A new peroxidase from leaves of guinea grass ( Panicum maximum ): A potential biocatalyst to build amperometric biosensors

Glyoxal crosslinking of electro-responsive alginate-based hydrogels: Effects on the properties

To improve the features of alginate-based hydrogels in physiological conditions, Ca2+-crosslinked semi-interpenetrated hydrogels formed by poly(3,4-ethylenedioxythiophene):polystyrene sulfonic acid and alginate (PEDOT/Alg) were subjected to a treatment with glyoxal to form a dual ionic/covalent network. The covalent network density was systematically varied by considering different glyoxalization times (tG). The content of Ca2+ was significantly higher for the untreated hydrogel than for the glyoxalized ones, while the properties of the hydrogels were found to largely depend on tG. The porosity and swelling capacity decreased with increasing tG, while the stiffness and electrical conductance retention capacity increased with tG. The potentiodynamic response of the hydrogels notably depended on the amount of conformational restraints introduced by the glyoxal, which is a very short crosslinker. Thus, the re-accommodation of the polymer chains during the cyclic potential scans became more difficult with increasing number of covalent crosslinks. This information was used to improve the performance of untreated PEDOT/Alg as electrochemical sensor of hydrogen peroxide by simply applying a tG of 5 min. Overall, the control of the properties of glyoxalized hydrogels through tG is very advantageous and can be used as an on-demand strategy to improve the performance of such materials depending on the application.

Synthesis and Characterization of Cross-Linked Aggregates of Peroxidase from Megathyrsus maximus (Guinea Grass) and Their Application for Indigo Carmine Decolorization

We present the synthesis of a cross-linking enzyme aggregate (CLEAS) of a peroxidase from Megathyrsus maximus (Guinea Grass) (GGP). The biocatalyst was produced using 50%v/v ethanol and 0.88%w/v glutaraldehyde for 1 h under stirring. The immobilization yield was 93.74% and the specific activity was 36.75 U mg-1. The biocatalyst surpassed by 61% the free enzyme activity at the optimal pH value (pH 6 for both preparations), becoming this increase in activity almost 10-fold at pH 9. GGP-CLEAS exhibited a higher thermal stability (2-4 folds) and was more stable towards hydrogen peroxide than the free enzyme (2-3 folds). GGP-CLEAS removes over 80% of 0.05 mM indigo carmine at pH 5, in the presence of 0.55 mM H2O2 after 60 min of reaction, a much higher value than when using the free enzyme. The operational stability showed a decrease of enzyme activity (over 60% in 4 cycles), very likely related to suicide inhibition.

Biosensor based on bimetallic/graphene composite for non-enzymatic detection of hydrogen peroxide in living tumor cells

A highly sensitive electrochemical biosensor was manufactured with triple synergistic catalysis to detect hydrogen peroxide (H₂ O₂ ). In this study, a highly sensitive biosensor based on Prussian blue-chitosan/graphene-hemin nanomaterial/platinum and palladium nanoparticles (PB-CS/HGNs/Pt&Pd biosensor) was fabricated for the detection of H₂ O₂ . The materials described above were modified on the electrode surface and applied to catalyze the breakdown of hydrogen peroxide. The current response of the biosensor presented a linear relationship with H₂ O₂ concentration from 6 × 10^-2 to 20 μM (R² = 0.9766) and with the logarithm of H₂ O₂ concentration from 20 to 9×10³  μM (R² = 0.9782), the low detection limit of 25 nM was obtained at the signal/noise (S/N) ratio of 3. Besides, the biosensor showed an outstanding anti-interference ability and acceptable reproducibility. PB-CS/HGNs/Pt&Pd electrodes are effective in measuring H₂ O₂ from living tumor cells, which implies that the biosensor has the potential to assess reactive oxygen species in various living tumor cells.

Sensitive Detection of Hydroxytyrosol in Extra Virgin Olive Oils with a Novel Biosensor Based on Single-Walled Carbon Nanotubes and Tyrosinase

Hydroxytyrosol (HT) is an important marker for the authenticity and quality assessment of extra virgin olive oils (EVOO). The aim of the study was the qualitative and quantitative determination of hydroxytyrosol in commercial extra virgin olive oils of different origins and varieties using a newly developed biosensor based on a screen-printed electrode modified with single-layer carbon nanotubes and tyrosinase (SPE-SWCNT-Ty). The enzyme was immobilized on a carbon-based screen-printed electrode previously modified with single-layer carbon nanotubes (SPE-SWCNT-Ty) by the drop-and-dry method, followed by cross-linking with glutaraldehyde. The modified electrode surface was characterized by different methods, including electrochemical (cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS)) and spectrometric (Fourier transform infrared (FTIR) spectroscopy) methods. Cyclic voltammetry was used for the quantitative determination of HT, obtaining a detection limit of 3.49 × 10⁻⁸ M and a quantification limit of 1.0 × 10⁻⁷ M, with a wide linearity range (0.49–15.602 µM). The electrochemical performance of the SPE-SWCNT-Ty biosensor was compared with that of the modified SPE-SWCNT sensor, and the results showed increased selectivity and sensitivity of the biosensor due to the electrocatalytic activity of tyrosinase. The results obtained from the quantitative determination of HT showed that commercial EVOOs contain significant amounts of HT, proving the high quality of the finished products. The determination of the antiradical activity of HT was carried out spectrophotometrically using the free reagent galvinoxyl. The results showed that there is a very good correlation between the antiradical capacity of EVOOs, the voltammetric response and implicitly the increased concentration of HT. SPE-SWCNT-Ty has multiple advantages such as sensitivity, selectivity, feasibility and low cost and could be used in routine analysis for quality control of food products such as vegetable oils.

Tyrosinase-Based Biosensor-A New Tool for Chlorogenic Acid Detection in Nutraceutical Formulations

The purpose of our research was to develop a new enzymatic biosensor, GPH-MnPc-Tyr/SPE, using as a support screen-printed carbon electrode (SPE) modified with graphene, manganese phthalocyanine, and tyrosinase, with the aim of developing sensitive detection of chlorogenic acid (CGA). To immobilise tyrosinase on the sensor surface, crosslinking with the glutaraldehyde technique was used, thus increasing the enzyme bioactivity on this electrode. The modified electrode has a great catalytic effect on the electrochemical redox of chlorogenic acid, compared to the simple, unmodified SPE. The peak current response of the biosensor for CGA was linear in the range of 0.1-10.48 μM, obtaining a calibration curve using cyclic voltammetry (CV) and square-wave voltammetry (SWV). Subsequently, the detection limit (LOD) and the quantification limit (LOQ) were determined, obtaining low values, i.e., LOD = 1.40 × 10^-6 M; LOQ = 4.69 × 10^-6 M by cyclic voltammetry and LOD = 2.32 × 10^-7 M; LOQ = 7.74 × 10^-7 M, by square-wave voltammetry (SWV). These results demonstrate that the method is suitable for the detection of CGA in nutraceutical formulations. Therefore, GPH-MnPc-Tyr/SPE was used for the quantitative determination of CGA in three products, by means of cyclic voltammetry. The Folin-Ciocalteu spectrophotometric assay was used for the validation of the results, obtaining a good correlation between the voltammetric method and the spectrophotometric one, at a confidence level of 95%. Moreover, by means of the DPPH method, the antioxidant activity of the compound was determined, thus demonstrating the antioxidant effect of CGA in all nutraceuticals studied.

Development of a Novel Electrochemical Biosensor Based on Carbon Nanofibers-Cobalt Phthalocyanine-Laccase for the Detection of p-Coumaric Acid in Phytoproducts

The present paper developed a new enzymatic biosensor whose support is a screen-printed electrode based on carbon nanofibers modified with cobalt phthalocyanine and laccase (CNF-CoPc-Lac/SPE) to determine the p-coumaric acid (PCA) content by cyclic voltammetry and square wave voltammetry. Sensor modification was achieved by the casting and cross-linking technique, using glutaraldehyde as a reticulation agent. The biosensor’s response showed the PCA redox processes in a very stable and sensitive manner. The calibration curve was developed for the concentration range of p-coumaric acid of 0.1–202.5 μM, using cyclic voltammetry and chronoamperometry. The biosensor yielded optimal results for the linearity range 0.4–6.4 μM and stood out by low LOD and LOQ values, i.e., 4.83 × 10⁻⁷ M and 1.61 × 10⁻⁶ M, respectively. PCA was successfully determined in three phytoproducts of complex composition. The results obtained by the voltammetric method were compared to the ones obtained by the FTIR method. The amount of p-coumaric acid determined by means of CNF-CoPc-Lac/SPE was close to the one obtained by the standard spectrometric method.

Electrocatalysis by Heme Enzymes—Applications in Biosensing

Heme proteins take part in a number of fundamental biological processes, including oxygen transport and storage, electron transfer, catalysis and signal transduction. The redox chemistry of the heme iron and the biochemical diversity of heme proteins have led to the development of a plethora of biotechnological applications. This work focuses on biosensing devices based on heme proteins, in which they are electronically coupled to an electrode and their activity is determined through the measurement of catalytic currents in the presence of substrate, i.e., the target analyte of the biosensor. After an overview of the main concepts of amperometric biosensors, we address transduction schemes, protein immobilization strategies, and the performance of devices that explore reactions of heme biocatalysts, including peroxidase, cytochrome P450, catalase, nitrite reductase, cytochrome c oxidase, cytochrome c and derived microperoxidases, hemoglobin, and myoglobin. We further discuss how structural information about immobilized heme proteins can lead to rational design of biosensing devices, ensuring insights into their efficiency and long-term stability.

Development of a Novel Electrochemical Biosensor Based on Carbon Nanofibers-Gold Nanoparticles-Tyrosinase for the Detection of Ferulic Acid in Cosmetics

The present paper deals with the electrochemical behavior of three types of sensors based on modified screen-printed electrodes (SPEs): a sensor based on carbon nanofibers (CNF/SPE), a sensor based on nanofibers of carbon modified with gold nanoparticles (CNF-GNP/SPE) and a biosensor based on nanofibers of carbon modified with gold nanoparticles and tyrosinase (CNF-GNP-Ty/SPE). To prepare the biosensor, the tyrosinase (Ty) was immobilized on the surface of the electrode already modified with carbon nanofibers and gold nanoparticles, by the drop-and-dry technique. The electrochemical properties of the three electrodes were studied by cyclic voltammetry in electroactive solutions, and the position and shape of the active redox peaks are according to the nature of the materials modifying the electrodes. In the case of ferulic acid, a series of characteristic peaks were observed, the processes being more intense for the biosensor, with the higher sensitivity and selectivity being due to the immobilization of tyrosinase, a specific enzyme for phenolic compounds. The calibration curve was subsequently created using CNF-GNP-Ty/SPE in ferulic acid solutions of various concentrations in the range 0.1-129.6 μM. This new biosensor allowed low values of the detection threshold and quantification limit, 2.89 × 10-9 mol·L-1 and 9.64 × 10-9 mol·L-1, respectively, which shows that the electroanalytical method is feasible for quantifying ferulic acid in real samples. The ferulic acid was quantitatively determined in three cosmetic products by means of the CNF-GNP-Ty/SPE biosensor. The results obtained were validated by means of the spectrometric method in the infrared range, the differences between the values of the ferulic acid concentrations obtained by the two methods being under 5%.

Immobilization of Low-Cost Alternative Vegetable Peroxidase (Raphanus sativus L. peroxidase): Choice of Support/Technique and Characterization

In the present work the radish (Raphanus sativus L.) was used as the low-cost alternative source of peroxidase. The enzyme was immobilized in different supports: coconut fiber (CF), calcium alginate microspheres (CAMs) and silica SBA-15/albumin hybrid (HB). Physical adsorption (PA) and covalent binding (CB) as immobilization techniques were evaluated. Immobilized biocatalysts (IBs) obtained were physicochemical and morphologically characterized by SEM, FTIR and TGA. Also, optimum pH/temperature and operational stability were determined. For all supports, the immobilization by covalent binding provided the higher immobilization efficiencies-immobilization yield (IY%) of 89.99 ± 0.38% and 77.74 ± 0.42% for HB and CF, respectively. For CAMs the activity recovery (AR) was of 11.83 ± 0.68%. All IBs showed optimum pH at 6.0. Regarding optimum temperature of the biocatalysts, HB-CB and CAM-CB maintained the original optimum temperature of the free enzyme (40 °C). HB-CB showed higher operational stability, maintaining around 65% of the initial activity after four consecutive cycles. SEM, FTIR and TGA results suggest the enzyme presence on the IBs. Radish peroxidase immobilized on HB support by covalent binding is promising in future biotechnological applications.

A novel peroxidase from runner bean (Phaseolus coccineus L.): Enhanced affinity purification, characterization, and dye decolorization activity

In this study, a novel runner bean peroxidase (RBP) was purified and characterized. Affinity-based purification was performed with newly synthesized disubstituted 4-aminobenzohydrazides. In the purification results, 253-fold was achieved with a yield of 56.2%. Furthermore, molecular weight and enzyme purity were checked with the SDS-PAGE and observed a single band at 31.2 kDa. Optimum conditions were determined as temperature = 50°C, ionic strength = 0.2 M, and pH 7.0. Enzyme exhibited 31.2% of residual activity in the presence of 20% DMSO. Additionally, the redox-mediated decolorization effect of the enzyme was examined for Reactive Blue 19 and Acid Blue 25 dyes. As a result of 1-hr incubation, the enzyme removal activity of Reactive Blue 19 and Acid Blue 25 dyes was calculated as 47% and 57%, respectively. PRACTICAL APPLICATIONS: Peroxidases (PODs) ability to catalyze various redox reactions for many substrates makes them significant enzymes in industrial sectors. In our current report, a single-step strategy was developed and followed as an alternative to multi-step methods commonly used for the purification of PODs. During this process, high yield was achieved and the separation time was shortened. Also, the purification of RBP that can potentially supplant PODs used in the industrial applications was carried out for the first time. In addition, substrate specificity, catalytic behavior in water-miscible organic solvents, and dye bleaching activity of this enzyme have been determined to evaluate the utilization capacity in various processes.

Electrochemical Sensor Based on Prussian Blue Electrochemically Deposited at ZrO2 Doped Carbon Nanotubes Glassy Carbon Modified Electrode

In this work, a new hydrogen peroxide (H₂O₂) electrochemical sensor was fabricated. Prussian blue (PB) was electrodeposited on a glassy carbon (GC) electrode modified with zirconia doped functionalized carbon nanotubes (ZrO₂-fCNTs), (PB/ZrO₂-fCNTs/GC). The morphology and structure of the nanostructured system were characterized by scanning and transmission electron microscopy (TEM), atomic force microscopy (AFM), specific surface area, X-ray diffraction (XRD), thermogravimetric analysis (TGA), Raman and Fourier transform infrared (FTIR) spectroscopy. The electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (CA). Zirconia nanocrystallites (6.6 ± 1.8 nm) with cubic crystal structure were directly synthesized on the fCNTs walls, obtaining a well dispersed distribution with a high surface area. The experimental results indicate that the ZrO₂-fCNTs nanostructured system exhibits good electrochemical properties and could be tunable by enhancing the modification conditions and method of synthesis. The fabricated sensor could be used to efficiently detect H₂O₂, presenting a good linear relationship between the H₂O₂ concentration and the peak current, with quantification limit (LQ) of the 10.91 μmol·L^-1 and detection limit (LD) of 3.5913 μmol·L^-1.

Peroxide Electrochemical Sensor and Biosensor Based on Nanocomposite of TiO2 Nanoparticle/Multi-Walled Carbon Nanotube Modified Glassy Carbon Electrode

A hydrogen peroxide (H₂O₂) sensor and biosensor based on modified multi-walled carbon nanotubes (CNTs) with titanium dioxide (TiO₂) nanostructures was designed and evaluated. The construction of the sensor was performed using a glassy carbon (GC) modified electrode with a TiO₂–CNT film and Prussian blue (PB) as an electrocalatyzer. The same sensor was also employed as the basis for H₂O₂ biosensor construction through further modification with horseradish peroxidase (HRP) immobilized at the TiO₂–fCNT film. Functionalized CNTs (fCNTs) and modified TiO₂–fCNTs were characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), and X-Ray DifFraction (XRD), confirming the presence of anatase over the fCNTs. Depending on the surface charge, a solvent which optimizes the CNT dispersion was selected: dimethyl formamide (DMF) for fCNTs and sodium dodecylsulfate (SDS) for TiO₂–fCNTs. Calculated values for the electron transfer rate constant (ks) were 0.027 s⁻¹ at the PB–fCNT/GC modified electrode and 4.7 × 10⁻⁴ s⁻¹ at the PB–TiO₂/fCNT/GC electrode, suggesting that, at the PB–TiO₂/fCNT/GC modified electrode, the electronic transfer was improved. According to these results, the PB–fCNT/GC electrode exhibited better Detection Limit (LD) and Quantification Limit (LQ) than the PB–TiO₂/fCNT/GC electrode for H₂O₂. However, the PB film was very unstable at the potentials used. Therefore, the PB–TiO₂/fCNT/GC modified electrode was considered the best for H₂O₂ detection in terms of operability. Cyclic Voltammetry (CV) behaviors of the HRP–TiO₂/fCNT/GC modified electrodes before and after the chronoamperometric test for H₂O₂, suggest the high stability of the enzymatic electrode. In comparison with other HRP/fCNT-based electrochemical biosensors previously described in the literature, the HRP–fCNTs/GC modified electrode did not show an electroanalytical response toward H₂O₂.

Detección electroquímica de peróxido de hidrógeno usando peroxidasa de pasto Guinea (Panicum maximum) inmovilizada sobre electrodos serigrafiados de puntos cuánticos

Los biosensores electroquímicos son herramientas analíticas de rápida y confiable respuesta que han adquirido especial interés en los últimos años gracias a la posibilidad de integrar biomoléculas con electrodos hechos a base de materiales nanométricos. En este trabajo se desarrolló un biosensor electroquímico para detección de peróxido de hidrógeno (H2O2) usando peroxidasa de pasto Guinea (PPG) inmovilizada sobre electrodos serigrafiados de puntos cuánticos (ESPC). La PPG fue aislada y parcialmente purificada a partir de hojas de pasto Guinea con una actividad específica de 602 U mg-1. Posteriormente, la PPG fue inmovilizada sobre la superficie del ESPC mediante adsorción física y el estudio del comportamiento electroquímico fue llevado a cabo mediante voltamperometría cíclica y cronoamperometría. La PPG reveló una pareja bien definida de señales redox a 17 mV/-141 mV correspondientes al proceso redox del grupo hemo (Fe2+/Fe3+) de las peroxidasas. La reducción bioelectrocatalítica del peróxido de hidrógeno se observó a un potencial redox de -645 mV vs Ag. Este proceso fue controlado por difusión de las especies en la superficie del electrodo en un rango de velocidad de barrido lineal de 50-500 mV/s. La cronoamperometría permitió la construcción de curvas de calibración entre la corriente de reducción y la concentración del H2O2 para la determinación de parámetros analíticos como sensibilidad, rango lineal y nivel mínimo de detección. El desarrollo de este biosensor amperométrico se convierte en un paso preliminar para la construcción de un dispositivo portátil y de respuesta rápida para el análisis de H2O2 en muestras de interés ambiental y biomédico.