Physiological strains remodel extracellular matrix and cell-cell adhesion in osteoblastic cells cultured on alumina-coated titanium alloy

Possible Mechanisms for the Effects of Sound Vibration on Human Health

This paper presents a narrative review of research literature to “map the landscape” of the mechanisms of the effect of sound vibration on humans including the physiological, neurological, and biochemical. It begins by narrowing music to sound and sound to vibration. The focus is on low frequency sound (up to 250 Hz) including infrasound (1–16 Hz). Types of application are described and include whole body vibration, vibroacoustics, and focal applications of vibration. Literature on mechanisms of response to vibration is categorized into hemodynamic, neurological, and musculoskeletal. Basic mechanisms of hemodynamic effects including stimulation of endothelial cells and vibropercussion; of neurological effects including protein kinases activation, nerve stimulation with a specific look at vibratory analgesia, and oscillatory coherence; of musculoskeletal effects including muscle stretch reflex, bone cell progenitor fate, vibration effects on bone ossification and resorption, and anabolic effects on spine and intervertebral discs. In every category research on clinical applications are described. The conclusion points to the complexity of the field of vibrational medicine and calls for specific comparative research on type of vibration delivery, amount of body or surface being stimulated, effect of specific frequencies and intensities to specific mechanisms, and to greater interdisciplinary cooperation and focus.

Mechanic stress generated by a time-varying electromagnetic field on bone surface

Bone cells sense mechanical load, which is essential for bone growth and remodeling. In a fracture, this mechanism is compromised. Electromagnetic stimulation has been widely used to assist in bone healing, but the underlying mechanisms are largely unknown. A recent hypothesis suggests that electromagnetic stimulation could influence tissue biomechanics; however, a detailed quantitative understanding of EM-induced biomechanical changes in the bone is unavailable. This paper used a muscle/bone model to study the biomechanics of the bone under EM exposure. Due to the dielectric properties of the muscle/bone interface, a time-varying magnetic field can generate both compressing and shear stresses on the bone surface, where many mechanical sensing cells are available for cellular mechanotransduction. I calculated these stresses and found that the shear stress is significantly greater than the compressing stress. Detailed parametric analysis suggests that both the compressing and shear stresses are dependent on the geometrical and electrical properties of the muscle and the bone. These stresses are also functions of the orientation of the coil and the frequency of the magnetic field. It is speculated that the EM field could apply biomechanical influence to fractured bone, through the fine-tuning of the controllable field parameters. Graphical abstract Mechanic stress on bone surface in a time-varying magnetic field.

Low-magnitude, high-frequency vibration promotes the adhesion and the osteogenic differentiation of bone marrow-derived mesenchymal stem cells cultured on a hydroxyapatite-coated surface: The direct role of Wnt/β-catenin signaling pathway activation

The positive effect of low-magnitude, high‑frequency (LMHF) vibration on implant osseointegration has been demonstrated; however, the underlying cellular and molecular mechanisms remain unknown. The aim of this study was to explore the effect of LMHF vibration on the adhesion and the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) cultured on hydroxyapatite (HA)-coated surfaces in an in vitro model as well as to elucidate the molecular mechanism responsible for the effects of LMHF vibration on osteogenesis. LMHF vibration resulted in the increased expression of fibronectin, which was measured by immunostaining and RT-qPCR. Stimulation of BMSCs by LMHF vibration resulted in the rearrangement of the actin cytoskeleton with more prominent F-actin. Moreover, the expression of β1 integrin, vinculin and paxillin was notably increased following LMHF stimulation. Scanning electron microscope observations revealed that there were higher cell numbers and more extracellular matrix attached to the HA-coated surface in the LMHF group. Alkaline phosphatase activity as well as the expression of osteogenic-specific genes, namely Runx2, osterix, collagen I and osteocalcin, were significantly elevated in the LMHF group. In addition, the protein expression of Wnt10B, β-catenin, Runx2 and osterix was increased following exposure to LMHF vibration. Taken together, the findings of this study indicate that LMHF vibration promotes the adhesion and the osteogenic differentiation of BMSCs on HA-coated surfaces in vitro, and LMHF vibration may directly induce osteogenesis by activating the Wnt/β‑catenin signaling pathway. These data suggest that LMHF vibration enhances the osseointegration of bone to a HA-coated implant, and provide a scientific foundation for improving bone-implant osseointegration through the application of LMHF vibration.

Mechanical strain promotes osteoblast ECM formation and improves its osteoinductive potential

BACKGROUND

The extracellular matrix (ECM) provides a supportive microenvironment for cells, which is suitable as a tissue engineering scaffold. Mechanical stimulus plays a significant role in the fate of osteoblast, suggesting that it regulates ECM formation. Therefore, we investigated the influence of mechanical stimulus on ECM formation and bioactivity.

METHODS

Mouse osteoblastic MC3T3-E1 cells were cultured in cell culture dishes and stimulated with mechanical tensile strain. After removing the cells, the ECMs coated on dishes were prepared. The ECM protein and calcium were assayed and MC3T3-E1 cells were re-seeded on the ECM-coated dishes to assess osteoinductive potential of the ECM.

RESULTS

The cyclic tensile strain increased collagen, bone morphogenetic protein 2 (BMP-2), BMP-4, and calcium levels in the ECM. Compared with the ECM produced by unstrained osteoblasts, those of mechanically stimulated osteoblasts promoted alkaline phosphatase activity, elevated BMP-2 and osteopontin levels and mRNA levels of runt-related transcriptional factor 2 (Runx2) and osteocalcin (OCN), and increased secreted calcium of the re-seeded MC3T3-E1 cells.

CONCLUSION

Mechanical strain promoted ECM production of osteoblasts in vitro, increased BMP-2/4 levels, and improved osteoinductive potential of the ECM. This study provided a novel method to enhance bioactivity of bone ECM in vitro via mechanical strain to osteoblasts.

Low-magnitude high-frequency loading via whole body vibration enhances bone-implant osseointegration in ovariectomized rats

Osseointegration is vital to avoid long-time implants loosening after implantation surgery. This study investigated the effect of low-magnitude high-frequency (LMHF) loading via whole body vibration on bone-implant osseointegration in osteoporotic rats, and a comparison was made between LMHF vibration and alendronate on their effects. Thirty rats were ovariectomized to induce osteoporosis, and then treated with LMHF vibration (VIB) or alendronate (ALN) or a control treatment (OVX). Another 10 rats underwent sham operation to establish Sham control group. Prior to treatment, hydroxyapatite (HA)-coated titanium implants were inserted into proximal tibiae bilaterally. Both LMHF vibration and alendronate treatment lasted for 8 weeks. Histomorphometrical assess showed that both group VIB, ALN and Sham significantly increased bone-to-implant contact and peri-implant bone fraction (p < 0.05) when compared with group OVX. Nevertheless the bone-to-implant contact and peri-implant bone fraction of group VIB were inferior to group ALN and Sham (p < 0.05). Biomechanical tests also revealed similar results in maximum push out force and interfacial shear strength. Accordingly, it is concluded that LMHF loading via whole body vibration enhances bone-to-implant osseointegration in ovariectomized rats, but its effectiveness is weaker than alendronate.

Effects of physiological mechanical strains on the release of growth factors and the expression of differentiation marker genes in human osteoblasts growing on Ti-6Al-4V

Mechanical loading factors at the bone-implant interface are critical for the osseointegration and clinical success of the implant. The aim of the present investigation was to study the effects of mechanical strain on the orthopedic biomaterial Ti-6Al-4V/osteoblast interface, using an in vitro model. Homogeneous strain was applied to human bone marrow derived osteoblasts (HBMDOs) cultured on Ti-6Al-4V, at physiological levels (strain magnitudes 500 microstrain (microepsilon) and 1000 microepsilon, at frequencies of load application 0.5 Hz and 1 Hz), by a mechanostimulatory system, based on the principle of four-point bending. Semi-quantitative reverse transcription-polymerase chain reaction (sqRT-PCR) was used to determine the mRNA expression of Cbfa1 and osteocalcin at different loading conditions. The release of growth factors as a response to stretch was also investigated by transferring stretch-conditioned media to nonstretched cells and by measuring their effect on the regulation of DNA synthesis. Mechanical loading was found to contribute to the regulation of osteoblast differentiation by influencing the level of the osteoblast-specific transcription factor Cbfa1, both at the mRNA and protein level, and also the level of osteocalcin, which is regarded as the most osteoblast-specific gene. Both genes were differentially expressed shortly after the application of different mechanical stimuli, in terms of strain frequency, magnitude, and time interval. Media conditioned from mechanically stressed HBMDOs stimulate DNA synthesis more intensely compared to media conditioned from unstressed control cultures, indicating that mechanical strain induces the release of a mitogenic potential that regulates cell proliferation.

Estimation of hydrodynamic shear stresses developed on human osteoblasts cultured on Ti-6Al-4V and strained by four point bending. Effects of mechanical loading to specific gene expression

The aim of the present investigation was to study the effects of mechanical strain on the orthopedic biomaterial Ti-6Al-4V-osteoblast interface, using an in vitro model. Homogeneous strain was applied to Human Bone Marrow derived Osteoblasts (HBMDOs) cultured on Ti-6Al-4V, at levels which are considered physiological, by a four-point bending mechanostimulatory system. A simple model for the estimation of maximum hydrodynamic shear stresses developed on cell culture layer and induced by nutrient medium flow during mechanical loading, as a function of the geometry of the culture plate and the load characteristics, is proposed. Shear stresses were lower than those which can elicit cell response. Mechanical loading was found that contributes to the regulation of osteoblast differentiation by influencing the expression of the osteoblast-specific transcription factor Cbfa1, both at the mRNA and protein level, and also the osteocalcin expression, whereas osteopontin gene expression was unaffected by mechanical loading at all experimental conditions.

Mechanotransduction in human bone: in vitro cellular physiology that underpins bone changes with exercise

Bone has a remarkable ability to adjust its mass and architecture in response to a wide range of loads, from low-level gravitational forces to high-level impacts. A variety of types and magnitudes of mechanical stimuli have been shown to influence human bone cell metabolism in vitro, including fluid shear, tensile and compressive strain, altered gravity and vibration. Therefore, the current article aims to synthesize in vitro data regarding the cellular mechanisms underlying the response of human bone cells to mechanical loading. Current data demonstrate commonalities in response to different types of mechanical stimuli on the one hand, along with differential activation of intracellular signalling on the other. A major unanswered question is, how do bone cells sense and distinguish between different types of load? The studies included in the present article suggest that the type and magnitude of loading may be discriminated by overlapping mechanosensory mechanisms including (i) ion channels; (ii) integrins; (iii) G-proteins; and (iv) the cytoskeleton. The downstream signalling pathways identified to date appear to overlap with known growth factor and hormone signals, providing a mechanism of interaction between systemic influences and the local mechanical environment. Finally, the data suggest that exercise should emphasize the amount of load rather than the number of repetitions.

In VitroMicrodistraction of Preosteoblasts: Distraction Promotes Proliferation and Oscillation Promotes Differentiation

Osteoblast biology is influenced in vivo by a 3-dimensional (3D) extracellular matrix that mediates their adhesion and interaction and by a constant state of compressive and tensile forces. To study the role of mechanical stress on osteoblasts in vitro, these parameters must be addressed. Therefore, this study describes the use of a novel, in vitro system that subjects cells to distractive and compressive forces in a 3D environment. This system, termed a microdistractor system, was used to apply linear forces to 3D collagen type I gels containing preosteoblasts. Gels were induced for up to 16 days in osteogenic medium and subjected to either constant linear distraction (distraction gels) or to repeating cycles of distraction and compression (oscillation gels). The effect of these stresses was evaluated over time by measuring proliferation rates, protein synthesis (i.e., cellular activity), and osteogenic differentiation levels. While linear forces in general appeared to increase protein synthesis, force-specific effects on proliferation and differentiation were observed. Specifically, distraction forces appeared to enhance MC3T3 proliferation while distraction/compressive forces appeared to accelerate their osteogenic differentiation program. Therefore, these results suggest that the microdistraction system may be an appropriate in vitro system for the study of mechanobiology in osteoblast phenotype.

Behavior of human osteoblast-like cells in contact with electrodeposited calcium phosphate coatings

Calcium-deficient hydroxyapatite (Ca-def-HAP) thin films were elaborated on Ti6Al4V substrates by electrodeposition. The coatings exhibit two different morphologies and crystallinities. Human osteoblast-like cells (MG-63) were cultured on the surfaces of these materials; the cell content and viability were evaluated up to 28 days. The scanning electron microscopy and biological investigations showed cells with a normal morphology, good proliferation, and viability from 7 to 21 days. But after 28 days, the number of live cells decreases in both cases; however, this decrease is less important in the case of calcium phosphate (CaP) coating surface when compared with the control (cell culture plastic). The cells cultured on Ca-def-HAP coating exhibit more cellular extensions and extracellular matrix. RT-PCR for type I collagen, alkaline phosphatase, and osteocalcin studies were also carried out, and was found that the CaP enhances gene expression of ALP and OC and thus the differentiation of osteoblast-like cells. Moreover, this study shows that the difference in the morphology of CaP coatings has no effect on the biocompatibility.

Micro-CT-based screening of biomechanical and structural properties of bone tissue engineering scaffolds

The development of successful scaffolds for bone tissue engineering requires a concurrent engineering approach that combines different research fields. In order to limit in vivo experiments and reduce trial and error research, a scaffold screening technique has been developed. In this protocol seven structural and three biomechanical properties of potential scaffold materials are quantified and compared to the desired values. The property assessment is done on computer models of the scaffolds, and these models are based on micro-CT images. As a proof of principle, three porous scaffolds were evaluated with this protocol: stainless steel, hydroxyapatite, and titanium. These examples demonstrate that the modelling technique is able to quantify important scaffold properties. Thus, a powerful technique for automated screening of bone tissue engineering scaffolds has been developed that in a later stage may be used to tailor the scaffold properties to specific requirements.

Modulation of the responses of human osteoblast-like cells to physiologic mechanical strains by biomaterial surfaces

In a previous study we demonstrated that MG-63 cells cultured on Ti-6Al-4V discs covered by alumina ceramic and submitted to intermittent mechanical strain (IMS) presented morphological alteration associated with enhanced differentiation. Here we examine how the mechanical response of osteoblasts can be modulated by the nature of the substrate. MG-63 cells were cultured on four materials: polystyrene and Ti-6Al-4V (average roughness = 0.48 microm) as smooth substrates; Ti-6Al-4V (average roughness = 5.76 microm) and Ti-6Al-4V covered with alumina (average roughness = 5.21 microm) as rough substrates. Mechanical strains were applied for 15 min, three times a day for 1-5 days with a 600 microstrains magnitude and a 0.25 Hz frequency. IMS stimulated alkaline phosphatase activity by 25-35% on all substrates and had no effect on cell growth on either substrate. Fibronectin (FN) was chosen as representative of cell-matrix interaction. FN production was increased by 60% after 1 day of stretching only on alumina-coated discs. FN organization examined on smooth substrates was affected by 5 days of IMS, showing a thickening of the fibres. The same modifications induced by IMS were previously observed on alumina-covered discs. Vinculin expression was not affected by IMS whatever the substrate. Cell-cell interactions were determined by N-cadherin immunoblotting. N-cadherin expression was increased by IMS specifically on rough substrates. Our results suggest that the nature of the surface did not influence the up-regulation of alkaline phosphatase activity induced by IMS, but modulates specifically cell-substrate as well as cell-cell interactions in response to IMS.