The current provided by oxygen-reducing microbial cathodes is related to the composition of their bacterial community

Pseudomonas xiamenensis in the cutting fluids on corrosion behavior of aluminum alloy 2219

Aluminum alloy workpieces are prone to black spots and other corrosion problems in the cutting process, which greatly puzzles the machining industry and brings serious losses. However, the cause and mechanism of workpiece corrosion are still unclear. In this study, the effect of P. xiamenensis breeding in the cutting fluid on the corrosion of aluminum alloy 2219 (AA 2219) was studied by corrosion product characterization, biofilm evaluation, corrosion profile, quantitative pit analysis, and electrochemical characterization. The results showed that P. xiamenensis adhered to the surface of AA 2219, forming uneven corrosion product film and biofilm. The state of the film on the surface of the aluminum alloy changed, and pitting corrosion intensified after being immersed in cutting fluid containing P. xiamenensis. The maximum corrosion depths of the coupons were found to be 2.7 μm and 15.8 μm in sterile and inoculated cutting fluids, respectively. The corrosion rate of the aluminum alloy was as high as 9.16 × 10^-3 mm/y, which was about 9 times higher than the corrosion rate in the microbial-free cutting fluid. The presence of a P. xiamenensis biofilm accelerated the formation of the water-soluble corrosion product Al(OH)₄^-, which destroyed the passive film and accelerated pitting corrosion.

Aerobic biocathodes with potential regulation for ammonia oxidation with concomitant cathodic oxygen reduction and their microbial communities

Aerobic biocathodes are effective construct for the simultaneous nitrification and denitrification, but the disturbance of cathodic oxygen reduction on ammonia oxidation and denitrification remains unclear. In this study, we revealed the oxygen reduction peak at -0.4 V (versus silver/silver chloride) by cyclic voltammetry analysis at a cathode without a biofilm. The reduction peak, however, showed a right shift from -0.4 to -0.3 V for the biocathode, indicating that the aerobic biocathode could simultaneously perform traditional nitrification and cathode oxygen reduction. Therefore, different electrode potentials ranging from -0.5 to -0.1 V were designed for regulating the ammonia oxidation rate, and the results showed that the highest oxidation rate reached 3.08 mg/h/L at a potential of -0.2 V under a low-aeration rate of 5 mL/min. High-throughput sequencing showed that Nitrosomonas and Rhodococcus were the dominant nitrogen removal genera in the biocathode, and the abundance of Devosia was related to the interactions between the aeration rate and the electrode potential. Furthermore, the amoC and hao genes responded to aeration and electrode potential regulation, and -0.2 V was more suitable for promoting the denitrification process under low-aeration conditions. Therefore, these findings provided new insights on cathodic potential control for ammonia oxidation and nitrogen removal as well as for the regulation of microbial communities.

Hypersaline microbial fuel cell equipped with an oxygen-reducing microbial cathode

Microbial anodes and oxygen reducing microbial cathodes were designed separately under constant polarization at + 0.1 V/SCE in a hypersaline medium (NaCl 45 g/L). They were then associated to design two-compartment microbial fuel cells (MFCs). These MFCs produced up to 209 ± 24 mW m^-2 during a week. This was the first demonstration that hypersaline MFCs equipped with microbial cathodes can produce power density at this level. Desulfuromonas sp. were confirmed to be key species of the anodes. The efficiency of the cathodes was linked to the development of a redox system centred at + 0.2 V/SCE and to the presence of Gammaproteobacteria (Alteromonadales and Oceanospirillales), especially an unclassified order phylogenetically linked to the genus Thioalobacter. Comparing the different performance of the four MFCs with the population analyses suggested that polarization at + 0.1 V/SCE should be maintained longer to promote the growth of Thioalobacter on the cathode and thus increase the MFC performance.

Catalysis of the electrochemical oxygen reduction reaction (ORR) by animal and human cells

Animal cells from the Vero lineage and MRC5 human cells were checked for their capacity to catalyse the electrochemical oxygen reduction reaction (ORR). The Vero cells needed 72 hours’ incubation to induce ORR catalysis. The cyclic voltammetry curves were clearly modified by the presence of the cells with a shift of ORR of 50 mV towards positive potentials and the appearance of a limiting current (59 μA.cm^-2). The MRC5 cells induced considerable ORR catalysis after only 4 h of incubation with a potential shift of 110 mV but with large experimental deviation. A longer incubation time, of 24 h, made the results more reproducible with a potential shift of 90 mV. The presence of carbon nanotubes on the electrode surface or pre-treatment with foetal bovine serum or poly-D-lysine did not change the results. These data are the first demonstrations of the capability of animal and human cells to catalyse electrochemical ORR. The discussion of the possible mechanisms suggests that these pioneering observations could pave the way for electrochemical biosensors able to characterize the protective system of cells against oxidative stress and its sensitivity to external agents.

Long-Term Fertilization Shapes the Putative Electrotrophic Microbial Community in Paddy Soils Revealed by Microbial Electrosynthesis Systems

Electrotrophs play an important role in biogeochemical cycles, but the effects of long-term fertilization on electrotrophic communities in paddy soils remain unclear. Here, we explored the responses of electrotrophic communities in paddy soil-based microcosms to different long-term fertilization practices using microbial electrosynthesis systems (MESs), high-throughput quantitative PCR, and 16s rRNA gene-based Illumina sequencing techniques. Compared to the case in the unfertilized soil (CK), applications of only manure (M); only chemical nitrogen, phosphorous, and potassium fertilizers (NPK); and M plus NPK (MNPK) clearly changed the electrotrophic bacterial community structure. The Streptomyces genus of the Actinobacteria phylum was the dominant electrotroph in the CK, M, and MNPK soils. The latter two soils also favored Truepera of Deinococcus-Thermus or Arenimonas and Thioalkalispira of Proteobacteria. Furthermore, Pseudomonas of Proteobacteria and Bacillus of Firmicutes were major electrotrophs in the NPK soil. These electrotrophs consumed biocathodic currents coupled with nitrate reduction and recovered 18-38% of electrons via dissimilatory nitrate reduction to ammonium (DNRA). The increased abundances of the nrfA gene for DNRA induced by electrical potential further supported that the electrotrophs enhanced DNRA for all soils. These expand our knowledge about the diversity of electrotrophs and their roles in N cycle in paddy soils and highlight the importance of fertilization in shaping electrotrophic communities.

Oxygen-reducing microbial cathodes in hypersaline electrolyte

Hypersaline electrolytes offer a way to boost the development of microbial fuel cells by overcoming the issue due to the low conductivity of the usual media. Efficient halotolerant bioanodes have already been designed but O₂-reducing cathodes remain a strong bottleneck. Here, O₂-reducing biocathodes were designed by using salt marsh sediment as the inoculum and a hypersaline media (45 g/L NaCl) of high conductivity (10.4 S m^-1). Current density up to 2.2 A m^-2 was reached from potential of +0.2 V/SCE. The efficiency of the biocathodes was correlated to the presence of Gammaproteobacteria strain(s) related to Thiohalobacter thiocyanaticus, which were considerably enriched in the best performing biocathodes. This work opens up new perspectives to overcome the O₂ reduction issue in hypersaline MFCs by designing efficient halotolerant microbial cathodes and pointing out the strains that should now be focused to improve them.

Inhibitory effect of cadmium(II) ion on anodic electrochemically active biofilms performance in bioelectrochemical systems

Cadmium(II) ion can affect the anode performance of bioelectrochemical systems (BES); however, how the presence of Cd²⁺ affect the extracellular electron transfer of anodic electrochemically active biofilms (EABs), the microbial viability and species composition of microorganism on the anode remain poorly understood. Here, we investigated the inhibitory effect of Cd²⁺ at different concentrations on the electrochemical performance and the biofilm community in mixed-culture enriched BES. The electrochemical performance of the BES was not inhibited at 2 mg L^-1 Cd²⁺, while higher concentrations of 5-20 mg L^-1 resulted in the decrease in the maximum power density, with 0.34 ± 0.01 W m^-2 at 5 mg L^-1, 0.28 ± 0.01 W m^-2 at 10 mg L^-1, and 0.17 ± 0 W m^-2 at 20 mg L^-1, respectively. When adding 30 mg/L Cd²⁺, there was almost no power output. The decline of the power output was possibly ascribed to the suppressed viability and the change of species richness as evident from confocal laser scanning microscopy and microbial community analysis. Cyclic voltammogram and electrochemical impedance spectroscopy revealed that high concentration of Cd²⁺ exceeding 5 mg L^-1 can inhibit the secretion of outer membrane cytochromes, thus reducing the electron transfer between the EABs and the anode surface. Analysis of bacterial structures showed a decrease in Geobacter accompanied by an increase in Stenotrophomonas and Azospira in response to Cd²⁺ at 10 and 20 mg L^-1. This study added to the in-depth analysis of the inhibition of Cd²⁺ on EABs, and provided new insights into the removing Cd²⁺ and organics simultaneously in BES.

Oxygen Reduction Reaction Electrocatalysts Derived from Iron Salt and Benzimidazole and Aminobenzimidazole Precursors and Their Application in Microbial Fuel Cell Cathodes

In this work, benzimidazole (BZIM) and aminobenzimidazole (ABZIM) were used as organic-rich in nitrogen precursors during the synthesis of iron-nitrogen-carbon (Fe-N-C) based catalysts by sacrificial support method (SSM) technique. The catalysts obtained, denoted Fe-ABZIM and Fe-BZIM, were characterized morphologically and chemically through SEM, TEM, and XPS. Moreover, these catalysts were initially tested in rotating ring disk electrode (RRDE) configuration, resulting in similar high electrocatalytic activity toward oxygen reduction reaction (ORR) having low hydrogen peroxide generated (<3%). The ORR performance was significantly higher compared to activated carbon (AC) that was the control. The catalysts were then integrated into air-breathing (AB) and gas diffusion layer (GDL) cathode electrode and tested in operating microbial fuel cells (MFCs). The presence of Fe-N-C catalysts boosted the power output compared to AC cathode MFC. The AB-type cathode outperformed the GDL type cathode probably because of reduced catalyst layer flooding. The highest performance obtained in this work was 162 ± 3 μWcm^-2. Fe-ABZIM and Fe-BZIM had similar performance when incorporated to the same type of cathode configuration. Long-term operations show a decrease up to 50% of the performance in two months operations. Despite the power output decrease, the Fe-BZIM/Fe-ABZIM catalysts gave a significant advantage in fuel cell performance compared to the bare AC.

Influence of reflux ratio on two-stage anoxic/oxic with MBR for leachate treatment: Performance and microbial community structure

A lab-scale two-stage Anoxic/Oxic with MBR (AO/AO-MBR) system was operated for 81 days for leachate treatment with different reflux ratio (R). The best system performances were observed with a R value of 150%, and the average removal efficiencies of chemical oxygen demand, ammonia and total nitrogen were 85.6%, 99.1%, and 77.6%, respectively. The microbial community were monitored and evaluated using high-throughput sequencing. Proteobacteria were dominant in all process. Phylogenetic trees were described at species level, genus Thiopseudomonas, Amaricoccus, Nitrosomonas and Nitrobacter played significant roles in nitrogen removal. Co-occurrence analyzing top 20 genera showed that Nitrosomonas-Nitrobacter presented perfect positive relationship, as well as Paracoccus-Brevundimonas and Pusillimonas-Halobacteriovorax.

Enhanced oxygen reducing biocathode electroactivity by using sediment extract as inoculum

Autotrophic bacteria are able to catalyze cathodic oxygen reduction as a renewable and sustainable inexpensive catalyst. However, the performance of biocathode varied over reactors, and we still not know how inoculums affect this system. Using three different inoculum of wastewater (WW), sediment extract (SE) and soil extract (SO) in parallel reactors, we found that SE achieved the shortest setup time (17-25% shorter) as well as the highest power density compared to those of SO and WW. Cyclic voltammetry (CV) further revealed that the current densities of SE biocathodes (100±1A/m³) was 150% and 67% higher than those of WW biocathodes (40±1A/m³) and SO biocathodes (65±1A/m³). Community analysis showed the selective pressure on biocathode facilitated the growth of Proteobacteria, Bacteroidetes, Firmicutes and Actinobacteria families. Different from WW and SO biocathodes, Nitrospirae was selectively enriched in SE biocathodes, corresponding to an obvious increase in Unidentified Nitrospiraceae population at genus level, which may play an important role on the cathodic electroactivity. These results confirmed that sediment extract is a better bacteria source than soil and wastewater for the acclimation of autotrophic electroactive bacteria, and the community comparison provided broader knowledge on biocathode microbiology.

Biocathodes reducing oxygen at high potential select biofilms dominated by Ectothiorhodospiraceae populations harboring a specific association of genes

Biocathodes polarized at high potential are promising for enhancing Microbial Fuel Cell performances but the microbes and genes involved remain poorly documented. Here, two sets of five oxygen-reducing biocathodes were formed at two potentials (-0.4V and +0.1V vs. saturated calomel electrode) and analyzed combining electrochemical and metagenomic approaches. Slower start-up but higher current densities were observed at high potential and a distinctive peak increasing over time was recorded on cyclic voltamogramms, suggesting the growth of oxygen reducing microbes. 16S pyrotag sequencing showed the enrichment of two operational taxonomic units (OTUs) affiliated to Ectothiorodospiraceae on high potential electrodes with the best performances. Shotgun metagenome sequencing and a newly developed method for the identification of Taxon Specific Gene Annotations (TSGA) revealed Ectothiorhodospiraceae specific genes possibly involved in electron transfer and in autotrophic growth. These results give interesting insights into the genetic features underlying the selection of efficient oxygen reducing microbes on biocathodes.

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

To improve the performance of microbial fuel cells (MFCs), the biocathode electrode material of double-chamber was optimized. Alongside the basic carbon fiber brush, three carbon materials namely graphite granules, activated carbon granules (ACG) and activated carbon powder, were added to the cathode-chambers to improve power generation. The result shows that the addition of carbon materials increased the amount of available electroactive microbes on the electrode surface and thus promote oxygen reduction rate, which improved the generation performance of the MFCs. The Output current (external resistance = 1000 Ω) greatly increased after addition of the three carbon materials and maximum power densities in current stable phase increased by 47.4, 166.1, and 33.5%, respectively. Additionally, coulombic efficiencies of the MFC increased by 16.3, 64.3, and 20.1%, respectively. These results show that MFC when optimized with ACG show better power generation, higher chemical oxygen demands removal rate and coulombic efficiency.

Multi-system Nernst-Michaelis-Menten model applied to bioanodes formed from sewage sludge

Bioanodes were formed under constant polarization at -0.2 V/SCE from fermented sewage sludge. Current densities reached were 9.3±1.2 A m(-2) with the whole fermented sludge and 6.2±0.9 A m(-2) with the fermented sludge supernatant. The bioanode kinetics was analysed by differentiating among the contributions of the three redox systems identified by voltammetry. Each system ensured reversible Nernstian electron transfer but around a different central potential. The global overpotential required to reach the maximum current plateau was not imposed by slow electron transfer rates but was due to the potential range covered by the different redox systems. The microbial communities of the three bioanodes were analysed by 16S rRNA gene pyrosequencing. They showed a significant microbial diversity around a core of Desulfuromonadales, the proportion of which was correlated with the electrochemical performance of the bioanodes.