Investigation of the chemical mechanisms involved in the electropulsation of membranes at the molecular level

Real-time imaging of individual electropores proves their longevity in cells

With over 50 years of electroporation research, the nature of cell membrane permeabilization remains elusive. The lifetime of electropores in molecular models is limited to nano- or microseconds, whereas the permeabilization of electroporated cells can last minutes. This study aimed at resolving a longstanding debate on whether the prolonged permeabilization is due to the formation of long-lived pores in cells. We developed a method for dynamic monitoring and conductance measurements of individual electropores. This was accomplished by time-lapse total internal reflection fluorescence (TIRF) imaging in HEK cells loaded with CAL-520 dye and placed on an indium tin oxide (ITO) surface. Applying a 1-ms, 0 to -400 mV pulse between the patch pipette and ITO evoked focal Ca2+ transients that identified individual electropores. Some transients disappeared in milliseconds but others persisted for over a minute. Persistent transients ("Ca2+ plumes") faded over time to a stable or a randomly fluctuating level that could include periods of full quiescence. Single pore conductance, measured by 0 to -50 mV, 50 ms steps at 30 and 60 s after the electroporation, ranged from 80 to 200 pS. These experiments proved electropore longevity in cells, in stark contrast to molecular simulations and many findings in lipid bilayers.

Molecular dynamics simulation of the transmembrane transport process of reactive species under the synergistic effect of plasma oxidation and an electric field

Cold atmospheric pressure plasma (CAP)-assisted cancer therapy has become a popular topic in plasma biomedical research. Membrane lipid oxidation and local electric fields are two important factors in plasma-cell interactions, and the study of their synergistic effect is highly significant for optimizing the regulatory mechanism of the plasma-induced apoptosis of cancer cells. In this paper, a model of oxidized phospholipids was established, and the transmembrane process of reactive species was simulated by the classical molecular dynamics (MD) method under the conditions of oxidation and an electric field. The results showed that hydrophilic reactive oxygen species could not penetrate the membrane lipids through oxidation. The formation of electroporation provided a new channel for reactive species to penetrate the membrane, and the oxidation effect reduced the electric field threshold of membrane electroporation. Our simulation could provide theoretical support for the plasma-induced apoptosis of cancer cells at the microscopic level, provide mechanistic guidance for the practical application of plasma-induced cancer therapy, and promote the development of CAP in the field of cancer therapy.

The role of lipid oxidation on electrical properties of planar lipid bilayers and its importance for understanding electroporation

Electroporation is a useful tool for the manipulation with the cell membrane permeability. Underlying physicochemical processes taking place at the molecular level during electroporation are relatively well studied. However, various processes remain unknown, one of them is lipid oxidation, a chain reaction that causes degradation of lipids, and might explain the long-lasting membrane permeability after the electric field has ceased. The aim of our study was to observe the differences in the electrical properties of planar lipid bilayers, as in vitro cell membrane models, due to lipid oxidation. Phospholipids were chemically oxidized and oxidation products were analysed using mass spectrometry. Electrical properties, resistance R (Ω) and capacitance C (F) were measured using an LCR meter. Using a previously developed measuring device, a linear increasing signal was applied to a stable bilayer in order to measure its breakdown voltage U_br (V) and lifetime t_br (µs). We observed an increase in conductance and capacitance of the oxidized planar lipid bilayers when compared to their non-oxidized counterparts. With increasing lipid oxidation, the core of the bilayer becomes more polar, and consequently more permeable. Our findings can explain the long-lasting permeability of the cell membrane after electroporation.

Phase-field model of bilipid membrane electroporation

This paper proposes a new model of membrane electropermeabilisation that combines the water content of the membrane and the transmembrane voltage. Interestingly, thanks to a well defined free-energy of the membrane, we somehow generalise the seminal approach of Chizmadzhev, Weaver and Krassowska, getting rid of the geometrical cylindrical assumption upon which most of the current electroporation models are based. Our approach is physically relevant and we recover a surface diffusion equation of the lipid phase proposed by Leguèbe et al. in a previous phenomenological model. We also perform a fine analysis of the involved nonlocal operators in two simple configurations (a spherical membrane and a flat periodic membrane) that enables us to compare the time constants of the phenomenon in spherical and flat membranes. An accurate splitting scheme combined with Fast Fourier Transforms is developed for efficient computations of the model. Our numerical results enable us to make a link between the molecular dynamics simulations of membrane permeabilisation and the experimental observations on vesicles and cells.

Characterization of Experimentally Observed Complex Interplay between Pulse Duration, Electrical Field Strength, and Cell Orientation on Electroporation Outcome Using a Time-Dependent Nonlinear Numerical Model

Electroporation is a biophysical phenomenon involving an increase in cell membrane permeability to molecules after a high-pulsed electric field is applied to the tissue. Currently, electroporation is being developed for non-thermal ablation of cardiac tissue to treat arrhythmias. Cardiomyocytes have been shown to be more affected by electroporation when oriented with their long axis parallel to the applied electric field. However, recent studies demonstrate that the preferentially affected orientation depends on the pulse parameters. To gain better insight into the influence of cell orientation on electroporation with different pulse parameters, we developed a time-dependent nonlinear numerical model where we calculated the induced transmembrane voltage and pores creation in the membrane due to electroporation. The numerical results show that the onset of electroporation is observed at lower electric field strengths for cells oriented parallel to the electric field for pulse durations ≥10 µs, and cells oriented perpendicular for pulse durations ~100 ns. For pulses of ~1 µs duration, electroporation is not very sensitive to cell orientation. Interestingly, as the electric field strength increases beyond the onset of electroporation, perpendicular cells become more affected irrespective of pulse duration. The results obtained using the developed time-dependent nonlinear model are corroborated by in vitro experimental measurements. Our study will contribute to the process of further development and optimization of pulsed-field ablation and gene therapy in cardiac treatments.

Advances in pulsed electric stimuli as a physical method for treating liquid foods

There is a need for alternative technologies that can deliver safe and nutritious foods at lower costs as compared to conventional processes. Pulsed electric field (PEF) technology has been utilised for a plethora of different applications in the life and physical sciences, such as gene/drug delivery in medicine and extraction of bioactive compounds in food science and technology. PEF technology for treating liquid foods involves engineering principles to develop the equipment, and quantitative biochemistry and microbiology techniques to validate the process. There are numerous challenges to address for its application in liquid foods such as the 5-log pathogen reduction target in food safety, maintaining the food quality, and scale up of this physical approach for industrial integration. Here, we present the engineering principles associated with pulsed electric fields, related inactivation models of microorganisms, electroporation and electropermeabilization theory, to increase the quality and safety of liquid foods; including water, milk, beer, wine, fruit juices, cider, and liquid eggs. Ultimately, we discuss the outlook of the field and emphasise research gaps.

Gene Electrotransfer into Mammalian Cells Using Commercial Cell Culture Inserts with Porous Substrate

Gene electrotransfer is one of the main non-viral methods for intracellular delivery of plasmid DNA, wherein pulsed electric fields are used to transiently permeabilize the cell membrane, allowing enhanced transmembrane transport. By localizing the electric field over small portions of the cell membrane using nanostructured substrates, it is possible to increase considerably the gene electrotransfer efficiency while preserving cell viability. In this study, we expand the frontier of localized electroporation by designing an electrotransfer approach based on commercially available cell culture inserts with polyethylene-terephthalate (PET) porous substrate. We first use multiscale numerical modeling to determine the pulse parameters, substrate pore size, and other factors that are expected to result in successful gene electrotransfer. Based on the numerical results, we design a simple device combining an insert with substrate containing pores with 0.4 µm or 1.0 µm diameter, a multiwell plate, and a pair of wire electrodes. We test the device in three mammalian cell lines and obtain transfection efficiencies similar to those achieved with conventional bulk electroporation, but at better cell viability and with low-voltage pulses that do not require the use of expensive electroporators. Our combined theoretical and experimental analysis calls for further systematic studies that will investigate the influence of substrate pore size and porosity on gene electrotransfer efficiency and cell viability.

Electrochemotherapy: An Alternative Strategy for Improving Therapy in Drug-Resistant SOLID Tumors

Simple Summary

Chemotherapy is becoming an increasingly difficult antitumor therapy to practice due to the multiple mechanisms of drug resistance. To overcome the problem, it is possible to use alternative techniques, such as electrochemotherapy, which involves the simultaneous administration of the electrical pulse (electroporation) and the treatment with the drug in order to improve the effectiveness of the drug against the tumor. Electroporation has improved the efficacy of some chemotherapeutic agents, such bleomycin, cisplatin, mitomycin C, and 5-fluorouracil. The results of in vitro, veterinary, and clinical oncology studies are promising on various cancers, such as metastatic melanoma. The purpose of this review is to give an update on the state of the art of electrochemotherapy against the main solid tumors in the preclinical, clinical, and veterinary field.

Abstract

Electrochemotherapy (ECT) is one of the innovative strategies to overcome the multi drug resistance (MDR) that often occurs in cancer. Resistance to anticancer drugs results from a variety of factors, such as genetic or epigenetic changes, an up-regulated outflow of drugs, and various cellular and molecular mechanisms. This technology combines the administration of chemotherapy with the application of electrical pulses, with waveforms capable of increasing drug uptake in a non-toxic and well tolerated mechanical system. ECT is used as a first-line adjuvant therapy in veterinary oncology, where it improves the efficacy of many chemotherapeutic agents by increasing their uptake into cancer cells. The chemotherapeutic agents that have been enhanced by this technique are bleomycin, cisplatin, mitomycin C, and 5-fluorouracil. After their use, a better localized control of the neoplasm has been observed. In humans, the use of ECT was initially limited to local palliative therapy for cutaneous metastases of melanoma, but phase I/II studies are currently ongoing for several histotypes of cancer, with promising results. In this review, we described the preclinical and clinical use of ECT on drug-resistant solid tumors, such as head and neck squamous cell carcinoma, breast cancer, gynecological cancer and, finally, colorectal cancer.

Identification of electroporation sites in the complex lipid organization of the plasma membrane

The plasma membrane of a biological cell is a complex assembly of lipids and membrane proteins, which tightly regulate transmembrane transport. When a cell is exposed to strong electric field, the membrane integrity becomes transiently disrupted by formation of transmembrane pores. This phenomenon termed electroporation is already utilized in many rapidly developing applications in medicine including gene therapy, cancer treatment, and treatment of cardiac arrhythmias. However, the molecular mechanisms of electroporation are not yet sufficiently well understood; in particular, it is unclear where exactly pores form in the complex organization of the plasma membrane. In this study, we combine coarse-grained molecular dynamics simulations, machine learning methods, and Bayesian survival analysis to identify how formation of pores depends on the local lipid organization. We show that pores do not form homogeneously across the membrane, but colocalize with domains that have specific features, the most important being high density of polyunsaturated lipids. We further show that knowing the lipid organization is sufficient to reliably predict poration sites with machine learning. Additionally, by analysing poration kinetics with Bayesian survival analysis we show that poration does not depend solely on local lipid arrangement, but also on membrane mechanical properties and the polarity of the electric field. Finally, we discuss how the combination of atomistic and coarse-grained molecular dynamics simulations, machine learning methods, and Bayesian survival analysis can guide the design of future experiments and help us to develop an accurate description of plasma membrane electroporation on the whole-cell level. Achieving this will allow us to shift the optimization of electroporation applications from blind trial-and-error approaches to mechanistic-driven design.

Biological effects of ultrashort electric pulses in a neuroblastoma cell line: the energy density role

BACKGROUND

Despite the numerous literature results about biological effects of electromagnetic field (EMF) exposure, the interaction mechanisms of these fields with organisms are still a matter of debate. Extremely low frequency (ELF) MFs can modulate redox homeostasis and we showed that 24 h exposure to 50 Hz-1 mT has a pro-oxidant effect and effects on the epigenome of SH-SY5Y cells, decreasing miR-34b/c expression through the hypermethylation of their promoter.

METHODS

Here, we investigated the role of the electromagnetic deposited energy density (ED) during exposures lasting 24 h to 1 mT amplitude MFs at a frequency of 50 Hz in inducing the above mentioned effects. To this end, we delivered ultrashort electric pulses, in the range of microsecond and nanosecond duration, with the same ED of the previously performed magnetic exposure to SH-SY5Y cells. Furthermore, we explored the effect of higher deposited energy densities. Analysis of i) gene and microRNA expression, ii) cell morphology, iii) reactive oxygen species (ROS) generation, and iv) apoptosis were carried out.

RESULTS

We observed significant changes in egr-1 and c-fos expression at very low deposited ED levels, but no change of the ROS production, miR-34b/c expression, nor the appearance of indicators of apoptosis. We thus sought investigating changes in egr-1 and c-fos expression caused by ultrashort electric pulses at increasing deposited ED levels. The pulses with the higher deposited ED caused cell electroporation and even other morphological changes such as cell fusion. The changes in egr-1 and c-fos expression were more intense, but, again, no change of the ROS production, miR-34b/c expression, nor apoptosis induction was observed.

CONCLUSIONS

These results, showing that extremely low levels of electric stimulation (never investigated until now) can cause transcriptional changes, also reveal the safety of the electroporating pulses used in biomedical applications and open up the possibility to further therapeutic applications of this technology.

The Evidence of the Bystander Effect after Bleomycin Electrotransfer and Irreversible Electroporation

One of current applications of electroporation is electrochemotherapy and electroablation for local cancer treatment. Both of these electroporation modalities share some similarities with radiation therapy, one of which could be the bystander effect. In this study, we aimed to investigate the role of the bystander effect following these electroporation-based treatments. During direct CHO-K1 cell treatment, cells were electroporated using one 100 µs duration square wave electric pulse at 1400 V/cm (for bleomycin electrotransfer) or 2800 V/cm (for irreversible electroporation). To evaluate the bystander effect, the medium was taken from directly treated cells after 24 h incubation and applied on unaffected cells. Six days after the treatment, cell viability and colony sizes were evaluated using the cell colony formation assay. The results showed that the bystander effect after bleomycin electrotransfer had a strong negative impact on cell viability and cell colony size, which decreased to 2.8% and 23.1%, respectively. On the contrary, irreversible electroporation induced a strong positive bystander effect on cell viability, which increased to 149.3%. In conclusion, the results presented may serve as a platform for further analysis of the bystander effect after electroporation-based therapies and may ultimately lead to refined application of these therapies in clinics.

Aluminum particles generated during millisecond electric pulse application enhance adenovirus-mediated gene transfer in L929 cells

Gene electrotransfer is an attractive method of non-viral gene delivery. However, the mechanism of DNA penetration across the plasma membrane is widely discussed. To explore this process for even larger structures, like viruses, we applied various combinations of short/long and high/low-amplitude electric pulses to L929 cells, mixed with a human adenovirus vector expressing GFP. We observed a transgene expression increase, both in the number of GFP-converted cells and GFP levels, when we added a low-voltage/millisecond-pulse treatment to the adenovirus/cell mixture. This increase, reflecting enhanced virus penetration, was proportional to the applied electric field amplitude and pulse number, but was not associated with membrane permeabilization, nor to direct cell modifications. We demonstrated that this effect is mainly due to adenovirus particle interactions with aggregated aluminum particles released from energized electrodes. Indeed, after centrifugation of the pulsed viral suspension and later on addition to cells, the activity was found mainly associated with the aluminum aggregates concentrated in the lower fraction and was proportional to generated quantities. Overall, this work focused on the use of electrotransfer to facilitate the adenovirus entry into cell, demonstrating that modifications of the penetrating agent can be more important than modifications of the target cell for transfer efficacy.

On the Coupling between Mechanical Properties and Electrostatics in Biological Membranes

Cell membrane structure is proposed as a lipid matrix with embedded proteins, and thus, their emerging mechanical and electrostatic properties are commanded by lipid behavior and their interconnection with the included and absorbed proteins, cytoskeleton, extracellular matrix and ionic media. Structures formed by lipids are soft, dynamic and viscoelastic, and their properties depend on the lipid composition and on the general conditions, such as temperature, pH, ionic strength and electrostatic potentials. The dielectric constant of the apolar region of the lipid bilayer contrasts with that of the polar region, which also differs from the aqueous milieu, and these changes happen in the nanometer scale. Besides, an important percentage of the lipids are anionic, and the rest are dipoles or higher multipoles, and the polar regions are highly hydrated, with these water molecules forming an active part of the membrane. Therefore, electric fields (both, internal and external) affects membrane thickness, density, tension and curvature, and conversely, mechanical deformations modify membrane electrostatics. As a consequence, interfacial electrostatics appears as a highly important parameter, affecting the membrane properties in general and mechanical features in particular. In this review we focus on the electromechanical behavior of lipid and cell membranes, the physicochemical origin and the biological implications, with emphasis in signal propagation in nerve cells.

Molecular dynamics simulations of the effects of lipid oxidation on the permeability of cell membranes

The formation of transient pores in their membranes is a well-known mechanism of permeabilization of cells exposed to high-intensity electric pulses. However, the formation of such pores is not able to explain all aspects of the so-called electroporation phenomenon. In particular, the reasons for sustained permeability of cell membranes, persisting long after the pulses' application, remain elusive. The complete resealing of cell membranes takes indeed orders of magnitude longer than the time for electropore closure as reported from molecular dynamics (MD) investigations. Lipid peroxidation has been suggested as a possible mechanism to explain the sustainable permeability of cell membranes. However, theoretical investigations of membrane lesions containing excess amounts of hydroperoxides have shown that the conductivities of such lesions were not high enough to account for the experimental measurements. Here, expanding on these studies, we investigate quantitatively the permeability of cell membrane lesions that underwent secondary oxidation. MD simulations and free energy calculations of lipid bilayers show that such lesions provide a better model of post-pulse permeable and conductive electropermeabilized cells. These results are further discussed in the context of sonoporation and ferroptosis, respectively a procedure and a phenomenon, among others, in which, alike electroporation, substantial lipid oxidation might be triggered.

The role of ESCRT-III and Annexin V in the repair of cell membrane permeabilization by the nanosecond pulsed electric field

Exposure of living cells to intense nanosecond pulsed electric field (nsPEF) increases membrane permeability to small solutes, presumably by the formation of nanometer-size membrane lesions. Mechanisms responsible for the restoration of membrane integrity over the course of minutes after nsPEF have not been identified. This study explored if ESCRT-III and Annexin V calcium-dependent repair mechanisms, which play critical role in resealing large membrane lesions, are also activated by electroporation and contribute to the membrane resealing. The extent of membrane damage and the time course of resealing were monitored by the time-lapse imaging of propidium (Pr) uptake in human cervical carcinoma (HeLa) cells exposed to trains of 300-ns PEF. The removal of the extracellular Ca²⁺ slowed down the resealing, although did not prevent it. Recruitment of CHMP4B protein, a component of ESCRT-III complex, to the electroporated plasma membrane was not observed, thus providing no evidence for possible contribution of the macro-vesicle shedding mechanism. In contrast, silencing the AnxA5 gene impaired resealing and reduced the viability of nsPEF-treated cells. We conclude that Annexin V but not ESCRT-III was involved in the repair of HeLa cells permeabilized by 300-ns stimuli, but it was not the only and perhaps not the main repair mechanism.

Oxidative Effects during Irreversible Electroporation of Melanoma Cells-In Vitro Study

Irreversible electroporation (IRE) is today used as an alternative to surgery for the excision of cancer lesions. This study aimed to investigate the oxidative and cytotoxic effects the cells undergo during irreversible electroporation using IRE protocols. To do so, we used IRE-inducing pulsed electric fields (PEFs) (eight pulses of 0.1 ms duration and 2-4 kV/cm intensity) and compared their effects to those of PEFs of intensities below the electroporation threshold (eight pulses, 0.1 ms, 0.2-0.4 kV/cm) and the PEFs involving elongated pulses (eight pulses, 10 ms, 0.2-0.4 kV/cm). Next, to follow the morphology of the melanoma cell membranes after treatment with the PEFs, we analyzed the permeability and integrity of their membranes and analyzed the radical oxygen species (ROS) bursts and the membrane lipids' oxidation. Our data showed that IRE-induced high cytotoxic effect is associated both with irreversible cell membrane disruption and ROS-associated oxidation, which is occurrent also in the low electric field range. It was shown that the viability of melanoma cells characterized by similar ROS content and lipid membrane oxidation after PEF treatment depends on the integrity of the membrane system. Namely, when the effects of the PEF on the membrane are reversible, aside from the high level of ROS and membrane oxidation, the cell does not undergo cell death.

Changes in the packing of bilayer lipids triggered by electroporation: real-time measurements on cells in suspension

Electropermeabilization of the cell membrane is a technique used to facilitate penetration of impermeant molecules into cells. Although there are studies regarding the mechanism of processes occurring after electropermeabilization, the relationship between electropermeabilization and associated phenomena (e.g. generation of reactive oxygen species, endocytosis, lipid peroxidation, etc.) is yet to be elucidated. This work aimed to get information on the changes in the packing of the bilayer lipids and their peroxidation induced by application of electroporation pulses. We used a specially designed system of electrodes which allowed performing electropermeabilization of cells in suspension simultaneously with time-dependent measurements of fluorescence and temperature. The kinetics of membrane packing and production of reactive oxygen species were studied using various conductivity buffers (0.01, 0.04 and 0.14 S/m) and different number of 1 kV/cm bipolar pulses (1-50). Two categories of effects were observed: a thermal effect, consisting in an increased bilayer disorder (a deeper penetration of water into the hydrophobic core), and a nonthermal effect, leading to a higher degree of lipids packing, the latter being attributed to a peroxidation process. An analysis of the permeabilization conditions in which one of these two processes predominates was performed.

Eradication of Saccharomyces cerevisiae by Pulsed Electric Field Treatments

One of the promising technologies that can inactivate microorganisms without heat is pulsed electric field (PEF) treatment. The aim of this study was to examine the influence of PEF treatment (2.9 kV cm⁻¹, 100 Hz, 5000 pulses in trains mode of 500 pulses with a pulse duration of 10 µs) on Saccharomyces cerevisiae eradication and resealing in different conditions, such as current density (which is influenced by the medium conductivity), the sort of medium (phosphate buffered saline (PBS) vs. yeast malt broth (YMB) and a combined treatment of PEF with the addition of preservatives. When the S. cerevisiae were suspended in PBS, increasing the current density from 0.02 to 3.3 A cm⁻² (corresponding to a total specific energy of 22.04 to 614.59 kJ kg⁻¹) led to an increase of S. cerevisiae eradication. At 3.3 A cm⁻², a total S. cerevisiae eradication was observed. However, when the S. cerevisiae in PBS was treated with the highest current density of 3.3 A cm⁻², followed by dilution in a rich YMB medium, a phenomenon of cell membrane resealing was observed by flow cytometry (FCM) and CFU analysis. The viability of S. cerevisiae was also examined when the culture was exposed to repeating PEF treatments (up to four cycles) with and without the addition of preservatives. This experiment was performed when the S. cerevisiae were suspended in YMB containing tartaric acid (pH 3.4) and ethanol to a final concentration of 10% (v/v), which mimics wine. It was shown that one PEF treatment cycle led to a reduction of 1.35 log10, compared to 2.24 log10 when four cycles were applied. However, no synergic effect was observed when the preservatives, free SO₂, and sorbic acid were added. This study shows the important and necessary knowledge about yeast eradication and membrane recovery processes after PEF treatment, in particular for application in the liquid food industry.

3D Printed Microneedle Array for Electroporation

In-vitro transfection of cells by electroporation is a widely used approach in cell biology and medicine. The transfection method is highly dependent on the cell culture's electrical resistance, which is strongly determined by differences in the membranes, but also on the morphology of the electrodes. Microneedle (MN)-based electrodes have been used to concentrate the electrical field during electroporation, and therefore maximize its effect on cell membrane permeability. So far, the methods used for the fabrication of MN electrodes have been relatively limited with respect to the needle design. In this work, we provide a method to fabricate MNs using 3D printing, which is a technology that provides a high degree of flexibility with respect to geometry and dimensions. Pyramidal-shaped MN designs were fabricated and tested on HCT116 cancer cells. Customization of the tips of the pyramids permits tailoring of the electrical field in the vicinity of the cell membranes. The fabricated device enables low-voltage (2 V) electroporation, eliminating the need for the use of specialized chemical buffers. The results show the potential of this method, which can be exploited and optimized for many different applications, and offer a very accessible approach for in-vitro electroporation and cell studies. The MNs can be customized to create complex structures, for example, for a multi-culture cell environment.

Estimation of the parameters of the Smoluchowski equation describing the occurrence of pores in a bilayer lipid membrane under soft poration

The conductive lipid pores occurring in planar bilayer membranes are known to manifest themselves experimentally as current fluctuations. Reliable recording of such fluctuations during phase transitions, as well as in membranes with various additives (for example, SDS), allows one to determine the characteristics of hypothetical hydrophilic pores, namely, their number, sizes, lifetimes, and duration of time intervals between pores. Because, in contrast with electroporation, the emergence of pores in a membrane does not require high voltages, this process is called soft poration. Studying the characteristics of pores under soft poration allows us to estimate the parameters of the Smoluchowski equation and compare them with the corresponding parameters used to describe electroporation. In this work, the experimental characteristics of current fluctuations in the membrane with the addition of SDS to the bulk solution were used to estimate the parameters of the Smoluchowski equation: the pore edge tension, the energy of the hydrophobic pore/hydrophilic pore barrier, the coefficient of pore diffusion in the radius space, the initial distribution density of the number of pores, and the attempt rate density of the lipids in a membrane. The obtained estimates are close to the parameter values used in studies of electroporation.

Electro-chemo-mechanical model to investigate multi-pulse electric-field-driven integrin clustering

The effect of pulsed electric fields (PEFs) on transmembrane proteins is not fully understood; how do chemo-mechanical cues in the microenvironment mediate the electric field sensing by these proteins? To answer this key gap in knowledge, we have developed a kinetic Monte Carlo statistical model of the integrin proteins that integrates three components of the morphogenetic field (i.e., chemical, mechanical, and electrical cues). Specifically, the model incorporates the mechanical stiffness of the cell membrane, the ligand density of the extracellular environment, the glycocalyx stiffness, thermal Brownian motion, and electric field induced diffusion. The effects of both steady-state electric fields and transient PEF pulse trains on integrin clustering are studied. Our results reveal that electric-field-driven integrin clustering is mediated by membrane stiffness and ligand density. In addition, we explore the effects of PEF pulse-train parameters (amplitude, polarity, and pulse-width) on integrin clustering. In summary, we demonstrate a computational methodology to incorporate experimental data and simulate integrin clustering when exposed to PEFs for time-scales comparable to experiments (seconds-minutes). Thus, we propose a blueprint for understanding PEF/electric field effects on protein induced signaling and highlight key impediments to incorporating experimental values into computational models such as the kinetic Monte Carlo method.

Dynamics of Cell Membrane Permeabilization by Saponins Using Terahertz Attenuated Total Reflection

Understanding the relevant parameters of the formation of pores during permeabilization is very challenging for medical applications. Several components are involved: the arrival of the permeabilizing molecules to the membrane, the efficiency of formation of the pores and their specific dynamics, and the flux of molecules through the plasma membrane. Using attenuated total reflection in the terahertz domain, we studied the dynamics of Madine-Darby canine kidney cells after permeabilization by saponin molecules. We developed an analytical model taking into account saponin molecule diffusion, cell geometry, cytosol molecule diffusion, and pore dynamics. We also studied the effect of possible pore overlapping on the cell membrane, introducing a dimensionless quantity that is the ratio between overlapping and diffusive effects. Pores are found to be static within 1 h after their creation, hinting that the diffusion of the saponin molecules to the membrane is the limiting factor in our experiments.

Enhancing Cell Viability and Efficiency of Plasmid DNA Electrotransfer Through Reducing Plasma Membrane Permeabilization

Background

Pulsed electric field has been widely used to facilitate molecular cargo transfer into cells. However, the cell viability is often decreased when trying to increase the electrotransfer efficiency. We hypothesize that the decrease is due to electropermeabilization of cell membrane that disrupts homeostasis of intracellular microenvironment. Thus, a reduction in the membrane permeabilization may increase the cell viability.

Materials and Methods

Different compounds were supplemented into the pulsing buffer prior to electrotransfer for reduction of cell membrane damage. Extent of the damage was quantified by leakiness of the membrane to a fluorescent dye, calcein, preloaded into cells. At 24 hours post electrotransfer, cell viability and electrotransfer efficiency were quantified with flow cytometry.

Results

The cell viability could be substantially increased by supplementation of either type B gelatin or bovine serum albumin (BSA), without compromising the electrotransfer efficiency. The supplementation also decreased the amount of calcein leaking out of the cells, suggesting that the improvement in cell viability was due to the reduction in electrotransfer-induced membrane damage.

Conclusion

Data from the study demonstrate that type B gelatin and BSA can be used as inexpensive supplements for improving cell viability in electrotransfer.

Monitoring the molecular composition of live cells exposed to electric pulses via label-free optical methods

The permeabilization of the live cells membrane by the delivery of electric pulses has fundamental interest in medicine, in particular in tumors treatment by electrochemotherapy. Since underlying mechanisms are still not fully understood, we studied the impact of electric pulses on the biochemical composition of live cells thanks to label-free optical methods: confocal Raman microspectroscopy and terahertz microscopy. A dose effect was observed after cells exposure to different field intensities and a major impact on cell peptide/protein content was found. Raman measurements reveal that protein structure and/or environment are modified by the electric pulses while terahertz measurements suggest a leakage of proteins and other intracellular compounds. We show that Raman and terahertz modalities are a particularly attractive complement to fluorescence microscopy which is the reference optical technique in the case of electropermeabilization. Finally, we propose an analytical model for the influx and efflux of non-permeant molecules through transiently (electro)permeabilized cell membranes.

Electroporation does not affect human dermal fibroblast proliferation and migration properties directly but indirectly via the secretome

Aesthetic wound healing is often experienced by patients after electrochemotherapy. We hypothesized that pulsed electric fields applied during electrochemotherapy (ECT) or gene electrotransfer (GET) protocols could stimulate proliferation and migration of human cutaneous cells, as described in protocols for electrostimulation of wound healing. We used videomicroscopy to monitor and quantify in real time primary human dermal fibroblast behavior when exposed in vitro to ECT and GET electric parameters, in terms of survival, proliferation and migration in a calibrated scratch wound assay. Distinct electric field intensities were applied to allow gradient in cell electropermeabilization while maintaining reversible permeabilization conditions, in order to mimic in vivo heterogeneous electric field distribution of complex tissues. Neither galvanotaxis nor statistical modification of fibroblast migration were observed in a calibrated scratch wound assay after application of ECT and GET parameters. The only effect on proliferation was observed under the strongest GET conditions, which drastically reduced the number of fibroblasts through induction of mitochondrial stress and apoptosis. Finally, we found that 24 h-conditioned cell culture medium by electrically stressed fibroblasts tended to increase the migration properties of cells that were not exposed to electric field. RT-qPCR array indicated that several growth factor transcripts were strongly modified after electroporation.

Combination Treatment with Cold Physical Plasma and Pulsed Electric Fields Augments ROS Production and Cytotoxicity in Lymphoma

New approaches in oncotherapy rely on the combination of different treatments to enhance the efficacy of established monotherapies. Pulsed electric fields (PEFs) are an established method (electrochemotherapy) for enhancing cellular drug uptake while cold physical plasma is an emerging and promising anticancer technology. This study aimed to combine both technologies to elucidate their cytotoxic potential as well as the underlying mechanisms of the effects observed. An electric field generator (0.9–1.0 kV/cm and 100-μs pulse duration) and an atmospheric pressure argon plasma jet were employed for the treatment of lymphoma cell lines as a model system. PEF but not plasma treatment induced cell membrane permeabilization. Additive cytotoxicity was observed for the metabolic activity and viability of the cells while the sequence of treatment in the combination played only a minor role. Intriguingly, a parallel combination was more effective compared to a 15-min pause between both treatment regimens. A combination effect was also found for lipid peroxidation; however, none could be observed in the cytosolic and mitochondrial reactive oxygen species (ROS) production. The supplementation with either antioxidant, a pan-caspase-inhibitor or a ferroptosis inhibitor, all partially rescued lymphoma cells from terminal cell death, which contributes to the mechanistic understanding of this combination treatment.

Cell Electropermeabilisation Enhancement by Non-Thermal-Plasma-Treated PBS

The effectiveness of electrochemotherapy (ECT) in local eradication of tumours in human and veterinary medicine has been proven. ECT consists of increasing the uptake of cytotoxic drugs by means of pulsed electric fields (PEFs) that transiently permeabilise the cell membrane. Still, this tumour treatment includes some drawbacks that are linked to the characteristics of the intense electric pulses (EPs) used. Meanwhile, the emerging field of cancer therapies that are based on the application of non-thermal plasmas (NTP) has recently garnered interest because of their potentialities as rich sources of reactive species. In this work, we investigated the potential capabilities of the combined application of indirect NTP treatment and microsecond PEFs (µsPEFs) to outperform in vitro cell electropermeabilisation, the basis of ECT. Thus, phosphate-buffered saline (PBS) was plasma-treated (pPBS) and used afterwards to explore the effects of its combination with µsPEFs. Analysis of two different cell lines (DC-3F Chinese hamster lung fibroblasts and malignant B16-F10 murine melanoma cells), by flow cytometry, revealed that this combination resulted in significant increases of the level of cell membrane electropermeabilisation, even at very low electric field amplitude. The B16-F10 cells were more sensitive to the combined treatment than DC-3F cells. Importantly, the percentage of permeabilised cells reached values similar to those of cells exposed to classical electroporation field amplitude (1100 V/cm) when the cells were treated with pPBS before and after being exposed only to very low PEF amplitude (600 V/cm). Although the level of permeabilisation of the cells that are treated by the pPBS and the PEFs at 600 V/cm is lower than the level reached after the exposure to µsPEFs alone at 1100 V/cm, the combined treatment opens the possibility to reduce the amplitude of the EPs used in ECT, potentially allowing for a novel ECT with reduced side-effects.

Nanosecond Pulsed Electric Fields Induce Endoplasmic Reticulum Stress Accompanied by Immunogenic Cell Death in Murine Models of Lymphoma and Colorectal Cancer

Depending on the initiating stimulus, cancer cell death can be immunogenic or non-immunogenic. Inducers of immunogenic cell death (ICD) rely on endoplasmic reticulum (ER) stress for the trafficking of danger signals such as calreticulin (CRT) and ATP. We found that nanosecond pulsed electric fields (nsPEF), an emerging new modality for tumor ablation, cause the activation of the ER-resident stress sensor PERK in both CT-26 colon carcinoma and EL-4 lymphoma cells. PERK activation correlates with sustained CRT exposure on the cell plasma membrane and apoptosis induction in both nsPEF-treated cell lines. Our results show that, in CT-26 cells, the activity of caspase-3/7 was increased fourteen-fold as compared with four-fold in EL-4 cells. Moreover, while nsPEF treatments induced the release of the ICD hallmark HMGB1 in both cell lines, extracellular ATP was detected only in CT-26. Finally, in vaccination assays, CT-26 cells treated with nsPEF or doxorubicin equally impaired the growth of tumors at challenge sites eliciting a protective anticancer immune response in 78% and 80% of the animals, respectively. As compared to CT-26, both nsPEF- and mitoxantrone-treated EL-4 cells had a less pronounced effect and protected 50% and 20% of the animals, respectively. These results support our conclusion that nsPEF induce ER stress, accompanied by bona fide ICD.

Physicochemical considerations for bottom-up synthetic biology

The bottom-up construction of synthetic cells from molecular components is arguably one of the most challenging areas of research in the life sciences. We review the impact of confining biological systems in synthetic vesicles. Complex cell-like systems require control of the internal pH, ionic strength, (macro)molecular crowding, redox state and metabolic energy conservation. These physicochemical parameters influence protein activity and need to be maintained within limits to ensure the system remains in steady-state. We present the physicochemical considerations for building synthetic cells with dimensions ranging from the smallest prokaryotes to eukaryotic cells.

Electrochemotherapy of superficial tumors - Current status:: Basic principles, operating procedures, shared indications, and emerging applications

Treatment of superficial tumors with electrochemotherapy (ECT) has shown a steep rise over the past decade and indications range from skin cancers to locally advanced or metastatic neoplasms. Based on reversible electroporation, which is a physical method to achieve transient tumor cell membrane permeabilization by means of short electric pulses, ECT increases cellular uptake of bleomycin and cisplatin and their cytotoxicity by 8,000- and 80-fold, respectively. Standard operating procedures were established in 2006 and updated in 2018. Ease of administration, patient tolerability, efficacy across histotypes, and repeatability are peculiar advantages, which make standard ECT (ie, ECT using fixed-geometry electrodes) a reliable option for controlling superficial tumor growth locally and preventing their morbidity. Consolidated indications include superficial metastatic melanoma, breast cancer, head and neck skin tumors, nonmelanoma skin cancers, and Kaposi sarcoma. In well-selected patients with oropharyngeal cancers, ECT ensures appreciable symptom control. Emerging applications include skin metastases from visceral or hematological malignancies, vulvar cancer, and some noncancerous skin lesions (keloids and capillary vascular malformations). Repeatability and integration with other oncologic therapies allow for consolidation of response and sustained tumor control. In this review, we present the basic principles of ECT, recently updated operating procedures, anesthesiological management, and provide a synthesis of the efficacy of standard ECT across histotypes.

Membrane Electroporation and Electropermeabilization: Mechanisms and Models

Exposure of biological cells to high-voltage, short-duration electric pulses causes a transient increase in their plasma membrane permeability, allowing transmembrane transport of otherwise impermeant molecules. In recent years, large steps were made in the understanding of underlying events. Formation of aqueous pores in the lipid bilayer is now a widely recognized mechanism, but evidence is growing that changes to individual membrane lipids and proteins also contribute, substantiating the need for terminological distinction between electroporation and electropermeabilization. We first revisit experimental evidence for electrically induced membrane permeability, its correlation with transmembrane voltage, and continuum models of electropermeabilization that disregard the molecular-level structure and events. We then present insights from molecular-level modeling, particularly atomistic simulations that enhance understanding of pore formation, and evidence of chemical modifications of membrane lipids and functional modulation of membrane proteins affecting membrane permeability. Finally, we discuss the remaining challenges to our full understanding of electroporation and electropermeabilization.

Effect of nanosecond pulsed electric field treatment on cell proliferation of microalgae

Photoautotrophic microalgae based biorefinery concepts are currently not competitive compared to other established production systems. Therefore, innovative upstream processes need to be developed to increase the competitiveness of photoautotrophic microalgae biorefinery concepts. Abiotic sub-lethal stress induction via nanosecond pulsed electric field (nsPEF) treatment might be a viable process to increase the efficiency of photoautotrophic microalgae cultivation. In this work, an increased cell growth after nsPEF treatment was observable. Application of nsPEF to highly proliferating cells in a repetitive process resulted in a statistical significant increase in cell growth (p = 0.009). The effect was most pronounced after five days wherefore cellular structures and processes were analyzed to reveal a possible mechanism. Within this work, a protocol for increased cell proliferation with a possible mechanism was derived, which improves competitiveness of photoautotrophic microalgae biorefineries in the future. However, based on the derived mechanism, the results are also relevant for other microorganisms.

Electric field-responsive nanoparticles and electric fields: physical, chemical, biological mechanisms and therapeutic prospects

Electric fields are among physical stimuli that have revolutionized therapy. Occurring endogenously or exogenously, the electric field can be used as a trigger for controlled drug release from electroresponsive drug delivery systems, can stimulate wound healing and cell proliferation, may enhance endocytosis or guide stem cell differentiation. Electric field pulses may be applied to induce cell fusion, can increase the penetration of therapeutic agents into cells, or can be applied as a standalone therapy to ablate tumors. This review describes the main therapeutic trends and overviews the main physical, chemical and biological mechanisms underlying the actions of electric fields. Overall, the electric field can be used in therapeutic approaches in several ways. The electric field can act on drug carriers, cells and tissues. Understanding the multiple effects of this powerful tool will help harnessing its full therapeutic potential in an efficient and safe way.

Transprotein-Electropore Characterization: A Molecular Dynamics Investigation on Human AQP4

Electroporation characterization is a topic of intensive interest probed by extensive ongoing research efforts. Usually, these studies are carried out on lipid-bilayer electroporation. Surprisingly, the possibility of water-channel electropore formation across transmembrane proteins themselves, particularly in view of such a promising application, has not yet been elucidated. The present work examines the geometrical and kinetic aspects of electropores and their stability in such a protein milieux (as opposed through the phospholipid membranes) in depth, by means of scrutiny of such a process in human-AQP4 as a well-representative prototype. The residues forming the electropore's walls, organized in loops, reveal the formation mechanism by their dipole alignment and translational response in response to applied axial electric fields in nonequilibrium molecular dynamics simulation. The magnitude of sustaining electric fields (keeping a stable electropore open) were determined. This suggests that transmembrane proteins could play a central role in electroporation applications, e.g., in medicine and biotechnology.

A wide-band bio-chip for real-time optical detection of bioelectromagnetic interactions with cells

The analytical and numerical design, implementation, and experimental validation of a new grounded closed coplanar waveguide for wide-band electromagnetic exposures of cells and their optical detection in real-time is reported. The realized device fulfills high-quality requirements for novel bioelectromagnetic experiments, involving elevated temporal and spatial resolutions. Excellent performances in terms of matching bandwidth (less than -10 dB up to at least 3 GHz), emission (below 1 × 10^-6 W/m²) and efficiency (around 1) have been obtained as revealed by both numerical simulations and experimental measurements. A low spatial electric field inhomogeneity (coefficient of variation of around 10 %) has been achieved within the cell solutions filling the polydimethylsiloxane reservoir of the conceived device. This original bio-chip based on the grounded closed coplanar waveguide concept opens new possibilities for the development of controlled experiments combining electromagnetic exposures and sophisticated imaging using optical spectroscopic techniques.

Pyroelectricity as a possible mechanism for cell membrane permeabilization

The effects of pyroelectricity on cell membrane permeability had never been explored. Pyroelectricity consists in the generation of an electric field in the surface of some materials when a change in temperature is produced. In the present study, tourmaline microparticles, which are known to display pyroelectrical properties, were subjected to different changes in temperature upon exposure to cells in order to induce an electric field at their surface. Then, the changes in the permeability of the cell membrane to a cytotoxic agent (bleomycin) were assessed by a cloning efficacy test. An increase in the permeability of the cell membrane was only detected when tourmaline was subjected to a change in temperature. This suggests that the apparition of an induced pyroelectrical electric field on the material could actually be involved in the observed enhancement of the cell membrane permeability as a result of cell electropermeabilization.