Nucleation and growth of calcium phosphate on amine-, carboxyl- and hydroxyl-silane self-assembled monolayers

Biomineralization of Polyelectrolyte-Functionalized Electrospun Fibers: Optimization and In Vitro Validation for Bone Applications

In recent years, polyelectrolytes have been successfully used as an alternative to non-collagenous proteins to promote interfibrillar biomineralization, to reproduce the spatial intercalation of mineral phases among collagen fibrils, and to design bioinspired scaffolds for hard tissue regeneration. Herein, hybrid nanofibers were fabricated via electrospinning, by using a mixture of Poly ɛ-caprolactone (PCL) and cationic cellulose derivatives, i.e., cellulose-bearing imidazolium tosylate (CIMD). The obtained fibers were self-assembled with Sodium Alginate (SA) by polyelectrolyte interactions with CIMD onto the fiber surface and, then, treated with simulated body fluid (SBF) to promote the precipitation of calcium phosphate (CaP) deposits. FTIR analysis confirmed the presence of SA and CaP, while SEM equipped with EDX analysis mapped the calcium phosphate constituent elements, estimating an average Ca/P ratio of about 1.33-falling in the range of biological apatites. Moreover, in vitro studies have confirmed the good response of mesenchymal cells (hMSCs) on biomineralized samples, since day 3, with a significant improvement in the presence of SA, due to the interaction of SA with CaP deposits. More interestingly, after a decay of metabolic activity on day 7, a relevant increase in cell proliferation can be recognized, in agreement with the beginning of the differentiation phase, confirmed by ALP results. Antibacterial tests performed by using different bacteria populations confirmed that nanofibers with an SA-CIMD complex show an optimal inhibitory response against S. mutans, S. aureus, and E. coli, with no significant decay due to the effect of CaP, in comparison with non-biomineralized controls. All these data suggest a promising use of these biomineralized fibers as bioinspired membranes with efficient antimicrobial and osteoconductive cues suitable to support bone healing/regeneration.

Bone ECM-inspired biomineralization chitin whisker liquid crystal hydrogels for bone regeneration

As a particular cell niche, natural bone extracellular matrix (ECM) is an organic-inorganic composite material formed by mineralization of liquid crystal (LC) collagen fiber network. However, designing bone repair materials that highly imitate the LC characteristic and composite components of natural bone ECM is a great challenge. Here, we report a novel kind of bone ECM-inspired biomineralization chitin whisker LC hydrogels. First, photocurable chitin whisker LC hydrogels with bone ECM-like chiral nematic LC state and viscoelasticity are created. Next, biomineralization, guided by LC hydrogels, is carried out to truly mimic the mineralization process of natural bone, so as to obtain the organic-inorganic composite materials with bone ECM-like microenvironment. The chitin whisker LC hydrogels exhibit superior biomineralization, protein adsorption and osteogenesis ability, more importantly, LC hydrogel with negatively charged -COOH groups is more conducive to biomineralization and shows more desirable osteogenic activity than that with positively charged -NH₂ groups. Notably, compared with the pristine LC hydrogels, the biomineralization LC hydrogels display more favorable osteogenesis ability due to their bone ECM-like LC texture and bone-like hydroxyapatite. This study opens an avenue toward the design of bone ECM-inspired biomineralization chitin whisker LC hydrogels for bone regeneration.

Effects of Micro-Arc Oxidation Discharge Parameters on Formation and Biomedical Properties of Hydroxyapatite-Containing Flower-like Structure Coatings

The micro-arc oxidation (MAO) process was used to prepare hydroxyapatite-containing flower-like structure coatings on commercially pure titanium substrates with various values of the applied voltage (330, 390, 450 V), applied current (0.4, 0.5, 0.6 A), and duration time (1, 3, 5 min). It was found that the surface morphology of the coatings was determined primarily by the applied voltage. A voltage of 330 V yielded a flower-like/plate-like structure, while voltages of 390 V and 450 V produced a flower-like structure and a porous morphology, respectively. The applied current and duration time mainly affected the coating formation speed and petal size of the flower-like structures, respectively. The coatings prepared using voltages of 330 V and 390 V (0.6 A, 5 min) both contained Ti, TiO₂-A (anatase), TiO₂-R (rutile), DCPD (CaHPO₄·2H₂O, calcium hydrogen phosphate), and hydroxyapatite (HA). However, the latter coating contained less DCPD and had a higher HA/DCPD ratio and a Ca/P ratio closer to the ideal value of HA. The coating prepared with a voltage of 450 V consisted mainly of Ti, TiO₂-A, TiO₂-R, and CaTiO₃. For the coatings prepared with a voltage of 390 V, the flower-like structures consisted mainly of HA-containing compounds. DCPD plate-like structures were observed either between the HA-containing flower-like structures (330 V samples) or within the flower-like structures themselves (390 V samples). The coating surfaces with flower-like/plate-like or flower-like structures had a greater roughness, which increased their hydrophilicity and resulted in superior bioactivity (SBF immersion) and biocompatibility (MG-63 cell culture). The optimal biomedical performance was found in the 390 V coating due to its flower-like structure and high HA/DCPD ratio.

Behavior of Calcium Phosphate-Chitosan-Collagen Composite Coating on AISI 304 for Orthopedic Applications

Calcium phosphate/chitosan/collagen composite coating on AISI 304 stainless steel was investigated. Coatings were realized by galvanic coupling that occurs without an external power supply because it begins with the coupling between two metals with different standard electrochemical potentials. The process consists of the co-deposition of the three components with the calcium phosphate crystals incorporated into the polymeric composite of chitosan and collagen. Physical-chemical characterizations of the samples were executed to evaluate morphology and chemical composition. Morphological analyses have shown that the surface of the stainless steel is covered by the deposit, which has a very rough surface. XRD, Raman, and FTIR characterizations highlighted the presence of both calcium phosphate compounds and polymers. The coatings undergo a profound variation after aging in simulated body fluid, both in terms of composition and structure. The tests, carried out in simulated body fluid to scrutinize the corrosion resistance, have shown the protective behavior of the coating. In particular, the corrosion potential moved toward higher values with respect to uncoated steel, while the corrosion current density decreased. This good behavior was further confirmed by the very low quantification of the metal ions (practically absent) released in simulated body fluid during aging. Cytotoxicity tests using a pre-osteoblasts MC3T3-E1 cell line were also performed that attest the biocompatibility of the coating.

3D biodegradable shape changing composite scaffold with programmable porous structures for bone engineering

This study developed a biodegradable composite porous polyurethane scaffold based on polycaprolactone and polyethylene glycol by sequential in-situ foaming salt leaching and freeze-drying process with responsive shape changing performance. Biomineral hydroxyapatite (HA) was introduced into the polyurethane matrix as inorganic fillers. Infrared spectroscopy results proved a successful synthesis, scanning electron microscopy showed that the scaffold’s porosity decreased with the addition of HA while the average pore size increased. X-ray diffraction and differential scanning calorimetry showed that the addition of HA lowered the melting point of the scaffold, resulting in a transition temperature close to the human body temperature. From the bending experiments, it could be demonstrated that PUHA20 has excellent shape memory performance with shape fixity ratio >98.9% and shape recovery ratio >96.2%. Interestingly, the shape-changing capacity could be influenced by the porous structures with variation of HA content. The shape recovery speed was further accelerated when the material was immersed in phosphate buffered saline at 37 °C. Additionally, in vitro mineralization experiments showed that the scaffold incorporating HA had good osteoconductivity, and implantation assessment proved that scaffolds had good in vivo biocompatibility. This scaffold is a promising candidate for implantation of bone defects.

Inorganic Scaling in Membrane Desalination: Models, Mechanisms, and Characterization Methods

Inorganic scaling caused by precipitation of sparingly soluble salts at supersaturation is a common but critical issue, limiting the efficiency of membrane-based desalination and brine management technologies as well as other engineered systems. A wide range of minerals including calcium carbonate, calcium sulfate, and silica precipitate during membrane-based desalination, limiting water recovery and reducing process efficiency. The economic impact of scaling on desalination processes requires understanding of its sources, causes, effects, and control methods. In this Critical Review, we first describe nucleation mechanisms and crystal growth theories, which are fundamental to understanding inorganic scale formation during membrane desalination. We, then, discuss the key mechanisms and factors that govern membrane scaling, including membrane properties, such as surface roughness, charge, and functionality, as well as feedwater characteristics, such as pH, temperature, and ionic strength. We follow with a critical review of current characterization techniques for both homogeneous and heterogeneous nucleation, focusing on the strengths and limitations of each technique to elucidate scale-inducing mechanisms, observe actual crystal growth, and analyze the outcome of scaling behaviors of desalination membranes. We conclude with an outlook on research needs and future research directions to provide guidelines for scale mitigation in water treatment and desalination.

A Polyplex in a Shell: The Effect of Poly(aspartic acid)-Mediated Calcium Carbonate Mineralization on Polyplexes Properties and Transfection Efficiency

Mineralization by exposure of organic templates to supersaturated solutions is used by many living organisms to generate specialized materials to perform structural or protective functions. Similarly, it was suggested that improved robustness acquired through mineralization under natural conditions could be an important factor for virus survival outside of a host for better transfection of cells. Here, inspired by this fact, we developed a nonviral tricomponent polyplex system for gene delivery capable of undergoing mineralization. First, we fabricated anionic polyplexes carrying pDNA by self-assembly with a lipid-modified cationic polymer and coating by poly(aspartic acid). Then, we submitted the polyplexes to a two-step mineralization reaction to precipitate CaCO₃ under various supersaturations. We carried out detailed morphological studies of the mineralized polyplexes and identified which parameters of the fabrication process were influential on transfection efficiency. We found that mineralization with CaCO₃ is efficient in promoting transfection efficiency as long as a certain Ca²⁺/CO₃^2- lower limit ratio is respected. However, calcium incubation can also be used to achieve similar effects at higher concentrations depending on polyplex composition, probably due to the formation of physical cross-links by calcium binding to poly(aspartic acid). We proposed that the improved robustness and transfection efficiency provided by means of mineralization can be used to expand the possible applications of polyplexes in gene therapy.

Mineralized vectors for gene therapy

There is an intense interest in developing materials for safe and effective delivery of polynucleotides using non-viral vectors. Mineralization of organic templates has long been used to produce complex materials with outstanding biocompatibility. However, a lack of control over mineral growth has limited the applicability of mineralized materials to a few in vitro applications. With better control over mineral growth and surface functionalization, mineralized vectors have advanced significantly in recent years. Here, we review the recent progress in chemical synthesis, physicochemical properties, and applications of mineralized materials in gene therapy, focusing on structure-function relationships. We contrast the classical understanding of the mineralization mechanism with recent ideas of mineralization. A brief introduction to gene delivery is summarized, followed by a detailed survey of current mineralized vectors. The vectors derived from calcium phosphate are articulated and compared to other minerals with unique features. Advanced mineral vectors derived from templated mineralization and specialty coatings are critically analyzed. Mineral systems beyond the co-precipitation are explored as more complex multicomponent systems. Finally, we conclude with a perspective on the future of mineralized vectors by carefully demarcating the boundaries of our knowledge and highlighting ambiguous areas in mineralized vectors. STATEMENT OF SIGNIFICANCE: Therapy by gene-based medicines is increasingly utilized to cure diseases that are not alleviated by conventional drug therapy. Gene medicines, however, rely on macromolecular nucleic acids that are too large and too hydrophilic for cellular uptake. Without tailored materials, they are not functional for therapy. One emerging class of nucleic acid delivery system is mineral-based materials. The fact that they can undergo controlled dissolution with minimal footprint in biological systems are making them attractive for clinical use, where safety is utmost importance. In this submission, we will review the emerging synthesis technology and the range of new generation minerals for use in gene medicines.

Photoresponsive behaviour of zwitterionic polymer particles with photodimerizable groups on their surfaces

Polymer particles with precise diameters have been used as building blocks for fabricating well-defined and nanostructured materials. Polymer particles as building blocks for medical applications require both easily spatiotemporal manipulation and good biocompatibility. In this study, we designed zwitterionic polymer particles with photodimerizable groups on their surfaces and used ultraviolet (UV) light irradiation to photo-assemble them in aqueous media. After synthesizing zwitterionic polymer particles with diameters ranging from 100-200 nm via soap-free emulsion polymerization, maleimide moieties as photodimerizable groups were introduced onto the particle surfaces. UV light irradiation to an aqueous dispersion of zwitterionic polymer particles with photodimerizable groups induced their photo-assembling because interparticle bonding forms by photodimerization of the photodimerizable groups on the particle surfaces. The zwitterionic surface of their particle-assembled films effectively suppressed protein adsorption, cell adhesion, and platelet adhesion. The photoresponsive behaviour and bioinert surface of the zwitterionic polymer particles with photodimerizable groups indicate that they have several potential applications as bioinert building blocks for designing well-defined and nanostructured biomaterials used in biosensors, bioseparation and cell culture, and for modifying and repairing biomaterial surfaces in situ.

Enhanced biomineralization of shape memory composite scaffolds from citrate functionalized amorphous calcium phosphate for bone repair

Traditional shape memory polymers (SMPs) could avoid large volume trauma during implantation; however, for bone repair, scaffolds with high porosity and biomineralization are essential to promote bone regeneration. A novel porous composite scaffold with high biomineralization activity was developed by sequential gas foaming and a freeze-drying method. The results showed that the cross-linked block structure of the polymer matrix presented excellent shape memory properties, and osteogenesis was promoted by citrate functionalized amorphous calcium phosphate (CCACP). CCACP improved the mechanical strength of the scaffold, and the synergistic effect of CCACP and PEG promotes hydrophilicity and further promoted cell adhesion. Bending experiments indicated that the shape-memory effect of the scaffolds could be varied by varying the CCACP content. In addition, hydroxyapatite deposition was sped up as CCACP accelerated the mineralization of the scaffolds. Moreover, the result of the CCK-8 assessment suggested that composite scaffolds exhibited high biocompatibility, and the cells extended out abundant filopodia to adhere onto the scaffolds. In rat bone defect models, the obtained scaffolds promoted new bone formation compared to the control group. The developed composite scaffolds show potential for minimally invasive bone repair application.

Unraveling the surface properties of PMMA/azobenzene blends as coating films with photoreversible surface polarity

Various reports demonstrated that azobenzene derivatives are the chromophore of choice in photoresponsive surfaces showing reversible surface polarity. Hitherto the surface study of coating films based on polymer/azobenzene blends using contact angle measurements remained unexplored. To provide insight into the surface polarity of polymer/dye blend films, poly(methyl methacrylate) (PMMA) blends containing photoresponsive 4-hydroxy-4′-methylazobenzene (AZO1) and 4,4′-dimethylazobenzene (AZO2) as coating films on clear glass substrates are investigated in this work. Contact angle measurements were carried out to unravel the role of substituents in the surface polarity and the orientation of chromophores in the coating matrices before and after UV light (λ_max = 365 nm) irradiation. Changes in water contact angles measured on the PMMA/azobenzene coating films indicated that the surface polarity is reversible as the chromophores underwent reversible trans–cis isomerisation. It has been revealed that the repeated trans–cis isomerisation led to the random reorientation and arrangement of chromophores in PMMA/AZO1 coating films. Then, to indicate the possibility of the disruption of interfacial interactions due to the repeated trans–cis isomerisation processes, as a proof of concept experiment, it is shown that the commercial acrylic-based pressure-sensitive sticker which adhered strongly to the PMMA/AZO1(13) coating film is peeled off from the coating surface after being subjected to a cycle of UV light irradiation for 12 hours, followed by dark conditions for another 12 hours within 14 days. The proof of concept study will lead to more development of smart photoresponsive coating films using simple polymer/dye blends.

A repeated trans–cis isomerisation led to the random reorientation and arrangement of chromophores in PMMA/azobenzene blends as coating films.

Direct Current Stimulation for Improved Osteogenesis of MC3T3 Cells Using Mineralized Conductive Polyaniline

Hydroxyapatites (HAPs) are usually coated on the surface of an implant to improve the osseointegration with defect bone tissue. Besides, conducting polymers have the advantages of good conductivity, reasonable biocompatibility, and easy of modification, which endow them applicable to electrical stimulation therapy. However, it still remains a great challenge to fabricate hybrid coating combing HAP with conducting polymer on implant surface efficiently. In this work, phytic acid-doped polyaniline (PANI) were successfully synthesized on medical titanium (Ti) sheets. By virtue of the abundant anodic phosphoric groups of phytic acid, HAP nanocrystals were biomineralized on PANI. The PANI-HAP hybrid layer exhibits good cell compatibility with MC3T3 cells. More importantly, HAP nanocrystals and PANI operate synergistically on cell proliferation and osteogenesis through electrical stimulation. Alkaline phosphatase activity and extracellular calcium contents of cells on PANI-HAP display 3-fold and 2.6-fold increases, compared with bare Ti sheets, respectively. The valid integration of mineralization and electrical stimulation in this work renders an efficient strategy for implant coating, which might have potential applications in bone-related defects.

Human dentin characteristics of patients with osteogenesis imperfecta: insights into collagen-based biomaterials

Osteogenesis imperfecta (OI), also known as "brittle bone disease", is a rare genetic disorder of the skeleton, whose most benign form I corresponds to autosomal dominant mutations in the genes encoding type I collagen (COLA1, COLA2). Several associated skeletal manifestations are often observed but, surprisingly, while dentin defects often reflect genetic bone disorders, about half of OI patients have no obvious oral manifestations. Here, we investigated the collagen, mineral and mechanical properties of dentin from deciduous teeth collected from patients with mild form of OI and displaying no obvious clinical signs of dentinogenesis imperfecta. For the first time, an increase in the hardness of OI dentin associated with an increase in mineral content compared to healthy patients was reported. In addition, OI altered the tissue characteristics of the dentin-enamel junction but the interfacial gradient was preserved. The impact of changes in molecular structure due to mutations in OI was assessed by Raman microspectroscopy. Our results highlighted a change in the hydroxyproline-proline ratio in direct association with collagen mineralization. Our findings suggest that the evaluation of teeth could be an important aid for mild types of OI that are often difficult to diagnose clinically and provide experimental evidence that hydroxyproline content should be considered in future studies on collagen-based biomaterials.

Predominant Effect of Material Surface Hydrophobicity on Gypsum Scale Formation

Scale formation is an important challenge in water and wastewater treatment systems. However, due to the complex nature of membrane surfaces, the effects of specific membrane surface characteristics on scale formation are poorly understood. In this study, the independent effect of surface hydrophobicity on gypsum (CaSO₄·2H₂O) scale formation via surface-induced nucleation and bulk homogeneous nucleation was investigated using quartz crystal microbalance with dissipation (QCM-D) on self-assembled monolayers (SAMs) terminated with -OH, -CH₃, and -CF₃ functional groups. Results show that higher surface hydrophobicity enhances both surface-induced nucleation of gypsum and attachment of gypsum crystals formed from homogeneous nucleation in the bulk solution. The enhanced surface-induced nucleation is attributed to the lower nucleation energy barrier on a hydrophobic surface, while the increased gypsum crystal attachment results from the favorable hydrophobic interactions between gypsum and more hydrophobic surfaces. Contrary to previous findings, the role of Ca²⁺ adsorption in surface-induced nucleation was found to be relatively small and similar on the different SAMs. Therefore, increasing material hydrophilicity is a potential approach to reduce gypsum scaling.

Nano-Silicate-Reinforced and SDF-1α-Loaded Gelatin-Methacryloyl Hydrogel for Bone Tissue Engineering

Purpose

Autologous bone grafts are the gold standard for treating bone defects. However, limited bone supply and morbidity at the donor site restrict its extensive use. Therefore, developing bone graft materials as an alternative to autologous grafts has gained considerable attention. Injectable hydrogels endowed with osteogenic potential have the ability to fill irregular bone defects using minimally invasive procedures and have thus been attracting researchers’ attention. However, from a clinical perspective, most fabrication methods employed for the current injectable osteogenic hydrogels are difficult and inconvenient. In the current study, we fabricated an injectable osteogenic hydrogel using a simple and convenient strategy.

Materials and Methods

Gelatin-methacryloyl (GelMA) pre-polymer was synthetized. Nano silicate (SN) and stromal cell-derived factor-1 alpha (SDF-1α) were introduced into the pre-polymer to achieve injectability, controlled release property, excellent osteogenic ability, and efficient stem cell homing.

Results

The GelMA-SN-SDF-1α demonstrated excellent injectability via a 17-G needle at room temperature. The loaded SDF-1α exhibited a long-term controlled release pattern and efficiently stimulated MSC migration and homing. The GelMA-SN-SDF-1α hydrogel amplified cell spreading, migration, osteogenic-related biomarker expression, and matrix mineralization. The GelMA-SN-SDF-1α hydrogel filled critical-sized calvaria defects in rats and demonstrated excellent bone regeneration ability, as assessed using micro-CT scanning and histomorphometric staining.

Conclusion

The GelMA-SN-SDF-1α hydrogel provides a simple and convenient strategy for the fabrication of injectable osteogenic graft materials.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/FhyefSKUa34

Investigation of the recognition interaction between glycated hemoglobin and its aptamer by using surface plasmon resonance

Glycated hemoglobin (HbA1c) has been widely explored as an important marker for monitoring and diagnosing diabetes. Due to the advantages of high selectivity, easy preparation, and convenient preservation of aptamers, research on glycated hemoglobin detection utilizing aptasensors has received much attention in recent years. However, factors such as the pH and the salt concentration of the solution and the structure of the aptamer could influence the interactions between HbA1c and the aptamer. In this study, the factors were evaluated using surface plasmon resonance (SPR). The results show that the pH and the salt concentration can greatly affect the formation of a complex between the aptamer and HbA1c. In the stereostructure of the aptamer, loop L1 may be an important motif for recognizing glycated hemoglobin. In addition, the best condition for detecting HbA1c was at pH 6, with a high sensitivity and a low limit of detection(LOD) (1.06 × 10^-3RUnM /2.55 nM). The results also demonstrated that the use of an SPR aptamer biosensor can be a sensitive technique to improve the accuracy and correctness of HbA1c measurement.

Antibacterial and hydroxyapatite-forming coating for biomedical implants based on polypeptide-functionalized titania nanospikes

Titanium (Ti)-based implants often suffer from detrimental bacterial adhesion and inefficient healing, so it is crucial to design a dual-functional coating that prevents bacterial infection and enhances bioactivity for a successful implant. Herein, we successfully devised a cationic polypeptide (Pep)-functionalized biomimetic nanostructure coating with superior activity, which could not only kill pathogenic bacteria rapidly and inhibit biofilm formation for up to two weeks, but also promote in situ hydroxyapatite (HAp) formation. Specifically, a titania (TiO2) nanospike coating (TNC) was fabricated by alkaline hydrothermal treatment firstly, followed by immobilization of rationally synthesized Pep via robust coordinative interactions, named TNPC. This coating was able to effectively kill (>99.9%) both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria, while being non-toxic to murine MC3T3-E1 osteoblastic cells. Furthermore, the in vivo infection studies denoted that the adherent bacteria numbers on the TNPC implants were significantly reduced by 6 orders of magnitude than those on the pure Ti implants (p < 0.001). Importantly, in the presence of cationic amino groups and residual Ti-OH groups, substantial HAp deposition on the TNPC surface in Kokubo's simulated body fluid (SBF) occurred after 14 days. Altogether, our results support the clinical potential of this biomimetic dual-functional coating as a new approach with desirable antibacterial properties and HAp-forming ability in orthopedic and dental applications.

Mineralization of calcium phosphate controlled by biomimetic self-assembled peptide monolayers via surface electrostatic potentials

The functions of acidic-rich domains in non-collagenous protein during biomineralization are thought to induce nucleation and control the growth of hydroxyapatite. The tripeptide Asp-Ser-Ser (DSS) repeats are the most common acidic-rich repeated unit in non-collagenous protein of dentin phosphoprotein, the functions of which have aroused extensive interests. In this study, biomimetic peptides (DSS)_n (n = 2 or 3) were designed and fabricated into self-assembled monolayers (SAMs) on Au (111) surface as biomimetic organic templates to regulate hydroxyapatite (HAp) mineralization in 1.5 simulated body fluid (1.5 SBF) at 37 °C. The early mineralization processes and minerals deposited on the SAMs were characterized by X-ray diffraction, scanning electron microscope, and Fourier transform infrared spectroscopy analyses. The SAM-DSS9/DSS9G showed the highest capacity to induce HAp nucleation and growth, followed by SAM-DSS6/DSS6G, SAM-COOH, and SAM-OH. The SAM-(DSS)_n had more negative zeta potentials than SAM-COOH surface, indicating that DSS repeats contributed to the biomineralization, which not only provided strong affinity with Ca²⁺ ions through direct electrostatic bonds, but more importantly influence surface electrostatic potentials of the assembled organic template for nucleation.

•

Biomimetic peptides designed from DPP and self-assembled to form SAMs.

•

Quantitative model for HAp mineralization regulated by non-collagenous protein.

•

Extra DSS repeat reduced the zeta potential on the SAM surface.

•

The nuclei quantity and mineral size on DSS9/DSS9G were always larger.

•

DSS repeats provided surface electrostatic potentials for stronger Ca²⁺ affinity.

Recent advances and future perspectives of sol–gel derived porous bioactive glasses: a review

Sol–gel derived bioactive glasses have been extensively explored as a promising and highly porous scaffold materials for bone tissue regeneration applications owing to their exceptional osteoconductivity, osteostimulation and degradation rates.

Stable ZnO-doped hydroxyapatite nanocoating for anti-infection and osteogenic on titanium

Titanium and titanium alloys have been widely used in orthopedics and related fields. However, their clinical applications are limited due to the lack of anti-infection, osteoinductivity and angiogenic ability. In the present study, we utilized pulse electrochemical deposition method to prepare polypyrrole (PPy) by the in-situ oxidative polymerization of pyrrole (Py), and through the coordination and doping of ions, the function of PPy as a dual regulator of hydroxyapatite nanoparticles (HA-NPs) and zinc oxide nanoparticles (ZnO-NPs) was achieved. Bioactivity test showed that the composite coating could induce the formation of apatite, and the apatite was in a neat arrangement preferentially grew along the (002) crystal plane, indicating good bioactivity. The release test showed that the dual regulation effect of PPy coordination and doping reduced the release rate of Ca²⁺ and Zn²⁺ from the composite coating. Antibacterial tests showed that the composite coating against Escherichia coli and Staphylococcus aureus. Besides, bone marrow-derived mesenchymal stem cells (BMSCs) exhibited good adhesion, proliferation and differentiation on the composite coating, and fluorescence staining experiments demonstrated good osteoinductivity of the composite coating. In this study, a multifunctional composite coating with anti-infection, angiogenic and osteoinductivity was successfully constructed on the titanium surface via pulse electrochemical deposition method.

Effect of Biomaterial Electrical Charge on Bone Morphogenetic Protein-2-Induced In Vivo Bone Formation

IMPACT STATEMENT

Biomaterials can play a dual role in bone regeneration: they enable local sustained delivery of growth factors, such as bone morphogenetic protein-2 (BMP-2), while they provide structural support as scaffold. By better imitating the properties of native bone tissue, scaffolds may be both osteoconductive and osteoinductive. The latter can be achieved by modifying the electrical charge of the surface. The present work uses tunable oligo[(polyethylene glycol) fumarate] hydrogel and demonstrates that negative charge enhances BMP-2-induced bone formation compared with neutral or positive charge. Altogether, this indicates that tissue-specific surface charge modifications of biomaterials hold great promise in the field of tissue regeneration.

Fabrication of biocomposite scaffolds made with modified hydroxyapatite inclusion of chitosan-grafted-poly(methyl methacrylate) for bone tissue engineering

In the present study, composite scaffolds of chitosan-graft-poly(methyl methacrylate) (Chi-g-PMMA) and mineral ions-loaded hydroxyapatite (mHA) (obtained by the hydrothermal treatment of hydroxyapatite (HA) in a simulated body fluid (SBF) solution (mHA@Chi-g-PMMA)) were prepared by the blending method. The physical properties, bioactivity, biological properties and their capabilities for sustained drug and protein release were studied. Physicochemical analysis showed a successful incorporation of the mineral ions in the HA particles and a good distribution of the mHA within the Chi-g-PMMA polymer matrix. The compressive strength and the Young's modulus were 15.760 ± 0.718 and 658.452 ± 17.020 MPa, respectively. In bioactivity studies, more apatite formation on the surface were seen after immersion in the SBF solution. In vitro growth experiments using UMR-106 osteoblast-like cells on the mHA@Chi-g-PMMA scaffold case showed that the attachment, viability and proliferation of the cells on the scaffolds had improved after 7 d of immersion. The in vitro release of two compounds (the cancer drug, doxorubicin (DOX)) and bovine serum albumin (BSA)), which had been attached to separate mHA@Chi-g-PMMA scaffolds, were studied to determine their suitability as drug delivery vehicles. It was found that the sustained release of DOX was 73.95% and of BSA was 57.27% after 25 h of incubation. These experimental results demonstrated that the mHA@Chi-g-PMMA composite can be utilized as a scaffold for bone cells ingrowth and also be used for drug delivery during the bone repairing.

Antimicrobial Titanium Surface via Click-Immobilization of Peptide and Its in Vitro/Vivo Activity

The use of antimicrobial peptides (AMPs)-functionalized titanium implants is an efficient method for preventing bacterial infection. However, the attachment of AMPs to the surface of titanium implants remains a challenge. In this study, a "clickable" titanium surface was developed by using a silane coupling agent with an alkynyl group. The antimicrobial titanium implant was then constructed through the reaction between the "clickable" surface and azido-AMPs (PEG-HHC36:N₃-PEG₁₂-KRWWKWWRR) via click chemistry of Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). Such an antimicrobial titanium implant, with an AMP density of 897.4 ± 67.3 ng/cm² (2.5 ± 0.2 molecules per nm²) on the surface, exhibited good and stable antimicrobial activity, inhibited 90.2% of Staphylococcus aureus and 88.1% of Escherichia coli after 2.5 h of incubation, and even inhibited 69.5% of Staphylococcus aureus after 4 days of degradation. The CCK-8 assay indicated that the antimicrobial titanium implant exhibited negligible cytotoxicity to mouse bone mesenchymal stem cells. In vivo assay illustrated that this implant could kill 78.8% of Staphylococcus aureus after 7 days. This method has great potential for the preparation of antimicrobial titanium implants and the prevention of infections in the clinic.

Synergistic effects of VE-TPGS and riboflavin in crosslinking of dentine

OBJECTIVE

Effect of d-alpha-tocopheryl poly(ethyleneglycol)-1000-succinate (VE-TPGS) with riboflavin-5'-phosphate solution on crosslinking of dentine collagen was investigated to analyze collagen's structural integrity.

METHODS

VE-TPGS was added to RF-solution, at RF/VE-TPGS (w/w) ratios of 0.125/0.250 and 0.125/0.500. Demineralized dentine beams were used (10wt.% phosphoric acid), rinsed using deionized-water and analysed using ELISA (Human MMP2 ELISA; Human CTSK/Cathepsin-K for MMP2 and Cathepsin K analysis). AFM of dentine collagen-fibrils structure was done before and after dentine specimens' placement in mineralization solution and tested after 14days in artificial saliva/collagenase (AS/Co) solution. The specimens were tested after 24h in mineralization solution for surface/bulk elastic modulus. Nano-indentation was carried out for each specimen on intertubular-dentine with lateral spacing of 400nm. Reduced elastic-modulus and nano-hardness were calculated and collagen content was determined using hydroxyproline-assay. Micro-Raman were performed. TEM was carried out to study structural variations of dentine-collagen in artificial-saliva (collagenase). Data were presented as mean±standard deviation and analyzed by SPSS v.15, by analysis of variance.

RESULTS

Synergetic effect of VE-TPGS was observed with RF through higher structural integrity of dentine collagen-fibrils shown by TEM/AFM. Superior surface/bulk mechanical stability was shown by nano-indentation/mechanical testing. Improvement in collagenase degradation resistance for hydroxyproline release was observed and lower endogenous-protease release of MMP-2/Cathepsin-K. Raman-analysis analysed chemical interactions between RF and collagen confirming structural-integrity of collagen fibrils after crosslinking. After 24h mineralization, AFM showed mineral depositions in close association with dentine-collagen fibrils with RF/VE-TPGS formulations.

SIGNIFICANCE

Potential synergetic effect of RF/VE-TPGS was observed by reflection of higher structural integrity and conformational-stability of dentine-collagen fibrils.

Nanotribological Study of Supramolecular Template Networks Induced by Hydrogen Bonds and van der Waals Forces

Nanotribology has been given increasing attention by researchers in pursuing the nature of friction. In the present work, an approach that combines the supramolecular assembly and nanotribology is introduced. Herein, the nanotribological study was carried out on seven supramolecular template networks [namely, hydrogen bond induced tricarboxylic acids and van der Waals force induced hexaphenylbenzene (HPB) derivatives]. The template networks, as well as the host-guest assemblies of template molecules induced by different forces, were constructed on the highly oriented pyrolytic graphite (HOPG) surface and explicitly characterized using scanning tunneling microscopy (STM). Meanwhile, the nanotribological properties of the template networks were measured using atomic force microscopy (AFM). Together with the theoretical calculation using the density functional theory (DFT) method, it was revealed that the friction coefficients were positively correlated with the interaction strength. The frictional energy dissipation mainly derives from both the intermolecular interaction energy and the interaction energy between molecules and the substrate. The efforts not only help us gain insight into the competitive mechanisms of hydrogen bond and van der Waals force in supramolecular assembly but also shed light on the origin of friction and the relationship between the assembly structures and the nanotribological properties at the molecular level.

Replication and bioactivation of Ti-based alloy scaffold macroscopically identical to cancellous bone from polymeric template with TiNbZr powders

In the present work, a new type of porous Ti-based alloy scaffold with high porosity (about 75%) and interconnected pores in the range of 300-1000 µm was fabricated by polymeric foam replication method with TiNbZr powders. This porous scaffold, which is consisted with major β phase Ti and minor α Ti phase, exhibits a compressive strength of 14.9 MPa and an elastic modulus of 0.21 GPa, resembling the mechanical properties of nature human cancellous bone (σ = 10-50 MPa, E = 0.01-3.0 GPa). To improve its osteogenic potential, a bioactive nanostructural titanate network coating was applied to the scaffold surface using hydrothermal treatment. The bone-like apatite inducing ability of the treated scaffold was systemically assessed using SBF immersion during 3-28 days. The nanostructural titanate network coated on porous TiNbZr scaffold is favorable for apatite nucleation and subsequent growth due to the hydrolysis of titanate. The results suggest that highly porous TiNbZr scaffolds with an appropriate bioactive coating, which was fabricated in this study, could be potentially used for bone tissue engineering application.

Polydopamine-assisted chlorhexidine immobilization on medical grade stainless steel 316L: Apatite formation and in vitro osteoblastic evaluation

Immobilization of chlorhexidine (CHX) on stainless steel 316L (SS316L), assisted by a polydopamine film as an intermediate layer is projected as an approach in combating infection while aiding bone regeneration for coating development on orthopedic and dental implants. This study aimed to investigate the ability of CHX coating to promote apatite layer, osteoblast cells viability, adhesion, osteogenic differentiation and mineralization. Stainless steel 316L disks were pre-treated, grafted with a polydopamine film and immobilized with different concentrations of CHX (10-30mM). The apatite layer formation was determined through an in vitro simulated body fluid (SBF) test by ATR-FTIR and SEM-EDX analyses. The osteoblastic evaluations including cells viability, cells adhesion, osteogenic differentiation and mineralization were assessed with human fetal osteoblast cells through MTT assay, morphology evaluation under FESEM, ALP enzyme activity and Alizarin Red S assay. The apatite layer was successfully formed on the CHX coated disks, demonstrating potential excellent bioactivity property. The CHX coatings were biocompatible with the osteoblast cells at low CHX concentration (<20mM) with good adhesion on the metal surfaces. The increment of ALP activity and calcium deposition testified that the CHX coated disks able to support osteoblastic maturation and mineralization. These capabilities give a promising value to the CHX coating to be implied in bone regeneration area.

Effect of divalent versus monovalent cations on the MS2 retention capacity of amino-functionalized ceramic filters

Ceramic capillary membranes conditioned for virus filtration via functionalization with n-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA) are analyzed with respect to their virus retention capacity when using feed solutions based on monovalent and divalent salts (NaCl, MgCl2). The log reduction value (LRV) by operating in dead-end mode using the model bacteriophage MS2 with a diameter of 25 nm and an IEP of 3.9 is as high as 9.6 when using feeds containing MgCl2. In contrast, a lesser LRV of 6.4 is observed for feed solutions based on NaCl. The TPDA functionalized surface is simulated at the atomistic scale using explicit-solvent molecular dynamics in the presence of either Na+ or Mg2+ ions. Computational prediction of the binding free energy reveals that the Mg2+ ions remain preferentially adsorbed at the surface, whereas Na+ ions form a weakly bound dissolved ionic layer. The charge shielding between surface and amino groups by the adsorbed Mg2+ ions leads to an upright orientation of the TPDA molecules as opposed to a more tilted orientation in the presence of Na+ ions. The resulting better accessibility of the TPDA molecules is very likely responsible for the enhanced virus retention capacity using a feed solution with Mg2+ ions.

The optimization and production of stable homogeneous amine enriched surfaces with characterized nanotopographical properties for enhanced osteoinduction of mesenchymal stem cells

Silane modification has been proposed as a powerful biomaterial surface modification tool. This is the first comprehensive investigation into the effect of silane chain length on the resultant properties of -NH₂ silane monolayers and the associated osteoinductive properties of the surface. A range of -NH₂ presenting silanes, chain length 3-11, were introduced to glass coverslips and characterized using water contact angles, atomic force microscopy, X-ray photoelectron spectroscopy, and Ninhydrin assays. The ability of the variation in chain length to form a homogenous layer across the entirety of the surfaces was also assessed. The osteoinductive potential of the resultant surfaces was evaluated by real-time polymerase chain reaction, immunocytochemistry, and von Kossa staining. Control of surface chemistry and topography was directly associated with changes in chain length. This resulted in the identification of a specific, chain length 11 (CL11) which significantly increased the osteoinductive properties of the modified materials. Only CL11 surfaces had a highly regular nano-topography/roughness which resulted in the formation of an appetite-like layer on the surface that induced a significantly enhanced osteoinductive response (increased expression of osteocalcin, CBFA1, sclerostin, and the production of a calcified matrix) across the entirety of the surface. © 2018 The Authors Journal of Biomedical Materials Research Part A Published by Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1862-1877, 2018.

Accelerated Development of Hippocampal Neurons and Limited Adhesion of Astrocytes on Negatively Charged Surfaces

This work examines the development of primary neurons and astrocytes on thoroughly controlled functional groups. Negatively charged surfaces presenting carboxylate (COO^-) or sulfonate (SO₃^-) groups prove beneficial to neuronal behavior, in spite of their supposed repulsive electrostatic interactions with cellular membranes. The adhesion and survival of primary hippocampal neurons on negatively charged surfaces are comparable to or slightly better than those on positively charged (poly-d-lysine-coated) surfaces, and neuritogenesis and neurite outgrowth are accelerated on COO^- and SO₃^- surfaces. Moreover, such favorable influences of the negatively charged surfaces are only seen in neurons but not for astrocytes. Our results indicate that the in vitro developmental behavior of primary hippocampal neurons is sophisticatedly modulated by angstrom-sized differences in chemical structure or the charge density of the surface. We believe that this work provides new implications for understanding neuron-material interfaces as well as for establishing new ways to fabricate neuro-active surfaces.

Multifunctional HA/Cu nano-coatings on titanium using PPy coordination and doping via pulse electrochemical polymerization

An anti-wear and antibacterial hydroxyapatite nanoparticle bioactive coating on a titanium matrix is fabricated through hydroxyapatite/copper nanoparticle co-deposition.

Hydrothermal treatment and butylphosphonic acid derived self-assembled monolayers for improving the surface chemistry and corrosion resistance of AZ61 magnesium alloy

The hydrothermal treatment followed by a self-assembled monolayer (SAM) of 1-butylphosphonic acid through the tethering by aggregation and growth (T-BAG) method was employed to produce protective surface coatings on the Mg-6Al-1Zn alloy (AZ61) for reducing the degradation rate in physiological environments. Potentiodynamic polarization measurements revealed that the organic self-assembled monolayer and Mg(OH)₂ coating can further enhance the surface chemical stability and corrosion resistance of Mg alloys. SAM-treated Mg(OH)₂ coatings can be served as a more passive surface layer as a result of their much higher charge transfer resistance and the presence of Warburg impedance in electrochemical impedance spectroscopy measurement.

Nanostructured interfacial self-assembled peptide-polymer membranes for enhanced mineralization and cell adhesion

Soft interfacial materials, such as self-assembled polymer membranes, are gaining increasing interest as biomaterials since they can provide selective barriers and/or controlled affinity interactions important to regulate cellular processes. Herein, we report the design and fabrication of multiscale structured membranes integrating selective molecular functionalities for potential applications in bone regeneration. The membranes were obtained by interfacial self-assembly of miscible aqueous solutions of hyaluronan and multi-domain peptides (MDPs) incorporating distinct biochemical motifs, including mineralizing (EE), integrin-binding (RGDS) and osteogenic (YGFGG) peptide sequences. Circular dichroism and Fourier transform infrared spectroscopy analyses of the MDPs revealed a predominant β-sheet conformation, while transmission electron microscopy (TEM) showed the formation of fibre-like nanostructures with different lengths. Scanning electron microscopy (SEM) of the membranes showed an anisotropic structure and surfaces with different nanotopographies, reflecting the morphological differences observed under TEM. All the membranes were able to promote the deposition of a calcium-phosphate mineral on their surface when incubated in a mineralizing solution. The ability of the MDPs, coated on coverslips or presented within the membranes, to support cell adhesion was investigated using primary adult periosteum-derived cells (PDCs) under serum-free conditions. Cells on the membranes lacking RGDS remained round, while in the presence of RGDS they appear to be more elongated and anchored to the membrane. These observations were confirmed by SEM analysis that showed cells attached to the membrane and exhibiting an extended morphology with close interactions with the membrane surface. We anticipate that these molecularly designed interfacial membranes can both provide relevant biochemical signals and structural biomimetic components for stem cell growth and differentiation and ultimately promote bone regeneration.

Biomineralization of a titanium-modified hydroxyapatite semiconductor on conductive wool fibers

Metal ions are frequently incorporated into crystalline materials to improve their electrochemical properties and to confer new physicochemical properties. Naturally-occurring phosphate apatite, which is formed geologically and in biomineralization processes, has extensive potential applications and is therefore an attractive functional material. In this study, we generate a novel building block for flexible optoelectronics using bio-inspired methods to deposit a layer of photoactive titanium-modified hydroxyapatite (TiHA) nanoparticles (NPs) on conductive polypyrrole(PPy)-coated wool yarns. The titanium concentration in the reaction solution was varied between 8-50 mol% with respect to the phosphorous, which led to titanate ions replacing phosphate in the hydroxyapatite lattice at levels up to 17 mol%. PPy was separately deposited on wool yarns by oxidative polymerization, using two dopants: (i) anthraquinone-2,6-disulfonic acid to increase the conductivity of the PPy layer and (ii) pyroglutamic acid, to reduce the resistivity of the wool yarns and to promote the heterogeneous nucleation of the TiHA NPs. A specific titanium concentration (25 mol% wrt P) was used to endow the TiHA NPs on the PPy-coated fibers with a desirable band gap value of 3.68 eV, and a specific surface area of 146 m² g^-1. This is the first time that a thin film of a wide-band gap semiconductor has been deposited on natural fibers to create a fiber-based building block that can be used to manufacture flexible electronic devices.

In vitro mineralization of dual grafted polytetrafluoroethylene membranes

The modification of biomaterials by radiation induced grafting is a promising method to improve their bioactivity. Successful introduction of carboxyl and amine functional groups on the surface of a polytetrafluoroethylene membrane was achieved by grafting of acrylic acid (AA) and 2-aminoethyl methacrylate hydrochloride (AEMA) using simultaneous gamma irradiation grafting. Chemical characterization by attenuated total reflectance Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy confirmed the presence of amine and carboxylate functionalities and indicated that all protonated amines formed ion pairs with carboxyl groups, but not all carboxyl are involved in ion pairing. It was found that the irradiation doses (2, 5, or 10 kGy) affected the grafting outcome only when sulfuric acid (0.5 or 0.9 M) was added as a polymerization enhancer. The use of the inorganic acid successfully enhanced the total graft yield (GY), but the changes in the graft extent (GE) were not conclusive. Dual functional films were produced by either a one- or a two-step process. Generally, higher GY and GE values were observed for the samples produced by the two-step grafting of AA and AEMA. The in vitro mineralization in 1.5× simulated body fluid (SBF) induced the formation of carbonated hydroxyapatite as verified by FITR. All samples showed an increase in weight after mineralization with significantly larger increases observed for the samples which had the 1.5× SBF changed every third day compared to every seventh. For the dual functional samples, it was found that the sample grafted by the one-step method shows a significantly higher increase in weight despite a much lower GY compared to the sample prepared by the two-step method and this was attributed to the different architecture of grafted chains.

In vitro osteogenic induction of bone marrow mesenchymal stem cells with a decellularized matrix derived from human adipose stem cells and in vivo implantation for bone regeneration

Tissue engineering technology that adopts mesenchymal stem cells combined with scaffolds presents a promising strategy for tissue regeneration.

In vitro study of the host responses to model biomaterials via a fibroblast/macrophage co-culture system

Macrophages promote wound healing/fibrotic responses by up-regulation of fibroblast outgrowth and α-SMA expression to different levels on different model biomaterials.

Osteolytic and mixed cancer metastasis modulates collagen and mineral parameters within rat vertebral bone matrix

Metastatic involvement in vertebral bone diminishes the mechanical integrity of the spine; however minimal data exist on the potential impact of metastases on the intrinsic material characteristics of the bone matrix. Thirty-four (34) female athymic rats were inoculated with HeLa (N = 17) or Ace-1 (N = 17) cancer cells lines producing osteolytic or mixed (osteolytic and osteoblastic) metastases, respectively. A maximum of 21 days was allowed between inoculation and rat sacrifice for vertebrae extraction. High performance liquid chromatography (HPLC) was utilized to determine modifications in collagen-I parameters such as proline hydroxylation and the formation of specific enzymatic and non-enzymatic (pentosidine) cross-links. Raman spectroscopy was used to determine relative changes in mineral crystallinity, mineral carbonation, mineral/collagen matrix ratio, collagen quality ratio, and proline hydroxylation. HPLC results showed significant increase in the formation of pentosidine and decrease in the formation of the enzymatic cross-link deoxy-pryridinoline within osteolytic bone compared to mixed bone. Raman results showed decreased crystallinity, increased carbonation, and collagen quality (aka 1660/1690 sub-band) ratio with osteolytic bone compared to mixed bone and healthy controls along with an observed increase in proline hydroxylation with metastatic involvement. The mineral/matrix ratio decreased in both osteolytic and mixed bone compared to healthy controls. Quantifying modifications within the intrinsic characteristics of bone tissue will provide a foundation to assess the impact of current therapies on the material behavior of bone tissue in the metastatic spine and highlight targets for the development of new therapeutics and approaches for treatment. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:2126-2136, 2016.

Clinoptilolite/PCL–PEG–PCL composite scaffolds for bone tissue engineering applications

The aim of this study was to prepare and characterize highly porous clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) composite scaffolds. Scaffolds with different clinoptilolite contents (10% and 20%) were fabricated with reproducible solvent-free powder compression/particulate leaching technique. The scaffolds had interconnective porosity in the range of 55–76%. Clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) scaffolds showed negligible degradation within eight weeks and displayed less water uptake and higher bioactivity than poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) scaffolds. The presence of clinoptilolite improved the mechanical properties. Highest compressive strength (5.6 MPa) and modulus (114.84 MPa) were reached with scaffold group containing 20% clinoptilolite. In vitro protein adsorption capacity of the scaffolds was also higher for clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) scaffolds. These scaffolds had 0.95 mg protein/g scaffold adsorption capacity and also higher osteoinductivity in terms of enhanced ALP, OSP activities and intracellular calcium deposition. Stoichiometric apatite deposition (Ca/P=1.686) was observed during cellular proliferation analysis with human fetal osteoblasts cells. Thus, it can be suggested that clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) composite scaffolds could be promising carriers for enhancement of bone regeneration in bone tissue engineering applications.

Surface Assembly Configurations and Packing Preferences of Fibrinogen Mediated by the Periodicity and Alignment Control of Block Copolymer Nanodomains

The ability to control the specific adsorption and packing behaviors of biomedically important proteins by effectively guiding their preferred surface adsorption configuration and packing orientation on polymeric surfaces may have utility in many applications such as biomaterials, medical implants, and tissue engineering. Herein, we investigate the distinct adhesion configurations of fibrinogen (Fg) proteins and the different organization behaviors between single Fg molecules that are mediated by the changes in the periodicity and alignment of chemically alternating nanodomains in thin films of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) block copolymer (BCP). Specifically, the adsorption characteristics of individual Fg molecules were unambiguously resolved on four different PS-b-PMMA templates of dsa PS-b-PMMA, sm PS-b-PMMA, com PS-b-PMMA, and PS-r-PMMA. By direct visualization through high resolution imaging, the distinct adsorption and packing configurations of both isolated and interacting Fg molecules were determined as a function of the BCP template-specific nanodomain periodicity, domain alignment (random versus fully aligned), and protein concentration. The three dominant Fg adsorption configurations, SP∥, SP⊥, and TP, were observed and their occurrence ratios were ascertained on each PS-b-PMMA template. During surface packing, the orientation of the protein backbone was largely governed by the periodicity and alignment of the underlying PS-b-PMMA nanodomains whose specific direction was explicitly resolved relative to the polymeric nanodomain axis. The use of PS-b-PMMA with a periodicity much smaller than (and comparable to) the length of Fg led to a Fg scaffold with the protein backbone aligned parallel (and perpendicular) to the nanodomain major axis. In addition, we have successfully created fully Fg-decorated BCP constructs analogous to two-dimensional Fg crystals in which aligned protein molecules are arranged either side-on or end-on, depending on the BCP template. Our results demonstrate that the geometry and orientation of the protein can be effectively guided during Fg self-assembly by controlling the physical dimensions and orientations of the underlying BCP templates. Finally, the biofunctionality of the BCP surface-bound Fg was assessed and the Fg/BCP construct was successfully used in the Ca-P nanoparticle nucleation/growth and microglia cell activation.

Excavating the Role of Aloe Vera Wrapped Mesoporous Hydroxyapatite Frame Ornamentation in Newly Architectured Polyurethane Scaffolds for Osteogenesis and Guided Bone Regeneration with Microbial Protection

Guided bone regeneration (GBR) scaffolds are unsuccessful in many clinical applications due to a high incidence of postoperative infection. The objective of this work is to fabricate GBR with an anti-infective electrospun scaffold by ornamenting segmented polyurethane (SPU) with two-dimensional Aloe vera wrapped mesoporous hydroxyapatite (Al-mHA) nanorods. The antimicrobial characteristic of the scaffold has been retrieved from the prepared Al-mHA frame with high aspect ratio (∼14.2) via biosynthesis route using Aloe vera (Aloe barbadensis miller) extract. The Al-mHA frame was introduced into an unprecedented SPU matrix (solution polymerized) based on combinatorial soft segments of poly(ε-caprolactone) (PCL), poly(ethylene carbonate) (PEC), and poly(dimethylsiloxane) (PDMS), by an in situ technique followed by electrospinning to fabricate scaffolds. For comparison, pristine mHA nanorods are also ornamented into it. An enzymatic ring-opening polymerization technique was adapted to synthesize soft segment of (PCL-PEC-b-PDMS). Structure elucidation of the synthesized polymers is established by nuclear magnetic resonance spectroscopy. Sparingly, Al-mHA ornamented scaffolds exhibit tremendous improvement (175%) in the mechanical properties with promising antimicrobial activity against various human pathogens. After confirmation of high osteoconductivity, improved biodegradation, and excellent biocompatibility against osteoblast-like MG63 cells (in vitro), the scaffolds were implanted in rabbits as an animal model by subcutaneous and intraosseous (tibial) sites. Improved in vivo biocompatibilities, biodegradation, osteoconductivity, and the ability to provide an adequate biomimetic environment for biomineralization for GBR of the scaffolds (SPU and ornamented SPUs) have been found from the various histological sections. Early cartilage formation, endochondral ossification, and rapid bone healing at 4 weeks were found in the defects filled with Al-mHA ornamented scaffold compared to pristine SPU scaffold. Organ toxicity studies further confirm the absence of appreciable tissue architecture abnormalities in the renal hepatic and cardiac tissue sections. The entire results of this study manifest the feasibility of fabricating a mechanically adequate tailored nanofibrous SPU scaffold based on combinatorial soft segments of PCL, PEC, and PDMS by a biomimetic approach and the advantages of an Aloe vera wrapped mHA frame in promoting osteoblast phenotype progression with microbial protection for potential GBR applications.

On-Demand Guided Bone Regeneration with Microbial Protection of Ornamented SPU Scaffold with Bismuth-Doped Single Crystalline Hydroxyapatite: Augmentation and Cartilage Formation

Guided bone regeneration (GBR) scaffolds are futile in many clinical applications due to infection problems. In this work, we fabricated GBR with an anti-infective scaffold by ornamenting 2D single crystalline bismuth-doped nanohydroxyapatite (Bi-nHA) rods onto segmented polyurethane (SPU). Bi-nHA with high aspect ratio was prepared without any templates. Subsequently, it was introduced into an unprecedented synthesized SPU matrix based on dual soft segments (PCL-b-PDMS) of poly(ε-caprolactone) (PCL) and poly(dimethylsiloxane) (PDMS), by an in situ technique followed by electrospinning to fabricate scaffolds. For comparison, undoped pristine nHA rods were also ornamented into it. The enzymatic ring-opening polymerization technique was adapted to synthesize soft segments of PCL-b-PDMS copolymers of SPU. Structure elucidation of the synthesized polymers is done by nuclear magnetic resonance spectroscopy. Sparingly, Bi-nHA ornamented scaffolds exhibit tremendous improvement (155%) in the mechanical properties with excellent antimicrobial activity against various human pathogens. After confirmation of high osteoconductivity, improved biodegradation, and excellent biocompatibility against osteoblast cells (in vitro), the scaffolds were implanted in rabbits by subcutaneous and intraosseous (tibial) sites. Various histological sections reveal the signatures of early cartilage formation, endochondral ossification, and rapid bone healing at 4 weeks of the critical defects filled with ornamented scaffold compared to SPU scaffold. This implies osteogenic potential and ability to provide an adequate biomimetic microenvironment for mineralization for GBR of the scaffolds. Organ toxicity studies further confirm that no tissue architecture abnormalities were observed in hepatic, cardiac, and renal tissue sections. This finding manifests the feasibility of fabricating a mechanically adequate nanofibrous SPU scaffold by a biomimetic strategy and the advantages of Bi-nHA ornamentation in promoting osteoblast phenotype progression with microbial protection (on-demand) for GBR applications.