technology, Sathyamangalam,
Erode District, Tamil Nadu 638401, India
| | - Chin Kui Cheng
- Faculty
of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, 26300 Pahang, Malaysia
- Centre
of Excellence for advancement Research Fluid Flow (CARIFF), Universiti Malaysia Pahang, 26300 Pahang, Malaysia
| | - Abu Yousuf
- Faculty
of Engineering Technology, Universiti Malaysia Pahang, 26300 Pahang, Malaysia
| | - Selvakumar Thiruvenkadam
- Department
of Chemical and Environmental Engineering, Universiti Putra Malaysia, 43400 Serdang, Malaysia
| | - Reddy Prasad
- Department
of Petroleum and Chemical Engineering, Institut Teknologi, Gadong BE1410, Brunei
| | - Md. Maksudur Rahman Khan
- Faculty
of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, 26300 Pahang, Malaysia
- Centre
of Excellence for advancement Research Fluid Flow (CARIFF), Universiti Malaysia Pahang, 26300 Pahang, Malaysia
| |
Collapse
|
27
|
Aslan S, Ó Conghaile P, Leech D, Gorton L, Timur S, Anik U. Development of a Bioanode for Microbial Fuel Cells Based on the Combination of a MWCNT-Au-Pt Hybrid Nanomaterial, an Osmium Redox Polymer andGluconobacter oxydansDSM 2343 Cells. ChemistrySelect 2017. [DOI: 10.1002/slct.201702868] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Sema Aslan
- Muğla Sıtkı Koçman University; Faculty of Science, Chemistry Department; 48000 Kötekli / Muğla Turkey
| | - Peter Ó Conghaile
- School of Chemistry; National University of Ireland Galway; University Road Galway Ireland
| | - Dónal Leech
- School of Chemistry; National University of Ireland Galway; University Road Galway Ireland
| | - Lo Gorton
- Department of Analytical Chemistry/Biochemistry and Structural Biology; Lund University; PO Box 124 SE-22100 Lund Sweden
| | - Suna Timur
- Ege University; Faculty of Science, Biochemistry Department; 35100-Bornova Izmir Turkey
- Central Research Testing and Analysis Laboratory Research and Application Center; Ege University; 35100-Bornova Izmir/ Turkey
| | - Ulku Anik
- Muğla Sıtkı Koçman University; Faculty of Science, Chemistry Department; 48000 Kötekli / Muğla Turkey
| |
Collapse
|
28
|
Mohamed HO, Obaid M, Sayed ET, Liu Y, Lee J, Park M, Barakat NAM, Kim HY. Electricity generation from real industrial wastewater using a single-chamber air cathode microbial fuel cell with an activated carbon anode. Bioprocess Biosyst Eng 2017; 40:1151-1161. [DOI: 10.1007/s00449-017-1776-0] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/21/2017] [Accepted: 04/26/2017] [Indexed: 10/19/2022]
|
29
|
Christwardana M, Kwon Y. Yeast and carbon nanotube based biocatalyst developed by synergetic effects of covalent bonding and hydrophobic interaction for performance enhancement of membraneless microbial fuel cell. BIORESOURCE TECHNOLOGY 2017; 225:175-182. [PMID: 27889476 DOI: 10.1016/j.biortech.2016.11.051] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/23/2016] [Revised: 11/11/2016] [Accepted: 11/12/2016] [Indexed: 05/23/2023]
Abstract
Membraneless microbial fuel cell (MFC) employing new microbial catalyst formed as yeast cultivated from Saccharomyces cerevisiae and carbon nanotube (yeast/CNT) is suggested. To analyze its catalytic activity and performance and stability of MFC, several characterizations are performed. According to the characterizations, the catalyst shows excellent catalytic activities by facile transfer of electrons via reactions of NAD, FAD, cytochrome c and cytochrome a3, while it induces high maximum power density (MPD) (344mW·m-2). It implies that adoption of yeast induces increases in catalytic activity and MFC performance. Furthermore, MPD is maintained to 86% of initial value even after eight days, showing excellent MFC stability.
Collapse
Affiliation(s)
- Marcelinus Christwardana
- Graduate School of Energy and Environment, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 139-743, Republic of Korea
| | - Yongchai Kwon
- Graduate School of Energy and Environment, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 139-743, Republic of Korea.
| |
Collapse
|
30
|
Nano Copper Oxide-Modified Carbon Cloth as Cathode for a Two-Chamber Microbial Fuel Cell. NANOMATERIALS 2016; 6:nano6120238. [PMID: 28335366 PMCID: PMC5302713 DOI: 10.3390/nano6120238] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/23/2016] [Revised: 12/06/2016] [Accepted: 12/07/2016] [Indexed: 11/23/2022]
Abstract
In this work, Cu2O nanoparticles were deposited on a carbon cloth cathode using a facile electrochemical method. The morphology of the modified cathode, which was characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) tests, showed that the porosity and specific surface area of the cathode improved with longer deposition times. X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) results showed that cupric oxide and cuprous oxide coexisted on the carbon cloth, which improved the electrochemical activity of cathode. The cathode with a deposition time of 100 s showed the best performance, with a power density twice that of bare carbon cloth. Linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) results revealed that moderate deposition of nano copper oxide on carbon cloth could dramatically reduce the charge transfer resistance, which contributed to the enhanced electrochemical performance. The mediation mechanism of copper oxide nanocatalyst was illustrated by the fact that the recycled conversion between cupric oxide and cuprous oxide accelerated the electron transfer efficiency on the cathode.
Collapse
|
31
|
|
32
|
Mardiana U, Innocent C, Cretin M, Buchari B, Gandasasmita S. Yeast fuel cell: Application for desalination. ACTA ACUST UNITED AC 2016. [DOI: 10.1088/1757-899x/107/1/012049] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
33
|
Sayed ET, Barakat NAM, Abdelkareem MA, Fouad H, Nakagawa N. Yeast Extract as an Effective and Safe Mediator for the Baker’s-Yeast-Based Microbial Fuel Cell. Ind Eng Chem Res 2015. [DOI: 10.1021/ie5042325] [Citation(s) in RCA: 44] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Enas Taha Sayed
- Department
of Chemical Engineering, Faculty of Engineering, Minia University, Minya 61111, Egypt
| | - Nasser A. M. Barakat
- Department
of Chemical Engineering, Faculty of Engineering, Minia University, Minya 61111, Egypt
- Department
of Organic Materials and Fiber Engineering, Chonbuk National University, Jeonju 561-756, Republic of Korea
| | - Mohammad Ali Abdelkareem
- Department
of Chemical Engineering, Faculty of Engineering, Minia University, Minya 61111, Egypt
| | - H. Fouad
- Applied
Medical Science Department, RCC, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
- Biomedical
Engineering Department, Faculty of Engineering, Helwan University, P.O. Box 11792, Helwan 11713, Egypt
| | - Nobuyoshi Nakagawa
- Department
of Chemical and Environmental Engineering, Graduate School of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiyu, Gunma 376-8515, Japan
| |
Collapse
|
34
|
Hu G, Ji S, Yu Y, Wang S, Zhou G, Li F. Organisms for biofuel production: natural bioresources and methodologies for improving their biosynthetic potentials. ADVANCES IN BIOCHEMICAL ENGINEERING/BIOTECHNOLOGY 2015; 147:185-224. [PMID: 24085385 DOI: 10.1007/10_2013_245] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/10/2023]
Abstract
In order to relieve the pressure of energy supply and environment contamination that humans are facing, there are now intensive worldwide efforts to explore natural bioresources for production of energy storage compounds, such as lipids, alcohols, hydrocarbons, and polysaccharides. Around the world, many plants have been evaluated and developed as feedstock for bioenergy production, among which several crops have successfully achieved industrialization. Microalgae are another group of photosynthetic autotroph of interest due to their superior growth rates, relatively high photosynthetic conversion efficiencies, and vast metabolic capabilities. Heterotrophic microorganisms, such as yeast and bacteria, can utilize carbohydrates from lignocellulosic biomass directly or after pretreatment and enzymatic hydrolysis to produce liquid biofuels such as ethanol and butanol. Although finding a suitable organism for biofuel production is not easy, many naturally occurring organisms with good traits have recently been obtained. This review mainly focuses on the new organism resources discovered in the last 5 years for production of transport fuels (biodiesel, gasoline, jet fuel, and alkanes) and hydrogen, and available methods to improve natural organisms as platforms for the production of biofuels.
Collapse
Affiliation(s)
- Guangrong Hu
- Shandong Provincial Key Laboratory of Energy Genetics, Key Laboratory of Biofuels, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, 266101, China
| | | | | | | | | | | |
Collapse
|
35
|
ZHANG YC, JIANG ZH, LIU Y. Application of Electrochemically Active Bacteria as Anodic Biocatalyst in Microbial Fuel Cells. CHINESE JOURNAL OF ANALYTICAL CHEMISTRY 2015. [DOI: 10.1016/s1872-2040(15)60800-3] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
36
|
Mao L, Verwoerd WS. Exploration and comparison of inborn capacity of aerobic and anaerobic metabolisms of Saccharomyces cerevisiae for microbial electrical current production. Bioengineered 2013; 4:420-30. [PMID: 23969939 PMCID: PMC3937204 DOI: 10.4161/bioe.26222] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022] Open
Abstract
Saccharomyces cerevisiae possesses numerous advantageous biological features, such as being robust, easily handled, mostly non-pathogenic and having high catabolic rates, etc., which can be considered as merits for being used as a promising biocatalyst in microbial fuel cells (MFCs) for electricity generation. Previous studies have developed efficient MFC configurations to convert metabolic electron shuttles, such as cytoplasmic NADH, into usable electric current. However, no studies have elucidated the maximum potential of S. cerevisiae for current output and the underlying metabolic pathways, resulting from the interaction of thousands of reactions inside the cell during MFC operation. To address these two key issues, this study used in silico metabolic engineering techniques, flux balance analysis (FBA), and flux variability analysis with target flux minimization (FATMIN), to model the metabolic perturbation of S. cerevisiae under the MFC-energy extraction. The FBA results showed that, in the cytoplasmic NADH-dependent mediated electron transfer (MET) mode, S. cerevisiae had a potential to produce currents at up to 5.781 A/gDW for the anaerobic and 6.193 A/gDW for the aerobic environments. The FATMIN results showed that the aerobic and anaerobic metabolisms are resilient, relying on six and five contributing reactions respectively for high current production. Two reactions, catalyzed by glutamate dehydrogenase (NAD) (EC 1.4.1.3) and methylene tetrahydrofolate dehydrogenase (NAD) (EC 1.5.1.5), were shared in both current-production modes and contributed to over 80% of the identified maximum current outputs. It is also shown that the NADH regeneration was much less energy costly than biomass production rate. Taken together, our finding suggests that S. cerevisiae should receive more research effort for MFC electricity production.
Collapse
Affiliation(s)
- Longfei Mao
- Centre for Advanced Computational Solutions; Department of Molecular Biosciences; Lincoln University; Lincoln, New Zealand
| | - Wynand S Verwoerd
- Centre for Advanced Computational Solutions; Department of Molecular Biosciences; Lincoln University; Lincoln, New Zealand
| |
Collapse
|
37
|
Zhou M, Yang J, Wang H, Jin T, Xu D, Gu T. Microbial fuel cells and microbial electrolysis cells for the production of bioelectricity and biomaterials. ENVIRONMENTAL TECHNOLOGY 2013; 34:1915-1928. [PMID: 24350445 DOI: 10.1080/09593330.2013.813951] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Today's global energy crisis requires a multifaceted solution. Bioenergy is an important part of the solution. The microbial fuel cell (MFC) technology stands out as an attractive potential technology in bioenergy. MFCs can convert energy stored in organic matter directly into bioelectricity. MFCs can also be operated in the electrolysis mode as microbial electrolysis cells to produce bioproducts such as hydrogen and ethanol. Various wastewaters containing low-grade organic carbons that are otherwise unutilized can be used as feed streams for MFCs. Despite major advances in the past decade, further improvements in MFC power output and cost reduction are needed for MFCs to be practical. This paper analysed MFC operating principles using bioenergetics and bioelectrochemistry. Several major issues were explored to improve the MFC performance. An emphasis was placed on the use of catalytic materials for MFC electrodes. Recent advances in the production of various biomaterials using MFCs were also investigated.
Collapse
Affiliation(s)
- Minghua Zhou
- Key Laboratory of Pollution Process and Environmental Criteria, Ministry of Education, College of Environmental Science and Engineering, Nankai University, Tianjin 300071, People's Republic of China.
| | - Jie Yang
- Key Laboratory of Pollution Process and Environmental Criteria, Ministry of Education, College of Environmental Science and Engineering, Nankai University, Tianjin 300071, People's Republic of China
| | - Hongyu Wang
- Key Laboratory of Pollution Process and Environmental Criteria, Ministry of Education, College of Environmental Science and Engineering, Nankai University, Tianjin 300071, People's Republic of China
| | - Tao Jin
- Key Laboratory of Pollution Process and Environmental Criteria, Ministry of Education, College of Environmental Science and Engineering, Nankai University, Tianjin 300071, People's Republic of China
| | - Dake Xu
- Department of Chemical and Biomolecular Engineering, Ohio University, Athens, OH 45701, USA
| | - Tingyue Gu
- Department of Chemical and Biomolecular Engineering, Ohio University, Athens, OH 45701, USA
| |
Collapse
|
38
|
Sayed ET, Saito Y, Tsujiguchi T, Nakagawa N. Catalytic activity of yeast extract in biofuel cell. J Biosci Bioeng 2012; 114:521-5. [DOI: 10.1016/j.jbiosc.2012.05.021] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/23/2012] [Revised: 04/19/2012] [Accepted: 05/25/2012] [Indexed: 11/27/2022]
|