Microfabrication of proangiogenic cell-Laden alginate-g-Pyrrole hydrogels

The Chicken Embryo Chorioallantoic Membrane as an In Vivo Model for Photodynamic Therapy

For many decades the chicken embryo chorioallantoic membrane (CAM) has been used for research as an in vivo model in a large number of different fields, including toxicology, bioengineering, and cancer research. More specifically, the CAM is also a suitable and convenient model system in the field of photodynamic therapy (PDT), mainly due to the easy access of its membrane and the possibility of grafting or growing tumors on the membrane and, interestingly, to study the PDT effects on its dense vascular network. In addition, the CAM is simple to handle and cheap. Since the CAM is not innervated until later stages of the embryo development, its use in research is simplified compared to other in vivo models as far as ethical and regulatory issues are concerned. In this review different incubation and drug administration protocols of relevance for PDT are presented. Moreover, data regarding the propagation of light at different wavelengths and CAM development stages are provided. Finally, the effects induced by photobiomodulation on the CAM angiogenesis and its impact on PDT treatment outcome are discussed.

The use of the chick embryo CAM assay in the study of angiogenic activiy of biomaterials

The chick embryo chorioallantoic membrane (CAM) is a highly vascularized extraembryonic membrane, which carries out several functions during embryonic development, including exchange of respiratory gases, calcium transport from the eggshell, acid-base homeostasis in the embryo, and ion and water reabsorption from the allantoic fluid. Due to its easy accessibility, affordability and given that it constitutes an immunodeficient environment, CAM has been used as an experimental model for >50 years and in particular it has been broadly used to study angiogenesis and anti-angiogenesis. This review article describes the use of the CAM assay as a valuable assay to test angiogenic activity of biomaterials in vivo before they are further investigated in animal models. In this context, the use of CAM has become an integral part of the biocompatibility testing process for developing potential biomaterials.

Layered PEGDA hydrogel for islet of Langerhans encapsulation and improvement of vascularization

Islets of Langerhans need to maintain their round morphology and to be fast revascularized after transplantation to preserve functional insulin secretion in response to glucose stimulation. For this purpose, a non-cell-adhesive environment is preferable for their embedding. Conversely, nutrient and oxygen supply to islets is guaranteed by capillary ingrowth within the construct and this can only be achieved in a matrix that provides adhesion cues for cells. In this study, two different approaches are explored, which are both based on a layered architecture, in order to combine these two opposite requirements. A non-adhesive islet encapsulation layer is based on polyethyleneglycole diacrylate (PEGDA). This first layer is combined with a second hydrogel based on thiolated-gelatin, thiolated-heparin and thiolated-hyaluronic acid providing cues for endothelial cell adhesion and acting as a growth factor releasing matrix. In an alternative approach, a conformal PEGDA coating is covalently applied on the surface of the islets. The coated islets are subsequently embedded in the previously mentioned hydrogel containing thiolated glycosaminoglycans. The suitability of this approach as a matrix for controlled growth factor release has been demonstrated by studying the controlled release of VEGF and bFGF for 14 days. Preliminary tube formation has been quantified on the growth factor loaded hydrogels. This approach should facilitate blood vessel ingrowth towards the embedded islets and maintain islet round morphology and functionality upon implantation.

Proangiogenic alginate-g-pyrrole hydrogel with decoupled control of mechanical rigidity and electrically conductivity

Background

An electrically conductive hydrogel has emerged to regulate cellular secretion activities with electrical stimulation. However, the electrical conductivity of typical hydrogel systems decreases with increasing elastic modulus of the hydrogels because of decreased transport of ions through a polymeric cross-linked mesh.

Method

This study hypothesized that the inverse dependency between electrical conductivity and elastic modulus would be made through the cross-linking of conductive monomer-units conjugated to a hydrophilic polymeric backbone. This hypothesis was examined through the cross-linking of pyrrole groups that were conjugated to an alginate backbone, termed alginate-g-pyrrole.

Results

Hydrogels with increased degrees of pyrrole substitution exhibited a simultaneous increase in the gels mechanical rigidity and electrical conductivity. The resulting hydrogel could control the adhesion and vascular endothelial growth factor secretion of cells via applied electrical stimulation.

Conclusions

This material design principle will be broadly useful to fabricating materials used for various actuation, cell culture, and biomedical applications.

Electronic supplementary material

The online version of this article (10.1186/s40824-017-0110-x) contains supplementary material, which is available to authorized users.

The chorioallantoic membrane (CAM) assay for the study of human bone regeneration: a refinement animal model for tissue engineering

Biomaterial development for tissue engineering applications is rapidly increasing but necessitates efficacy and safety testing prior to clinical application. Current in vitro and in vivo models hold a number of limitations, including expense, lack of correlation between animal models and human outcomes and the need to perform invasive procedures on animals; hence requiring new predictive screening methods. In the present study we tested the hypothesis that the chick embryo chorioallantoic membrane (CAM) can be used as a bioreactor to culture and study the regeneration of human living bone. We extracted bone cylinders from human femoral heads, simulated an injury using a drill-hole defect, and implanted the bone on CAM or in vitro control-culture. Micro-computed tomography (μCT) was used to quantify the magnitude and location of bone volume changes followed by histological analyses to assess bone repair. CAM blood vessels were observed to infiltrate the human bone cylinder and maintain human cell viability. Histological evaluation revealed extensive extracellular matrix deposition in proximity to endochondral condensations (Sox9+) on the CAM-implanted bone cylinders, correlating with a significant increase in bone volume by μCT analysis (p < 0.01). This human-avian system offers a simple refinement model for animal research and a step towards a humanized in vivo model for tissue engineering.

Hybrid Polycaprolactone/Alginate Scaffolds Functionalized with VEGF to Promote de Novo Vessel Formation for the Transplantation of Islets of Langerhans

Although regarded as a promising treatment for type 1 diabetes, clinical islet transplantation in the portal vein is still hindered by a low transplantation outcome. Alternative transplantation sites have been proposed, but the survival of extra-hepatically transplanted islets of Langerhans critically depends on quick revascularization after engraftment. This study aims at developing a new 3D scaffold platform that can actively boost vascularization and may find an application for extra-hepatic islet transplantation. The construct consists of a 3D ring-shaped polycaprolactone (PCL) scaffold with heparinized surface to electrostatically bind vascular endothelial growth factor (VEGF), surrounding a hydrogel core for islets encapsulation. Heparin immobilization improves the amount of VEGF retained by the construct, up to 3.6 fold, compared to untreated PCL scaffolds. In a chicken chorioallanthoic membrane model, VEGF immobilized on the construct enhances angiogenesis in close proximity and on the surface of the scaffolds. After 7 days, islets encapsulated in the alginate core show functional response to glucose stimuli comparable to free-floating islets. Thus, the developed platform has the potential to support rapid vascularization and islet endocrine function.

Biofabrication Using Pyrrole Electropolymerization for the Immobilization of Glucose Oxidase and Lactate Oxidase on Implanted Microfabricated Biotransducers

The dual responsive Electrochemical Cell-on-a-Chip Microdisc Electrode Array (ECC MDEA 5037) is a recently developed electrochemical transducer for use in a wireless, implantable biosensor system for the continuous measurement of interstitial glucose and lactate. Fabrication of the biorecognition membrane via pyrrole electropolymerization and both in vitro and in vivo characterization of the resulting biotransducer is described. The influence of EDC-NHS covalent conjugation of glucose oxidase with 4-(3-pyrrolyl) butyric acid (monomerization) and with 4-sulfobenzoic acid (sulfonization) on biosensor performance was examined. As the extent of enzyme conjugation was increased sensitivity decreased for monomerized enzymes but increased for sulfonized enzymes. Implanted biotransducers were examined in a Sprague-Dawley rat hemorrhage model. Resection after 4 h and subsequent in vitro re-characterization showed a decreased sensitivity from 0.68 (±0.40) to 0.22 (±0.17) µA·cm^-2·mM^-1, an increase in the limit of detection from 0.05 (±0.03) to 0.27 (±0.27) mM and a six-fold increase in the response time from 41 (±18) to 244 (±193) s. This evidence reconfirms the importance of biofouling at the bio-abio interface and the need for mitigation strategies to address the foreign body response.

A slowly reabsorbed, echogenic surgical thread provides a long-lasting ultrasound-detectable marker of grafted ovarian tissue

This communication reports a novel technical solution for the orthotopic transplant of cryostored-thawed ovarian tissue. The described technique was applied to three young women with iatrogenic ovarian failure. An echogenic thread that is reabsorbed after 6 months was used to fasten the thawed ovarian small fragments before grafting them onto the atrophic ovary. This technical solution made it possible to avoid the loss of small tissue pieces during laparoscopic grafting as well as to precisely localize the grafted tissue by transvaginal ultrasound during the following months. The precise localization of the grafted tissue was particularly helpful when its revascularization and functional recovery were followed up using, respectively, colour Doppler and transvaginal follicle growth examination. In conclusion, the use of a slowly reabsorbed, ultrasound-detectable surgical thread as an ultrasound-detectable marker able to improve the localization of the exact site at which ovarian tissue was grafted is proposed.

Alginate-based strategies for therapeutic vascularization

Therapeutic stimulation of vessel growth to improve tissue perfusion has shown promise in many regenerative medicine and tissue engineering applications. Alginate-based biomaterial systems have been investigated for growth factor and/or cell delivery as tools for modulating vessel assembly. Growth factor encapsulation allows for a sustained release of protein and protection from degradation. Implantation of growth factor-loaded alginate constructs typically shows an increase in capillary density but without vascular stabilization. Delivery of multiple factors may improve these outcomes. Cell delivery approaches focus on stimulating vascularization either via cell release of soluble factors, cell proliferation and incorporation into new vessels or alginate prevascularization prior to implantation. These methods have shown some promise but routine clinical application has not been achieved. In this review, current research on the application of alginate for therapeutic neovascularization is presented, shortcomings are addressed and the future direction of these systems discussed.