Targeting and imaging cancer cells by Folate-decorated, quantum dots (QDs)- loaded nanoparticles of biodegradable polymers

Regulation of IFP in solid tumours through acoustic pressure to enhance infiltration of nanoparticles of various sizes

Numerous nanomedicines have been developed recently that can accumulate selectively in tumours due to the enhanced permeability and retention (EPR) effect. However, the high interstitial fluid pressure (IFP) in solid tumours limits the targeted delivery of nanomedicines. We were previously able to relieve intra-tumoural IFP by low-frequency non-focused ultrasound (LFNFU) through ultrasonic targeted microbubble destruction (UTMD), improving the targeted delivery of FITC-dextran. However, the accumulation of nanoparticles of different sizes and the optimal acoustic pressure were not evaluated. In this study, we synthesised Cy5.5-conjugated mesoporous silica nanoparticles (Cy5.5-MSNs) of different sizes using a one-pot method. The Cy5.5-MSNs exhibited excellent stability and biosafety regardless of size. MCF7 tumour-bearing mice were subjected to UTMD over a range of acoustic pressures (0.5, 0.8, 1.5 and 2.0 MPa), and injected intravenously with Cy5.5-MSNs. Blood perfusion, tumour IFP and intra-tumoural accumulation of Cy5.5-MSNs were analysed. Blood perfusion and IFP initially rose, and then declined, as acoustic pressure intensified. Furthermore, UTMD significantly enhanced the accumulation of differentially sized Cy5.5-MSNs in tumour tissues compared to that of the control group, and the increase was sevenfold higher at an acoustic pressure of 1.5 MPa. Taken together, UTMD enhanced the infiltration and accumulation of Cy5.5-MSNs of different sizes in solid tumours by reducing intra-tumour IFP.

PLGA nanomedical consignation: A novel approach for the management of prostate cancer

The malignancy of the prostate is a complicated ailment which impacts millions of male populations around the globe. Despite the multitude of endeavour accomplished within this domain, modalities that are involved in the ameliorative management of predisposed infirmity are still relent upon non-specific and invasive procedures, thus imposing a detrimental mark on the living standard of the individual. Also, the orchestrated therapeutic interventions are still incompetent in substantiating a robust and unabridged therapeutic end point owing to their inadequate solubility, low bioavailability, limited cell assimilation, and swift deterioration, thereby muffling the clinical application of these existing treatment modalities. Nanotechnology has been employed in an array of modalities for the medical management of malignancies. Among the assortment of available nano-scaffolds, nanocarriers composed of a bio-decomposable and hybrid polymeric material like PLGA hold an opportunity to advance as standard chemotherapeutic modalities. PLGA-based nanocarriers have the prospect to address the drawbacks associated with conventional cancer interventions, owing to their versatility, durability, nontoxic nature, and their ability to facilitate prolonged drug release. This review intends to describe the plethora of evidence-based studies performed to validate the applicability of PLGA nanosystem in the amelioration of prostate malignancies, in conjunction with PLGA focused nano-scaffold in the clinical management of prostate carcinoma. This review seeks to explore numerous evidence-based studies confirming the applicability of PLGA nanosystems in ameliorating prostate malignancies. It also delves into the role of PLGA-focused nano-scaffolds in the clinical management of prostate carcinoma, aiming to provide a comprehensive perspective on these advancements.

In vivo imaging of prostate tumor-targeted folic acid conjugated quantum dots

Cancer is a major threat to human health; thus, early detection is imperative for successful management. Rapid diagnosis can be achieved by imaging primary (subcutaneous) tumors using fluorophores conjugated with tumor markers. Here, the application of biocompatible, quantum efficient, monodisperse, and photostable polymer-coated quantum dots (PQDs) is demonstrated for targeted prostate tumor imaging in living SCID mice. Briefly, PQDs (blue) are conjugated to folic acid (FA-PQDs) using DCC-NHS chemistry. Initially, in vitro targeted imaging via FA-PQDs is evaluated in LNCaP cells. The confocal microscopic evaluation demonstrates the uptake of FA-PQDs. To understand the dispersion of PQDs in vivo, the biodistribution of PQDs is assessed at different time intervals (1- 180 min) using whole-body fluorescence imaging and computed tomography (CT) scan. PQDs are seen to accumulate in organs like the liver, kidneys, spleen, lungs, and urinary bladder within 60 min, however, PQDs are not observed at 180 min indicating renal clearance. Further, to target the prostate tumor (~ 200 mm3) in mice, FA-PQDs are injected intravenously, and whole-body fluorescence imaging along with a CT scan is recorded. FA-PQDs are seen at the tumor site as compared to PQDs. The results confirm that the FA-PQDs function as excellent nanoprobes for targeted tumor imaging in vivo.

Aptamer-functionalized quantum dots as theranostic nanotools against cancer and bacterial infections: A comprehensive overview of recent trends

Aptamers (Apts) are synthetic nucleic acid ligands that can be engineered to target various molecules, including amino acids, proteins, and pharmaceuticals. Through a series of adsorption, recovery, and amplification steps, Apts are extracted from combinatorial libraries of synthesized nucleic acids. Using aptasensors in bioanalysis and biomedicine can be improved by combining them with nanomaterials. Moreover, Apt-associated nanomaterials, including liposomes, polymeric, dendrimers, carbon nanomaterials, silica, nanorods, magnetic NPs, and quantum dots (QDs), have been widely used as promising nanotools in biomedicine. Following surface modifications and conjugation with appropriate functional groups, these nanomaterials can be successfully used in aptasensing. Advanced biological assays can use Apts immobilized on QD surfaces through physical interaction and chemical bonding. Accordingly, modern QD aptasensing platforms rely on interactions between QDs, Apts, and targets to detect them. QD-Apt conjugates can be used to directly detect prostate, ovarian, colorectal, and lung cancers or simultaneously detect biomarkers associated with these malignancies. Tenascin-C, mucin 1, prostate-specific antigen, prostate-specific membrane antigen, nucleolin, growth factors, and exosomes are among the cancer biomarkers that can be sensitively detected using such bioconjugates. Furthermore, Apt-conjugated QDs have shown great potential for controlling bacterial infections such as Bacillus thuringiensis, Pseudomonas aeruginosa, Escherichia coli, Acinetobacter baumannii, Campylobacter jejuni, Staphylococcus aureus, and Salmonella typhimurium. This comprehensive review discusses recent advancements in the design of QD-Apt bioconjugates and their applications in cancer and bacterial theranostics.

Revolutionizing Food Safety with Quantum Dot-Polymer Nanocomposites: From Monitoring to Sensing Applications

The present review article investigates the prospective utilisation of quantum dot-polymer nanocomposites in the context of ensuring food safety. The text pertains to the advancement of nanocomposites, encompassing their distinctive optical and electrical characteristics, and their prospective to transform the detection and perception of food safety risks. The article explores diverse methodologies for producing nanocomposites and underscores their potential utility in identifying impurities, microorganisms, and harmful substances in food. The article provides an overview of the challenges and limitations associated with the utilisation of nanocomposites in food safety applications, encompassing concerns regarding toxicity and the necessity for standardised protocols. The review article presents a comprehensive examination of the present research status in this area and underscores the potential of quantum dots-polymer nanocomposites in transforming food safety monitoring and sensing.

Development of tumor-specific liposomes containing quantum dots-photosensitizer conjugate used for radiotherapy

This study aims to develop a multifunctional liposomal radiosensitizer to destroy more tumor cells by using lower radiation doses compared to clinically used 6 MV X-ray doses. To achieve this aim, first Chlorine-e6 (Ce6) was covalently bound to functional groups of outer surfaces of quantum dots (QDs) through EDC/NHS reactions. Then, QDs-Ce6 conjugate loaded, nanosized, PEG-coated, and tumor-specific folic acid-modified immunoliposome dispersions were prepared by film method. Enhanced anti-proliferation activity of free and liposomal conjugate against 4T1 (murine breast cancer) cell lines was investigated at different X-ray doses (5, 10, 15, and 20 Gy). As a result, the best radiosensitizer effect was observed at a 5 Gy X-ray dose and it was found that following the X-ray irradiation, immunoliposome dispersions containing QDs-Ce6 conjugate killed 26.8 ± 1.7% more cancer cells than radiation alone.

Designing of a pH-activatable carbon dots as a luminescent nanoprobe for recognizing folate receptor-positive cancer cells

During recent years, cancer has been recognized as a well-known disorder all over the world. One of the important factors to tackle this problem better than past decades is early diagnosis that takes into practice by state-of-the-art visual equipment for detection cancer cells. Herein, in this research, we synthesized carbon dots with pH-dependent behavior from a green source by hydrothermal method with high quantum yield and blue fluorescence. Folic acid-conjugated carbon dots by an efficient and optimal conjugation method were set upped which determined cancer cells visually. These synthesized and conjugated nanoparticles entered into the cancer cells more comprehensive than normal cells by receptor-mediated endocytosis and could distinguish cancer cells from normal ones by fluorescence imaging. Ultimately, synthesized nanoparticles in this research can be considered as an efficient fluorescent nanoprobe for cancer pre-diagnosis.

Imaging cancer cells with nanostructures: Prospects of nanotechnology driven non-invasive cancer diagnosis

The application of nanostructured materials in medicine is a rapidly evolving area of research that includes both the diagnosis and treatment of various diseases. Metals, metal oxides and carbon-based nanomaterials have shown much promise in medical technological advancements due to their tunable physical, chemical and biological properties. The nanoscale properties, especially the size, shape, surface chemistry and stability makes them highly desirable for diagnosing and treating various diseases, including cancers. Major applications of nanomaterials in cancer diagnosis include in vivo bioimaging and molecular marker detection, mainly as image contrast agents using modalities such as radio, magnetic resonance, and ultrasound imaging. When a suitable targeting ligand is attached on the nanomaterial surface, it can help pinpoint the disease site during imaging. The application of nanostructured materials in cancer diagnosis can help in the early detection, treatment and patient follow-up . This review aims to gather and present the information regarding the application of nanotechnology in cancer diagnosis. We also discuss the challenges and prospects regarding the application of nanomaterials as cancer diagnostic tools.

A pH/ultrasonic dual-response step-targeting enterosoluble granule for combined sonodynamic-chemotherapy guided via gastrointestinal tract imaging in orthotopic colorectal cancer

Colorectal cancer is one of the malignant tumors with high morbidity and lethality. Its efficient diagnosis and treatment has important significance. In this study, the orthotopic cancer model mouse, which could perfectly simulate clinical inflammatory colorectal cancer, was constructed by chemical induction. Based on this model, a new pH/ultrasonic dual-response, step-targeting and precisely controlled-release enteric-coated granule was designed for the combined sonodynamic (SDT)-chemotherapy. The enteric-coated granule was fabricated by enwrapping carboxymethyl chitosan (CMC) on folic acid-modified phospholipid (SLB-FA) encapsulating mesoporous silicon-coated gold nanoparticles loaded with chlorin (Ce6) and doxorubicin hydrochloride (DOX), titled as Au@mSiO2/Ce6/DOX/SLB-FA@CMC (GMCDS-FA@CMC). The diameter of the Au@mSiO2/Ce6/DOX/SLB-FA (GMCDS-FA) nanoprobe was 61.21 nm and that of the GMCDS-FA@CMC enteric-coated granule was 1.1 μm. MTT results showed that the cell survival rate was still as high as 76.55 ± 1.27% when the concentration of GMCDS-FA was up to 200 μg mL-1, which can indicate the low cytotoxicity of the nanoprobe. According to CT imaging, the enteric-coated granule had the highest concentration in the colorectum of the orthotopic cancer mouse after 7-9 h with oral administration, and was nearly metabolized out of the body after 24 h. The in vitro and in vivo experiments showed that the targeting enteric-coated granule had the best effect of treatment and desired prognosis after combined SDT-chemotherapy.

Ethylcellulose nanoparticles prepared from nano-emulsion templates as new folate binding haemocompatible platforms

Ethylcellulose is a biocompatible polymer attracting increasing interest for biomedical applications. In the present work, the formation of folate-ethylcellulose nanoparticle complexes from nano-emulsion templates prepared by a low-energy approach, using aqueous components suitable for biomedical applications has been investigated. The composition of the aqueous component is shown to be crucial for the formation of stable nano-emulsions and influences the zeta potential values. The ethylcellulose nanoparticles with mean sizes around 100 nm were obtained from the nano-emulsions by solvent evaporation and showed positive zeta potential values above +20 mV due to the presence of the cationic surfactant. The nanoparticles were successfully complexed with folate, as evidenced by both particle size and zeta potential measurements. The complexes prepared with HEPES buffered glucose solution showed excellent haemocompatibility, which make them promising for parenteral therapeutic applications and also for those in which easy access to systemic circulation may occur, like in lungs.

Actively Targeted and Redox Responsive Delivery of Anticancer Drug by Chitosan Nanoparticles

The clinical efficacy of methotrexate (MTX) is limited by its poor water solubility, its low bioavailability, and the development of resistance in cancer cells. Herein, we developed novel folate redox-responsive chitosan (FTC) nanoparticles for intracellular MTX delivery. l-Cysteine and folic acid molecules were selected to be covalently linked to chitosan in order to confer it redox responsiveness and active targeting of folate receptors (FRs). NPs based on these novel polymers could possess tumor specificity and a controlled drug release due to the overexpression of FRs and high concentration of reductive agents in the microenvironment of cancer cells. Nanoparticles (NPs) were prepared using an ionotropic gelation technique and characterized in terms of size, morphology, and loading capacity. In vitro drug release profiles exhibited a glutathione (GSH) dependence. In the normal physiological environment, NPs maintained good stability, whereas, in a reducing environment similar to tumor cells, the encapsulated MTX was promptly released. The anticancer activity of MTX-loaded FTC-NPs was also studied by incubating HeLa cells with formulations for various time and concentration intervals. A significant reduction in viability was observed in a dose- and time-dependent manner. In particular, FTC-NPs showed a better inhibition effect on HeLa cancer cell proliferation compared to non-target chitosan-based NPs used as control. The selective cellular uptake of FTC-NPs via FRs was evaluated and confirmed by fluorescence microscopy. Overall, the designed NPs provide an attractive strategy and potential platform for efficient intracellular anticancer drug delivery.

Next-generation nanotheranostics targeting cancer stem cells

Cancer is depicted as the most aggressive malignancy and is one the major causes of death worldwide. It originates from immortal tumor-initiating cells called 'cancer stem cells' (CSCs). This devastating subpopulation exhibit potent self-renewal, proliferation and differentiation characteristics. Dynamic DNA repair mechanisms can sustain the immortality phenotype of cancer to evade all treatment strategies. To date, current conventional chemo- and radio-therapeutic strategies adopted against cancer fail in tackling CSCs. However, new advances in nanotechnology have paved the way for creating next-generation nanotheranostics as multifunctional smart 'all-in-one' nanoparticles. These particles integrate diagnostic, therapeutic and targeting agents into one single biocompatible and biodegradable carrier, opening up new avenues for breakthroughs in early detection, diagnosis and treatment of cancer through efficient targeting of CSCs.

Molecular mechanism of CAT and SOD activity change under MPA-CdTe quantum dots induced oxidative stress in the mouse primary hepatocytes

Quantum dots (QDs) are a unique class of nano-materials that have attractive potentials in biological and biomedical applications, and the concern on their biosafety is concomitantly increasing. The overproduction of reactive oxygen species (ROS) is considered to be one of the reasons that induce the in vitro QDs induced toxic response. However, the exact molecular pathways underlying these effects remain poorly clarified and few studies combine the molecular results with the cellular results to explore the cytotoxic effect of QDs. The aim of the present study was to evaluate the effect of mercaptopropionic acid (MPA) capped CdTe QDs on the structures and functions of two antioxidant enzymes, catalase (CAT) superoxide dismutase (SOD), and then associated with the cytotoxic effects of oxidative stress induced by MPA-CdTe QDs on mouse hepatocytes to define the toxic underlying mechanism. The molecular experiment results showed that the exposure of QDs significantly changed the conformation of CAT and SOD, and leading to the promotion of molecular CAT activity and the inhibition of molecular SOD activity. Meanwhile, the cellular experiment results demonstrated that exposure to QDs changed the activities of CAT and SOD in mouse primary hepatocytes, led to the break of redox balance and resulted in the oxidative stress and cell apoptosis. This study explores the effects of MPA- CdTe QDs to the CAT and SOD molecules and then demonstrates the subsequent QDs toxic effects at a cellular level, revealing their potential risk in biomedical applications.

Luminescent Molecularly Imprinted Polymers Based on Covalent Organic Frameworks and Quantum Dots with Strong Optical Response to Quinoxaline-2-Carboxylicacid

Three-dimensional molecularly imprinted polymers (MIPs) based on quantum dots-grafted covalent organic frameworks (QDs-grafted COFs) are reported in this study. The compound 1,3,5-triformylphloroglucinol-P-phenylenediamine was used as COF material to react with the amino-modified CdSe/ZnS QDs by Schiff-base reactions. The amino-derived QDs reacted with quinoxaline-2-carboxylicacid (QCA) via a non-covalent interaction. The system combines the advantages of MIPs, COFs, and QDs for highly sensitive and selective QCA detection. The MIPs based on QDs-grafted COFs showed good chemical selectivity and thermal stability, as well as consistency in QCA optosensing. Under optimal conditions, the detection limit for QCA in meat and feed samples was 0.85 μmol L⁻¹, over a linear concentration range of 1–50 μmol L⁻¹. The current findings suggest a potential application of MIPs based on QDs-grafted COFs for the detection of trace levels of hazardous chemicals for food safety and environmental control.

Inhibitory effects of CuInS2 and CdTe nanoparticles on macrophage cytokine production and phagocytosis in vitro

Macrophages eliminate and destroy invading bacteria and contaminants by engulfing them or secreting cytokines that trigger downstream immune responses. Consequently, impairment of the phagocytic functions of macrophages and/or suppressing their cytokine secretion are dangerous to organisms that rely on immune protection. Accordingly, exposure to environmental nanoparticles (NPs) that display immunomodulatory properties are serious. In this work, two types of NPs, i.e., mild-toxicity CuInS₂ NPs and high-toxicity CdTe NPs, were used to evaluate the effects of NP exposure for macrophages. Following incubation for 24 h, THP-1-derived macrophage viability was assessed using an MTT method after exposing the THP-1 cells to different concentrations of CuInS₂ or CdTe NPs. Phagocytosis assays demonstrated that both CuInS₂ and CdTe NPs impair phagocytic activity toward Staphylococcus aureus (S. aureus). After pretreatment with CuInS₂ and CdTe NPs at 4 μmol/L, THP-1 macrophages exhibited decreases in phagocytic ratio from ca. 32.9% to ca. 18.5% and 18.7%, respectively. Since the zeta potentials of intact and weathered CuInS₂ NPs were distributed over a wide range from positive to negative, large quantities of intact and weathered CuInS₂ NPs bore sufficient positive charge on their surfaces to induce membrane depolarization, thus theoretically providing electrostatic forces between S. aureus and THP-1, which could induce downstream intracellular events that increase phagocytosis. However, real time polymerase chain reaction arrays revealed that transcription of the pro-inflammatory factors IL-1β, IL-6, and TNF-α decreased while that of the anti-inflammatory factor IL-10 increased after treatment with CuInS₂ NPs. Furthermore, transcription of TNF-α decreased while IL-10 increased after treatment with CdTe NPs. Thus, both kinds of NPs inhibited phagocytosis of S. aureus by THP-1 to some extent, confirming that immunosuppression can occur when macrophages are exposed to environmental NPs.

Morphological Modification of Carbon Nanoparticles after Interacting with Methotrexate as a Potential Anticancer Agent

PURPOSE

Production of highly penetrable and targetable drug delivery particles is mainly focused by current therapy and such focus is achieved in our present study. The carbon nanoparticle (CNP) prepared from purely natural source was modified from spherical shape to cylindrical floral like structure after treatment with the anticancer drug methotrexate (CM).

METHODS

The physiochemical properties of the CNP and CM was characterized using FT-IR/Raman Spectrometer, XRD, SEM, AFM, particle size analyzer and its biological evaluation using haemolysis and MTT assay.

RESULTS

The shift in FT-IR peaks at 1592, 1120 cm^-1 and peaks of raman spectra observed at 1303, 1300 cm^-1 represents ordered carbon nanotubes. The morphological change from spherical to cylindrical floral like structure was observed using SEM and AFM and its particle size distribution analysis shows an average diameter of 269 nm for CM. XRD peak at 2θ = 23.86° (002) indicates the presence of large amount of amorphous material that corresponds to multi-walled carbon nanotubes. Haemocompatibility studies proved the safety level usage as 100 μg/ml and MTT assay shows viability rate of 85-98% with mouse embryonic fibroblast (NIH/3 T3) and 30-45% with pancreatic carcinoma (MIA PaCa-2) and gastric cancer cell lines (SNU- 484) respectively.These results are also supported by phase contrast microscope images observed after staining with calcein AM and EthD-1.

CONCLUSIONS

The morphologically modified CNPs has shown good anticancer, biocompatibility and haemocompatibility property which is an important criterion to be satisfied by a biomedical product.

How can nanotechnology help the fight against breast cancer?

In this review we provide a broad overview on the use of nanotechnology for the fight against breast cancer (BC). Nowadays, detection, diagnosis, treatment, and prevention may be possible thanks to the application of nanotechnology to clinical practice. Taking into consideration the different forms of BC and the disease status, nanomaterials can be designed to meet the most forefront objectives of modern therapy and diagnosis. We have analyzed in detail three main groups of nanomaterial applications for BC treatment and diagnosis. We have identified several types of drugs successfully conjugated with nanomaterials. We have analyzed the main important imaging techniques and all nanomaterials used to help the non-invasive, early detection of the lesions. Moreover, we have examined theranostic nanomaterials as unique tools, combining imaging, detection, and therapy for BC. This state of the art review provides a useful guide depicting how nanotechnology can be used to overcome the current barriers in BC clinical practice, and how it will shape the future scenario of treatments, prevention, and diagnosis, revolutionizing the current approaches, e.g., reducing the suffering related to chemotherapy.

Enhancement of the Fluorescence Quantum Yield of Thiol-Stabilized CdTe Quantum Dots Through Surface Passivation with Sodium Chloride and Bicarbonate

Colloidal quantum dots (QDs) have potential for several applications, e.g. as novel light sources; as photoluminescent probes; and for solar energy conversion devices, but their sensitivity towards their environmental surroundings, and the presence of surface defects may still degrade their emission properties. Herein, we present a post-synthetic treatment of CdTe QDs stabilized by mixed thiol ligands using chloride and bicarbonate ions to achieve near-complete surface passivation, resulting in a two-fold increase of the photoluminescence quantum yield (PL QY) and significant suppression of non-radiative recombination. Time-resolved PL measurements reveal fluorescence lifetime and PL QY trends did not both track identically; in the most favorable cases a suppression of non-radiative recombination and a slight increase in the radiative recombination rates after the salt treatment took place. The optimized conditions demonstrated here are proven to work for different sizes of CdTe QDs, and also show a dependence on the composition of the mixed ligand systems used.

Recent trends of nanomedicinal approaches in clinics

Nanotechnology has become the indispensable cutting edge science providing solutions to many problems associated with human being. The application of nanotechnology associated to human health "nanomedicine" has revolutionized the drug delivery system by providing improved pharmacological and therapeutic properties of drugs. These advantageous effects of drug loaded nanocarrier systems are embraced by the pharmaceutical industries for the development of different effective nanocarriers. Currently, several drug loaded nanoformulations are approved by the Food and Drug Administration (FDA), and some of them are undergoing clinical trials for the human use. In this review, we have discussed the progress achieved so far for various drug loaded nanoformulations along with few emerging nanoformulations that are about to enter into clinical trials.

MRI-guided targeting delivery of doxorubicin with reduction-responsive lipid-polymer hybrid nanoparticles

In recent years, there has been increasing interest in developing a multifunctional nanoscale platform for cancer monitoring and chemotherapy. However, there is still a big challenge for current clinic contrast agents to improve their poor tumor selectivity and response. Herein, we report a new kind of Gd complex and folate-coated redox-sensitive lipid-polymer hybrid nanoparticle (Gd-FLPNP) for tumor-targeted magnetic resonance imaging and therapy. Gd-FLPNPs can simultaneously accomplish diagnostic imaging, and specific targeting and controlled release of doxorubicin (DOX). They exhibit good monodispersity, excellent size stability, and a well-defined core-shell structure. Paramagnetic nanoparticles based on gadolinium-diethylenetriaminepentaacetic acid-bis-cetylamine have paramagnetic properties with an approximately two-fold enhancement in the longitudinal relaxivity compared to clinical used Magnevist. For targeted and reduction-sensitive drug delivery, Gd-FLPNPs released DOX faster and enhanced cell uptake in vitro, and exhibited better antitumor effect both in vitro and in vivo.

Folic acid-conjugated cationic Ag2S quantum dots for optical imaging and selective doxorubicin delivery to HeLa cells

AIM

We aim to develop folic acid (FA)-conjugated cationic Ag₂S near-infrared quantum dots (NIRQDs) for the delivery of doxorubicin (DOX) selectively to folate receptor (FR)-positive cancer cells to achieve enhanced drug efficacy and optical tracking in the NIR region.

MATERIALS & METHODS

Cationic Ag₂S NIRQDs were decorated with FA using a PEG bridge and loaded with DOX. In vitro studies were performed on FR-positive human cervical carcinoma cells and FR-negative A549 cells.

RESULTS

Significantly higher uptake of DOX by human cervical carcinoma cells cells and a greater therapeutic effect along with a strong intracellular optical signal were obtained with DOX-loaded FA-conjugated Ag₂S NIRQDs.

CONCLUSION

These Ag₂S NIRQDs are promising theranostic nanoparticles for receptor-mediated delivery of DOX with enhanced drug efficacy combined with optical imaging.

Doxorubicin-conjugated D-glucosamine- and folate- bi-functionalised InP/ZnS quantum dots for cancer cells imaging and therapy

Nanoscaled quantum dots (QDs), with unique optical properties have been used for the development of theranostics. Here, InP/ZnS QDs were synthesised and functionalised with folate (QD-FA), D-glucosamine (QD-GA) or both (QD-FA-GA). The bi-functionalised QDs were further conjugated with doxorubicin (QD-FA-GA-DOX). Optimum Indium to fatty acid (In:MA) ratio was 1:3.5. Transmission electron microscopy (TEM) micrographs revealed spherical morphology for the QDs (11 nm). Energy-dispersive spectroscopy (EDS) spectrum confirmed the chemical composition of the QDs. MTT analysis in the OVCAR-3 cells treated with bare QDs, QD-FA, QD-GA, QD-FA-GA and QD-FA-GA-DOX (0.2 mg/mL of QDs) after 24 h indicated low toxicity for the bare QDs and functionalised QDs (about 80-90% cell viability). QD-FA-GA-DOX nanoparticles elicited toxicity in the cells. Cellular uptake of the engineered QDs were investigated in both folate receptor (FR)-positive OVCAR-3 cells and FR-negative A549 cells using fluorescence microscopy and FACS flow cytometry. The FA-functionalised QDs showed significantly higher uptake in the FR-positive OVCAR-3 cells, nonetheless the GA-functionalised QDs resulted in an indiscriminate uptake in both cell lines. In conclusion, our findings indicated that DOX-conjugated FA-armed QDs can be used as theranostics for simultaneous imaging and therapy of cancer.

Development of a novel folate-modified nanobubbles with improved targeting ability to tumor cells

Conjugation of folate (FOL) to nanobubbles could enhance the selective targeting to tumors expressing high levels of folate receptor (FR). To further improve the selective targeting ability of FOL-modified nanobubbles, a novel FOL-targeted nanobubble ((FOL)₂-NB) with increasing FOL content (accomplished by linking two FOL molecules per DSPE-PEG2000 chain) was synthesized, through the methods of mechanical shaking and low-speed centrifugation based on lipid-stabilized perfluoropropane. The bubble size and distribution range were measured by dynamic light scattering (DLS). Enhanced imaging ability was evaluated using a custom-made agarose mold with a clinical US imaging system at mechanical indices of up to 0.12 at a center frequency of 9.0MHz. Targeted ability was also carried out in human breast cancer MCF-7 cells, which over-express the FR, by fluorescence activated cell sorting (FACS) and fluorescence microscopy, respectively. (FOL)₂-NB with a particle size of 286.87±22.96nm were successfully prepared, and they exhibited superior contrast imaging effect. FACS and fluorescence microscopy studies showed greater cellular targeting ability in the group of (FOL)₂-NB than in their control group of Non-targeted-NB (no FOL targeted nanobubbles) and FOL-NB (one FOL molecule per DSPE-PEG2000 chain). These results suggest that a new type of stronger targeted nanobubble was successfully prepared by increasing the FOL content per DSPE-PEG2000 chain. This novel (FOL)₂-NBs are potentially useful for ultrasound molecular imaging and treatment of FR-positive tumors and are worthy for further investigation.

Bioreducible, hydrolytically degradable and targeting polymers for gene delivery

Recently, synthetic gene carriers have been intensively developed owing to their promising application in gene therapy and considered as a suitable alternative to viral vectors because of several benefits. But cationic polymers still face some problems like low transfection efficiency, cytotoxicity, and poor cell recognition and internalization. The emerging engineered and smart polymers can respond to some changes in the biological environment like pH change, ionic strength change and redox potential, which is beneficial for cellular uptake. Redox-sensitive disulfide based and hydrolytically degradable cationic polymers serve as gene carriers with excellent transfection efficiency and good biocompatibility owing to degradation in the cytoplasm. Additionally, biodegradable polymeric micelles with cell-targeting function are recently emerging gene carriers, especially for the transfection of endothelial cells. In this review, some strategies for gene carriers based on these bioreducible and hydrolytically degradable polymers will be illustrated.

Folate-modified, indocyanine green-loaded lipid-polymer hybrid nanoparticles for targeted delivery of cisplatin

Cisplatin is a potent antitumor drug, which is widely applied in clinical cancer treatment. However, cisplatin can hardly distinguish between healthy tissue and tumor tissue, resulting in serious toxic side effects. Indocyanine green (ICG) is a FDA-approved near-infrared (NIR) fluorescence dye which has been used in photothermal therapy and optically mediated diagnostic, but the application of ICG is limited by its concentration-dependent aggregation, poor aqueous stability in vitro, lack of target specificity and rapid elimination from the body. Herein, to overcome these limitations of cisplatin and ICG, we fabricated folate-modified, cisplatin, ICG-loaded lipid-polymer hybrid nanoparticles (FCINPs) using a single-step sonication method. The FCINPs exhibited well-defined monodispersity, significant stability and excellent NIR penetration ability. The intracellular uptake experiment showed that the targeting efficacy of the FCINPs was more effective in folate receptors (FRs) over-expressing MCF-7 cells than FRs negative A549 cells. In addition, compared with chemo or photothermal treatment alone, the treatment of FCINPs in combination with 808 nm NIR laser irradiation can significantly induce the apoptosis and necrosis of MCF-7 cells. These findings indicated that the FCINPs would be a promising nanosized drug formulation for tumor-targeted therapy in the future.

Self-assemble nanoparticles based on polypeptides containing C-terminal luminescent Pt-cysteine complex

The growing attention to the luminescent nanocarriers is strongly stimulated by their potential application as drug delivery systems and by the necessity to monitor their distribution in cells and tissues. In this communication we report on the synthesis of amphiphilic polypeptides bearing C-terminal phosphorescent label together with preparation of nanoparticles using the polypeptides obtained. The approach suggested is based on a unique and highly technological process where the new phosphorescent Pt-cysteine complex serves as initiator of the ring-opening polymerization of α-amino acid N-carboxyanhydrides to obtain the polypeptides bearing intact the platinum chromophore covalently bound to the polymer chain. It was established that the luminescent label retains unchanged its emission characteristics not only in the polypeptides but also in more complicated nanoaggregates such as the polymer derived amphiphilic block-copolymers and self-assembled nanoparticles. The phosphorescent nanoparticles display no cytotoxicity and hemolytic activity in the tested range of concentrations and easily internalize into living cells that makes possible in vivo cell visualization, including prospective application in time resolved imaging and drug delivery monitoring.

A Novel Cancer Nanotheranostics System Based on Quantum Dots Encapsulated by a Polymer-Prodrug with Controlled Release Behaviour

A nanotheranostic system is a new system that combines both diagnosis and treatment of a malignant disease, e.g. cancer, by exploitation of the unusual properties of nano-sized particles. In this project, we have developed a novel nanotheranostic system based on quantum dots (QDs) coated with drug-loaded polymer. We first synthesized a double-group functionalized amphiphilic triblock copolymer and loaded it with the anti-tumour drug paclitaxel (PTX) and lipoic acid (LA) to obtain the prodrug mPEG-block-PCL-(graft-PTX)-block-PLA-(graft-LA) (mPEG: methoxy polyethylene glycol, PLA: poly(norbornene-lactide)s). When exposed to UV light (365 nm), the disulfide bond of LA was broken into two sulfydryls, which could in turn adhere to the surface of CdSe/ZnS QDs to form a nanotheranostic system. This novel system exhibited good controlled drug release behaviour due to the ester linkage between the drug and polymer. By using typical cancer cell lines, we showed that this nanotheranostic system is promising in cancer diagnosis and treatment in vitro.

Photothermally induced accumulation and retention of polymeric nanoparticles in tumors for long-term fluorescence imaging

Photothermal induced accumulation and retention of polymeric nanoparticles in tumor is used for long-term fluorescent imaging.

Polylactic acid (PLA) controlled delivery carriers for biomedical applications

Polylactic acid (PLA) and its copolymers have a long history of safety in humans and an extensive range of applications. PLA is biocompatible, biodegradable by hydrolysis and enzymatic activity, has a large range of mechanical and physical properties that can be engineered appropriately to suit multiple applications, and has low immunogenicity. Formulations containing PLA have also been Food and Drug Administration (FDA)-approved for multiple applications making PLA suitable for expedited clinical translatability. These biomaterials can be fashioned into sutures, scaffolds, cell carriers, drug delivery systems, and a myriad of fabrications. PLA has been the focus of a multitude of preclinical and clinical testing. Three-dimensional printing has expanded the possibilities of biomedical engineering and has enabled the fabrication of a myriad of platforms for an extensive variety of applications. PLA has been widely used as temporary extracellular matrices in tissue engineering. At the other end of the spectrum, PLA's application as drug-loaded nanoparticle drug carriers, such as liposomes, polymeric nanoparticles, dendrimers, and micelles, can encapsulate otherwise toxic hydrophobic anti-tumor drugs and evade systemic toxicities. The clinical translation of these technologies from preclinical experimental settings is an ever-evolving field with incremental advancements. In this review, some of the biomedical applications of PLA and its copolymers are highlighted and briefly summarized.

In one harness: the interplay of cellular responses and subsequent cell fate after quantum dot uptake

Rapid growth and expansion of engineered nanomaterials will occur when the technology can be used safely. Quantum dots have excellent prospects in clinical applications, but the issue of toxicity has not yet been resolved. To enable their medical implementation, the effect on, and mechanisms in, live cells should be clearly known and predicted. A massive amount of experimental data dedicated to nanotoxicity has been accumulated to-date, but it lacks a logical structure. The current challenge is to organize existing knowledge into lucid biological and mathematical models. In our review we aim to describe the interplay of various cell death mechanisms triggered by quantum dots as a consequence of particle parameters and experimental conditions.

Microfluidic synthesis of multifunctional liposomes for tumour targeting

Nanotechnology has started a new era in engineering multifunctional nanoparticles for diagnosis and therapeutics by incorporating therapeutic drugs, targeting ligands, stimuli-responsive release and imaging molecules. However, more functionality requires more complex synthesis processes, resulting in poor reproducibility, low yield and high production cost, hence difficulties in clinical translation. Herein we report a one-step microfluidic method for making multifunctional liposomes. Three formulations were prepared using this simple method, including plain liposomes, PEGylated liposomes and folic acid functionalised liposomes, all with a fluorescence dye encapsulated for imaging. The size and surface properties of these liposomes can be precisely controlled by simply tuning the flow rate ratio and the ratio of the lipids to PEGylated lipid (DSPE-PEG₂₀₀₀) and to the DSPE-PEG₂₀₀₀-Folate, respectively. The synthesised liposomes remained stable under mimic serum conditions. Compared to the plain liposomes and PEGylated liposomes, the targeted folic acid functionalised liposomes exhibited enhanced cellular uptake by the FA receptor positive SKOV3 cells, but not the negative MCF7 cells, and this enhanced uptake could be inhibited by adding excess free folic acid, indicating high specificity of FA ligand-receptor endocytosis. Further evaluation using the 3D tumour spheroid model also showed higher internalisation of the targeted liposome formulation in comparison with the PEGylated one. To the best of our knowledge, this work demonstrates for the first time the versatility of this microfluidic method for making different liposome formulations in a single step, their superior physicochemical properties as well as the enhanced cellular uptake and tumour spheroid uptake of the targeted liposomes.

Explore the research front of a specific research theme based on a novel technique of enhanced co-word analysis

Discovering the research front of a specific topic remains a significant challenge for researchers in all scientific areas. Over the last decade, burst term detection (BTD) in text streams has become a useful technique for bibliometrics and science mapping. It has been argued that analytical methods based on BTD can indicate certain facets of a research front. To integrate BTD into the framework of traditional co-word analysis, association rule mining between keywords and burst terms (ARM-KB) is introduced to enhance traditional co-word analysis and present a new facet of the research front for a field of science. Based on ARM-KB, possible connections between keywords and burst terms are built, which can facilitate the exploration of a research front from a three-dimensional perspective, through co-word analysis, burst term clues, and association rules. In the case study, the research fronts of anticancer based on nanomedicine (ABN) are explored. Based on theoretical and empirical analyses, ARM-KB can be used as a valuable new technique or a supplement to traditional bibliometrics in the exploration of scientific frontiers.

Optical imaging probes in oncology

Cancer is a complex disease, characterized by alteration of different physiological molecular processes and cellular features. Keeping this in mind, the possibility of early identification and detection of specific tumor biomarkers by non-invasive approaches could improve early diagnosis and patient management.Different molecular imaging procedures provide powerful tools for detection and non-invasive characterization of oncological lesions. Clinical studies are mainly based on the use of computed tomography, nuclear-based imaging techniques and magnetic resonance imaging. Preclinical imaging in small animal models entails the use of dedicated instruments, and beyond the already cited imaging techniques, it includes also optical imaging studies. Optical imaging strategies are based on the use of luminescent or fluorescent reporter genes or injectable fluorescent or luminescent probes that provide the possibility to study tumor features even by means of fluorescence and luminescence imaging. Currently, most of these probes are used only in animal models, but the possibility of applying some of them also in the clinics is under evaluation.The importance of tumor imaging, the ease of use of optical imaging instruments, the commercial availability of a wide range of probes as well as the continuous description of newly developed probes, demonstrate the significance of these applications. The aim of this review is providing a complete description of the possible optical imaging procedures available for the non-invasive assessment of tumor features in oncological murine models. In particular, the characteristics of both commercially available and newly developed probes will be outlined and discussed.

In vivo tumor targeting and anti-tumor effects of 5-fluororacil loaded, folic acid targeted quantum dot system

In this study, we modulated the anti-cancer efficacy of 5-Fluorouracil (5-FU) using a carrier system with enhanced targeting efficacy towards folate receptors (FRs) expressing malignant tissues. The 5-FU drug was loaded onto Mn-ZnS quantum dots (QDs) encapsulated with chitosan (CS) biopolymer and conjugated with folic acid (FA) based on a simple wet chemical method. The formation of 5-FU drug loaded composite was confirmed using Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Furthermore, the in vivo biodistribution and tumor targeting specificity of the 5-FU@FACS-Mn:ZnS in the tumor-bearing mice was conducted based on the Zn(2+) tissue bioaccumulation using inductively coupled plasma (ICP) spectroscopy. In addition to the characterization, the in vitro release profile of 5-FU from the conjugates investigated under diffusion controlled method demonstrated a controlled release behaviour as compared against the release behaviour of free 5-FU drug. The as-synthesized 5-FU@FACS-Mn:ZnS nanoparticle (NP) systemically induced higher level of apoptosis in breast cancer cells in vitro as compared to cells treated with free 5-FU drug following both cell cycle and annexin assays, respectively. Also, the in vivo toxicity assessment of the 5-FU@FACS-Mn:ZnS NPs as compared to the control did not cause any significant increase in the activities of the liver and kidney function biomarkers, malondialdehyde (MDA) and nitric oxide (NO) levels. However, based on the FA-FRs chemistry, the 5-FU@FACS-Mn:ZnS NPs specifically accumulated in the tumor of the tumor-bearing mice and thus contributed to the smaller tumor size and less event of metastasis was observed in the lungs when compared to the tumor-bearing mice groups treated with the free 5-FU drug. In summary, the results demonstrated that the 5-FU@FACS-Mn:ZnS QDs exhibits selective anti-tumor effect in MDA-MB231 breast cancer cells in vitro and 4TI breast cancer cells in vivo, providing a blueprint for improving the 5-FU efficacy and tumor targeting specificity with limited systemic toxicity.

Toxicological impact of cadmium-based quantum dots towards aquatic biota: Effect of natural sunlight exposure

Cadmium-based quantum dots (QDs) are increasingly applied in existent and emerging technologies, especially in biological applications due to their exceptional photophysical and functionalization properties. However, they are very toxic compounds due to the high reactive and toxic cadmium core. The present study aimed to determine the toxicity of three different QDs (CdS 380, CdS 480 and CdSeS/ZnS) before and after the exposure of suspensions to sunlight, in order to assess the effect of environmentally relevant irradiation levels in their toxicity, which will act after their release to the environment. Therefore, a battery of ecotoxicological tests was performed with organisms that cover different functional and trophic levels, such as Vibrio fischeri, Raphidocelis subcapitata, Chlorella vulgaris and Daphnia magna. The results showed that core-shell type QDs showed lower toxic effects to V. fischeri in comparison to core type QDs before sunlight exposure. However, after sunlight exposure, there was a decrease of CdS 380 and CdS 480 QD toxicity to bacterium. Also, after sunlight exposure, an effective decrease of CdSeS/ZnS and CdS 480 toxicity for D. magna and R. subcapitata, and an evident increase in CdS 380 QD toxicity, at least for D. magna, were observed. The results of this study suggest that sunlight exposure has an effect in the aggregation and precipitation reactions of larger QDs, causing the degradation of functional groups and formation of larger bulks which may be less prone to photo-oxidation due to their diminished surface area. The same aggregation behaviour after sunlight exposure was observed for bare QDs. These results further emphasize that the shell of QDs seems to make them less harmful to aquatic biota, both under standard environmental conditions and after the exposure to a relevant abiotic factor like sunlight.

Inorganic/polymer hybrid nanoparticles for sensing applications

This paper reviews a wide set of sensing applications based on the special properties associated with inorganic/polymer composite nanoparticles. We first describe optical sensing applications performed with hybrid nanoparticles and hybrid microgels with special emphasis on photoluminescence detection and imaging. Analyte detection with molecularly imprinted polymers and HPLC-based sensing using hybrid nanoparticles as stationary phase is also summarized. The final part is devoted to the study of ultra-sensitive molecule detection by surface-enhanced Raman spectroscopy using core-shell hybrid materials composed of noble metal nanoparticles and cross-linked polymers.

Meta-analysis of cellular toxicity for cadmium-containing quantum dots

Understanding the relationships between the physicochemical properties of engineered nanomaterials and their toxicity is critical for environmental and health risk analysis. However, this task is confounded by material diversity, heterogeneity of published data and limited sampling within individual studies. Here, we present an approach for analysing and extracting pertinent knowledge from published studies focusing on the cellular toxicity of cadmium-containing semiconductor quantum dots. From 307 publications, we obtain 1,741 cell viability-related data samples, each with 24 qualitative and quantitative attributes describing the material properties and experimental conditions. Using random forest regression models to analyse the data, we show that toxicity is closely correlated with quantum dot surface properties (including shell, ligand and surface modifications), diameter, assay type and exposure time. Our approach of integrating quantitative and categorical data provides a roadmap for interrogating the wide-ranging toxicity data in the literature and suggests that meta-analysis can help develop methods for predicting the toxicity of engineered nanomaterials.