Electron beam irradiation modification of collagen membrane

Structure and properties of the acellular porcine cornea irradiated with 60Co-γ and electron beam and its histocompatibility

Acellular porcine cornea (APC) has been used in corneal transplantation and treatment of the corneal diseases. Sterilization is a key step before the application of graft, and irradiation is one of the most commonly used methods. In this paper, APC was prepared by the physical freeze-thawing combined with biological enzymes, and the effects of the electron beam (E-beam) and cobalt 60 (60Co-γ) at the dose of 15 kGy on the physicochemical properties, structure, immunogenicity, and biocompatibility of the APC were investigated. After decellularization, the residual DNA was 20.86 ± 1.02 ng/mg, and the α-Gal clearance rate was more than 99%. Irradiation, especially the 60Co-γ, reduced the cornea's transmittance, elastic modulus, enzymatic hydrolysis rate, swelling ratio, and cross-linking degree. Meanwhile, the diameter and spacing of the collagen fibers increased. In the rat subcutaneous implantation, many inflammatory cells appeared in the unirradiated APC, while the irradiated had good histocompatibility, but the degradation was faster. The lamellar keratoplasty in rabbits indicated that compared to the E-beam, the 60Co-γ damaged the chemical bond of collagen to a larger extent, reduced the content of GAGs, and prolonged the complete epithelization of the grafts. The corneal edema was more serious within 1 month after the surgery. After 2 months, the thickness of the APC with the two irradiation methods tended to be stable, but that in the 60Co-γ group became thinner. The pathological results showed that the collagen structure was looser and the pores were larger, indicating the 60Co-γ had a more extensive effect on the APC than the E-beam at 15 kGy.

The electron beam irradiation of collagen in the dry and gel states: The effect of the dose and water content from the primary to the quaternary levels

The aim of our study was to describe the impact of collagen in the gel and dry state to various doses of electron beam radiation (1, 10 and 25 kGy) which are using for food processing and sterilization. The changes in the chemical compositions (water, amino acids, lipids, glycosaminoglycans) were analyzed and the changes in the structure (triple-helix or β-sheet, the integrity of the collagen) were assessed. Subsequently, the impact of the applied doses on the mechanical properties, stability in the enzymatic environment, swelling and morphology were determined. The irradiated gels evinced enhanced degrees of cross-linking with only partial degradation. Nevertheless, an increase was observed in their stability manifested via a higher degree of resistance to the enzymatic environment, a reduction in swelling and, in terms of the mechanical behaviour, an approximation to the non-linear behavior of native tissues. In contrast, irradiation in the dry state exerted a somewhat negative impact on the observed properties and was manifested mainly via the scission of the collagen molecule and via a lower degree of stability in the aqueous and enzymatic environments. Neither the chemical composition nor the morphology was affected by irradiation.

Structure and properties of the acellular porcine cornea irradiated with electron beam and its in-situ implantation

Different sterilization doses of the electron beam (E-beam) will change the properties of biomaterials and affect their clinical application. Acellular porcine cornea (APC) is a promising corneal substitute to alleviate the shortage of corneal resources. The residual DNA was significantly reduced to 18.50 ± 3.19 ng/mg, and the clearance rate of α-Gal was close to 100% after the treatment with freezing-thawing combined enzyme, indicating that the decellularization was effective. The effects of different E-beam doses at 0, 2, 8, 15, and 25 kGy on the APC were studied. With the increase in irradiation dose, the transmittance, tensile strength, and swelling ratio of APC gradually decreased, but the resistance to enzymatic degradation was stronger than that of non-irradiated APC, especially at 8 kGy. The structure of APC was denser after irradiation, but the dose of 25 kGy could cause partial collagen fiber fracture and increase the pore size. The cell viability of the APC irradiated by 15 and 25 kGy were greater than 80%. After the implantation in rabbit corneas, there was no obvious neovascularization and inflammation, but the dose of 25 kGy had a more destructive effect on the chemical bonds of collagen, which made the APC easier to be degraded. The thickness of APC in the 25 kGy group was thinner than that in the 15 kGy group 1 year after surgery, and the epithelium grew more slowly, so the E-beam dose of 15 kGy might be more suitable for the sterilization of APC.

Correlations on the Structure and Properties of Collagen Hydrogels Produced by E-Beam Crosslinking

In this study, a collagen hydrogel using collagen exclusively produced in Romania, was obtained by electron beam (e-beam) crosslinking. The purpose of our study is to obtain new experimental data on the crosslinking of collagen and to predict as faithfully as possible, its behavior at high irradiation doses and energies. To pursue this, the correlations between macromolecular structure and properties of collagen hydrogels were determined by rheological analysis, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Differential Scanning Calorimetry (DSC), respectively. The gel fraction, swelling degree, and network parameters of the collagen hydrogels were also investigated at different irradiation doses. Through experimental exploration, we concluded that irradiation with e-beam up to 25 kGy induces crosslinking processes in collagen structure without producing advanced degradation processes. E-beam technology is a great method to develop new materials for medical applications without adding other chemical reagents harmful to human health. The future aim is to develop new wound dressings for rapid healing based on collagen, through irradiation technologies.

Factors affecting thermal stability of collagen from the aspects of extraction, processing and modification

Abstract

Collagen, as a thermal-sensitive protein, is the most abundant structural protein in animals. Native collagen has been widely applied in various fields due to its specific physicochemical and biological properties. The beneficial properties would disappear with the collapse of the unique triple helical structure during heating. Understanding thermal stability of collagen is of great significance for practical applications. Previous studies have shown the thermal stability would be affected by the different sources, extraction methods, solvent systems in vitro and modified methods. Accordingly, the factors affecting thermal stability of collagen are discussed in detail in this review.

Graphical abstract

Sterilization and Cross-Linking Combined with Ultraviolet Irradiation and Low-Energy Electron Irradiation Procedure: New Perspectives for Bovine Pericardial Implants in Cardiac Surgery

BACKGROUND

 Bovine pericardium is the major natural source of patches and aortic valve substitutes in cardiac repair procedures. However, long-term tissue durability and biocompatibility issues lead to degeneration (e.g., calcification) that requires reoperation. Tissue preparation strategies, including glutaraldehyde fixation, are reasons for the deterioration of pericardial tissues. We describe a pretreatment procedure involving sterilization and cross-linking combined with ultraviolet (UV) irradiation and low-energy electron irradiation (SULEEI). This innovative, glutaraldehyde-free protocol improves the mechanical aspects and biocompatibility of porcine pericardium patches.

METHODS

 We adopted the SULEEI protocol, which combines decellularization, sterilization, and cross-linking, along with UV irradiation and low-energy electron irradiation, to pretreat bovine pericardium. Biomechanics, such as ultimate tensile strength and elasticity, were investigated by comparing SULEEI-treated tissue with glutaraldehyde-fixed analogues, clinical patch materials, and an aortic valve substitute. Histomorphological and cellular aspects were investigated by histology, DNA content analysis, and degradability.

RESULTS

 Mechanical parameters, including ultimate tensile strength, elasticity (Young's modulus), and suture retention strength, were similar for SULEEI-treated and clinically applied bovine pericardium. The SULEEI-treated tissues showed well-preserved histoarchitecture that resembled all pericardial tissues investigated. Fiber density did not differ significantly. DNA content after the SULEEI procedure was reduced to less than 10% of the original tissue material, and more than 50% of the SULEEI-treated pericardium was digested by collagenase.

CONCLUSION

 The SULEEI procedure represents a new treatment protocol for the preparation of patches and aortic valve prostheses from bovine pericardial tissue. The avoidance of glutaraldehyde fixation may lessen the tissue degeneration processes in cardiac repair patches and valve prostheses.

Stabilization and Sterilization of Pericardial Scaffolds by Ultraviolet and Low-Energy Electron Irradiation

IMPACT STATEMENT

Pericardium-based tissue transplantation is a lifesaving treatment. Commercial glutaraldehyde-treated pericardial tissue exhibits cytotoxicity, which is associated with the accelerated graft failure. Replacement of glutaraldehyde has been suggested to overcome those drawbacks. In this study, we report a toxin-free method that combines tissue stabilization with a terminal sterilization. Our data indicate that the SULEEI procedure, which is part of an issued patent, may be a promising first step toward glutaraldehyde-free pericardium-based tissue transplants. Thus, our results may contribute to improving cardiovascular treatment strategies.

Quantitative analysis of the effect of environmental-scanning electron microscopy on collagenous tissues

Environmental-scanning electron microscopy (ESEM) is routinely applied to various biological samples due to its ability to maintain a wet environment while imaging; moreover, the technique obviates the need for sample coating. However, there is limited research carried out on electron-beam (e-beam) induced tissue damage resulting from using the ESEM. In this paper, we use quantitative second-harmonic generation (SHG) microscopy to examine the effects of e-beam exposure from the ESEM on collagenous tissue samples prepared as either fixed, frozen, wet or dehydrated. Quantitative SHG analysis of tissues, before and after ESEM e-beam exposure in low-vacuum mode, reveals evidence of cross-linking of collagen fibers, however there are no structural differences observed in fixed tissue. Meanwhile wet-mode ESEM appears to radically alter the structure from a regular fibrous arrangement to a more random fiber orientation. We also confirm that ESEM images of collagenous tissues show higher spatial resolution compared to SHG microscopy, but the relative tradeoff with collagen specificity reduces its effectiveness in quantifying collagen fiber organization. Our work provides insight on both the limitations of the ESEM for tissue imaging, and the potential opportunity to use as a complementary technique when imaging fine features in the non-collagenous regions of tissue samples.

Modification and optimization of electrospun gelatin sheets by electron beam irradiation for soft tissue engineering

BACKGROUND

Crosslinked gelatin nanofibers are one of the widely used scaffolds for soft tissue engineering. However, modifying the biodegradation rate of chemically crosslinked gelatin is necessary to facilitate cell migration and tissue regeneration. Here, we investigated the optimal electron beam (e-beam) irradiation doses with biodegradation behavior on changes in the molecular weight, morphology, pore structure, and cell proliferation profiles of electrospun nanofibrous gelatin sheets.

METHODS

The molecular weights of uncrosslinked gelatin nanofibers were measured using gel permeation chromatography. The morphology and pore structure of the gelatin scaffolds were analyzed by scanning electron microscopy and a porosimeter. Biodegradation tests were performed in phosphate-buffered saline solutions for 4 weeks. Cell proliferation and tissue regeneration profiles were examined in fibroblasts using WST-1 assays and hematoxylin and eosin staining.

RESULTS

Crosslinked gelatin nanofiber sheets exposed to e-beam irradiation over 300 kGy showed approximately 50% weight loss in 2 weeks. Gelatin scaffolds exposed to e-beam irradiation at 100-200 kGy showed significantly increased cell proliferation after 7 days of incubation.

CONCLUSIONS

These findings suggested that the biodegradation and cell proliferation rates of gelatin nanofiber scaffolds could be optimized by varying e-beam irradiation doses for soft tissue engineering.

Cellulose membrane as a biomaterial: from hydrolysis to depolymerization with electron beam

The cellulose membrane (CM) is a major component of plant cell walls and is both a chemically and mechanically stable synthetic polymer with many applications for use in tissue engineering. However, due to its dissolution difficulty, there are no known physiologically relevant or pharmaceutically clinical applications for this polymer. Thus, research is underway on controlled and adjusted forms of cellulose depolymerization.

To advance the study of applying CM for tissue engineering, we have suggested new possibilities for electron beam (E-beam) treatment of CM. Treatment of CM with an E-beam can modify physical, chemical, molecular and biological properties, so it can be studied continuously to improve its usefulness and to enhance value.

We review clinical applications of CM, cellulose binding domains, cellulose crosslinking proteins, conventional hydrolysis of cellulose, and depolymerization with radiation and focus our experiences with depolymerization of E-beam irradiated CM in this article.

Vocal Fold Augmentation with Beta Glucan Hydrogel Cross-Linked by γ Irradiation for Enhanced Duration of Effect: In Vivo Animal Study

This study explored a novel strategy to restore the vocal gap by using cross-linked β-glucan hydrogel by γ-irradiation. An aqueous solution of 5 wt% β-glucan was prepared and cross-linked using ⁶⁰Co γ irradiation. Ten nude mice were injected with 0.8 mL of irradiated β-glucan on the left back and the same volume of nonirradiated β-glucan on the right back for comparison. The mice were sacrificed at 1 and 2 weeks after injection and histological evaluations were performed. Irradiated β-glucan demonstrated a significantly larger volume than nonirradiated β-glucan in the back of nude mice with less inflammatory reaction. After unilateral recurrent laryngeal nerve section in New Zealand White rabbits, irradiated and nonirradiated β-glucan were injected into paralyzed vocal folds. Irradiated β-glucan remained at the paralyzed vocal fold without definite inflammatory signs on endoscopy. High-speed recordings of vocal fold vibration showed decreased vocal gap in irradiated group compared to nonirradiated group. Histologically, the laryngeal epithelium and lamina propria remained intact, without inflammatory cell infiltration. Our newly developed injection material, irradiated β-glucan, showed excellent biocompatibility and remained longer than nonirradiated β-glucan in vivo, suggesting irradiated hydrogels as a new therapeutic approach that may be useful for the long-term treatment of vocal fold palsy.

Electron beam effect on biomaterials I: focusing on bone graft materials

BACKGROUND

To develop biocompatible bony regeneration materials, allogenic, xenogenic and synthetic bones have been irradiated by an electron beam to change the basic structures of their inorganic materials. The optimal electron beam energy and individual dose have not been established for maximizing the bony regeneration capacity in electron beam irradiated bone.

RESULTS

Commercial products consisting of four allogenic bones, six xenogenic bones, and six synthetic bones were used in this study. We used 1.0-MeV and 2.0 MeV linear accelerators (power: 100 KW, pressure; 115 kPa, temperature; -30 to 120°C, sensor sensitivity: 0.1-1.2 mV/kPa, generating power sensitivity: 44.75 mV/kPa, supply voltage: 50.25 V), and a microtrone with different individual irradiation doses such as 60 kGy and 120 kGy. Additional in vitro analyses were performed by elementary analysis using field emission scanning electron microscopy (FE-SEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and confocal laser scanning microscopy (CLSM). In vivo clinical, radiographic, and micro-computed tomography (Micro-CT) with bone marrow density (BMD) analysis was performed in 8- and 16-week-old Spraque-Dawley rats with calvarial defect grafts.

CONCLUSIONS

Electron beam irradiation of bony substitutes has four main effects: the cross-linking of biphasic calcium phosphate bony apatite, chain-scissioning, the induction of rheological changes, and microbiological sterilization. These novel results and conclusions are the effects of electron beam irradiation.

Influence of sterilisation methods on collagen-based devices stability and properties

Sterilisation is essential for any implantable medical device in order to prevent infection in patients. The selection of the most appropriate sterilisation method depends on the nature and the physical state of the material to be sterilised; the influence of the sterilisation method on the properties of the device; and the type of the potential contaminant. In this context, herein we review the influence of ethylene oxide, γ-irradiation, e-beam irradiation, gas plasma, peracetic acid and ethanol on structural, biomechanical, biochemical and biological properties of collagen-based devices. Data to-date demonstrate that chemical approaches are associated with cytotoxicity, whilst physical methods are associated with degradation, subject to the device physical characteristics. Thus, the sterilisation method of choice is device dependent.

Stem Cells on Biomaterials for Synthetic Grafts to Promote Vascular Healing

This review is divided into two interconnected parts, namely a biological and a chemical one. The focus of the first part is on the biological background for constructing tissue-engineered vascular grafts to promote vascular healing. Various cell types, such as embryonic, mesenchymal and induced pluripotent stem cells, progenitor cells and endothelial- and smooth muscle cells will be discussed with respect to their specific markers. The in vitro and in vivo models and their potential to treat vascular diseases are also introduced. The chemical part focuses on strategies using either artificial or natural polymers for scaffold fabrication, including decellularized cardiovascular tissue. An overview will be given on scaffold fabrication including conventional methods and nanotechnologies. Special attention is given to 3D network formation via different chemical and physical cross-linking methods. In particular, electron beam treatment is introduced as a method to combine 3D network formation and surface modification. The review includes recently published scientific data and patents which have been registered within the last decade.

Structural study and preliminary biological evaluation on the collagen hydrogel crosslinked by γ-irradiation

Under γ-irradiation, concentrated collagen solutions yielded collagen hydrogels and liquid products. The molecular structure of collagen hydrogels and the source of the liquid products were studied. Furthermore, preliminary biological properties of the hydrogels were investigated. The results revealed that crosslinking occurred to form collagen hydrogel and the crosslinking density increased with the increasing of the absorbed dose, and the collagen hydrogels showed enhanced mechanical properties. Meanwhile, collagen underwent radiation degradation and water was squeezed out from hydrogel by contraction of hydrogel, yielding liquid products. Collagen hydrogels induced by γ-irradiation maintained the backbone structure of collagen, and tyrosine partially involved in crosslinking. The irradiated collagen hydrogels have higher denatured temperature, can promote fibroblasts proliferation, and their degradation rate in vivo depended on the absorbed dose. The comprehensive results suggested that the collagen hydrogels prepared by radiation crosslinking preserved the triple helical conformation, possessed improved thermal stability and mechanical properties, excellent biocompatibility, which is expected to favor its application as biomaterials.

Chondrogenic differentiation and immunological properties of mesenchymal stem cells in collagen type I hydrogel

Allogeneic mesenchymal stem cells (MSCs) are regarded as promising seed cells for engineering cartilage. However, few researches have covered the immune properties of seeded MSCs. Collagen has been considered as good scaffold, whether it has inherent chondrogenic inducibility for MSCs is still in debate. In this study, engineering grafts are constructed by neonatal rabbit MSCs and collagen Type I hydrogel. After periods of culture, the appearance of chondroid tissue in the grafts and the cartilage matrix-specific genes expressions of seeded cells prove the inducibility of collagen hydrogel, even if the growth factors are absence. With the differentiation, immunological properties of MSCs are changing. The expressions of main histocompatibility complex (MHC) molecules increase and the ability to inhibit the proliferation of activated lymphocytes may be declined. But to a large extent, it keeps the low stimulating to allogeneic lymphocytes and the small absolute value of MHCs. The changes are adverse for avoiding inflammation and rejection. Therefore, suitable scaffold and engineering strategies should be selected. For the grafts based on Collagen I hydrogel and MSCs, a longer culture period might not be necessary. To maintain the immune regulation, a higher initial MSCs density in engineering grafts may be more meaningful.

Low molecular weight alkyl-polycation wrapped magnetite nanoparticle clusters as MRI probes for stem cell labeling and in vivo imaging

Superparamagnetic iron oxide (SPIO) nanoparticles are potential probes for noninvasive cell tracking, but the design of safe probes coupled with high labeling efficiency is still an important objective for such application. In this study, an efficient SPIO probe has been developed for mesenchymal stem cells (MSCs) labeling and tracking. Different from many other systems involving high molecular polycations, we chose low molecular weight amphiphilic PEI2k to form stable nanocomplexes with SPIO nanoparticles. The probe can hold multiple SPIO nanoparticles with a controlled clustering structure, leading to much higher T(2) relaxivities compared to single SPIO nanoparticles. Labeled MSCs are unaffected in their viability, proliferation, or differentiation capacity. The iron uptake process in MSCs displays a time- and dose-dependent behavior. Transmission electron microscopy reveals that the nanoprobes are internalized into the cytoplasm of MSCs. Subcutaneous injection of the labeled MSCs dispersed in a collagen type I hydrogel showed strong image contrast against unlabeled cells under a clinical 3T magnetic resonance imaging (MRI) scanner up to 19 days post-transplantation. This study provides an important alternative to label MSCs at optimized low dosages with high efficiency, and the probe may be useful to label other biologically important cells for imaging studies.

Reconstruction of irradiated bone segmental defects with a biomaterial associating MBCP+(R), microstructured collagen membrane and total bone marrow grafting: an experimental study in rabbits

The bone tissue engineering models used today are still a long way from any oncologic application as immediate postimplantation irradiation would decrease their osteoinductive potential. The aim of this study was to reconstruct a segmental critical size defect in a weight-bearing bone irradiated after implantation. Six white New Zealand rabbits were immediately implanted with a biomaterial associating resorbable collagen membrane EZ(R) filled and micro-macroporous biphasic calcium phosphate granules (MBCP+(R)). After a daily schedule of radiation delivery, and within 4 weeks, a total autologous bone marrow (BM) graft was injected percutaneously into the center of the implant. All the animals were sacrificed at 16 weeks. Successful osseous colonization was found to have bridged the entire length of the defects. Identical distribution of bone ingrowth and residual ceramics at the different levels of the implant suggests that the BM graft plays an osteoinductive role in the center of the defect. Periosteum-like formation was observed at the periphery, with the collagen membrane most likely playing a role. This model succeeded in bridging a large segmental defect in weight-bearing bone with immediate postimplantation fractionated radiation delivery. This has significant implications for the bone tissue engineering approach to patients with cancer-related bone defects.

Alterations of human acellular tissue matrix by gamma irradiation: Histology, biomechanical property, stability,in vitro cell repopulation, and remodeling

AlloDerm, a processed acellular human tissue matrix, is used in a number of surgical applications for tissue repair and regeneration. In the present work, AlloDerm serves as a model system for studying gamma radiation-induced changes in tissue structure and stability as well as the effect of such changes on the cell-matrix interactions, including cell repopulation and matrix remodeling. AlloDerm tissue matrix was treated with 2-30 kGy gamma irradiation at room temperature. Gamma irradiation reduced the swelling of tissue matrix upon rehydration and caused significant structural modifications, including collagen condensation and hole formation in collagen fibres. The tensile strength of AlloDerm increased at low gamma dose but decreased with increasing gamma dosage. The elasticity of irradiated AlloDerm was reduced significantly. Calorimetric study showed that gamma irradiation destabilized the tissue matrix, resulting in greater susceptibility to proteolytic enzyme degradation. Although gamma irradiation did not affect in vitro proliferation of fibroblast cells, it promoted tissue degradation upon cell repopulation and influenced synthesis and deposition of new collagen.