Repair of rabbit segmental femoral defects by using a combination of tetrapod-shaped calcium phosphate granules and basic fibroblast growth factor-binding ion complex gel

Bilayer nanostructure coated AZ31 magnesium alloy implants: in vivo reconstruction of critical-sized rabbit femoral segmental bone defect

Healing or reconstruction of critical-sized bone defects is still challenging in orthopaedic practice. In this study, we developed a new approach to control the degradation and improve the bone regeneration of the AZ31 magnesium substrate, fabricated as mesh cage implants. Subsequently, bilayer nanocomposite coating was carried out using polycaprolactone (PCL) and nano-hydroxyapatite (nHA) by dip-coating and electrospinning. Lastly, the healing capacity of the implants was studied in New Zealand White (NZW) rabbit critical-sized femur bone defects. X-ray analysis showed the coated implant group bridged and healed the critical defects 100% during four weeks of post-implantation. Micro-computed tomography (Micro-CT) study showed higher total bone volume (21.10%), trabecular thickness (0.73), and total porosity (85.71%) with bilayer coated implants than uncoated. Our results showed that nanocomposite coated implants controlled the in vivo degradation and improved bioactivity. Hence, the coated implants can be used as a promising bioresorbable implant for critical segmental bone defect repair applications.

Fabrication and Application of a 3D-Printed Poly-ε-Caprolactone Cage Scaffold for Bone Tissue Engineering

Poly-ε-caprolactone (PCL) is a promising synthetic material in bone tissue engineering (BTE). Particularly, the introduction of rapid prototyping (RP) represents the possibility of manufacturing PCL scaffolds with customized appearances and structures. Bio-Oss is a natural bone mineral matrix with significant osteogenic effects; however, it has limitations in being constructed and maintained into specific shapes and sites. In this study, we used RP and fabricated a hollow-structured cage-shaped PCL scaffold loaded with Bio-Oss to form a hybrid scaffold for BTE. Moreover, we adopted NaOH surface treatment to improve PCL hydrophilicity and enhance cell adhesion. The results showed that the NaOH-treated hybrid scaffold could enhance the osteogenesis of human bone marrow-derived mesenchymal stem cells (hBMMSCs) both in vitro and in vivo. Altogether, we reveal a novel hybrid scaffold that not only possesses osteoinductive function to promote bone formation but can also be fabricated into specific forms. This scaffold design may have great application potential in bone tissue engineering.

Advances in Exotic Animal Osteosynthesis

Exotic animal orthopedics has not incorporated the most recent progress made in small animal surgery or human medicine. Although minimally invasive osteosynthesis has been incorporated as a routinely used alternative in small animals, its use in exotic animals is still in its infancy. This article compliments the reviews of orthopedics in small mammals, birds, and reptiles in the previous issue. It reviews relevant recent studies performed in laboratory animals about new orthopedic materials and techniques showing potential to become incorporated into the routine orthopedic treatment of exotic animals in the coming years.

Exotic Mammal Orthopedics

Orthopedic disorders are a common clinical presentation for the exotic clinician. Before treating the fracture it is vital to stabilize the patient. Small exotic mammals are characterized by relatively thinner bones, adding to the difficulty the small size already represents. A combination of conservative and surgical treatment options are available. The principles of orthopedic surgery and ideas behind the treatment options remain the same as for small mammals, but not all techniques can be directly extrapolated. Historically, the tie-in fixator has been the preferred surgical choice whenever feasible, but further development in bone plates represents a promising advancement.

Reducing the risk of impaired bone apposition to titanium screws with the use of fibroblast growth factor-2-apatite composite layer coating

BACKGROUND

Loosening of screws is a common problem in orthopedic and maxillofacial surgery. Modifying the implant surface to improve the mechanical strength of screws has been tried and reported. We developed screws coated with fibroblast growth factor-2 (FGF-2)-apatite composite layers. We then showed, in a percutaneous external fixation model, that this composite layer had the ability to hold and release FGF-2 slowly, thereby reducing the risk of pin tract infection of the percutaneous external fixation. The objective of the current study was to clarify the effect of FGF-2-apatite composite layers on titanium screws on bone formation around the screw.

METHODS

We analyzed samples of previously performed animal experiments. The screws were coated with FGF-2-apatite composite layers by immersing them in supersaturated calcium phosphate solutions containing FGF-2. Then, the uncoated, apatite-coated, and FGF-2-apatite composite layer-coated screws were implanted percutaneously in rabbits. Finally, using inflammation-free histological sections, we histomorphometrically assessed them for the presence of bone formation. Weibull plot analysis was then applied to the data.

RESULTS

On average, screws coated with FGF-2-apatite composite layers showed a significantly higher bone apposition rate than the uncoated or apatite-coated screws. Although the difference in the average bone apposition rate was small, the FGF-2-apatite composite layers produced a significant, marked reduction in the incidence of impaired bone formation around the screw compared with the incidence in the absence of FGF-2 (uncoated and apatite-coated screws). The probability of resulting in a bone apposition rate equal to or less than 63.75%, for example, is 3.5 × 10^-4 for screws coated with the FGF-2-apatite composite layers versus 0.05 for screws in the absence of FGF-2.

CONCLUSIONS

FGF-2-apatite composite layer coating significantly reduced the risk of impaired bone apposition to the screw. Thus, it is feasible to use titanium screws coated with FGF-2-apatite composite layers as internal fixation screws to decrease the risk of loosening.

Repair of segmental radial defects in dogs using tailor-made titanium mesh cages with plates combined with calcium phosphate granules and basic fibroblast growth factor-binding ion complex gel

Repair of large segmental defects of long bones are a tremendous challenge that calls for a novel approach to supporting immediate weight bearing and bone regeneration. This study investigated the functional and biological characteristics of a combination of a tailor-made titanium mesh cage with a plate (tTMCP) with tetrapod-shaped alpha tricalcium phosphate granules (TB) and basic fibroblast growth factor (bFGF)-binding ion complex gel (f-IC gel) to repair 20-mm segmental radial defects in dogs. The defects were created surgically in 18 adult beagle dogs and treated by implantation of tTMCPs with TB with (TB-gel group) or without (TB group) f-IC gel. Each tTMCP fitted the defect well, and all dogs could bear weight on the affected limb immediately after surgery. Dogs were euthanized 4, 8 and 24 weeks after implantation. Histomorphometry showed greater infiltration of new vessels and higher bone union rate in the TB-gel group than in the TB group. The lamellar bone volume and mineral apposition rate did not differ significantly between the groups, indicating that neovascularization may be the primary effect of f-IC gel on bone regeneration. This combination method which is tTMCP combined with TB and f-IC gel, would be useful for the treatment of segmental long bone defects.

Bone regeneration by the combined use of tetrapod-shaped calcium phosphate granules with basic fibroblast growth factor-binding ion complex gel in canine segmental radial defects

The effect of tetrapod-shaped alpha tricalcium phosphate granules (Tetrabones(®) [TB]) in combination with basic fibroblast growth factor (bFGF)-binding ion complex gel (f-IC gel) on bone defect repair was examined. Bilateral segmental defects 20-mm long were created in the radius of 5 dogs, stabilized with a plate and screws and implanted with 1 of the following: TB (TB group), TB and bFGF solution (TB/f group), and TB and f-IC gel (TB/f-IC group). Dogs were euthanized 4 weeks after surgery. Radiographs showed well-placed TB granules in the defects and equal osseous callus formation in all the groups. Histomorphometry revealed that the number of vessels and volume of new bone in the TB/f-IC group were significantly higher than those in the other groups. However, no significant differences in neovascularization and new bone formation were observed between the TB/f and TB groups. Furthermore, no significant difference in the lamellar bone volume or rate of mineral apposition was observed among groups. These results suggest that increased bone formation might have been because of the promotion of neovascularization by the f-IC gel. Therefore, the combinatorial method may provide a suitable scaffold for bone regeneration in large segmental long bone defects.