A chitosan thermogel for delivery of ropivacaine in regional musculoskeletal anesthesia

Local anesthetic delivery systems for the management of postoperative pain

Postoperative pain (POP) is a major clinical challenge. Local anesthetics (LAs), including amide-type LAs, ester-type LAs, and other potential ion-channel blockers, are emerging as drugs for POP management because of their effectiveness and affordability. However, LAs typically exhibit short durations of action and prolonging the duration by increasing their dosage or concentration may increase the risk of motor block or systemic local anesthetic toxicity. In addition, techniques using LAs, such as intrathecal infusion, require professional operation and are prone to catheter displacement, dislodgement, infection, and nerve damage. With the development of materials science and nanotechnology, various LAs delivery systems have been developed to compensate for these disadvantages. Numerous delivery systems have been designed to continuously release a safe dose in a single administration to ensure minimal systemic toxicity and prolong pain relief. LAs delivery systems can also be designed to control the duration and intensity of analgesia according to changes in the external trigger conditions, achieve on-demand analgesia, and significantly improve pain relief and patient satisfaction. In this review, we summarize POP pathways, animal models and methods for POP testing, and highlight LAs delivery systems for POP management. STATEMENT OF SIGNIFICANCE: Postoperative pain (POP) is a major clinical challenge. Local anesthetics (LAs) are emerging as drugs for POP management because of their effectiveness and affordability. However, they exhibit short durations and toxicity. Various LAs delivery systems have been developed to compensate for these disadvantages. They have been designed to continuously release a safe dose in a single administration to ensure minimal toxicity and prolong pain relief. LAs delivery systems can also be designed to control the duration and intensity of analgesia to achieve on-demand analgesia, and significantly improve pain relief and patient satisfaction. In this paper, we summarize POP pathways, animal models, and methods for POP testing and highlight LAs delivery systems for POP management.

Construction of bupivacaine-loaded gelatin-based hydrogel delivery system for sciatic nerve block in mice

Peripheral nerve blockade (PNB) is a common treatment to relieve postoperative pain. However, local anesthetics alone have a short duration of action and severe side effects during postoperative analgesia. In order to overcome these limitations, the present study reported an injectable hydrogel with a drug slow-release profile for regional nerve blockade. The injectable hydrogel was prepared by crosslinking with gelatin and NHS-PEG-NHS, which was degradable in the physiological environment and displayed sustainable release of anesthetics locally, thus improving the disadvantage of the high toxicity of local anesthetics. In this regard, we conducted a series of in vitro characterizations and proved that the hydrogel has a porous three-dimensional mesh structure with high drug loading capability, and sustainable drug release profile. And cytotoxicity experiments confirmed the good biocompatibility of the hydrogel. It was shown that using the animal sciatic nerve block model, the analgesic effect was greatly improved in vivo, and there was no obvious evidence of permanent inflammation or nerve damage in the block site's sections. This locally slow-release platform, combined with local anesthetics, is therefore a promising contender for long-acting analgesia.

Sustained release local anesthetics for pain management: relevance and formulation approaches

This review attempted to ascertain the rationale for the formulation of sustained-release local anesthetics and summarize the various formulation approaches designed to date to achieve sustained and localized local analgesic effects. The incidence of pain, which is the concern of patients as well as health care professionals, is increasing due to accidents, surgical procedures, and other diseases. Local anesthetics can be used for the management of moderate to severe acute and chronic pain. They also allow regional analgesia, in situations where the cause and source of the pain are limited to a particular site or region, without the need for loss of consciousness or systemic administration of other analgesics thereby decreasing the risk of potential toxicities. Though they have an interesting antipain efficacy, the short duration of action of local anesthetics makes the need for their multiple injections or opioid adjuvants mandatory. To overcome this problem, different formulations are being designed that help achieve prolonged analgesia with a single dose of administration. Combination with adjuvants, liposomal formulations, lipid-based nanoparticles, thermo-responsive nanogels, microspheres, microcapsules, complexation with multivalent counterions and HP-β-CD, lipid-based nanoparticles, and bio-adhesive films, and polymeric matrices are among the approaches. Further safety studies are required to ensure the safe and effective utilization of sustained-release local anesthetics. Moreover, the release kinetics of the various formulations should be adequately established.

MOF-Thermogel Composites for Differentiated and Sustained Dual Drug Delivery

In recent years, multidrug therapy has gained increasing popularity due to the possibility of achieving synergistic drug action and sequential delivery of different medical payloads for enhanced treatment efficacy. While a number of composite material release platforms have been developed, few combine the bottom-up design versatility of metal-organic frameworks (MOFs) to tailor drug release behavior, with the convenience of temperature-responsive hydrogels (or thermogels) in their unique ease of administration and formulation. Yet, despite their potential, MOF-thermogel composites have been largely overlooked for simultaneous multidrug delivery. Herein, we report the first systematic study of common MOFs (UiO-66, MIL-53(Al), MIL-100(Fe), and MOF-808) with different pore sizes, geometries, and hydrophobicities for their ability to achieve simultaneous dual drug release when embedded within PEG-containing thermogel matrices. After establishing that MOFs exert small influences on the rheological properties of the thermogels despite the penetration of polymers into the MOF pores in solution, the release profiles of ibuprofen and caffeine as model hydrophobic and hydrophilic drugs, respectively, from MOF-thermogel composites were investigated. Through these studies, we elucidated the important role of hydrophobic matching between MOF pores and loaded drugs in order for the MOF component to distinctly influence drug release kinetics. These findings enabled us to identify a viable MOF-thermogel composite containing UiO-66 that showed vastly different release kinetics between ibuprofen and caffeine, enabling temporally differentiated yet sustained simultaneous drug release to be achieved. Finally, the MOF-thermogel composites were shown to be noncytotoxic in vitro, paving the way for these underexploited composite materials to find possible clinical applications for multidrug therapy.

Achieving Long-Acting Local Analgesia Using an Intelligent Hydrogel Encapsulated with Drug and pH Regulator

Local anesthetics are important for the treatment of postoperative pain. Since a single injection of the solution of a drug such as bupivacaine (BUP) works only for a few hours, it is much required to develop a long-term injectable formulation that maintains its efficacy for more than 1 day. Herein, an intelligent copolymer hydrogel loaded with BUP microcrystals was invented. The biodegradable block copolymer was synthesized by us and composed of a central hydrophilic poly(ethylene glycol) (PEG) block and two hydrophobic poly(lactide-co-glycolide) (PLGA) blocks. The aqueous system of the amphiphilic copolymer underwent a sol-gel transition between room temperature and body temperature and, thus, physically gelled after injection. Considering the decrease of solubility of BUP with the increase of pH and the internal acidic environment due to the hydrolysis of PLGA, calcium carbonate (CaCO3) powder was introduced as a pH regulator. Then, the internal pH was found to be nearly neutral and many BUP microcrystals were dispersed in the gel network. In this way, BUP had achieved a sustained release out of the thermogel. The maximum possible effect (MPE) in a rat sciatic nerve blockade model was used to describe the sensory blockade effect. In vivo analgesic effects evaluated with a hot plate experiment of rats demonstrated that the thermogel encapsulated with BUP microcrystal and CaCO3 powder significantly prolonged analgesia up to 44 h, the duration time with respect to 50% MPE. The intramuscularly injected implant exhibited biocompatibility in histological analyses. Besides, the untreated leg of the rats was not influenced by the treated leg, indicating no obvious systematic anesthesia of this hydrogel formulation. Such an intelligent and composite formulation represents a potential strategy for long-acting analgesia therapy.

Nanomaterial-Based Drug Delivery Systems for Pain Treatment and Relief: From the Delivery of a Single Drug to Co-Delivery of Multiple Therapeutics

The use of nanomaterials in drug delivery systems for pain treatment is becoming increasingly common. This review aims to summarize how nanomaterial-based drug delivery systems can be used to effectively treat and relieve pain, whether via the delivery of a single drug or a combination of multiple therapeutics. By utilizing nanoformulations, the solubility of analgesics can be increased. Meanwhile, controlled drug release and targeted delivery can be realized. These not only improve the pharmacokinetics and biodistribution of analgesics but also lead to improved pain relief effects with fewer side effects. Additionally, combination therapy is frequently applied to anesthesia and analgesia. The co-encapsulation of multiple therapeutics into a single nanoformulation for drug co-delivery has garnered significant interest. Numerous approaches using nanoformulation-based combination therapy have been developed and evaluated for pain management. These methods offer prolonged analgesic effects and reduced administration frequency by harnessing the synergy and co-action of multiple targets. However, it is important to note that these nanomaterial-based pain treatment methods are still in the exploratory stage and require further research to be effectively translated into clinical practice.

Preparation of Ropivacaine Encapsulated by Zeolite Imidazole Framework Microspheres as Sustained-Release System and Efficacy Evaluation

The management of persistent postoperative pain still remains a clinical challenge currently. Although ropivacaine (RVC) is widely used for postoperative analgesia as a local anesthetic, the short half-life makes it difficult to achieve the desired duration of analgesia. Herein, a RVC sustained-release microspheres encapsulated by zeolite imidazole framework-8 (RVC@ZIF-8) was synthesized for the first time, which prolonged the sustained-release of RVC and decreased the resulting drug toxicity. RVC can continuously release in vitro for at least 96 h with high drug loading of 30.6 % and RVC@ZIF-8 had excellent biocompatibility and low cytotoxicity. In sciatic nerve block model, the sensory block time of RVC@ZIF-8 was significantly prolonged compared with RVC, achieving more than 72 h post injection and no inflammation or lesion were found. Based on high drug loading, ideal sustained-release and superior biological safety, RVC@ZIF-8 will be a novel delivery material for local anesthetic with potential application.

Interaction Between Ropivacaine and a Self-Assembling Peptide: A Nanoformulation for Long-Acting Analgesia

Introduction

Methods

Results

Conclusion

Injectable electrospun fiber-hydrogel composite sequentially releasing clonidine and ropivacaine for prolonged and walking regional analgesia

Rationale: Peripheral nerve block is a traditional perioperative analgesic method for its precise pain control and low systemic toxicity. However, a single low dose of local anesthetic merely provides a few hours of analgesia, and high dose results in irreversible toxicity, whereas continuous infusion of anesthetics is expensive and complicated. Therefore, it is necessary to develop a long-acting and sensory-selective local anesthetic for safe perioperative analgesia. Methods: An injectable composite comprising ropivacaine-loaded poly (ε-caprolactone) electrospun fiber and clonidine-loaded F127 hydrogel (Fiber-Rop/Gel-Clo composite) was developed for long-acting and walking regional analgesia with barely one dose. The peripheral nerve blockade effect of the composite was evaluated in a rat sciatic nerve block model. Also, the biodegradability and biosafety of the composite was evaluated. Results: The preferentially released Clo from the hydrogel rapidly constricted the peripheral arterial vessels, reducing the blood absorption of Rop and thus enhancing the local Rop accumulation at the injection site. The subsequently sustainable release of Rop from the fiber, significantly prolonged the sciatic nerve block of rats. Remarkably, an amazing sensorimotor segregation effect was achieved, as the sensory blockade (32.0 ± 1.4 h) lasted significantly longer than the motor blockade (20.3 ± 0.9 h). Additionally, the Fiber-Rop/Gel-Clo composite presented good biodegradability and biosafety in vivo. Conclusions: Our designed Fiber-Rop/Gel-Clo composite with minimal invasion, prolonged synergistic analgesia, and strikingly sensorimotor segregation effect, posted a promising prospect for regional long-term walking analgesia in clinical treatment.

Ropivacaine-loaded, hydroxypropyl chitin thermo-sensitive hydrogel combined with hyaluronan: an injectable, sustained-release system for providing long-lasting local anesthesia in rats

BACKGROUND AND OBJECTIVE

Ropivacaine hydrochloride is a commonly used local anesthetic in clinics. However, local injection or continuous infusion of ropivacaine has been associated with several disadvantages. Accordingly, it is important to develop a new controlled release system for local administration of ropivacaine to achieve a prolong anesthetic effect, improve efficacy, and minimize the side effects.

METHODS

We developed injectable hydroxypropyl chitin thermo-sensitive hydrogel (HPCH) combined with hyaluronan (HA), which was used to synthesize a ropivacaine (R)-loaded controlled release system. We then conducted drug release test and cytotoxicity assay in vitro. Importantly, we examined the analgesic effects and biocompatibility of this system in vivo by injecting different concentrations of R-HPCH-HA (7.5, 15, 22.5 mg/mL), ropivacaine hydrochloride (R_HCL, 7.5 mg/mL), or saline (all in 0.5 mL) near the sciatic nerve in rats.

RESULTS

R-HPCH-HA induced concentration-dependent thermal-sensory blockade and motor blockade in vivo. In hot plate test, R-HPCH-HA (22.5 mg/mL) induced a significant longer thermal-sensory blockade (17.7±0.7 hours), as compared with R_HCL (7.5 mg/mL, 5.7±0.8 hours, n=6/group, p<0.05). It also produced a more prolonged motor blockade (6.8±0.8 hours) than R_HCL (3.5±0.8 hours, p<0.05). R-HPCH-HA caused less cytotoxicity than R_HCL, as indicated by the higher cell viability in vitro (n=8/group).

CONCLUSION

Our findings in a sciatic nerve block model demonstrated that the injectable, ropivacaine-loaded controlled release system effectively prolonged the local analgesic effect in rats without notable side effects.

Synthesis of nanocapsules blended polymeric hydrogel loaded with bupivacaine drug delivery system for local anesthetics and pain management

Local anesthetics are used clinically for the control of postoperative pain management. This study aimed to develop chitosan (CS) with genipin (GP) hydrogels as the hydrophilic lipid shell loaded poly(ε-caprolactone) (PC) nanocapsules as the hydrophobic polymeric core composites (CS-GP/PC) to deliver bupivacaine (BPV) for the prolongation of anesthesia and pain relief. The swelling ratio, in vitro degradation, and rheological properties enhancement of CS-GP/PC polymeric hydrogel. The incorporation of PC nanocapsules into CS-GP hydrogels was confirmed by SEM, FTIR, and XRD analysis. Scanning electron microscopy results demonstrated that the CS-GP hydrogels and CS-GP/PC polymeric hydrogels have a porous structure, the pore dimensions being non-uniform with diameters between 25 and 300 μm. The in vitro drug release profile of CS-GP/PC polymeric hydrogel has been achieved 99.2 ± 1.12% of BPV drug release in 36 h. Cellular viability was evaluated using the CCK-8 test on 3T3 fibroblast cells revealed that the obtained CS-GP/PC polymeric hydrogel with BPV exhibited no obvious cytotoxicity. The CS-GP/PC polymeric hydrogel loaded with BPV showed significant improvement in pain response compared to the control group animals for at least 7 days. When compared with BPV solution, CS-GP hydrogel and CS-GP/PC polymeric hydrogel improved the skin permeation of BPV 3-fold and 5-fold in 24 h, respectively. In vitro and in vivo results pointed out PC nanocapsules loaded CS-GP hydrogel can act as effective drug carriers, thus prolonging and enhancing the anesthetic effect of BPV. Histopathological results demonstrated the excellent biodegradability and biocompatibility of the BPV-loaded CS-GP/PC polymeric hydrogel system on 7, 14, and 21 days without neurotoxicity.

HIGHLIGHTS

Preparation and characterization of CS-GP/PC polymeric hydrogel system.

BPV-loaded CS-GP/PC exhibited prolonged in vitro release in PBS solution.

Cytotoxicity of BPV-loaded CS-GP/PC polymeric hydrogel against fibroblast (3T3) cells.

Development of CS-GP/PC a promising skin drug-delivery system for local anesthetic BPV.

Development of local anesthetic drug delivery system by administration of organo-silica nanoformulations under ultrasound stimuli: in vitro and in vivo investigations

The development of local anesthetic (LA) system is the application of commercial drug for the pain management that indorses the reversible obstructive mechanism of neural transmission through preventing the innervation process in human peripheral nerves. Ropivacaine (RV) is one of the greatest frequently used LA s with the actions of long-lasting and low-toxicity for the post-operative pain management. In this work, we have approached novel design and development of glycosylated chitosan (GCS) encapsulated mesoporous silica nanoparticles (GCS-MONPs)-based nano-scaffold for sustainable distributions and controlled/supported arrival of stacked RV for targeting sites, which can be activated by either outer ultrasound activating to discharge the payload, foundation on-request and dependable analgesia. The structural and morphology analyses result established that prepared nano-formulations have successful molecular interactions and RV loaded spherical morphological structures. The drug release profile of developed nanostructure with ultrasound-activation has been achieved 50% of drug release in 2 h and 90% of drug release was achieved in 12 h, which displays more controlled release when compared to free RV solution. The in vitro cell compatibility analysis exhibited GCS-MONPs with RV has improved neuron cell survival rates when compared to other samples due to its porous surface and suitable biopolymer proportions. The analysis of ex vitro and in vivo pain relief analysis demonstrated treated animal models have high compatibility with GCS-MONPs@RV, which was confirmed by histomorphology. This developed MONPs based formulations with ultrasound-irradiation gives a prospective technique to clinical agony the board through on-request and dependable help with discomfort.

Near-infrared triggered on-demand local anesthesia using a jammed microgels system

To conveniently modulate the degree of local analgesia in response to changes in patients' needs and level of activity, a NIR-activated drug delivery system based on jammed microgels was introduced in the present study to realize on-demand local anesthesia. Chemically cross-linked gelatin microgels (5-15 μm) containing N-isopropylacrylamide (NIPAM), methylallyl polyethylene glycol (APEG) and graphene oxide (GOs) were fabricated through emulsion. After the in situ free radical polymerization, the physical network was formed, producing microgels with double networks (DN microgels). The DN microgels exhibited thermosensitive properties. The copolymerization of APEG resulted in the increase of lower critical solution temperature (LCST) of microgels. The maximum volume shrinkage ratio of DN microgels (NIPAM40 + APEG60) increased with the increase of the content of physical cross-linking network. The DN microgels also exhibited NIR-responsive ability. Under the NIR irradiance of 272 mW/cm², the temperature of DN microgels with 3 mg/mL GOs reached 40 °C within 60 s, resulting in the volume shrinkage of 14%. Ropivacaine release from DN microgels could be effectively triggered by NIR irradiation in vitro. After centrifugation, a jammed microgels system was produced where microgels packed densely, displaying shear-thinning behavior for achieving injection. The jammed DN microgels carrying ropivacaine were injected subcutaneously into rat footpad. NIR irradiation produced on-demand and repeated infiltration anesthesia in the rat footpad. The jammed DN microgels system thus was beneficial in the management of pain.

A Novel Fabrication of Dose-Dependent Injectable Curcumin Biocomposite Hydrogel System Anesthetic Delivery Method for Care and Management of Musculoskeletal Pain

Chronic musculoskeletal pain has biological, psychological, and social components. In this article, we have demonstrated the easily injectable nanocomposite carrier for the treatment of chronic musculoskeletal pain. Briefly, the curcumin (Cur) loaded with lipid nanocapsules (LNCs; Cur@LNCs) using the phase invasion method. The synthesized Cur@LNCs were characterized by using scanning electron microscopy, transmittance electron microscopy, and the size of the fabricated nanoparticles confirmed by dynamic light scattering analysis. The synthesized Cur@LNC injectable hydrogel shows excellent results in vivo in the rat model. We have examined the efficiency of the chronic constriction injury in the rat model and induced the pain using thermal paw withdrawal latency. The injectable hydrogels Cur@LNCs display a remarkable reduction in pain 7 days post administrations compared to the untreated group animals. This work could establish the preclinical candidate of the neuropathic pain response in the future.

In vitro and in vivo studies of micro-depots using tailored microemulsion for sustained local anaesthesia

In clinical practice, lidocaine is used as local anesthetic for the management of post-operative pain. The commercial formulation including gels, injections and ointments showed short duration of action (1 to 2 h). In this paper, the efforts have being made to develop tailored lidocaine-microemulsion (o/w), which on penetration in the skin layer cause micro-depots formation due to destabilization of the microemulsion system. To identify the microemulsion region, pseudo ternary diagrams were constructed using Capmul MCM as oil, Pluronic F68 as tri-block surfactant, polyethylene glycol 200 as co-surfactant at 1:4 and 1:6 ratios (S:Co-S). The selected 5%w/v lidocaine loaded microemulsion [Ld-ME-2(1:4)] was stable in thermodynamic test and during shelf life period (3 months). In ex vivo permeability study, the lidocaine release from Ld-ME-2(1:4) microemulsion was sustained in comparison to the marketed lidocaine ointment. The skin irritation study confirmed the safety of lidocaine loaded microemulsion. Tail flick test showed improved and sustain local anaesthetic effect in comparison to the market ointment. The improved efficacy of microemulsion system, was due to high penetration in the skin layer due to local precipitation of lidocaine from microemulsion. The findings suggest that the tailored microemulsion could be a potential strategy to prolong the local anaesthesia.

Topical anesthetic analgesic therapy using the combination of ropivacaine and dexmedetomidine: hyaluronic acid modified long-acting nanostructured lipid carriers containing a skin penetration enhancer

Purpose

Hyaluronic acid-poly(ethylene glycol)-distearoyl phosphoethanolamine (HA-PEG-DSPE) modified and tocopheryl polyethylene glycol 1000 succinate (TPGS) contained nanostructured lipid carriers (NLCs) were prepared loading ropivacaine and dexmedetomidine to improve the topical anesthetic analgesic anesthesia efficiency.

Methods

NLCs were prepared by the solvent diffusion method. The average particle size, zeta potential, release behavior, and cytotoxicity of the NLCs were tested. Ex vivo skin permeation was studied using a Franz diffusion cell mounted with depilated rat skin. Local anesthesia antinociceptive efficiency was evaluated by rat tail flick latency study in vivo.

Results

NLCs have sizes of about 100 nm, with negative zeta potentials. All the NLCs formulations were found to be significantly less cytotoxic than free drugs at equivalent concentrations. The cumulative amount of drugs penetrated through rat skin from NLCs was 2.0–4.7 folds higher than that of the drugs solution. The in vivo anesthesia antinociception study displayed that NLCs showed stronger and longer anesthesia antinociceptive effect when compared with single drugs loaded NLCs and drugs solution even at a lower dosage of drugs.

Conclusion

The results demonstrated that the HA modified, TPGS contained, dual drugs loaded NLCs could perform a synergistic effect and may reduce the amount of drugs, which can lower the toxicity of the system and at the meanwhile, increase the anesthesia antinociceptive efficiency.

An efficient and long-acting local anesthetic: ropivacaine-loaded lipid-polymer hybrid nanoparticles for the control of pain

Purpose

Local anesthetics are used clinically for the control of pain following operation (including gastrointestinal surgery) or for the management of other acute and chronic pain. This study aimed to develop a kind of lipid-polymer hybrid nanoparticles (LPNs), which were constructed using poly(ethylene glycol)-distearoylphosphatidylethanolamine (PEG-DSPE) as the hydrophilic lipid shell and poly-ε-caprolactone (PCL) as the hydrophobic polymeric core.

Methods

Ropivacaine (RPV) was entrapped in the LPNs (RPV-LPNs) and the physicochemical and biochemical properties such as size, zeta potential, drug release, and cytotoxicity were studied. The long-lasting effects and safety aspects of the LPNs were evaluated in vitro and in vivo.

Results

The particle size and zeta potential of RPV-LPNs were 112.3±2.6 nm and −33.2±3.2 mV, with an entrapment efficiency (EE) of 90.2%±3.7%. Ex vivo permeation efficiency of LPNs was better than the drug solution. The RPV-LPNs exhibited a long-lasting in vivo anesthesia effect in both rats and mice.

Conclusion

Considering the low cytotoxicity, the LPNs prepared here could be used as an efficient local anesthetic for the control of pain.

Injectable nanocomposite analgesic delivery system for musculoskeletal pain management

Musculoskeletal pain is a major health issue which results from surgical procedures (i.e. total knee and/or hip replacements and rotator cuff repairs), as well as from non-surgical conditions (i.e. sympathetically-mediated pain syndrome and occipital neuralgia). Local anesthetics, opioids or corticosteroids are currently used for the pain management of musculoskeletal conditions. Even though local anesthetics are highly preferred, the need for multiple administration presents significant disadvantages. Development of unique delivery systems that can deliver local anesthetics at the injection site for prolonged time could significantly enhance the therapeutic efficacy and patient comfort. The goal of the present study is to evaluate the efficacy of an injectable local anesthetic nanocomposite carrier to provide sustained analgesic effect. The nanocomposite carrier was developed by encapsulating ropivacaine, a local anesthetic, in lipid nanocapsules (LNC-Rop), and incorporating the nanocapsules in enzymatically crosslinked glycol chitosan (0.3GC) hydrogels. Cryo Scanning Electron Microscopic (Cryo SEM) images showed the ability to distribute the LNCs within the hydrogel without adversely affecting their morphology. The study demonstrated the feasibility to achieve sustained release of lipophilic molecules from the nanocomposite carrier in vitro and in vivo. A rat chronic constriction injury (CCI) pain model was used to evaluate the efficacy of the nanocomposite carrier using thermal paw withdrawal latency (TWL). The nanocomposite carriers loaded with ropivacaine and dexamethasone showed significant improvement in pain response compared to the control groups for at least 7 days. The study demonstrated the clinical potential of these nanocomposite carriers for post-operative and neuropathic pain.

STATEMENT OF SIGNIFICANCE

Acute or chronic pain associated with musculoskeletal conditions is considered a major health issue, with healthcare costs totaling several billion dollars. The opioid crisis presents a pressing clinical need to develop alternative and effective approaches to treat musculoskeletal pain. The goal of this study was to develop a long-acting injectable anesthetic formulation which can sustain a local anesthetic effect for a prolonged time. This in turn could increase the quality of life and rehabilitation outcome of patients, and decrease opioid consumption. The developed injectable nanocomposite demonstrated the feasibility to achieve prolonged pain relief in a rat chronic constriction injury (CCI) model.

Precision-guided long-acting analgesia by Gel-immobilized bupivacaine-loaded microsphere

Peripheral nerve blockade (PNB) is a conventional strategy for the management of acute postoperative pain. However, the short duration of the associated analgesia and the potential systemic toxicity due to the low molecular weights of local anesthetics limit their application. Methods: An in situ forming injectable Gel-microsphere (Gel-MS) system consisting of PLGA-PEG-PLGA Gel (Gel) and Gel-immobilized bupivacaine-loaded microsphere (MS/BUP) was prepared for precision-guided long-acting analgesia. A series of in vitro characterizations, such as scanning electron microscopy, rheology analysis, confocal laser scanning microscopy, drug release, and erosion and degradation, were carried out. After that, the in vivo analgesia effect of the Gel-MS system, the immobilization effect of Gel on the MS, and biocompatibility of the system were evaluated using a sciatic nerve block model. Results: The BUP release from the Gel-MS system was regulated by both the inner MS and the outer Gel matrix, demonstrating sustained BUP release in vitro for several days without an initial burst release. More importantly, incorporation of the Gel immobilized the MS and hindered the diffusion of MS from the injection site because of its in situ property, which contributed to a high local drug concentration and prevented systemic side effects. In vivo, a single injection of Gel-MS/BUP allowed rats to maintain sensory and motor blockade significantly longer than treatment with MS/BUP (P < 0.01) or BUP-loaded Gel (Gel-BUP, P < 0.01). Histopathological results demonstrated the excellent biodegradability and biocompatibility of the Gel-MS system without neurotoxicity. Conclusion: This precision-guided long-acting analgesia, which provides an in situ and sustained release of BUP, is a promising strategy for long-acting analgesia, and could represent a potential alternative for clinical pain management.

Thermogelling 3D Systems towards Stem Cell-Based Tissue Regeneration Therapies

Stem cell culturing and differentiation is a very important research direction for tissue engineering. Thermogels are well suited for encapsulating cells because of their non-biotoxic nature and mild sol-gel transition as temperature increases. In particular, thermogels provide a 3D growth environment for stem cell growth, which is more similar to the extracellular matrix than flat substrates, so thermogels as a medium can overcome many of the cell abnormalities caused by 2D cell growth. In this review, we summarize the applications of thermogels in cell and stem cell culture in recent years. We also elaborate on the methods to induce stem cell differentiation by using thermogel-based 3D scaffolds. In particular, thermogels, encapsulating specific differentiation-inducing factor and having specific structures and moduli, can induce the differentiation into the desired tissue cells. Three dimensional thermogel scaffolds that control the growth and differentiation of cells will undoubtedly have a bright future in regenerative medicine.

Local anaesthetic pain relief therapy: In vitro and in vivo evaluation of a nanotechnological formulation co-loaded with ropivacaine and dexamethasone

Combination therapy is frequently applied to anesthesia and analgesia for its benefits, which includes prolonged analgesia following peripheral nerve blockade, and reduced side effects. The aim of this study was to develop chitosan (CH) coated poly(ε-caprolactone) (PCL) nanoparticles to co-deliver ropivacaine (RPV) and dexamethasone (DEM) (RPV/DEM CH-PCL NPs) for the prolongation of anesthesia and pain relief. In the present study, RPV/DEM CH-PCL NPs were fabricated. The properties of CH-PCL NPs were evaluated for their particle sizes, zeta potential, drug loading capacity and in vitro drug release profile. In vitro skin permeation and in vivo therapeutic effect in an animal model were further investigated. The results showed that the NPs was around 190nm, with PDI of less than 0.20. The zeta potentials of NPs were about 36mV. In vitro drug release of both RPV and DEM from NPs complied with sustained behaviors. All of the drugs loaded NPs samples studied exhibited no obvious L929 cells cytotoxicity. In vitro skin penetration profiles showed the amount of RPV permeated through the skin from NPs was significantly higher than free RPV. RPV and DEM co-loaded NPs induced remarkably better anesthetic effect than non DEM loaded RPV CH-PCL NPs. The results suggested that adding a small dosage of DEM could improve the anesthesia efficacy of RVP to a large content. The resulting formulation could be applied as a promising anesthesia system for local anesthetics therapy.

Current progress and challenges of nanoparticle-based therapeutics in pain management

Pain is a widespread and growing health problem worldwide that exerts a considerable social and economic impact on both patients and healthcare systems and, therefore, on society in general. Although current treatment modalities include a wide variety of pharmacological and non-pharmacological approaches, due to the complexity of pain and individual differences in clinical response these options are not always effective in mitigating and relieving pain. In addition, some pain drugs such as non-steroidal anti-inflammatory drugs (NSAIDs), local anesthetics and opioids show several unfavorable side effects. Therefore, current research advances in this medical field are based on the development of potential treatments to address many of the unmet needs and to overcome the existing limitations in pain management. Nanoparticle drug delivery systems present an exciting opportunity as alternative platforms to improve efficacy and safety of medications currently in use. Herein, we review a broad range of nanoparticle formulations (organic nanostructures and inorganic nanoparticles), which have been developed to encapsulate an array of painkillers, paying special attention to the key advantages that these systems offer, (compared to the use of the free drug), as well as to the more relevant results of preclinical studies in animal models. Additionally, we will briefly discuss the impact of some of these nanoformulations in clinical trials.

The effect of two drug delivery systems in ropivacaine cytotoxicity and cytokine release by human keratinocytes and fibroblasts

Objectives

Modified drug delivery systems have been developed to improve pharmacological properties of local anaesthetics. However, the inflammatory potential of these formulations was not investigated. This study compared the in-vitro effects of ropivacaine (ropi) in plain, liposomal (MLV) or 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) formulations on cell viability, apoptosis and cytokine (IL-1α, TNF-α, IL-6 and IL-10) release.

Methods

Human immortalized keratinocytes (HaCaT) and human immortalized gingival fibroblasts (HGF) were exposed to 1–100 μm ropi concentrations. The cell viability was measured by XTT and LIVE/DEAD assay. Apoptosis was performed by flow cytometry, and cytokine release was measured by ELISA assay.

Key findings

Human immortalized keratinocyte viability was reduced by ropi and both drug delivery systems. However, none of the formulations induced apoptosis. Results showed a differential regulation of IL-1α TNF-α, IL-6 and IL-10 by HaCaT and HGF. Ropi-HP-β-CD increased twofold the IL-6 release by HGF in comparison with the control, while 100 μm ropi-MLV led to an increased release of all pro-inflammatory cytokines by HGF.

Conclusion

The loss in cell viability was not related to cellular apoptosis. Ropi complexed with HP-β-CD showed a similar cytokine release pattern when compared to the plain formulation. Thus, the HP-β-CD form was a better drug carrier than the MLV form for ropivacaine drug delivery.

From micro- to nanostructured implantable device for local anesthetic delivery

Local anesthetics block the transmission of painful stimuli to the brain by acting on ion channels of nociceptor fibers, and find application in the management of acute and chronic pain. Despite the key role they play in modern medicine, their cardio and neurotoxicity (together with their short half-life) stress the need for developing implantable devices for tailored local drug release, with the aim of counterbalancing their side effects and prolonging their pharmacological activity. This review discusses the evolution of the physical forms of local anesthetic delivery systems during the past decades. Depending on the use of different biocompatible materials (degradable polyesters, thermosensitive hydrogels, and liposomes and hydrogels from natural polymers) and manufacturing processes, these systems can be classified as films or micro- or nanostructured devices. We analyze and summarize the production techniques according to this classification, focusing on their relative advantages and disadvantages. The most relevant trend reported in this work highlights the effort of moving from microstructured to nanostructured systems, with the aim of reaching a scale comparable to the biological environment. Improved intracellular penetration compared to microstructured systems, indeed, provides specific drug absorption into the targeted tissue and can lead to an enhancement of its bioavailability and retention time. Nanostructured systems are realized by the modification of existing manufacturing processes (interfacial deposition and nanoprecipitation for degradable polyester particles and high- or low-temperature homogenization for liposomes) or development of novel strategies (electrospun matrices and nanogels). The high surface-to-volume ratio that characterizes nanostructured devices often leads to a burst drug release. This drawback needs to be addressed to fully exploit the advantage of the interaction between the target tissues and the drug: possible strategies could involve specific binding between the drug and the material chosen for the device, and a multiscale approach to reach a tailored, prolonged drug release.

Poly (caprolactone) microparticles and chitosan thermogels based injectable formulation of etoricoxib for the potential treatment of osteoarthritis

This study aimed to evaluate Poly (caprolactone) microparticles (MPs) loaded composite injectable Chitosan gel (CICGs) as a dual purpose (visco-supplement and intra articular drug delivery depot) therapeutic agent for the treatment of Osteoarthritis. Etoricoxib (COX-2 inhibitor), a highly hydrophobic drug was chosen as a model drug for the study. When administered orally, Etoricoxib poses severe cardiovascular toxicity issues. So, we have attempted to deliver this drug intra-articularly, which could retain the drug longer in the joint region and thus could ameliorate these toxicity issues. CICGs were prepared by dispersing MPs in the chitosan-Ammonium hydrogen phosphate solution and incubated at 37 °C. Rheology studies proved that gels were stable and had visco-elastic properties comparable to that of existing visco-supplements. The in vitro drug release profiles of CICGs were found to be more controlled when compared to MPs and bare chitosan gel (BCGs). In vitro and in vivo biocompatibility studies proved that the gels were biocompatible. In vivo synovial drug clearance studies proved that CICGs had a better drug retention capacity than BCGs and MPs. In vivo fluorescence imaging results confirmed that CICGs could stay longer in the joint region when compared to BCGs and MPs. Thus this novel CICGs could be a potential dual purpose gel for the treatment of diseased joint regions especially for Osteoarthritis.

Local, Controlled Delivery of Local Anesthetics In Vivo from Polymer - Xerogel Composites

PURPOSE

Polymer-xerogel composite materials have been introduced to better optimize local anesthetics release kinetics for the pain management. In a previous study, it was shown that by adjusting various compositional and nano-structural properties of both inorganic xerogels and polymers, zero-order release kinetics over 7 days can be achieved in vitro. In this study, in vitro release properties are confirmed in vivo using a model that tests for actual functionality of the released local anesthetics.

METHODS

Composite materials made with tyrosine-polyethylene glycol(PEG)-derived poly(ether carbonate) copolymers and silica-based sol-gel (xerogel) were synthesized. The in vivo release from the composite controlled release materials was demonstrated by local anesthetics delivery in a rat incisional pain model.

RESULTS

The tactile allodynia resulting from incision was significantly attenuated in rats receiving drug-containing composites compared with the control and sham groups for the duration during which natural healing had not yet taken place. The concentration of drug (bupivacaine) in blood is dose dependent and maintained stable up to 120 h post-surgery, the longest time point measured.

CONCLUSIONS

These in vivo studies show that polymer-xerogel composite materials with controlled release properties represent a promising class of controlled release materials for pain management.

Pain management via local anesthetics and responsive hydrogels

Acute and chronic pain control is a significant clinical challenge that has been largely unmet. Local anesthetics are widely used for the control of post-operative pain and in the therapy of acute and chronic pain. While a variety of approaches are currently used to prolong the duration of action of local anesthetics, an optimal strategy to achieve neural blockage for several hours to days with minimal toxicity has yet to be identified. Several drug delivery systems such as liposomes, microparticles and nanoparticles have been investigated as local anesthetic delivery vehicles to achieve prolonged anesthesia. Recently, injectable responsive hydrogels raise significant interest for the localized delivery of anesthetic molecules. This paper discusses the potential of injectable hydrogels to prolong the action of local anesthetics.

Injectable chitosan thermogels for sustained and localized delivery of pingyangmycin in vascular malformations

Pingyangmycin (PYM) is an effective drug to treat vascular malformations (VM), but can easily diffuse from the injection site, which will reduce its therapeutic effect and increase side effect. Our study was to evaluate PYM-loaded chitosan thermogels for sustained and localized embolization therapy. It was shown that in vitro release of PYM thermogels could be delayed up to 12 days. The results measured by MTT assay showed that PYM thermogels could inhibit proliferation and induce apoptosis of EA.hy926 cells in a concentration and time dependent manner. In vivo pharmacokinetics study demonstrated that compared with PYM injections, PYM thermogels had a better sustained delivery of PYM. Macroscopic observation and histological examination of rabbit ear veins displayed that after administration with PYM thermogels for 18 days, obvious venous embolization and inflammatory response could be found. These results indicate that PYM thermogels is likely to achieve excellent prospects for VM treatment.

Biodegradable thermogelling polymers: working towards clinical applications

As society ages, aging medical problems such as organ damage or failure among senior citizens increases, raising the demand for organ repair technologies. Synthetic materials have been developed and applied in various parts of human body to meet the biomedical needs. Hydrogels, in particular, have found extensive applications as wound healing, drug delivery and controlled release, and scaffold materials in the human body. The development of the next generation of soft hydrogel biomaterials focuses on facile synthetic methods, efficacy of treatment, and tunable multi-functionalities for applications. Supramolecular 3D entities are highly attractive materials for biomedical application. They are assembled by modules via various non-covalent bonds (hydrogen bonds, p-p stacking and/or van der Waals interactions). Biodegradable thermogels are a class of such supramolecular assembled materials. Their use as soft biomaterials and their related applications are described in this Review.

Facile fabrication of polyanhydride/anesthetic nanoparticles with tunable release kinetics

This work illustrates a two-step strategy for the fabrication of polymer/drug nanoparticles. Utilizing solvent/non-solvent precipitation and gaseous basification, composite nanoparticles with 0-100% drug loadings are fabricated. Drug release kinetics are dictated by nanoparticle composition allowing future tuning for therapeutic applications.