A novel third generation uric acid biosensor using uricase electro-activated with ferrocene on a Nafion coated glassy carbon electrode

Well designed iridium-phosphinite complexes: Biological assays, electrochemical behavior and density functional theory calculations

Mononuclear phosphinite Iridium complexes based on ferrocene group have been prepared and characterized by various spectroscopic techniques. The complexes were subjected to cyclic voltammetry studies in order to determine the energies of HOMO and LUMO levels and to estimate their electrochemical and some electronic properties. Organic complex-based memory substrates were immobilized using TiO2-modified ITO electrodes, and the memory functions of phosphinite-based organic complexes were verified by chronoamperometry (CA) and open-circuit potential amperometry (OCPA). Extensive theoretical and experimental investigations were directed to gain a more profound understanding of the chemical descriptors and the diverse electronic transitions taking place within the iridium complexes, as well as their electrochemical characteristics. The quantum chemical calculations were carried out for the iridium complexes at the DFT/CAM-B3LYP level of theory in the gas phase. Furthermore, the antioxidant, antimicrobial, DNA binding, and DNA cleavage activities of the complexes were tested. Complex 2 exhibited the highest radical scavenging activity (67.5 ± 2.24 %) at 200.0 mg/L concentration. It was observed that the complexes formed an inhibition zone in the range of 8-15 mm against Gram + bacteria and in the range of 0-13 mm against Gram - bacteria. The agarose gel electrophoresis method was used to determine the DNA binding and DNA cleavage activities of the complexes. All of the tested complexes had DNA binding activity; however, complexes 1, 2, and 8 showed better binding activity than the others.

Uricase biofunctionalized plasmonic sensor for uric acid detection with APTES-modified gold nanotopping

Current uric acid detection methodologies lack the requisite sensitivity and selectivity for point-of-care applications. Plasmonic sensors, while promising, demand refinement for improved performance. This work introduces a biofunctionalized sensor predicated on surface plasmon resonance to quantify uric acid within physiologically relevant concentration ranges. The sensor employs the covalent immobilization of uricase enzyme using 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-Hydroxysuccinimide (NHS) crosslinking agents, ensuring the durable adherence of the enzyme onto the sensor probe. Characterization through atomic force microscopy and Fourier transform infrared spectroscopy validate surface alterations. The Langmuir adsorption isotherm model elucidates binding kinetics, revealing a sensor binding affinity of 298.83 (mg/dL)-1, and a maximum adsorption capacity of approximately 1.0751°. The biofunctionalized sensor exhibits a sensitivity of 0.0755°/(mg/dL), a linear correlation coefficient of 0.8313, and a limit of detection of 0.095 mg/dL. Selectivity tests against potentially competing interferents like glucose, ascorbic acid, urea, D-cystine, and creatinine showcase a significant resonance angle shift of 1.1135° for uric acid compared to 0.1853° for interferents at the same concentration. Significantly, at a low uric acid concentration of 0.5 mg/dL, a distinct shift of 0.3706° was observed, setting it apart from the lower values noticed at higher concentrations for all typical interferent samples. The uricase enzyme significantly enhances plasmonic sensors for uric acid detection, showcasing a seamless integration of optical principles and biological recognition elements. These sensors hold promise as vital tools in clinical and point-of-care settings, offering transformative potential in biosensing technologies and the potential to revolutionize healthcare outcomes in biomedicine.

Sensitive sensing of GLA and ISL based on highly conductivity nitrogen-doped carbon synergistic dual-template molecularly imprinted ratiometric electrochemical sensor

A novel ratiometric Molecularly Imprinted Electrochemical sensor for the specific marker of Glycyrrhiza glabra L. was developed in this work. To achieve simultaneous detection of two analytes on one sensor, we constructed a double template molecular imprinted electrochemical sensor with glabridin (GLA) and isoliquiritin (ISL) as templates. Further, Ferrocene/ZIF-8 (Fc/ZIF-8) composites were prepared via a one-pot solvothermal reaction and coated on the surface of a glassy carbon electrode (GCE), and the oxidation of Fc was presented as the internal reference signal. Nitrogen-doped carbon (NOC) with high conductivity was further loaded on the modified GCE. Based on theoretical exploration and computer directional simulation of density functional theory (DFT), the optimal functional monomer and the best ratio of double template molecules to functional monomer were screened. Under optimal conditions, the sensor produced electrochemical curves when exposed to a solution containing GLA and ISL. As the concentration of GLA and ISL increased, the peak current intensity of GLA and ISL (IGLA and IISL) also increased, while the peak current intensity of Fc (as a reference signal) remained relatively constant. The values of IGLA/IFc and IISL/IFc showed excellent linear relationships with GLA and ISL concentrations in the range of 0.1-160 μM and 0.5-150 μM, respectively. The detection limits were 0.052 μM and 0.27 μM (S/N = 3), respectively. Due to the imprinting effect of MIP and the existence of a reference signal, the sensor exhibited excellent selectivity and anti-interference ability and was successfully applied to the quality evaluation of Glycyrrhiza glabra L.

Flow injection amperometric uric acid biosensor based on AuNPs-GO-CS porous composite cryogel coated on PB-PEDOT:PSS modified screen-printed carbon electrode

An enzymatic amperometric uric acid (UA) biosensor was successfully developed by modifying a screen-printed carbon electrode (SPCE) with Prussian blue-poly(3,4-ethylene dioxythiophene) polystyrene sulfonate composite (PB-PEDOT:PSS). The modified SPCE was coated with gold nanoparticles-graphene oxide-chitosan composite cryogel (AuNPs-GO-CS cry). Uricase (UOx) was directly immobilized via chemisorption on AuNPs. The nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and Fourier transform infrared spectroscopy. The electrochemical characterization of the modified electrode was performed by cyclic voltammetry and electrochemical impedance spectroscopy. UA was determined using amperometric detection based on the reduction current of PB which was correlated with the amount of H2O2 produced during the enzymatic reaction. Under optimal conditions, the fabricated UA biosensor in a flow injection analysis (FIA) system produced a linear range from 5.0 to 300 μmol L-1 with a detection limit of 1.88 μmol L-1. The proposed sensor was stable for up to 221 cycles of detection and analysis was rapid (2 min), with good reproducibility (RSDs < 2.90 %, n = 6), negligible interferences, and recoveries from 94.0 ± 3.9 to 101.1 ± 2.6 %. The results of UA detection in blood plasma were in agreement with the enzymatic colorimetric method (P > 0.05).

Impedance nanobiosensor based on enzyme-conjugated biosynthesized gold nanoparticles for the detection of Gram-positive bacteria

In this report, gold nanoparticles (GNPS) were synthesized using cell-free extracts of seven different isolates, namely, Pseudomonas aerogenosa CEBP2, Pseudomonas sp. CEBP1, Pseudomonas pseudoalcaligenes CEB1G, Acinetobactor baumani CEBS1, Cuprividus sp. CEB3, Micrococcus luteus CUB12, and Pandoraea sp. CUB2S. The spectroscopic (UV-vis, FTIR, DLS, XRD, EDS) and microscopic (FESEM, TEM) results confirm the reduction of Au3+ to Au0 in the presence of biomolecules having reducing as well as self-stabilizing activity. In this green synthesis approach, the average particle size of biosynthesized GNPS might vary (4-60 nm) depending on the bacterial species, pH of the media, incubation time, and temperature. In this study, GSH-modified BSGNPs (Au-GSH) have shown antimicrobial activity with better stability against Gram-positive bacteria. After conjugation of lysozyme with Au-GSH (lyso@Au-GSH), the zone of inhibition was enhanced from 12 to 23 mm (Au-GSH). The TEM study shows the spherical GNP (16.65 ± 2.84) turns into a flower-shaped GNP (22.22 ± 3.12) after conjugation with lysozyme due to the formation of the protein corona. Furthermore, the nanobioconjugate (lyso@Au-GSH) was immobilized with Nafion on a glassy carbon electrode to fabricate a label-free impedance biosensor that is highly sensitive to monitor changes in the transducer surface due to biomolecular interactions. The uniquely designed biosensor could selectively detect Gram-positive bacteria in the linear range of 3.0 × 101-3 × 1010 cfu mL-1 with RE <5%. The proposed simplest biosensor exhibited good reproducibility (RSD = 3.1%) and excellent correlation (R2 = 0.999) with the standard plate count method, making it suitable for monitoring Gram-positive bacterial contamination in biofluids, food, and environmental samples.

The Renaissance of Ferrocene-Based Electrocatalysts: Properties, Synthesis Strategies, and Applications

The fascinating electrochemical properties of the redox-active compound ferrocene have inspired researchers across the globe to develop ferrocene-based electrocatalysts for a wide variety of applications. Advantages including excellent chemical and thermal stability, solubility in organic solvents, a pair of stable redox states, rapid electron transfer, and nontoxic nature improve its utility in various electrochemical applications. The use of ferrocene-based electrocatalysts enables control over the intrinsic properties and electroactive sites at the surface of the electrode to achieve specific electrochemical activities. Ferrocene and its derivatives can function as a potential redox medium that promotes electron transfer rates, thereby enhancing the reaction kinetics and electrochemical responses of the device. The outstanding electrocatalytic activity of ferrocene-based compounds at lower operating potentials enhances the specificity and sensitivity of reactions and also amplifies the response signals. Owing to their versatile redox chemistry and catalytic activities, ferrocene-based electrocatalysts are widely employed in various energy-related systems, molecular machines, and agricultural, biological, medicinal, and sensing applications. This review highlights the importance of ferrocene-based electrocatalysts, with emphasis on their properties, synthesis strategies for obtaining different ferrocene-based compounds, and their electrochemical applications.

Nanostructured wearable electrochemical and biosensor towards healthcare management: a review

In recent years, there has been a rapid increase in demand for wearable sensors, particularly these tracking the surroundings, fitness, and health of people. Thus, selective detection in human body fluid is a demand for a smart lifestyle by quick monitoring of electrolytes, drugs, toxins, metabolites and biomolecules, proteins, and the immune system. In this review, these parameters along with the main features of the latest and mostly cited research work on nanostructured wearable electrochemical and biosensors are surveyed. This study aims to help researchers and engineers choose the most suitable selective and sensitive sensor. Wearable sensors have broad and effective sensing platforms, such as contact lenses, Google Glass, skin-patch, mouth gourds, smartwatches, underwear, wristbands, and others. For increasing sensor reliability, additional advancements in electrochemical and biosensor precision, stability in uncontrolled environments, and reproducible sample conveyance are necessary. In addition, the optimistic future of wearable electrochemical sensors in fields, such as remote and customized healthcare and well-being is discussed. Overall, wearable electrochemical and biosensing technologies hold great promise for improving personal healthcare and monitoring performance with the potential to have a significant impact on daily lives. These technologies enable real-time body sensing and the communication of comprehensive physiological information.

A high-performance electrochemical biosensor using an engineered urate oxidase

We constructed a high-performance biosensor for detecting uric acid by immobilizing an engineered urate oxidase on gold nanoparticles deposited on a carbon-glass electrode. This biosensor showed a low limit-of-detection (9.16 nM), a high sensitivity (14 μA/μM), a wide range of linearity (50 nM-1 mM), and more than 28 days lifetime.

Square-wave voltammetry of human blood serum

A study on voltammetric analysis of blood serum diluted in a phosphate buffer is presented using advanced square-wave voltammetry at an edge plane pyrolytic graphite electrode. The results demonstrate that even in a complex medium like human blood serum, electrochemical characterization can be achieved through the use of advanced voltammetric techniques in conjunction with an appropriate commercially available electrode, such as the edge plane pyrolytic graphite electrode, which boosts superior electrocatalytic properties. Without undergoing any chemical treatment of the serum sample, the square-wave voltammetry technique reveals, for the first time, the electrode reactions of uric acid, bilirubin, and albumin in a single experiment, as represented by well-defined, separated, and intense voltammetric signals. All electrode processes are surface-confined, indicating that the edge plane sites of the electrode serve as an ideal platform for the competitive adsorption of electroactive species, despite the extensive chemical complexity of the serum samples. The speed and differential nature of square-wave voltammetry are crucial for obtaining an outstanding resolution of the voltammetric peaks, maintaining the quasi-reversible nature of the underlying electrode processes, while reducing the impact of follow-up chemical reactions that are coupled to the initial electron transfer for all three detected species, and minimizing fouling of the electrode surface.

Electrochemical sensors based on platinum-coated MOF-derived nickel-/N-doped carbon nanotubes (Pt/Ni/NCNTs) for sensitive nitrite detection

As excess nitrite has a serious threat to the human health and environment, constructing novel electrochemical sensors for sensitive nitrite detection is of great importance. In this report, platinum nanoparticles were deposited on nickel-/N-doped carbon nanotubes, which were obtained through a self-catalytically grown process with Ni-MOF as precursors. The as-prepared Pt/Ni/NCNTs were applied as amperometric sensors and presented superior sensing properties for nitrite detection. Benefiting from the synergy of Pt and Ni/NCNTs, Pt/Ni/NCNTs displayed much wider detection ranges (0.5-40 mM and 40-110 mM) for nitrite sensing. The sensitivity is 276.92 μA mM^-1 cm^-2 and 224.39 μA mM^-1 cm^-2, respectively. The detection limit is 0.17 μM. The Pt/Ni/NCNTs sensors also showed good feasibility for nitrite sensing in real samples (milk and peach juice) analysis. The active Pt/Ni/NCNTs composites and facile fabrication technique may provide useful strategies to develop other sensitive nitrite sensors.

An electrochemical immunosensor for the detection of Glypican-3 based on enzymatic ferrocene-tyramine deposition reaction

An ultrasensitive electrochemical immunosensor based on signal amplification of the deposition of the electroactive ferrocene-tyramine (Fc-Tyr) molecule, catalyzed by horseradish peroxidase (HRP), was constructed for the detection of the liver cancer marker Glypican-3 (GPC3). Functional electroactive molecule Fc-Tyr is reported to exhibit both the enzymatic cascade catalytic activity of tyramine signal amplification (TSA) and the excellent redox properties of ferrocene. In terms of design, the low matrix effects inherent in using the magnetic bead platforms, a quasi-homogeneous system, allowed capturing the target protein GPC3 without sample pretreatment, and loading HRP to trigger the TSA, which induced a large amount of Fc-Tyr deposited on the electrode surface layer by layer as a signal probe for the detection of GPC3. The concept of Fc-Tyr as an electroactive label was validated, GPC3 biosensor exhibited high selectivity and sensitivity to GPC3 in the range of 0.1 ng mL^-1-1 μg mL^-1. Finally, the sensor was used simultaneously with ELISA to assess GPC3 levels in the serum of clinical liver cancer patients, and the results showed consistency, with a recovery of 98.33-105.35% and a relative standard deviation (RSD) of 4.38-8.18%, providing a theoretical basis for achieving portable, rapid and point of care testing (POCT) of tumor markers.

Implementation of 3D printing technologies to electrochemical and optical biosensors developed for biomedical and pharmaceutical analysis

Three-dimensional (3D) printing technology has been applied in many areas. In recent years, new generation biosensorshave been emerged with the progress on 3D printing technology (3DPT) . Especially in the development of optical and electrochemical biosensors, 3DPT provides many advantages such as low cost, easy to manufacturing, being disposable and allow point of care testing. In this review, recent trends in the development of 3DPT based electrochemical and optical biosensors with their applications in the field of biomedical and pharmaceutical are examined. In addition, the advantages, disadvantages and future opportunities of 3DPT are discussed.

Nanomaterial-Based Electrochemical Nanodiagnostics for Human and Gut Metabolites Diagnostics: Recent Advances and Challenges

Metabolites are the intermediatory products of metabolic processes catalyzed by numerous enzymes found inside the cells. Detecting clinically relevant metabolites is important to understand their physiological and biological functions along with the evolving medical diagnostics. Rapid advances in detecting the tiny metabolites such as biomarkers that signify disease hallmarks have an immense need for high-performance identifying techniques. Low concentrations are found in biological fluids because the metabolites are difficult to dissolve in an aqueous medium. Therefore, the selective and sensitive study of metabolites as biomarkers in biological fluids is problematic. The different non-electrochemical and conventional methods need a long time of analysis, long sampling, high maintenance costs, and costly instrumentation. Hence, employing electrochemical techniques in clinical examination could efficiently meet the requirements of fully automated, inexpensive, specific, and quick means of biomarker detection. The electrochemical methods are broadly utilized in several emerging and established technologies, and electrochemical biosensors are employed to detect different metabolites. This review describes the advancement in electrochemical sensors developed for clinically associated human metabolites, including glucose, lactose, uric acid, urea, cholesterol, etc., and gut metabolites such as TMAO, TMA, and indole derivatives. Different sensing techniques are evaluated for their potential to achieve relevant degrees of multiplexing, specificity, and sensitivity limits. Moreover, we have also focused on the opportunities and remaining challenges for integrating the electrochemical sensor into the point-of-care (POC) devices.

Controlled growth of redox polymer network on single enzyme molecule for stable and sensitive enzyme electrode

The electrochemical applications of enzymes are often hampered by poor enzyme stability and low electron conductivity. In this work, a novel enzyme nanogel based on atom transfer radical polymerization (ATRP) has been developed for highly sensitive detection of glucose based on ferrocene (Fc) embedded in crosslinked polymer network nanogel. Enzyme surfaces are successively modified with Br initiator, and then in situ atom transfer radical polymerization (ATRP) was performed to build up crosslinked polyacrylamide network. The resulting single enzyme nanogel (ATRP-SEG) is uniform in size fairly. ATRP-SEG reveals bi-phasic inactivation, and the half-life of stable ATRP-SEG after 18-day incubation at 50 °C is 47 days, which is 197 times longer than that of free Gox (5.7 h). By introducing a ferrocene (Fc) containing redox polymer, poly(acrylamide-co-vinylferrocene), the half-life of Fc-ATRP-SEG after 18-day incubation at 50 °C is 49 days. Fc-ATRP-SEG is used for preparation of glucose-sensing electrode, and the sensitivity of Fc-ATRP-SEG electrode is 111 μA cm^-2 mM^-1, which is 366 and 1270 times higher than those of free GOx (0.303 μA cm^-2 mM^-1) and ATRP-SEG (0.0874 μA cm^-2 mM^-1), respectively. Fc-ATRP-SEG electrode maintained 90% of initial current density under 4 °C storage condition and repetitive usages every day for 7 days. Even the electrode repeatedly used in continuous harsh condition (250 rpm, room temperature), the current density maintained 96% after 12 h incubation at operational condition.

Electroenzymatic Model System for the Determination of Catalytic Activity of Erwinia carotovora L-Asparaginase

An electrochemical method for the determination of the catalytic activity of L-asparaginase (ASNase) from Erwinia carotovora was proposed. Our approach is based on the electrooxidation of amino acids from L-asparaginase polypeptide backbones. The electrochemical behavior of ASNase on electrodes obtained by screen-printing modified with single-wall carbon nanotubes (SPE/SWCNTs) as sensing elements demonstrated a broad oxidation peak at 0.5–0.6 V centered at 0.531 ± 0.010 V. We have shown that in the presence of the substrate L-asparagine, the oxidation current of the enzyme was reduced in a concentration-dependent manner. The specificity of electrochemical analysis was confirmed in experiments with glycine, an amino acid with no substrate activity on ASNase and does not reduce the oxidation peak of L-asparaginase. The addition of glycine did not significantly influence the amplitude of the oxidation current. The innovative aspects of the proposed electrochemical sensor are the direct monitoring of ASNase catalytic activity and a reagentless approach, which does not require additional reagents or labels.

An interference-free new xanthine biosensor based on immobilized enzyme-nanogold conjugate on carbon nanotube doped poly(3,4-Ethylenedioxythiophene) composite film

A new design of biosensor based on polymeric nano(bio)composite has been proposed for the selective detection of xanthine to be used in the clinical analysis as well as food quality control. The xanthine oxidoreductase (XOR) gene ofPseudomonas aerogenosastrain CEBP1 wascloned to obtainpurifiedenzyme through affinity chromatography. fMWCNTdoped PEDOTwas electrodeposited on the working electrodeto enhance the sensitivity and selectivity of the biosensor. Bio-synthesized gold nanoparticles conjugated XOR (Au-XOR) was covalently immobilized on the polymeric nanocomposite. The enzymatic activity was enhanced 1.12 times with increased substrate affinity. The surface morphology and structural properties of the polymeric layer were investigated using SEM, FESEM, TEM. Electrochemical characteristics were performed by cyclic voltammetry, differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy. Xanthine was oxidized (pH 7.0) on the uniquely designed polymeric nano(bio)composite modified electrode at a lower anodic potential of + 0.446 V vs. Ag/AgCl (3 M NaCl)at optimized DPV conditions. The simple, newly designed Au-XOR/fMWCNT-PEDOT/GCE exhibited interference-free reproducibility and stability (∼4 months) with excellent sensitivity of 16.075 µA.µM^-1.cm^-2for the quantification of xanthine in biological samples such as blood, tissue, urine. The applicability of thebiosensor was validatedby comparing the sensing results for the real biological fluidic solutions with HPLC data (RE = 0.5-3.1%).

Architecture of a multi-channel and easy-to-make microfluidic paper-based colorimetric device (μPCD) towards selective and sensitive recognition of uric acid by AuNPs: an innovative portable tool for the rapid and low-cost identification of clinically relevant biomolecules

Uric acid (UA) is the end product of purine metabolism. Uric acid is usually excreted in the urine, but its abnormal increase and toxic amount can lead to diseases such as gout, hyperuricemia, Lesch-Nyhan syndrome, and cardiovascular disease. On the other hand, UA reduction can lead to neurodegenerative diseases such as sarcoma, glioblastoma, Hodgkin, and etc. Therefore, rapid identification of UA is of great importance. In this work, a simple, portable, inexpensive, and fast microfluidic paper-based colorimetric sensor based on the color change in the presence of UA by using AuNPs was developed. The results can be easily identified with naked eye and further confirmed by UV-vis spectrophotometry. In this method, iron pattern and fiberglass paper were used to construct diagnostic areas and hydrophilic microfluidic channels. We greatly reduced the preparation time of this pattern using a magnet (about three minutes). In this work, four types of nanoparticles with different lower limit of quantification (LLOQ) were used. Linear range of 10-6 to 10-3 M and LLOQ of 10-6 M were obtained for the determination of uric acid using AuNPs-CysA as optical probe. Also, by AuNPs as optical probe a linear range of 10-4 to 10-2 M and the obtained LLOQ was 10-4 M. Finally, by AuNFs as optical probe linear range from 10-6 to 10-2 M and 5 × 10-5 to 10-2 M along with LLOQ of 10-6 and 5 × 10-5 M, respectively. The designed system successfully studied in human urine samples.

Highly permselective uric acid detection using kidney cell membrane-functionalized enzymatic biosensors

Abnormal blood uric acid (UA) levels can lead to its crystallization in the joints, consequently resulting in gout. Accurate detection of UA in the blood is imperative for the early diagnosis of gout. However, electrochemical UA biosensors are vulnerable to antioxidants in the blood, limiting accurate UA detection. To address this issue, we focused on the function of uric acid transporter 1 (URAT1), which is selectively permeable to UA. URAT1 is abundant in the kidney cell membrane (KCM). To apply URAT1 to a sensor, we developed a KCM-coated UA biosensor (called the KCM sensor) that could selectively detect UA through URAT1. The KCM coating in the fabricated KCM sensor was verified via scanning electron microscopy, atomic force microscopy, and confocal microscopy. The KCM sensor enabled the detection of UA in the range of 0-1000 μM, with a limit of detection of 8.5 μM, suggesting that it allows the diagnosis of the early stages of gout. On the other hand, the UA permeability of the KCM sensor was significantly reduced in the presence of a URAT1 inhibitor, implying that URAT1 is a key factor for UA detection. The selectivity of the KCM sensor was demonstrated by measuring the amount for UA in the presence of various antioxidants. Finally, the KCM sensor was capable of measuring UA in human serum and was reproducible with 0.5-1.6% deviation. The UA permeability and selectivity of the KCM sensor were maintained even after 3 weeks of storage.

Dual-signal uric acid sensing based on carbon quantum dots and o-phenylenediamine

Fluorescent carbon quantum dots (CQDs), which showed excitation-dependent emission characteristics, were prepared using a facile hydrothermal method. The structure and optical properties of CQDs were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-Vis spectroscopy, and fluorescence spectroscopy. These CQDs also showed peroxidase-like activity and could catalyze the H₂O₂-mediated oxidation of o-phenylenediamine (OPD) to form 2,3-diaminophenazine (DAP) with an absorption peak at 420 nm. DAP exhibited an obvious fluorescence emission at 550 nm under the excitation of 360 nm. On the other hand, it decreased the fluorescence of CQDs at 450 nm via inner filter effect. The experimental results indicated that the H₂O₂ concentration affected the color of DAP and the fluorescence intensity of CQDs and DAP. Thus, a colorimetric and ratiometric fluorescence dual-signal method was established for measuring the concentrations of H₂O₂ and uric acid (UA). The effects of pH, incubation temperature, incubation time, and OPD concentration on the response were investigated. Under the conditions of pH 7.5, temperature 50 °C, incubation time 30 min, and OPD 1.5 mM, the absorbance and fluorescence intensity ratio responses were linearly dependent on UA concentration ranging from 5.0 μM to 100 μM. The limits of detection were 0.7 and 0.5 μM with a colorimetric method and ratiometric fluorescence method, respectively. More importantly, this dual responsive method has been applied to the determination of UA in urine samples with satisfactory results.

A 3D electrochemical biosensor based on Super-Aligned Carbon NanoTube array for point-of-care uric acid monitoring

Uric acid analysis is extremely important for gout prognosis, diagnosis and treatment. Previous technologies either lack specificity or exhibit poor performance, and thus could not meet the need of Point-of-Care (POC) uric acid monitoring. Here we present for the first time, a novel electrochemical biosensor based on 3D Super-Aligned Carbon NanoTube (SACNT) array to facilitate POC uric acid monitoring. The working electrode of the biosensor is composed of an orderly 3D SACNT array immobilized with uricase through a precipitation and crosslinking procedure. Such biosensor possesses a higher enzyme density, significantly larger contact area with reactants and could maintain the intact SACNT structure and its excellent conductivity after modification. The developed 3D SACNT array electrochemical biosensor benefits from high specific surface area, high electro-catalytic activity and large contact area with analytes, and demonstrates high sensitivity of 518.8 μA/(mM⋅cm²), wide linear range of 100-1000 μM and low limit of detection of 1 μM for uric acid. Dynamic uric acid monitoring has been achieved using the presented biosensor. And the obtained results in serum samples had no significant difference compared with those obtained using the FDA-approved electrochemical analyzer (Paired T-test, p > 0.05). These demonstrated that the technology can potentially be applied in POC monitoring of other biomolecules to improve prognosis, diagnosis and treatment outcomes of metabolic diseases.

A novel copper(i) metal–organic framework as a highly efficient and ultrasensitive electrochemical platform for detection of Hg(ii) ions in aqueous solution

A novel copper(i) metal–organic framework was constructed and used to modify a glassy carbon electrode, and exhibits excellent electrochemical sensing of Hg(ii) ions.

A highly sensitive uric acid electrochemical biosensor based on a nano-cube cuprous oxide/ferrocene/uricase modified glassy carbon electrode

A uric acid (UA) electrochemical biosensor was constructed using ferrocene (Fc) decorated cuprous oxide (Cu₂O) enhanced electro-active characteristics and covalently immobilized with uricase (UOx) on glassy carbon electrode (GCE). The electrochemical characteristics of the fabricated electrode was analysed by cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV). DPV studies revealed rapid response of fabricated electrode UOx/Fc/Cu₂O/GCE towards UA in a wide concentration range of 0.1–1,000 μM with a sensitivity of 1.900 μA mM⁻¹ cm⁻² and very low detection limit of 0.0596 μM. A very low magnitude Michaelis–Menten constant (Km) value was evaluated as 34.7351 μM which indicated the chemical attraction of the enzyme towards the UA was much higher. The developed biosensor was successfully applied to detect UA in human urine samples. Moreover, reproducibility and stability studies demonstrated the fabricated UOx/Fc/Cu₂O/GCE biosensor had high reproducibility with a RSD of 2.8% and good reusability with a RSD of 3.2%. Specificity studies results showed the fabricated biosensor had strong anti-interference ability. The improved sensor performance was attributed to the synergistic electronic properties of Cu₂O and Fc that provided enhances delectrocatalytic activity and electron transfer. The present biosensor can be extended for use in clinical settings.

Three coordination polymers with regulated coordination interactions as fluorescent sensors for monitoring purine metabolite uric acid

A facile optical sensor for uric acid (UA), an early pathological signature for the metabolic function of humans, was developed based on water-stable coordination polymers (CPs). Herein, three new isostructural fluorescent CPs, [Ln(TCPB)(DMF)3]n (Ln = La, CP 1; Ce, CP 2 and Pr, CP 3; H3TCPB = 1,3,5-tris(1-(2-carboxyphenyl)-1H-pyrazol-3-yl)benzene), with various metal ions were solvothermally synthesized. Significantly, by regulating the metal-organic coordination interactions, the fabricated CP 3 can quantitatively recognize UA with higher sensitivity compared with CP 1 and CP 2. The mechanism for the sensing properties further demonstrates the best performance of CP 3 and the excellent selectivity for UA monitoring. This work represents the strategy of designing fluorescent CP sensors to determine UA and provides a convenient approach for developing analysis platforms for the assessment of related disease progress and human health monitoring.

A simple electrochemical approach to fabricate functionalized MWCNT-nanogold decorated PEDOT nanohybrid for simultaneous quantification of uric acid, xanthine and hypoxanthine

Medical diagnostics and detection of food spoilage require estimation of hypoxanthine (HX), xanthine (XN), and uric acid (UA). A selective sensing platform has been proposed for simultaneous detection of all these species. Functionalized multi-walled carbon nanotube (fMWCNT) stabilized nanogold decorated PEDOT:TOS polymeric nanocomposite (Au-PEDOT-fMWCNT) was synthesized through rapid one-step electropolymerization to enhance conductivity and active surface area by several folds. Electrochemical activities of the proposed sensing platform were analyzed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS). Analyses through SEM, FESEM and TEM were performed to explore the surface morphology and elemental analysis of the polymeric nanohybrid was investigated by XPS, Raman, FTIR, XRD spectroscopy. Electro-catalysis of UA, XN and HX occurred at low oxidation potentials i.e. 0.082, 0.463 and 0.808 V, respectively in the optimized conditions. The uniquely designed simple, interference free Au-PEDOT-fMWCNT/GCE sensor exhibited high selectivity, good reproducibility, reusability (∼180 times) and stability (∼3 month) with excellent sensitivity of 1.73, 14.31 and 3.82 μA μM^-1 cm^-2 for UA, XN and HX, respectively. The sensor exhibited linear ranges of detection as 0.1-800, 0.05-175 and 0.1-150 μM with detection limits of 199.3, 24.1 and 90.5 nM for quantification of UA, XN and HX respectively. The performance of the proposed sensor was validated by addition of UA, XN and HX in human serum, urine and fish samples by comparing to those using HPLC. The results indicated good applicability of the proposed sensor for simultaneous detection of UA, XN, HX in real biological fluids.

Nanocatalysts Containing Direct Electron Transfer-Capable Oxidoreductases: Recent Advances and Applications

Direct electron transfer (DET)-capable oxidoreductases are enzymes that have the ability to transfer/receive electrons directly to/from solid surfaces or nanomaterials, bypassing the need for an additional electron mediator. More than 100 enzymes are known to be capable of working in DET conditions; however, to this day, DET-capable enzymes have been mainly used in designing biofuel cells and biosensors. The rapid advance in (semi) conductive nanomaterial development provided new possibilities to create enzyme-nanoparticle catalysts utilizing properties of DET-capable enzymes and demonstrating catalytic processes never observed before. Briefly, such nanocatalysts combine several cathodic and anodic catalysis performing oxidoreductases into a single nanoparticle surface. Hereby, to the best of our knowledge, we present the first review concerning such nanocatalytic systems involving DET-capable oxidoreductases. We outlook the contemporary applications of DET-capable enzymes, present a principle of operation of nanocatalysts based on DET-capable oxidoreductases, provide a review of state-of-the-art (nano) catalytic systems that have been demonstrated using DET-capable oxidoreductases, and highlight common strategies and challenges that are usually associated with those type catalytic systems. Finally, we end this paper with the concluding discussion, where we present future perspectives and possible research directions.

Detection of Purine Metabolite Uric Acid with Picolinic-Acid-Functionalized Metal-Organic Frameworks

Uric acid (UA) is a purine metabolite closely related to the metabolic function of human. Fluorescence analysis is a very effective method because of its high selectivity and sensitivity, but it still remains a great challenge for direct UA detection. In this work, a fluorescent sensor based on postfunctionalized metal-organic frameworks (UiO-PSM) was designed focusing on the direct detection of UA. UiO-PSM was synthesized from a zirconium-based metal-organic framework (UiO-66-NH₂) and 2-picolinic acid through an amidation reaction. Because UA could quench the fluorescence of UiO-PSM through coordination, hydrogen bonding, and π-π interactions, the sensor could detect UA directly. UiO-PSM exhibited the advantages of short reaction time, high selectivity, high sensitivity, and wide linear range for UA detection. This work provided a novel method for UA detection and had potential application values in clinical diagnosis.

Atomic matching catalysis to realize a highly selective and sensitive biomimetic uric acid sensor

A main challenge for biomimetic non-enzyme biosensors is to achieve high selectivity. Herein, an innovative biomimetic non-enzyme sensor for electrochemical detection of uric acid (UA) with high selectivity and sensitivity is realized by growing Prussian blue (PB) nanoparticles on nitrogen-doped carbon nanotubes (N-doped CNTs). The enhancement mechanism of the biomimetic UA sensor is proposed to be atomically matched active sites between two reaction sites (oxygen atoms of 2, 8-trione, 6.9 Å) of UA molecule and two redox centers (Fe^II on the diagonal, 7.2 Å) of PB. Such an atomically matching manner not only promotes strong adsorption of UA on PB but also selectively enhances electron transfer between reaction sites of UA and active Fe^II centers of PB. This biomimetic UA sensor can offer great selectivity to avoid interferences from other oxidative and reductive species, showing excellent selectivity. An electrochemical biomimetic sensor based on PB/N-doped CNTs was applied to in situ detect UA in human serum, delivering a wide dynamic detection range (0.001-1 mM) and a low detection limit (0.26 μM). This work provides a high-performance UA sensor while shedding a scientific light on using atomic matching catalysis to fabricate highly sensitive and selective biomimetic sensors.

Uricase grafted nanoconducting matrix based electrochemical biosensor for ultrafast uric acid detection in human serum samples

Gold nanoparticles decorated graphene oxide (Au-rGO) nanocomposite thin films with enhanced electro-active characteristics were prepared and covalently immobilized with uricase (UOx) enzyme for sensitive and selective detection of uric acid (UA). Differential pulse voltammetry (DPV) studies revealed rapid response of fabricated electrode towards UA at low potential (0.228 V) in a wide concentration range of 50-800 μM with a sensitivity of 86.62 ± 0.19 μA mM^-1 and very low detection limit of 7.32 ± 0.21 μM. The obtained Michaelis-Menten constant (k_m) value of 51.75 μM signifies high enzyme kinetics at electrode surface with UA. The developed biosensor was successfully applied to detect UA in human serum samples. Interferences due to components present in the real matrix were evaluated and UA determination in mixed sample was also performed. The fabricated UOx/Au-rGO/ITO biosensor demonstrated high reproducibility and a shelf-life of 6 months indicating the promising future of Au-rGO nanocomposite as an efficient transducer matrix for biosensing applications. The fast response time (1.0 ± 0.6 s) and improved sensor performance is attributed to the synergistic electronic properties of Au-nanoparticles and rGO that provided enhanced electron transfer and high electro-active species surface coverage at Au-rGO nanocomposite.

Electrochemical Detection for Uric Acid Based on β-Lactoglobulin-Functionalized Multiwall Carbon Nanotubes Synthesis with PtNPs Nanocomposite

In this work, a simple and highly selective electrochemical biosensor for determination of uric acid (UA) is synthesized by using β-lactoglobulin (BLG)-functionalized multiwall carbon nanotubes (MWCNTs) and a platinum nanoparticles (PtNPs) nanocomposite. Urate oxidase (UOx) can oxidize uric acid to hydrogen peroxide and allantoin, which provides a good opportunity for electrochemical detection for UA. Under the optimized conditions, the current changes by the UOx/Bull Serum Albumin (BSA)/BLG-MWCNTs-PtNPs/Glassy Carbon (GC) electrode with the electrochemical method was proportional to the concentration of UA. According to experiments, we obtained a linear response with a concentration range from 0.02 to 0.5 mM and achieved a high sensitivity of 31.131 μA mM⁻¹ and a low detection limit (0.8 μΜ). Meanwhile, nanoparticles improved the performance of the biosensor and combined with BLG not only prevented the accumulation of composite nanomaterials, but also provided immobilization of uricase through electrostatic adsorption. This improves the stability and gives the constructed electrode sensing interface superior performance in UA detection.

Harnessing a previously unidentified capability of bacterial allosteric transcription factors for sensing diverse small molecules in vitro

A plethora of bacterial allosteric transcription factors (aTFs) have been identified to sense a variety of small molecules. Introduction of a novel aTF-based approach to sense diverse small molecules in vitro will signify a broad series of detection applications. Here, we found that aTFs could interact with their nicked DNA binding sites. Building from this new finding, we designed and implemented a novel aTF-based nicked DNA template-assisted signal transduction system (aTF-NAST) by using the competition between aTFs and T4 DNA ligase to bind to the nicked DNA. This aTF-NAST could reliably and modularly transduce the signal of small molecules recognized by aTFs to the ligated DNA signal, thus enabling the small molecules to be measured via various mature and robust DNA detection methods. Coupling this aTF-NAST with three DNA detection methods, we demonstrated nine novel biosensors for the detection of an antiseptic 4-hydroxybenzoic acid, a disease marker uric acid and an antibiotic tetracycline. These biosensors show impressive sensitivity and robustness in real-life analysis, highlighting the great potential of our aTF-NAST for biosensing applications.

Design and synthesis of a novel lanthanide fluorescent probe (TbIII-dtpa-bis(2,6-diaminopurine)) and its application to the detection of uric acid in urine sample

In this study, a novel fluorescent probe, Tb^III-dtpa-bis(2,6-diaminopurine) (Tb-dtpa-bdap), is designed based on the principle of complementary base pairing and synthesized for uric acid detection. The synthesized fluorescent probe is characterized by ¹H NMR, ¹³C NMR, infra-red (IR) spectrum and ultraviolet-visible (UV-vis) spectra. It is found that the fluorescence of Tb-dtpa-bdap solution can be quenched obviously in the presence of uric acid. The affecting factors, including solution acidity, uric acid concentration and interfering substances, on the detection of uric acid using this probe are examined. Under optimized conditions, the fluorescence intensities of Tb-dtpa-bdap solution towards different uric acid concentrations show a linear response in the range from 1.00 × 10^-5 mol·L^-1 to 5.00 × 10^-5 mol·L^-1 with a linear correlation coefficient (R²) of 0.9877. And the obtained limit of detection (LOD) is about 5.80 × 10^-6 mol·L^-1, which is lower than the level of uric acid in actual urine. The mechanism on the detection of uric acid by using Tb-dtpa-bdap is inferred from the experimental results. The facts demonstrate that the proposed fluorescent probe can be successfully applied for the determination of uric acid in human urine samples.

Advances in the design of nanomaterial-based electrochemical affinity and enzymatic biosensors for metabolic biomarkers: A review

This review (with 340 refs) focuses on methods for specific and sensitive detection of metabolites for diagnostic purposes, with particular emphasis on electrochemical nanomaterial-based sensors. It also covers novel candidate metabolites as potential biomarkers for diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis. Following an introduction into the field of metabolic biomarkers, a first major section classifies electrochemical biosensors according to the bioreceptor type (enzymatic, immuno, apta and peptide based sensors). A next section covers applications of nanomaterials in electrochemical biosensing (with subsections on the classification of nanomaterials, electrochemical approaches for signal generation and amplification using nanomaterials, and on nanomaterials as tags). A next large sections treats candidate metabolic biomarkers for diagnosis of diseases (in the context with metabolomics), with subsections on biomarkers for neurodegenerative diseases, autism spectrum disorder and hepatitis. The Conclusion addresses current challenges and future perspectives. Graphical abstract This review focuses on the recent developments in electrochemical biosensors based on the use of nanomaterials for the detection of metabolic biomarkers. It covers the critical metabolites for some diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis.

CeO2-x/C/rGO nanocomposites derived from Ce-MOF and graphene oxide as a robust platform for highly sensitive uric acid detection

Developing suitable substrate materials is of significance in constructing electrochemical biosensors for fast and reliable quantification of molecules of chemical and biomedical interest. For practical applications, biosensors working at low negative potentials have the advantage of high selectivity and sensitivity. In this work, CeO_2-x/C/rGO nanocomposites have been synthesized through the pyrolysis of metal organic frameworks with graphene oxide. The CeO_2-x/C/rGO nanocomposites exhibit excellent catalytic properties towards H₂O₂, which is one of the uricase catalyzed intermediates at low working potentials due to the coexistence of Ce³⁺ and reduced graphene oxide (rGO). A novel biosensor based on the CeO_2-x/C/rGO nanocomposites has been developed and utilized for the detection of uric acid, an important molecule in the biological and medical fields. The biosensor based on the CeO_2-x/C/rGO nanocomposites presents a high sensitivity of 284.5 μA cm^-2 mM^-1 at -0.4 V (vs. SCE), a wide linear range between 49.8 and 1050.0 μM and a low detection limit of 2.0 μM. Moreover, it is found that the amperometric responses are free from interference of ascorbic acid and urea, which shows a great potential for practical applications.

Dual stimuli-responsive Fe3O4 graft poly(acrylic acid)-block-poly(2-methacryloyloxyethyl ferrocenecarboxylate) copolymer micromicelles: surface RAFT synthesis, self-assembly and drug release applications

BACKGROUND

Stimuli-responsive polymer materials are a new kind of intelligent materials based on the concept of bionics, which exhibits more significant changes in physicochemical properties upon triggered by tiny environment stimuli, hence providing a good carrier platform for antitumor drug delivery.

RESULTS

Dual stimuli-responsive Fe3O4 graft poly(acrylic acid)-block-poly(2-methacryloyloxyethyl ferrocenecarboxylate) block copolymers (Fe3O4-g-PAA-b-PMAEFC) were engineered and synthesized through a two-step sequential reversible addition-fragmentation chain transfer polymerization route. The characterization was performed by FTIR, 1H NMR, SEC, XRD and TGA techniques. The self-assembly behavior in aqueous solution upon triggered by pH, magnetic and redox stimuli was investigated via zeta potentials, vibration sample magnetometer, cyclic voltammetry, fluorescent spectrometry, dynamic light scattering, XPS, TEM and SEM measurements. The experimental results indicated that the Fe3O4-g-PAA-b-PMAEFC copolymer materials could spontaneously assemble into hybrid magnetic copolymer micromicelles with core-shell structure, and exhibited superparamagnetism, redox and pH stimuli-responsive features. The hybrid copolymer micromicelles were stable and nontoxic, and could entrap hydrophobic anticancer drug, which was in turn swiftly and effectively delivered from the drug-loaded micromicelles at special microenvironments such as acidic pH and high reactive oxygen species.

CONCLUSION

This class of stimuli-responsive copolymer materials is expected to find wide applications in medical science and biology, etc., especially in drug delivery system.

A redox-modulated fluorescent strategy for the highly sensitive detection of metabolites by using graphene quantum dots

In this paper, a redox-modulated fluorescent strategy based on the transformation of Fe²⁺/Fe³⁺ couple and enzymatic reaction for rapid monitoring glucose and uric acid using graphene quantum dots (GQDs) as fluorescent probe was developed. Hydrogen peroxide (H₂O₂) can be produced by the enzymatic reaction of a series of metabolites, such as glucose and uric acid. In the presence of hydrogen peroxide, Fe²⁺ can be oxidized and converted to Fe³⁺, which have a significant quenching difference in the fluorescence of graphene quantum dots (GQDs). Thus, a sensitive and label-free biosensor for the detection of uric acid and glucose was developed. Under the optimized experimental conditions, the fluorescence intensity was linearly correlated with the concentration of uric acid and glucose in the range of 0.1-45 μmolL^-1 and 0.1-30 μmolL^-1 with a detection limit of 0.026 μmolL^-1and 0.021 μmolL^-1, respectively. The proposed method was applied to the determination of uric acid and glucose in human serum samples with satisfactory results, which had potential application to detect metabolites associated with H₂O₂ release.

A platform for the development of novel biosensors by configuring allosteric transcription factor recognition with amplified luminescent proximity homogeneous assays

Using isolated allosteric transcription factors as recognition elements, a versatile platform was established in vitro to develop sensitive biosensors for the detection of various chemicals.

From mercury to nanosensors: Past, present and the future perspective of electrochemistry in pharmaceutical and biomedical analysis

Polarography was the first developed automated method of voltage-controlled electrolysis with dropping mercury electrode (DME). Then, hanging mercury drop and static mercury drop electrodes were added as an alternative indicator electrode. In this way, polarography turned formally into voltammetry with mercury electrodes in the electroreduction way. Solid electrodes such as noble metal and carbon based electrodes can be used for the investigation of the compounds for both oxidation and reduction directions, which is called voltammetry. The voltammetric and polarographic techniques are more sensitive, reproducible, and easily used electroanalytical methods that can be alternative to more frequently used separation and spectrometric methods. Furthermore, in some cases there is a relationship between voltammetry and pharmaceutical samples, and the knowledge of the mechanism of their electrode reactions can give a useful clue in elucidation of the mechanism of their interaction with living cells. The voltammetric and polarographic analysis of drugs in pharmaceutical preparations are by far the most common use of electrochemistry for analytical pharmaceutical problems. Recent trends and challenges in the electrochemical methods for the detection of DNA hybridization and pathogens are available. Low cost, small sample requirement and possibility of miniaturization justifies their increasing development.