Optimization of the droplet electroporation method for wild type Chlamydomonas reinhardtii transformation

Safe and efficient RNA and DNA introduction into cells using digital electroporation system

We systematically compared the delivery and expression efficiencies according to cell types (plant and animal cells) and genetic materials (RNA and DNA) to deliver RNA using a digital electroporation system. Despite the significantly lower RNA delivery in Chlamydomoans reinhartii than DNA delivery due to RNA secondary structure and cell wall, the expression/delivery ratio of RNA was significantly higher than that of DNA (up to 90%), confirming the generally known fact that RNA is more favorable for expression than DNA. On the other hand, in K562 cells, the difference in RNA and DNA delivery efficiency was negligible. Therefore, structural differences between DNA and RNA affect delivery efficiency differently depending on the cell type. RNA delivery efficiency of K562 cells was high, but expression efficiency was much lower than that of microalgae. According to the proposed strategy, compatibility between K562 cells and the nucleic acids used in this study is presumed to be one of the reasons for this low expression efficiency. Gene regulation by delivering small interfering RNA (siRNA) was demonstrated in K562 cells, confirming the feasibility of the digital electroporation system for RNA interference (RNAi) research as a safe and efficient delivery system.

Recent Advances in Microscale Electroporation

Electroporation (EP) is a commonly used strategy to increase cell permeability for intracellular cargo delivery or irreversible cell membrane disruption using electric fields. In recent years, EP performance has been improved by shrinking electrodes and device structures to the microscale. Integration with microfluidics has led to the design of devices performing static EP, where cells are fixed in a defined region, or continuous EP, where cells constantly pass through the device. Each device type performs superior to conventional, macroscale EP devices while providing additional advantages in precision manipulation (static EP) and increased throughput (continuous EP). Microscale EP is gentle on cells and has enabled more sensitive assaying of cells with novel applications. In this Review, we present the physical principles of microscale EP devices and examine design trends in recent years. In addition, we discuss the use of reversible and irreversible EP in the development of therapeutics and analysis of intracellular contents, among other noteworthy applications. This Review aims to inform and encourage scientists and engineers to expand the use of efficient and versatile microscale EP technologies.

Expression of Anti-Lipopolysaccharide Factor Isoform 3 in Chlamydomonas reinhardtii Showing High Antimicrobial Activity

Antimicrobial peptides are a class of proteins with antibacterial functions. In this study, the anti-lipopolysaccharide factor isoform 3 gene (ALFPm3), encoding an antimicrobial peptide from Penaeus monodon with a super activity was expressed in Chlamydomonas reinhardtii, which would develop a microalga strain that can be used for the antimicrobial peptide production. To construct the expression cluster, namely pH2A-Pm3, the codon optimized ALFPm3 gene was fused with the ble reporter by 2A peptide and inserted into pH124 vector. The glass-bead method was performed to transform pH2A-Pm3 into C. reinhardtii CC-849. In addition to 8 μg/mL zeocin resistance selection, the C. reinhardtii transformants were further confirmed by genomic PCR and RT-PCR. Western blot analysis showed that the C. reinhardtii-derived ALFPm3 (cALFPm3) was successfully expressed in C. reinhardtii transformants and accounted for 0.35% of the total soluble protein (TSP). Furthermore, the results of antibacterial assay revealed that the cALFPm3 could significantly inhibit the growth of a variety of bacteria, including both Gram-negative bacteria and Gram-positive bacteria at a concentration of 0.77 μM. Especially, the inhibition could last longer than 24 h, which performed better than ampicillin. Hence, this study successfully developed a transgenic C. reinhardtii strain, which can produce the active ALFPm3 driven from P. monodon, providing a potential strategy to use C. reinhardtii as the cell factory to produce antimicrobial peptides.

Mechanistic studies of gene delivery into mammalian cells by electrical short-circuiting via an aqueous droplet in dielectric oil

We have developed a novel methodology for the delivery of cell-impermeable molecules, based on electrical short-circuiting via a water droplet in dielectric oil. When a cell suspension droplet is placed between a pair of electrodes with an intense DC electric field, droplet bouncing and droplet deformation, which results in an instantaneous short-circuit, can be induced, depending on the electric field strength. We have demonstrated successful transfection of various mammalian cells using the short-circuiting; however, the molecular mechanism remains to be elucidated. In this study, flow cytometric assays were performed with Jurkat cells. An aqueous droplet containing Jurkat cells and plasmids carrying fluorescent proteins was treated with droplet bouncing or short-circuiting. The short-circuiting resulted in sufficient cell viability and fluorescent protein expression after 24 hours’ incubation. In contrast, droplet bouncing did not result in successful gene transfection. Transient membrane pore formation was investigated by uptake of a cell-impermeable fluorescence dye YO-PRO-1 and the influx of calcium ions. As a result, short-circuiting increased YO-PRO-1 fluorescence intensity and intracellular calcium ion concentration, but droplet bouncing did not. We also investigated the contribution of endocytosis to the transfection. The pre-treatment of cells with endocytosis inhibitors decreased the efficiency of gene transfection in a concentration-dependent manner. Besides, the use of pH-sensitive dye conjugates indicated the formation of an acidic environment in the endosomes after the short-circuiting. Endocytosis is a possible mechanism for the intracellular delivery of exogenous DNA.

Nuclear transformation of Chlamydomonas reinhardtii: A review

Chlamydomonas reinhardtii is a model organism with three sequenced genomes capable of genetic transformation. C. reinhardtii has the advantages of being low cost, non-toxic, and having a post-translational modification system that ensures the recombinant proteins have the same activity as natural proteins, thus making it a great platform for application in molecular biology and other fields. In this review, we summarize the existing methods for nuclear transformation of C. reinhardtii, genes for selection, examples of foreign protein expression, and factors affecting transformation efficiency, to provide insights into effective strategies for the nuclear transformation of C. reinhardtii.

Effect of Deformation on Droplet Contact Charge Electrophoresis

The effect of deformation on the droplet contact charge electrophoresis (CCEP) was investigated for consistent droplet movement control. Through systematic experiments and numerical simulations, it has been found that overcharging by deformation is up to about 130% of the sphere and is mainly driven by the concentration of the electric field near the tip of the droplet rather than an increase in the surface area. Dimensional analysis revealed a consistent droplet CCEP motion with the electric capillary number range of 0.01-0.09. We also found that the dimensionless droplet charge follows a universal curve proportional to the electric capillary number, regardless of the droplet size, and the weak dependence on the droplet size shown in the experimental results is due to hydrodynamic effects, not electrostatic ones. Changes in droplet velocity distribution with droplet size and the electric capillary number were also investigated. Using the perfect conductor theory and Stokes law, we derived an analytical relationship between the droplet center velocity and the electric capillary number and analyzed the experimental results based on this relationship. This study implies that if proper hydrodynamic correction is applied, the droplet CCEP and its deformation effect can be explained by a perfect conductor theory.

Wall Effects on Hydrodynamic Drag and the Corresponding Accuracy of Charge Measurement in Droplet Contact Charge Electrophoresis

Droplet size dependent wall effects on hydrodynamic drag and the corresponding droplet contact charge estimations were experimentally and theoretically investigated. The consistent reduction in the dimensionless droplet contact charges proportional to droplet size was reported and explained by the parallel and approaching wall effects on the drag coefficient. Extrapolation of the size dependent droplet charge data showed that the droplet charge follows the perfect conductor theory when the droplet radius approaches zero. The proposed model was applied to the drag calculation to estimate and compare dimensionless charges before and after consideration of the wall effects. The droplet free fall test concluded that the droplets in the current experimental setup follow Stokes' law. The theoretical velocity profile of the droplet approaching the wall perpendicularly is proposed considering the approaching wall effect on hydrodynamic drag and verified by comparison with the experiment. The droplet size dependent velocity profile shape change was also explained by this approaching wall effect. The shape of the asymmetric velocity profile along the direction of droplet movement was explained by the effect of the image charge through direct numerical calculation of the electric force. The direct calculation of the electric force also showed that the electric correction at the center of the cuvette is negligible; thus, it is sufficient to consider only hydrodynamic correction for accurate charge measurement in this experimental system. The present study will contribute to the accurate measurement of the droplet charges under contact charge electrophoresis. It also provides the basis for precise control of droplet movement in lab-on-a-chip devices.

Flow micropillar array electroporation to enhance size specific transfection to a large population of cells

Despite serving as a popular non-viral delivery approach, electroporation carries several drawbacks in its current configurations. We developed a Flow Micropillar-array Electroporation (FME) system to wisely regulate an important transmembrane-determining factor, namely cell size variations among individual cells, to achieve effective transfection. In FME, cells flow through a slit-type microfluidic channel on which carbon electrodes with well-patterned micropillar array texture are integrated as the top and bottom wall. Gravity helps bring cells to the micropillar array surface so that the permeable area on cells in different size populations is specified by their size regardless their random location fact. Without sacrificing cell viability, we demonstrate this FME concept by delivering DNA plasmids to several mammalian cell lines with obvious transfection enhancement when compared to a commercial system (K562: 3.0 folds; A549: 3.3 folds; HeLa: 1.8 folds, COS7: 1.7 folds; 293T: 2.9 folds; mES: 2.5 folds). Moreover, carbon-based electrodes are less expensive, more durable, and convenient for integration with a microfluidic setup which enables rapid and massive transfection capability that many therapeutic application needs. The success of FME may benefit many emerging biological studies and clinical practice that requires effective transfection to a large population of cells in limited processing time.

Improving lipid production by strain development in microalgae: Strategies, challenges and perspectives

Over the past decade, the number of original articles and reviews presenting microalgae as a promising feedstock for biodiesel has increased tremendously. Many improvements of microalgae have been achieved through selection and strain development for industrial applications. However, the large-scale production of lipids for commercialization is not yet realistic because the production is still much more expensive than that of agricultural products. This review summarizes recent research on the induction of lipid biosynthesis in microalgae and the various strategies of genetic and metabolic engineering for enhancing lipid production. Strain engineering targets are proposed based on these strategies. To address current limitations of strain engineering for lipid production, this review provides insights on recent engineering strategies based on molecular tools and methods, and also discusses further perspectives.

Optimization and Comparison of Different Methods and Factors for Efficient Transformation of Brucella abortus RB51strain

Background:

The development of protective vaccines for Brucella spp. has been hampered by the difficulty in transformation of Brucella cells with foreign DNA for genetic manipulation. It seems that the formation of Brucella spheroplasts would increase the efficiency of transformation. The aim of this study was to devise an efficient method for the transformation of Brucella spp.

Materials and Methods:

At first, spheroplast of Brucella was prepared by glycine and ampicillin induction and transformed using optimized protocols of CaCl₂, electroporation, and lipofection methods. Then, the efficacy of transformation was compared between the three-mentioned methods.

Results:

Ampicillin-induced spheroplasts from early-log phase culture of brucella when incubated in a medium-containing 0.2 M sucrose during cell recovery had higher transformation efficiency in three different methods. Comparison of the transformation efficiency of Brucella abortus RB51 using the CaCl₂, lipofection, and electroporation methods revealed that the transformation efficiency with the lipofection method was significantly higher than with other two methods (P < 0.05).

Conclusions:

Lipofection method by lipofectamine 2000 on ampicillin-induced spheroplasts can be a suitable approach for Brucella transformation.