The photoluminescence, drug delivery and imaging properties of multifunctional Eu3+/Gd3+ dual-doped hydroxyapatite nanorods

Trimetallic nanocomposites developed for efficient in vivo bimodal imaging via fluorescence and magnetic resonance

Despite several attempts, in vivo bimodal imaging still represents a challenge. Generally, it is accepted that dual-modality in imaging can improve sensitivity and spatial resolution, namely, when exploiting fluorescence (FI) and magnetic resonance imaging (MRI), respectively. Here, a newly developed combination of (i) protein-protected luminescent Au-Ag nanoclusters (LGSN) manifesting themselves by fluorescent emission at 705 nm and (ii) superparamagnetic iron oxide nanoparticles (SPION) embedded within the same protein and creating contrast in MR images, has been investigated in phantoms and applied for in vivo bimodal imaging of a mouse as a proof of principle. Unique LGSN-SPION nanocomposites were synthesized in a specific sequential one-pot green preparation procedure and characterized thoroughly using many physicochemical experimental techniques. The influence of LGSN-SPION samples on the viability of healthy cells (RPE-1) was tested using a calcein assay. Despite the presence of Ag (0.12 mg mL-1), high content of Au (above 0.75 mg mL-1), and moderate concentrations of Fe (0.24 mg mL-1), LGSN-SPION samples (containing approx. 15 mg mL-1 of albumin) were revealed as biocompatible (cell viability above 80%). Simultaneously, these concentration values of all components in the LGSN-SPION nanocomposite were used for achieving both MRI and fluorescence signals in phantoms as well as in a living mouse with sufficiently high resolution. Thus, the LGSN-SPION samples can serve as new efficient bimodal FI and MRI probes for in vivo imaging.

Nature-inspired protein mineralization strategies for nanoparticle construction: advancing effective cancer therapy

Recently, nanotechnology has shown great potential in the field of cancer therapy due to its ability to improve the stability and solubility and reduce side effects of drugs. The biomimetic mineralization strategy based on natural proteins and metal ions provides an innovative approach for the synthesis of nanoparticles. This strategy utilizes the unique properties of natural proteins and the mineralization ability of metal ions to combine nanoparticles through biomimetic mineralization processes, achieving the effective treatment of tumors. The precise control of the mineralization process between proteins and metal ions makes it possible to obtain nanoparticles with the ideal size, shape, and surface characteristics, thereby enhancing their stability and targeting ability in vivo. Herein, initially, we analyze the role of protein molecules in biomineralization and comprehensively review the functions, properties, and applications of various common proteins and metal particles. Subsequently, we systematically review and summarize the application directions of nanoparticles synthesized based on protein biomineralization in tumor treatment. Specifically, we discuss their use as efficient drug delivery carriers and role in mediating monotherapy and synergistic therapy using multiple modes. Also, we specifically review the application of nanomedicine constructed through biomimetic mineralization strategies using natural proteins and metal ions in improving the efficiency of tumor immunotherapy.

Advanced protein-embedded bimetallic nanocomposite optimized for in vivo fluorescence and magnetic resonance bimodal imaging

HYPOTHESIS

The development of bimodal imaging probes represents a hot topic of current research. Herein, we deal with developing an innovative bimodal contrast agent enabling fluorescence imaging (FI)/magnetic resonance imaging (MRI) and, simultaneously, consisting of biocompatible nanostructures. Optimized synthesis of advanced protein-embedded bimetallic (APEBM) nanocomposite containing luminescent gold nanoclusters (AuNC) and superparamagnetic iron oxide nanoparticles (SPION), suitable for in vivo dual-modal FI/MR imaging is reported.

EXPERIMENTS

The APEBM nanocomposite was prepared by a specific sequential one-pot green synthetic approach that is optimized to increase metals (Au, Fe) content and, consequently, the imaging ability of the resulting nanostructures. The protein matrix, represented by serum albumin, was intentionally chosen, and used since it creates an efficient protein corona for both types of optically/magnetically-susceptible nanostructures (AuNC, SPION) and ensures biocompatibility of the resulting APEBM nanocomposite although it contains elevated metal concentrations (approx. 1 mg·mL-1 of Au, around 0.3 mg·mL-1 of Fe). In vitro and in vivo imaging was performed.

FINDINGS

Successful in vivo FI and MRI recorded in healthy mice corroborated the applicability of the APEBM nanocomposite and, simultaneously, served as a proof of concept concerning the potential future exploitation of this new FI/MRI bimodal contrast agent in preclinical and clinical practice.

Probing the influence of strontium doping and annealing temperature on the structure and biocompatibility of hydroxyapatite nanorods

Among numerous biologically important metal cations, strontium (Sr2+) has received much attention in bone tissue regeneration because of its osteoinductive properties combined with its ability to inhibit osteoclast activity. In this study, strontium-doped hydroxyapatite (Sr-HAp) nanorods with varying molar ratios of Ca : Sr (10 : 0, 9 : 1, 5 : 5, 3 : 7 and 0 : 10) were synthesized using the chemical precipitation technique. The synthesized Sr-HAp nanostructures were characterized using powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy, energy dispersive X-ray spectroscopy, and Raman and Fourier transform infrared (FTIR) spectroscopies to understand their structural and morphological features, and composition. XRD results revealed the formation of HAp nanostructures, whose unit cell volume increased as a function of the dopant level. The reaction process investigation showed the formation of hydroxyapatite (HAp), strontium apatite (SAp) and various Sr-HAp phases. FESEM micrographs displayed the morphological transformation of Sr-HAp from nanorods to nanosheets upon increasing the dopant level. In the FTIR spectra, the bands of the PO43- group shifted towards a lower wavenumber upon increasing the dopant concentration in Sr-HAp that signifies the structural distortion due to the presence of a large amount of strontium ions. The peaks of PO43- and OH- vibrations in the Raman spectra were further analysed to corroborate the structural distortion of Sr-HAp. Selected area electron diffraction patterns obtained using TEM reveal the reduced crystallinity of Sr-HAp due to Sr-doping, which is in line with the XRD results. Finally, the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay showed that the synthesized Sr-HAp has no toxic effect on the survival and growth of mesenchymal stem cells. In summary, the synthesized novel Sr-HAp nanorods exhibit great promise for bone tissue engineering applications.

Silicon and gadolinium co-doped hydroxyapatite/PLGA scaffolds with osteoinductive and MRI dual functions

Introduction: An ideal bone repair scaffold should have dual functions of osteoinductive ability and in vivo imaging. In this study, the simultaneous substitution of silicon (Si) and gadolinium (Gd) in hydroxyapatite (HA) as potential multifunctional bone graft materials has been successfully developed. Methods: A series of HA nanoparticles (HA NPs) doped with different proportions of Si and Gd were prepared. The chemical structure and phase composition of the materials were analyzed using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The microstructure, magnetic properties, surface potential, and cytotoxicity of the materials were also analyzed. The magnetic resonance imaging (MRI) effect of Gd&Si-HA/poly(lactic-co-glycolic acid) (Gd&Si-HA/PLGA) composite materials was evaluated. Osteogenic-related gene expression, alkaline phosphatase (ALP) level, and mineralization capacity of MC3T3-E1 cultured on Gd&Si-HA/PLGA composite materials were also detected. Results and Discussion: The 1.5Gd&Si-HA@PLGA group showed good ability to promote osteogenic differentiation of cells. The MRI effect of the 1.5Gd&Si-HA@PLGA scaffold was observable. This HA material containing Si and Gd co-doping has a broad application prospect in the field of bone tissue engineering owing to its ability to enhance osteoinductive property and improve MRI effect.

The homologous tumor-derived-exosomes loaded with miR-1270 selectively enhanced the suppression effect for colorectal cancer cells

BACKGROUND

Colorectal cancer (CRC), known as prevalent cancer, has risen to be the leading cause of cancer-related death. Engineered exosomes had attracted much attention since they acted as carriers to deliver small molecule drugs, therapeutic nucleic acids, and polypeptides to treat a series of cancers.

METHODS AND RESULTS

Here, we found that the PKH-26 labeled exosomes, which were derived from the CRC cells, could be efficiently absorbed by SW1116 cells and had an abundant fluorescence distribution in tumors, compared with the exosomes derived from mesenchymal stem cells (MSC) and HepG2 cells. This Research demonstrated that engineered CRC-exosomes loaded with functional miR-1270 (Exo-miR-1270) enriched in miR-1270 strongly inhibited the proliferation by CCK-8 and EdU assays, migration by wound-healing and transwell assays, and promoted the apoptosis for CRC cells through flow cytometry. MiR-1270 overexpression delivered by CRC exosomes contributed to inhibiting the tumor growth potential of CRC in vivo and increasing the overall survival of the mice. Moreover, the safety evaluation results showed that CRC-exosomes loaded with functional miR-1270-mimics had no toxicity for other organs by histopathological analysis and no influence on the vital chemistry and hematology parameters for mice in vivo safety evaluation.

CONCLUSION

These results indicate that Exo-miR-1270 can effectively treat CRC tumors by intravenous administration. Our work provided a foundation that the homologous tumor-derived exosomes mediated miRNA delivery for the treatment of CRC.

High-aspect-ratio nanostructured hydroxyapatite: towards new functionalities for a classical material

Hydroxyapatite-based materials have been widely used in countless applications, such as bone regeneration, catalysis, air and water purification or protein separation. Recently, much interest has been given to controlling the aspect ratio of hydroxyapatite crystals from bulk samples. The ability to exert control over the aspect ratio may revolutionize the applications of these materials towards new functional materials. Controlling the shape, size and orientation of HA crystals allows obtaining high aspect ratio structures, improving several key properties of HA materials such as molecule adsorption, ion exchange, catalytic reactions, and even overcoming the well-known brittleness of ceramic materials. Regulating the morphogenesis of HA crystals to form elongated oriented fibres has led to flexible inorganic synthetic sponges, aerogels, membranes, papers, among others, with applications in sustainability, energy and catalysis, and especially in the biomedical field.

Cleaner Leather Tanning and Post-Tanning Processes Using Oxidized Alginate as Biodegradable Tanning Agent and Nano-Hydroxyapatite as Potential Flame Retardant

In this study, sodium alginate (SA) was oxidized with potassium periodate to produce an alginate-based tanning agent. Using OSA as a biodegradable tanning agent and a nano-hydroxyapatite (nano-HAp) low concentration suspension to give flame retardancy to leather, eco-design concepts were applied to establish a chrome-, aldehyde-, and phenol-free tanning process. Micro-DSC, 1H unilateral nuclear magnetic resonance (NMR), attenuated total reflection mode Fourier transform infrared spectroscopy (FTIR-ATR), and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) were used to investigate the complex matrix collagen-OSA-nano-HAp. Micro-differential scanning calorimetry (micro-DSC) was used to assess OSA's ability to interact with collagen and stabilize the collagen-OSA matrix, while 1H unilateral (NMR) was used to investigate the aqueous environment and its limitations around collagen molecules caused by their association with OSA and nano-HAp. Industrial standard tests were used to assess the mechanical properties and fire resistance of the new leather prototype. The findings reported here indicate that both OSA and nano-HAp are suitable alternatives for cleaner tanning technologies and more sustainable leather.

Mn-Doped Nano-Hydroxyapatites as Theranostic Agents with Tumor pH-Amplified MRI-Signal Capabilities for Guiding Photothermal Therapy

Background

The integration of diagnostic and therapeutic functions into a biosafe nanoplatform with intelligent response functions at the tumor microenvironment (TME) is a promising strategy for cancer therapy.

Methods

Mn-doped nano-hydroxyapatite (nHAPMn) nanoparticles were successfully prepared via a simple coprecipitation method for magnetic resonance imaging (MRI)-guided photothermal therapy. This study is the first to report on the use of Mn to render biodegradable hydroxyapatite suitable for MRI and effective photothermal therapy (PTT) simultaneously by regulating the pH of nHAPMn during the preparation process.

Results

Combined with near-infrared (NIR) laser irradiation, a photothermal conversion efficiency of 26% and effective photothermal lethality in vitro were achieved. Moreover, the degradation of nHAPMn led to the release of Mn ions and amplified the MRI signals in an acidic TME, which confirmed that nHAPMn had a good pH-responsive MRI capacity in solid tumors. In animal experiments, tumors in the nHAPMn5+NIR group completely abated after 14 days of treatment, with no significant recurrence during the experiment.

Conclusion

Therefore, nHAPMn is promising as a nanotheranostic agent and can be effective in clinical diagnosis and therapy for treating cancer.

The biological functions of europium-containing biomaterials: A systematic review

The biological functions of rare-earth elements (REEs) have become a focus of intense research. Recent studies have demonstrated that ion doping or alloying of some REEs can optimize the properties of traditional biomaterials. Europium (Eu), which is an REE with low toxicity and good biocompatibility, has promising applications in biomedicine. This article systematically reviews the osteogenic, angiogenic, neuritogenic, antibacterial, and anti-tumor properties of Eu-containing biomaterials, thereby paving the way for biomedical applications of Eu. Data collection for this review was completed in October 2022, and 30 relevant articles were finally included. Most articles indicated that doping of Eu ions or Eu-compound nanoparticles in biomaterials can improve their osteogenic, angiogenic, neuritogenic, antibacterial, and anti-tumor properties. The angiogenic, antibacterial, and potential neuritogenic effects of Eu(OH)₃ nanoparticles have also been demonstrated.

Hydroxyapatite-based composites: Excellent materials for environmental remediation and biomedical applications

Given their unique characteristics and properties, Hydroxyapatite (HAp) nanomaterials and nanocomposites have been used in diverse advanced catalytic technologies and in the field of biomedicine, such as drug and protein carriers. This paper examines the structure and properties of the manufactured HAp as well as a variety of synthesis methods, including hydrothermal, microwave-assisted, co-precipitation, sol-gel, and solid-state approaches. Additionally, the benefits and drawbacks of various synthesis techniques and ways to get around them to spur more research are also covered. This literature discusses the various applications, including photocatalytic degradation, adsorptions, and protein and drug carriers. The photocatalytic activity is mainly focused on single-phase, doped-phase, and multi-phase HAp, while the adsorption of dyes, heavy metals, and emerging pollutants by HAp are discussed in the manuscript. Furthermore, the use of HAp in treating bone disorders, drug carriers, and protein carriers is also conferred. In light of this, the development of HAp-based nanocomposites will inspire the next generation of chemists to improve upon and create stable nanoparticles and nanocomposites capable of successfully addressing major environmental concerns. This overview's conclusion offers potential directions for future study into HAp synthesis and its numerous applications.

Microfluidic Fabrication of Gadolinium-Doped Hydroxyapatite for Theragnostic Applications

Among the several possible uses of nanoparticulated systems in biomedicine, their potential as theragnostic agents has received significant interest in recent times. In this work, we have taken advantage of the medical applications of Gadolinium as a contrast agent with the versatility and huge array of possibilities that microfluidics can help to create doped Hydroxyapatite nanoparticles with magnetic properties in an efficient and functional way. First, with the help of Computational Fluid Dynamics (CFD), we performed a complete and precise study of all the elements and phases of our device to guarantee that our microfluidic system worked in the laminar regime and was not affected by the presence of nanoparticles through the flow requisite that is essential to guarantee homogeneous diffusion between the elements or phases in play. Then the obtained biomaterials were physiochemically characterized by means of XRD, FE-SEM, EDX, confocal Raman microscopy, and FT-IR, confirming the successful incorporation of the lanthanide element Gadolinium in part of the Ca (II) binding sites. Finally, the magnetic characterization confirmed the paramagnetic behaviour of the nanoparticles, demonstrating that, with a simple and automatized system, it is possible to obtain advanced nanomaterials that can offer a promising and innovative solution in theragnostic applications.

Biomaterial-assisted tumor therapy: A brief review of hydroxyapatite nanoparticles and its composites used in bone tumors therapy

Malignant bone tumors can inflict significant damage to affected bones, leaving patients to contend with issues like residual tumor cells, bone defects, and bacterial infections post-surgery. However, hydroxyapatite nanoparticles (nHAp), the principal inorganic constituent of natural bone, possess numerous advantages such as high biocompatibility, bone conduction ability, and a large surface area. Moreover, nHAp's nanoscale particle size enables it to impede the growth of various tumor cells via diverse pathways. This article presents a comprehensive review of relevant literature spanning the past 2 decades concerning nHAp and bone tumors. The primary goal is to explore the mechanisms responsible for nHAp's ability to hinder tumor initiation and progression, as well as to investigate the potential of integrating other drugs and components for bone tumor diagnosis and treatment. Lastly, the article discusses future prospects for the development of hydroxyapatite materials as a promising modality for tumor therapy.

In Situ Facile Synthesis of Low-Cost Biogenic Eggshell-Derived Nanohydroxyapatite/Chitosan Biocomposites for Orthopedic Implant Applications

In situ facile synthesis and the characterization of nanohydroxyapatite/chitosan (nHAP/CS) biocomposites were investigated for examining their potential applications in orthopedic implant technology. Firstly, the bare nHAP, europium-doped hydroxyapatite (Eu-nHAP), yttrium-doped hydroxyapatite (Y-nHAP), and Eu- and Y-codoped hydroxyapatite (Eu,Y-nHAP) nanoparticles were synthesized by the wet precipitation technique using biowaste-eggshell-derived calcium oxide powders. Then, through ultrasonication using the nanohydroxyapatite/chitosan mixtures (molar ratio = 1:2), the nHAP/CS, Eu-nHAP/CS, Y-nHAP/CS, and Eu,Y-nHAP/CS biocomposites were fabricated. Among them, Eu,Y-nHAP/CS showed higher cell viability (94.9%), higher solubility (pH = 7.6 after 21 days), and greater antibacterial activity than those of the other composites. In addition, Eu,Y-nHAP/CS exhibited improved mechanical properties compared with the other composites. For example, the nanoindentation test displayed the Eu,Y-nHAP/CS-coated 316L stainless steel implant to possess a higher Young's modulus value (9.24 GPa) and greater hardness value (300.71 MPa) than those of the others. The results indicate that the biomass-eggshell-derived Eu,Y-doped nHAP is of good use for orthopedic implant applications.

Hydroxyapatite Nanoparticles for Improved Cancer Theranostics

Beyond their well-known applications in bone tissue engineering, hydroxyapatite nanoparticles (HAp NPs) have also been showing great promise for improved cancer therapy. The chemical structure of HAp NPs offers excellent possibilities for loading and delivering a broad range of anticancer drugs in a sustained, prolonged, and targeted manner and thus eliciting lower complications than conventional chemotherapeutic strategies. The incorporation of specific therapeutic elements into the basic composition of HAp NPs is another approach, alone or synergistically with drug release, to provide advanced anticancer effects such as the capability to inhibit the growth and metastasis of cancer cells through activating specific cell signaling pathways. HAp NPs can be easily converted to smart anticancer agents by applying different surface modification treatments to facilitate the targeting and killing of cancer cells without significant adverse effects on normal healthy cells. The applications in cancer diagnosis for magnetic and nuclear in vivo imaging are also promising as the detection of solid tumor cells is now achievable by utilizing superparamagnetic HAp NPs. The ongoing research emphasizes the use of HAp NPs in fabricating three-dimensional scaffolds for the treatment of cancerous tissues or organs, promoting the regeneration of healthy tissue after cancer detection and removal. This review provides a summary of HAp NP applications in cancer theranostics, highlighting the current limitations and the challenges ahead for this field to open new avenues for research.

Microenvironmental Behaviour of Nanotheranostic Systems for Controlled Oxidative Stress and Cancer Treatment

The development of smart, efficient and multifunctional material systems for diseases treatment are imperative to meet current and future health challenges. Nanomaterials with theranostic properties have offered a cost effective and efficient solution for disease treatment, particularly, metal/oxide based nanotheranostic systems already offering therapeutic and imaging capabilities for cancer treatment. Nanoparticles can selectively generate/scavenge ROS through intrinsic or external stimuli to augment/diminish oxidative stress. An efficient treatment requires higher oxidative stress/toxicity in malignant disease, with a minimal level in surrounding normal cells. The size, shape and surface properties of nanoparticles are critical parameters for achieving a theranostic function in the microenvironment. In the last decade, different strategies for the synthesis of biocompatible theranostic nanostructures have been introduced. The exhibition of therapeutics properties such as selective reactive oxygen species (ROS) scavenging, hyperthermia, antibacterial, antiviral, and imaging capabilities such as MRI, CT and fluorescence activity have been reported in a variety of developed nanosystems to combat cancer, neurodegenerative and emerging infectious diseases. In this review article, theranostic in vitro behaviour in relation to the size, shape and synthesis methods of widely researched and developed nanosystems (Au, Ag, MnO_x, iron oxide, maghemite quantum flakes, La₂O_3−x, TaO_x, cerium nanodots, ITO, MgO_1−x) are presented. In particular, ROS-based properties of the nanostructures in the microenvironment for cancer therapy are discussed. The provided overview of the biological behaviour of reported metal-based nanostructures will help to conceptualise novel designs and synthesis strategies for the development of advanced nanotheranostic systems.

Molecular imaging nanoprobes for theranostic applications

As a non-invasive imaging monitoring method, molecular imaging can provide the location and expression level of disease signature biomolecules in vivo, leading to early diagnosis of relevant diseases, improved treatment strategies, and accurate assessment of treating efficacy. In recent years, a variety of nanosized imaging probes have been developed and intensively investigated in fundamental/translational research and clinical practice. Meanwhile, as an interdisciplinary discipline, this field combines many subjects of chemistry, medicine, biology, radiology, and material science, etc. The successful molecular imaging not only requires advanced imaging equipment, but also the synthesis of efficient imaging probes. However, limited summary has been reported for recent advances of nanoprobes. In this paper, we summarized the recent progress of three common and main types of nanosized molecular imaging probes, including ultrasound (US) imaging nanoprobes, magnetic resonance imaging (MRI) nanoprobes, and computed tomography (CT) imaging nanoprobes. The applications of molecular imaging nanoprobes were discussed in details. Finally, we provided an outlook on the development of next generation molecular imaging nanoprobes.

Fluorescence conjugated nanostructured cobalt-doped hydroxyapatite platform for imaging-guided drug delivery application

Multifunctional nanomaterials developed from hydroxyapatite (HAp) with enhanced biological characteristics have recently attracted attention in the biomedical field. The goal of this study is to investigate the potential applications of cobalt-doped HAp (Co-HAp) in the biomedical imaging and therapeutic applications. The co-precipitation approach was used to substitute different molar concentrations of Ca²⁺ ions with cobalt (Co²⁺) in HAp structure. The synthesized Co-HAp nanoparticles were studied using various sophisticated techniques to verify the success rate of the doping method. The specific crystal structure, functional groups, size, morphology, photoluminescence property, and thermal stability of the Co-HAp nanoparticles were analyzed based on the characterization results. The computational modelling of doped and undoped HAp reveals the difference in crystal structure parameters. The cytotoxicity study (MTT assay and AO/PI/Hoechst fluorescence staining) reveals the non-toxic characteristics of Co-HAp nanoparticles on MDA-MB-231 breast cancer cell lines. The DOX was loaded onto Co-HAp, showing the maximum drug loading capacity for 2.0 mol% Co-HAp. Drug release was estimated in five different pH environments with various time intervals over 72 h. Furthermore, 2.0 mol% Co-HAp shows excellent fluorescence sensitivity with FITC-conjugated MDA-MB-231 cell lines. These results suggest that cobalt improved the fluorescence intensity of FITC-labeled HAp nanoparticles. This work highlights the promising application of Co-HAp nanoparticles with significant enhanced fluorescence activity for imaging-guided drug delivery system.

A scalable, low-cost and green strategy for the synthesis of ultralong hydroxyapatite nanowires using peanut oil

A scalable green and low-cost synthesis of ultralong hydroxyapatite nanowires using peanut oil is reported, which can be scaled up for large-scale low-cost production of ultralong hydroxyapatite nanowires and the fire-resistant inorganic paper.

Zn/Sr dual ions-collagen co-assembly hydroxyapatite enhances bone regeneration through procedural osteo-immunomodulation and osteogenesis

The immune microenvironment induced by biomaterials played vital roles in bone regeneration. Hydroxyapatite (HA) and its ion-substituted derivates represent a large class of core inorganic materials for bone tissue engineering. Although ion substitution was proved to be a potent way to grant HA more biological functions, few studies focused on the immunomodulatory properties of ion-doped HA. Herein, to explore the potential osteoimmunomodulatory effects of ion-doped HA, zinc and strontium co-assembled into HA through a collagen template biomimetic way (ZnSr-Col-HA) was successfully achieved. It was found that ZnSr-Col-HA could induce a favorable osteo-immune microenvironment by stimulating macrophages. Furthermore, ZnSr-Col-HA demonstrated a procedural promoting effect on osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro. Specifically, the osteo-immune microenvironment acted as a dominant factor in promoting osteogenic gene expressions at the early stage through OSM signal pathway. Whereas the direct stimulating effects on BMSCs by Zn²⁺/Sr²⁺ were more effectively at the later stage with Nfatc1/Maf and Wnt signals activated. In vivo study confirmed strong promoting effects of ZnSr-Col-HA on critical-sized cranial defect repair. The current study indicated that such a combined biomaterial design philosophy of dual ion-doping and biomimetic molecular co-assembly to endow HA applicable osteoimmunomodulatory characteristics might bring up a new cutting-edge concept for bone regeneration study.

•

Zn/Sr dual ions-collagen co-assembly hydroxyapatite (ZnSr-Col-HA) was achieved via a molecular template biomimetic way.

•

A procedural promoting effect of ZnSr-Col-HA on osteogenic differentiation of BMSCs was firstly found.

•

A novel material design philosophy was proposed for dual ions-doped biomimetic HA with osteoimmunomodulatory properties.

Tumor Diagnosis and Therapy Mediated by Metal Phosphorus-Based Nanomaterials

Metal phosphorus-based nanomaterials (Metal-P NMs) including metal phosphate nanomaterials, metal phosphide nanomaterials, and metal-black phosphorus (Metal-BP) nanocomposite are widely used in the field of biomedicine owing to their excellent physical and chemical properties, biocompatibility, and biodegradability. In recent years, metal phosphate nanomaterials and Metal-BP nanocomposite acted as medicine delivery system have made breakthroughs in tumor diagnosis including magnetic resonance imaging, fluorescence imaging, photoacoustic imaging, nuclear imaging, and therapies including chemotherapy, gene therapy, photothermal therapy, photodynamic therapy, and radiation therapy. Metal phosphate nanomaterials have good biodegradability, especially calcium-based metal phosphate nanomaterials can be dissolved into nontoxic ions and participate in the metabolisms of normal organs. Compared with metal phosphate nanomaterials, metal phosphide nanomaterials have excellent optical, magnetic, and catalytic properties, which can be used as multifunctional diagnostic nanoplatforms and therapeutic agents for chemodynamic therapy, photothermal therapy, or immunotherapy. The latest developments in Metal-P NMs, covering the range of preparation methods and biological applications, such as serving as drug carriers, tumor diagnosis, and therapy, are focused. All in all, the current trends, key issues, future prospects and challenges of Metal-P NMs are concluded and discussed, which are important for the development of this research field and shining more lights on this direction.

Biomaterials for Orthopaedic Diagnostics and Theranostics

Despite widespread use of conventional diagnostic methods in orthopaedic applications, limitations still exist in detection and diagnosing many pathologies especially at early stages when intervention is most critical. The use of biomaterials to develop diagnostics and theranostics, including nanoparticles and scaffolds for systemic or local applications, has significant promise to address these shortcomings and enable successful clinical translation. These developments in both modular and holistic design of diagnostic and theranostic biomaterials may improve patient treatments for myriad orthopaedic applications ranging from cancer to fractures to infection.

Mesoporous silica nanoparticles with fluorescent and magnetic dual-imaging properties to deliver fucoidan

Fucoidan is a sulfated polysaccharide that is mainly extracted from brown algae. In this study, a simple and efficient method of hot water extraction, which is commonly used in industry, was used to obtain crude polysaccharides. Furthermore, agricultural waste was our source of biogenic silica, and it was then synthesized into drug carrier-nanoparticles. In combination with a popular drug delivery system, the carrier was doped with a dual imaging lanthanide metal and loaded with the drug. Fucoidan has decent bioactivities, such as anticancer activity. The extracted fucoidan is expensive, but we can exploit the nanocarrier to reduce the necessary dose of fucoidan. The experimental section is divided into three parts. The first part analyzed the chemical properties and antioxidant activity of the extracted fucoidan. The second part endowed the material with fluorescent and magnetic dual-imaging properties by incorporating Eu³⁺ and Gd³⁺ during the synthesis of rice husk mesoporous silica nanoparticles (rMSNs). The third part tested the anti-cancer ability of rMSN-EuGd@Fucoidan. The drug delivery system rMSN-EuGd@Fucoidan, which was synthesized in this research, showed cytotoxicity against A549 cancer cells. The results of the cell viability tests for fucoidan and rMSN-EuGd@Fucoidan were 58% and 47%, respectively. After inverse calculation from the TGA data yielded a value of 54.5%, we determined that the amount of fucoidan loaded in rMSN-EuGd@Fucoidan was 109 μg. Our results showed that rMSN-EuGd@Fucoidan needs less fucoidan to be effective, and its toxicity against A549 cells is higher than that of fucoidan.

La3+ and F- dual-doped multifunctional hydroxyapatite nanoparticles: Synthesis and characterization

Hydroxyapatite (HA) co-doped with La³⁺ and F^- ions were synthesized by the precipitation method and sintered at 1,100°C for 1 hr. Samples were characterized by the standard experimental methods including the density, X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy (SEM) to investigate their microstructure, phase formation, and bonding characteristics in detail. Moreover, the materials produced were identified using the microhardness tests. It was observed that in the most of materials, the hydroxyapatite was found to be the main phase with a minor amount of β-tricalcium phosphate (β-TCP). Furthermore, the presence of fluoride and small amount of β-TCP was verified with all the characteristic FTIR bands of hydroxyapatite for the majority of samples studied. The result in SEM evaluation is that the produced HA powders have less deformed, uniformly distributed, and regularly shaped particles. Here, the material density has changed towards a less dense state with the increasing rate of La doping, but statistically significant difference was not obtained (p, .1942 > .05) with increase of the F doping. A significant difference was obtained the microhardness values between La³⁺ and F^- ions co-doped HA materials and pure HA (p [.0053] < .05). Accordingly, this study confirmed that since the La³⁺ and F^- ions can potentially increase the efficacy of HA. According to the spectral, mechanical, and microstructure analysis result, this material can be as a good candidate product for use as an occluding material for dental application.

Doping gadolinium versus lanthanum into hydroxyapatite particles for better biocompatibility in bone marrow stem cells

Lanthanide ions (Ln³⁺) doped hydroxyapatite (HAP) particles are well established in biomedical areas. Although Ln elements are closely located in the periodic table and have plenty of similar characteristics, the minor differences in the effective ionic radii could cause alterations in the physicochemical and biological properties of HAP substitutes. The present study synthesized lanthanum-(La-) and gadolinium-(Gd-) doped HAP particles (La-HAP and Gd-HAP). And the effects of two types of particles on bone marrow stem cells (BMSCs) viability were also measured and compared in vitro. The results indicated that the Gd-HAP adsorbed more serum proteins from culture media and inhibited the new layer of apatite formation on its surface when comparing to La-HAP with a similar crystalline structure, particle size, and Zeta potential. These surface modifications can significantly reduce the cell adhesion of Gd-HAP, simultaneously decreasing the Gd-HAP particle uptake efficiency. Moreover, the cell viability of Gd-HAP remained higher than that of La-HAP in culture periods. We concluded that a slight variation in the effective ionic radii between Gd³⁺ and La³⁺ could alter the adsorption of serum proteins on the particles' surface, modulating subsequent cellular responses. The present work provides an interesting view that Gd-HAP is endowed with better cellular biocompatibility than La-HAP.

Cellulose-Chitosan-Nanohydroxyapatite Hybrid Composites by One-Pot Synthesis for Biomedical Applications

The development of organic–inorganic hybrid materials deserves special interest for bone tissue engineering applications, where materials must have properties that induce the survival and activation of cells derived from the mesenchyme. In this work, four bio-nanocomposites based on cellulose and variable content of chitosan, from 15 to 50 w% based on cellulose, with nanohydroxyapatite and β-Glycerophosphate as cross-linking agent were synthesized by simplified and low-energy-demanding solvent exchange method to determine the best ratio of chitosan to cellulose matrix. This study analyzes the metabolic activity and survival of human dermal fibroblast cells cultivated in four bio-nanocomposites based on cellulose and the variable content of chitosan. The biocompatibility was tested by the in vitro cytotoxicity assays Live/Dead and PrestoBlue. In addition, the composites were characterized by FTIR, XRD and SEM. The results have shown that the vibration bands of β-Glycerophosphate have prevailed over the other components bands, while new diffraction planes have emerged from the interaction between the cross-linking agent and the biopolymers. The bio-nanocomposite micrographs have shown no surface porosity as purposely designed. On the other hand, cell death and detachment were observed when the composites of 1 and 0.1 w/v% were used. However, the composite containing 10 w% chitosan, against the sum of cellulose and β-Glycerophosphate, has shown less cell death and detachment when used at 0.01 w/v%, making it suitable for more in vitro studies in bone tissue engineering, as a promising economical biomaterial.

Improved osteogenesis and angiogenesis of theranostic ions doped calcium phosphates (CaPs) by a simple surface treatment process: A state-of-the-art study

Surface treatment of biomaterials could enable reliable and quick cellular responses and accelerate the healing of the host tissue. Here, a series of calcium phosphates (CaPs) were surface treated by hydrogen peroxide (H₂O₂) and the treatment effects were physicochemically and biologically evaluated. For this aim, as-synthesized CaPs doped with strontium (Sr²⁺), iron (Fe²⁺), silicon (Si⁴⁺), and titanium (Ti⁴⁺) ions were sonicated in H₂O₂ media. The results showed that the specific surface area and zeta potential values of the surface-treated CaPs were increased by ~50% and 25%, respectively. Moreover, the particle size and the band-gap (Eg) values of the surface-treated CaPs were decreased by ~25% and ~2-10%, respectively. The concentration of oxygen vacancies was increased in the surface-treated samples, which was confirmed by the result of ultraviolet (UV), photoluminescence (PL), Commission Internationale de l'éclairage (CIE 1931), and X-ray photoelectron spectroscopy (XPS) analyses. In vitro cellular assessments of surface-treated CaPs exhibited an improvement in cytocompatibility, reactive oxygen species generation (ROS) capacity, bone nodule formation, and the migration of cells up to ~8%, 20%, 35%, and 13%, respectively. Based on the obtained data, it can be stated that improved physicochemical properties of H₂O₂-treated CaPs could increase the ROS generation and subsequently enhance the biological activities. In summary, the results demonstrate the notable effect of the H₂O₂ surface treatment method on improving surface properties and biological performance of CaPs.

Customized Cellulose Fiber Paper Enabled by an In Situ Growth of Ultralong Hydroxyapatite Nanowires

Cellulose fiber (CF) paper is a low-cost, sustainable, and flexible substrate, which has gained increasing interest recently. Before practical usage, the functionalization of the pristine CF paper is indispensable to meet requirements of specific applications. Different from conventional surface modification or physical mixing methods, we report in situ growth of ultralong hydroxyapatite nanowires (HAPNWs) with lengths larger than 10 μm on the CF paper. HAPNWs are radially aligned on the surface of CFs, creating a micro/nanoscale hierarchical structure. By means of the excellent ion exchange ability of HAP and the hierarchical structure, the functions of the CF paper can be easily customized. As a proof-of-concept, we demonstrate two kinds of functional CF paper: (1) the photoluminescent CF paper by doping Eu³⁺ and Tb³⁺ ions into the crystal lattice of HAPNWs and (2) the superhydrophobic CF paper by coating poly(dimethylsiloxane) on the HAPNW hierarchical structure, which can be applied for self-cleaning and oil/water separation. It is expected that an in situ growth of ultralong HAPNWs will provide an instructive guideline for designing a CF paper with specific functions.

Pourbaix-Guided Mineralization and Site-Selective Photoluminescence Properties of Rare Earth Substituted B-Type Carbonated Hydroxyapatite Nanocrystals

Rare-earth labeling in biological apatite could provide critical information for the pathologic transition (osteoclastic) and physiologic regeneration (osteogenesis) of bone and teeth because of their characteristic site-sensitive fluorescence in different coordinative conditions of various tissues in many biological processes. However, the rare-earth labeling method for biological apatites, i.e., carbonated-hydroxyapatite, has been rarely found in the literature. In this paper, we report a Pourbaix-diagram guided mineralizing strategy to controllable carbonation and doping of rare-earth ions in the hydroxyapatite (HA) lattice. The carbonation process of hydroxyapatite was achieved by controllable mineralization in hydrothermal condition with K₂CO₃ as the carbonate source, which results into the pure B-type carbonated hydroxyapatite (CHA) with tunable carbonate substitution degree. All of the as-synthesized materials crystalized into P63/m (No. 176) space group with the lattice parameter of a decreases and c increases with the increasing of carbonate content in the reactants. Structural refinement results revealed that the substitution of planar CO₃²⁻ is superimposed on one of the faces of PO₄³⁻ tetrahedral sub-units with a rotation angle of 30° in reference to c-axis. All of the hydrothermally synthesized CHA nanocrystals show hexagonal rod-like morphology with the length of 70–110 nm and diameter of 21–35 nm, and the decreasing length/diameter ratio from 3.61 to 2.96 from low to high carbonated level of the samples. Five rare-earth cations, of Pr³⁺, Sm³⁺, Eu³⁺, Tb³⁺, and Ho³⁺, were used as possible probe ions that can be doped into either HA or CHA lattice. The site-preference of Tb³⁺ doping is the same in the crystallographic site of HA and CHA according to characteristic emission peaks of ⁵D₄–⁷F_j (j = 3–6) transitions in their photoluminescent spectroscopy. Our work provides a controllable carbonation method for rare-earth labeling hydroxyapatite nanomaterials with potential biologically active implant powders for bone repair and tissue regeneration.

Electrodeposited Hydroxyapatite-Based Biocoatings: Recent Progress and Future Challenges

Hydroxyapatite has become an important coating material for bioimplants, following the introduction of synthetic HAp in the 1950s. The HAp coatings require controlled surface roughness/porosity, adequate corrosion resistance and need to show favorable tribological behavior. The deposition rate must be sufficiently fast and the coating technique needs to be applied at different scales on substrates having a diverse structure, composition, size, and shape. A detailed overview of dry and wet coating methods is given. The benefits of electrodeposition include controlled thickness and morphology, ability to coat a wide range of component size/shape and ease of industrial processing. Pulsed current and potential techniques have provided denser and more uniform coatings on different metallic materials/implants. The mechanism of HAp electrodeposition is considered and the effect of operational variables on deposit properties is highlighted. The most recent progress in the field is critically reviewed. Developments in mineral substituted and included particle, composite HAp coatings, including those reinforced by metallic, ceramic and polymeric particles; carbon nanotubes, modified graphenes, chitosan, and heparin, are considered in detail. Technical challenges which deserve further research are identified and a forward look in the field of the electrodeposited HAp coatings is taken.

Impact of Dopants on the Electrical and Optical Properties of Hydroxyapatite

This chapter deals with the effect of alternating electrical current on hydroxyapatite [HAp, Ca10(PO4)6(OH)2] and doped HAp along with their optical response and the processes involved. The dielectric constant, permittivity and ac conductivity were analyzed to have an insight into the surface charge polarization phenomenon. Further, the magnitude and the polarity of the surface charges, microstructure, and phases also play significant role in the cell proliferation and growth on the implants. Besides, the mechanism behind the electrical properties and the healing of bone fracture are discussed. The influence of various dopants on the optical properties of HAp viz., absorbance, transmission, band gaps and defects energy levels are analyzed along with the photoluminescence and excitation independent emission. In the future outlook, the analysis of effect of doping is summarized and its impact on the next generation biomaterials are elucidated.

Emission-tunable probes using terbium(III)-doped self-activated luminescent hydroxyapatite for in vitro bioimaging

Lanthanide ion (Ln³⁺)-doped nanoscale hydroxyapatites (nHAp) with tunable luminescence have attracted increasing attention due to their potential applications as useful biomedical tools (e.g., imaging and clinical therapy). In this study, we reported that doping Terbium (III) ions (Tb³⁺) in self-activated luminescent nHAp via a facile hydrothermal reaction, using trisodium citrate (Cit^3-), generates unique emission-tunable probes known as Cit/Tb-nHAp. The morphology, crystal phase, and luminescence properties of these Cit/Tb-nHAp probes are studied in detail. Moreover, the results demonstrate that the luminescence of self-activated nHAp originates from the carbon dots trapped within the nHAp crystals, in which partial energy transfer occurs from carbon dots (CDs) to Tb³⁺. The color tunability is successfully achieved by regulating the addition of Cit^3-. Biocompatibility study indicates that when co-cultured with C6 glioma cells in vitro for 3 days, ≤800 ppm Cit/Tb-nHAp is not cytotoxic for C6 glioma cells. We also present in vitro data showing efficient cytoplasmic localization of transferrin conjugated Cit/Tb-nHAp into C6 glioma cells by fluorescence cell imaging. We have successfully engineered Cit/Tb-nHAp, a promising biocompatible agent for future in vitro and in vivo fluorescence bioimaging.

Microwave processing of calcium phosphate and magnesium phosphate based orthopedic bioceramics: A state-of-the-art review

The main theme of this paper is to review microwave-assisted synthesis and processing of calcium and magnesium phosphate bioceramics. Microwave processing of advanced materials has been an active field of research for the last three decades and has been already reviewed in the literature. Microwave processing of bioceramics is being pursued for almost the same period of time. Unfortunately, to the best of our knowledge, we are not aware of any comprehensive review in the literature. Our group has been a significant contributor to the field, and we feel that it is an appropriate time for reviewing the state-of-the-art of the field. The paper is divided into several sections. After rationalizing the motivation behind writing this paper in the introduction, the second section builds on some fundamental aspects of microwave-matter interactions. The third section, representing the synthesis aspects, is subdivided into five sub-sections focusing on various calcium and magnesium phosphates in both crystalline and amorphous forms. The fourth section focuses on magnesium phosphate-based bioceramics. The fifth and the sixth section describe results on the utility of microwave assistance in developing multi-functional coatings on medical implants and orthopedic cements respectively. The subsequent section reviews results on microwave sintering of calcium and magnesium phosphates. The paper concludes with remarks on unresolved issues and future directions of research. It is expected that this comprehensive review on the interdisciplinary topic will further propel the exploration of other novel applications of microwave technology in processing biomaterials by a diverse group of scientists and engineers. STATEMENT OF SIGNIFICANCE: 1. This review highlights the broad-spectrum capabilities of microwave applications in processing orthopedic bioceramics. 2. The article covers "processing" in the broadest sense of the word, comprising of material synthesis, sintering, coating formation, and setting of orthopedic cements. It also expands beyond conventional calcium phosphates to include the emergent family of magnesium phosphates. 3. In vitro/in vivo responses of microwave-processed bioceramics are discussed thus providing an integral understanding of biological aspects of these materials. 4. The comprehensive review on this interdisciplinary topic will help researchers in various disciplines to appreciate the significance and usefulness of microwaves in biomaterials processing. Further, we also believe that it will propel the exploration of other novel applications of microwave technology in the biomaterials sector.

Effect of the Fluorine Substitution for –OH Group on the Luminescence Property of Eu3+ Doped Hydroxyapatite

In this study, different fluoridated hydroxyapatite doped with Eu3+ ion nanoparticles were prepared by the hydrothermal method. The relationship between luminescence enhancement of Eu3+ ions and a fluorine substitution ratio for hydroxyl group in hydroxyapatite was discussed. Moreover, the effect of fluorine substitution for a hydroxyl group on phase composition, crystallinity, and crystal size was studied. Phase composition and chemical structures were identified by X-ray diffraction (XRD) and Fourier Transform Infrared (FT-IR) Spectroscopy analyses. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) patterns were performed to analyze the morphology and particle size. X-ray Photoelectron Spectroscopy (XPS) patterns were observed to analyze fluorine substitution for the hydroxyl group and chemical state of Eu3+ ions in fluoridated hydroxyapatite. The results of these experiments indicated that the samples with a different fluorine substitution ratio were prepared successfully by maintaining the apatite structure. With an increasing fluorine substitution ratio, the morphology maintained a rod-like structure but the aspect ratio tended to decrease. XPS patterns displayed that the fluorine replaced the hydroxyl group and brought environmental variation. The fluorine ions could affect the crystal field environment and promote luminescence conversion. There was a linear relationship between the fluorine substitution ratio and luminescence enhancement.

The mineralization, drug release and in vivo bone defect repair properties of calcium phosphates/PLA modified tantalum scaffolds

Calcium phosphate based biomaterials have been widely studied in biomedical areas. Herein, amorphous calcium phosphate (ACP) nanospheres and hydroxyapatite (HA) nanorods were separately prepared and used for coating tantalum (Ta) scaffolds with a polymer of polylactide (PLA). We have found that different crystal phases of calcium phosphate coated on Ta scaffolds displayed different effects on the surface morphologies, mineralization and bovine serum albumin (BSA) release. The ACP-PLA and HA-PLA coated on Ta scaffold were more favorable for in vitro mineralization than bare and PLA coated Ta scaffolds, and resulted in a highly hydrophilic surfaces. Meanwhile, the osteoblast-like cells (MG63) showed favorable properties of adhesion and spreading on both ACP-PLA and HA-PLA coated Ta scaffolds. The ACP-PLA and HA-PLA coated Ta scaffolds showed a high biocompatibility and potential applications for in vivo bone defect repair.

Calcium phosphate modified tantalum scaffolds displayed high performance on mineralization, sustained drug release and in vivo bone defect repair.

In Vivo Assessment of a Hydroxyapatite/κ-Carrageenan-Maleic Anhydride-Casein/Doxorubicin Composite-Coated Titanium Bone Implant

Here, we focus on the fabrications of an osteosarcoma implant for bone repair via the development of a hydroxyapatite/κ-carrageenan-maleic anhydride/casein with doxorubicin (HAP/κ-CA-MA-CAS/DOX) composite-deposited titanium (Ti) plate. The HAP/κ-CA-MA-CAS/DOX material was coated on the Ti plate through the EPD method (electrophoretic deposition), applying direct current (DC) signals to deposit the composite on the surface of the Ti plate. The physicochemical and morphological possessions and biocompatibility in vitro of the prepared nanocomposite were examined to assess its prospective effectiveness for purposes of bone regeneration. Excellent biocompatibility and elevated osteoconductivity were confirmed using MG63 osteoblast-like cells. In vivo studies were performed at tibia sites in Wistar rats, and rapid bone regeneration was detected at four weeks in defective bone. Overall, the studies demonstrate that the HAP/κ-CA-MA-CAS/DOX composite enhances the biocompatible and cell-stimulating biointerface of Ti metallic implants. As such, HAP/κ-CA-MA-CAS/DOX implants are viable prospects for osteosarcoma-affected bone regeneration.

Investigation of nature of starting materials on the construction of hydroxyapatite 1D/3D morphologies

With the increasing requirement of bone repair materials, hydroxyapatite (HA) has been paid widely attention to investigation because of its good bioactivity and osteoconductivity. The structure of HA is a vital factor to expand its application in the field of hard tissue therapy. Thus, many strategies have been utilized in fabricating one-dimensional (1D) and three-dimensional (3D) nanostructured HA. In this paper, we successful synthesize HA with 1D nanofibers and 3D nanostructured microspheres using stearic acid as a template and different phosphates as phosphorus sources under the same synthetic system. The morphology of HA changes from nanofibers with high flexibility to nanostructured microspheres with good sphericity under the synergistic effect of stearic acid and various phosphates. The HA nanofibers and microspheres are promising for applications in biomedical fields. Base on characterization results, the formation mechanisms of HA nanofibers and HA microspheres self-assembled by nanorods are proposed. Furthermore, the HA morphology transition from nanofibers to nanostructured microspheres may be attributed to the formation of polyphosphate-induced water-in-oil microemulsion system in the synthesis process. The finding may provide a new direction to control HA morphology from 1D nanofibers to 3D microspheres based on previous strategies.

Preparation and biological imaging of fluorescent hydroxyapatite nanoparticles with poly(2-ethyl-2-oxazoline) through surface-initiated cationic ring-opening polymerization

Fluorescent hydroxyapatite (HAp) nanoparticles have received significant attention in biomedical fields due to their outstanding advantages, such as low immunogenicity, excellent biocompatibility and biodegradability. However, fluorescent HAp nanoparticles with well controlled size and morphology are coated with hydrophobic molecules and their biomedical applications are largely restricted by their poor dispersibility in physiological solutions. Therefore, surface modification of these hydrophobic fluorescent HAp nanoparticles to render them water dispersibility is of utmost importance for biomedical applications. In this work, we reported for the first time for preparation of water-dispersible hydrophilic fluorescent Eu³⁺-doped HAp nanoparticles (named as HAp-PEOTx) through the cationic ring-opening polymerization using hydrophilic and biocompatible 2-ethyl-2-oxazoline (EOTx) as the monomer. The characterization techniques, such as nuclear magnetic resonance (NMR) spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have been used to characterize these samples. Results confirmed that we could successfully obtain the hydrophilic fluorescent HAp-PEOTx composites through the strategy described above. These fluorescent HAp-PEOTx composites display great water dispersibility, unique fluorescent properties and excellent biocompatibility, making them promising for in vitro bioimaging applications.

Hyaluronan-directed fabrication of co-doped hydroxyapatite as a dual-modal probe for tumor-specific bioimaging

Hyaluronan-directed fabrication of Eu/Ba co-doped hydroxyapatite nanocrystals with recognition capability for dual-modal bioimaging.

Ultrasonic promoted synthesis of Ag nanoparticle decorated thiourea-functionalized magnetic hydroxyapatite: a robust inorganic–organic hybrid nanocatalyst for oxidation and reduction reactions

In this research, ultrasonic synthesis is applied for the fabrication of a novel catalyst, based on immobilization of silver nanoparticles (AgNPs) on thiourea functionalized magnetic hydroxyapatite.

Effect of Hydroxyapatite Nanorods on the Fate of Human Adipose-Derived Stem Cells Assessed In Situ at the Single Cell Level with a High-Throughput, Real-Time Microfluidic Chip

The fate of stem cells at the single cell level with limited communication with other cells is still unknown due to the lack of an efficient tool for highly accurate molecular detection. Moreover, the conditional sensitivity of biological experiments requires a sufficient number of parallel experiments to support a conclusion. In this work, a microfluidic single cell chip is designed for use with a protein chip to investigate the effect of hydroxyapatite (HAp) on the osteogenic differentiation of human adipose-derived stem cells (hADSCs) in situ at the single cell level. By successfully detecting secretory proteins in situ, it is found that the HAp nanorods enhance osteogenic differentiation at the single cell level. In the chip, the single cell seeding approach confirms the osteogenic differentiation of the hADSCs, which endocytoses HAp, by reducing the influence of the factors secreted by neighboring differentiating cells. Most importantly, more than 7000 microchambers provide a sufficient number of parallel experiments for statistical analysis, which ensure a high level of repeatability of the HAp nanorod-induced osteogenic differentiation. The microfluidic chip comprising single cell culture microchambers with in situ detection capability is a promising tool for research on cell behavior or cell fate at the single cell level.

Rare-earth (Gd3+,Yb3+/Tm3+, Eu3+) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging

Taking advantage of the flexibility of the apatite structure, nano- and micro-particles of hydroxyapatite (HAp) were doped with different combinations of rare earth ions (RE³⁺ = Gd, Eu, Yb, Tm) to achieve a synergy among their magnetic and optical properties and to enable their application in preventive medicine, particularly diagnostics based on multimodal imaging. All powders were synthesized through hydrothermal processing at T ≤ 200 °C. An X-ray powder diffraction analysis showed that all powders crystallized in P6₃/m space group of the hexagonal crystal structure. The refined unit-cell parameters reflected a decrease in the unit cell volume as a result of the partial substitution of Ca²⁺ with smaller RE³⁺ ions at both cation positions. The FTIR analysis additionally suggested that a synergy may exist solely in the triply doped system, where the lattice symmetry and vibration modes become more coherent than in the singly or doubly doped systems. HAp:RE³⁺ optical characterization revealed a change in the energy band gap and the appearance of a weak blue luminescence (λ_ex = 370 nm) due to an increased concentration of defects. The "up"- and the "down"-conversion spectra of HAp:Gd/Yb/Tm and HAp:Gd/Eu powders showed characteristic transitions of Tm³⁺ and Eu³⁺, respectively. Furthermore, in contrast to diamagnetic HAp, all HAp:RE³⁺ powders exhibited paramagnetic behavior. Cell viability tests of HAp:Gd/Yb/Tm and HAp:Gd/Eu powders in human dental pulp stem cell cultures indicated their good biocompatibility.

Calcium phosphate nanocarriers for drug delivery to tumors: imaging, therapy and theranostics

Calcium phosphate (CaP) was engineered as a drug delivery nanocarrier nearly 50 years ago due to its biocompatibility and biodegradability. In recent years, several approaches have been developed for the preparation of size-controllable, stable and multifunctional CaP nanocarriers, and several targeting moieties have also been decorated on the surface of these nanocarriers for active targeting. The CaP nanocarriers have been utilized for loading probes, nucleic acids, anticancer drugs and photosensitizers for cancer imaging, therapy and theranostics. Herein, we reviewed the recent advances in the preparation strategies of CaP nanocarriers and the applications of these nanocarriers in tumor diagnosis, gene delivery, drug delivery and theranostics and finally provided perspectives.

Thermally Modified Iron-Inserted Calcium Phosphate for Magnetic Hyperthermia in an Acceptable Alternating Magnetic Field

Magnetic hyperthermia treatment using calcium phosphate nanoparticles is an evolutionary choice because of its excellent biocompatibility. In the present work, Fe³⁺ is incorporated into HAp nanoparticles by thermal treatment at various temperatures. Induction heating was examined within the threshold H f value of 4.58 × 10⁶ kA m^-1 s^-1 (H is the strength of alternating magnetic field and f is the operating frequency) and sample concentration of 10 mg/mL. The temperature-dependent structural modifications are well correlated with the morphological, surface charge, and magnetic properties. Surface charge changes from +10 mV to -11 mV upon sintering because of the diffusion of iron in the HAp lattice. The saturation magnetization has been achieved by sintering the nanoparticles at 400 and 600 °C, which has led to the specific absorption rate of 12.2 and 37.2 W/g, respectively. Achievement of the hyperthermia temperature (42 °C) within 4 min is significant when compared with the existing magnetic calcium phosphate nanoparticles. The systematic investigation reveals that the HAp nanoparticles partially stabilized with FeOOH and biocompatible α-Fe₂O₃ exhibit excellent induction heating. In vitro tests confirmed the samples are highly hemocompatible. The importance of the present work lies in HAp nanoparticles exhibiting induction heating without compromising the factors such as H f value, low sample concentration, and reduced duration of applied field.