Re-evaluating the induction of bone formation in primates

Mechanistic insights into the spontaneous induction of bone formation

The grand discovery of morphogens, or "form-generating substances", revealed that tissue morphogenesis is initiated by soluble molecular signals or morphogens primarily belonging to the transforming growth factor-β (TGF-β) supergene family. The regenerative potential of bone rests on its extracellular matrix, which is the repository of several morphogens that tightly control cellular differentiating pathways, cellular matrix deposition and remodeling. Alluringly, the matrix also contains specific factors transferred from the heterotopic implanted bone matrices initiating "Tissue Induction", as provocatively described in Nature in 1945. Later, it was found that selected genes and gene products of the TGF-β supergene family singly, synchronously, and synergistically mastermind the induction of bone formation. This review describes the phenomenon of the spontaneous and/or intrinsic osteoinductivity of calcium phosphate-based biomaterials and titanium' constructs without the applications of soluble osteogenetic molecular signals. The review shows the spontaneous induction of bone formation initiated by Ca++ activating stem cell differentiation and up-regulation of bone morphogenetic proteins genes. Expressed gene products are embedded into the concavities of the calcium phosphate-based substrata, initiating bone formation as a secondary response. Pure titanium's substrata do not initiate the spontaneous induction of bone formation. The induction of bone is solely dependent on acid, alkali and heat treatments to form apatite layers on the treated titanium surfaces. The induction of bone formation is achieved exclusively by apatite-based biomaterial surfaces. The hydroxyapatite, in its various forms and geometric configurations, finely tunes the induction of bone formation in heterotopic sites. Cellular differentiation by fine-tuning of the cellular molecular machinery is initiated by specific geometric modularity of the hydroxyapatite substrata that push cellular buttons that start the ripple-like cascade of "Tissue Induction", generating newly formed ossicles with bone marrow in heterotopic extraskeletal sites. The highlighted mechanistic insights into the spontaneous induction of bone formation are a research platform invocating selected molecular elements to construct the induction of bone formation.

Personalized 3D printed scaffolds: The ethical aspects

Personalized 3D printed scaffolds are a new generation of implants for tissue engineering and regenerative medicine purposes. Scaffolds support cell growth, providing an artificial extracellular matrix for tissue repair and regeneration and can biodegrade once cells have assumed their physiological and structural roles. The ethical challenges and opportunities of these implants should be mapped in parallel with the life cycle of the scaffold to assist their development and implementation in a responsible, safe, and ethically sound manner. This article provides an overview of these relevant ethical aspects. We identified nine themes which were linked to three stages of the life cycle of the scaffold: the development process, clinical testing, and the implementation process. The described ethical issues are related to good research and clinical practices, such as privacy issues concerning digitalization, first-in-human trials, responsibility and commercialization. At the same time, this article also creates awareness for underexplored ethical issues, such as irreversibility, embodiment and the ontological status of these scaffolds. Moreover, it exemplifies how to include gender in the ethical assessment of new technologies. These issues are important for responsible development and implementation of personalized 3D printed scaffolds and in need of more attention within the additive manufacturing and tissue engineering field. Moreover, the insights of this review reveal unresolved qualitative empirical and normative questions that could further deepen the understanding and co-creation of the ethical implications of this new generation of implants.

The Ethical Implications of Tissue Engineering for Regenerative Purposes: A Systematic Review

Tissue Engineering (TE) is a branch of Regenerative Medicine (RM) that combines stem cells and biomaterial scaffolds to create living tissue constructs to restore patients' organs after injury or disease. Over the last decade, emerging technologies such as 3D bioprinting, biofabrication, supramolecular materials, induced pluripotent stem cells, and organoids have entered the field. While this rapidly evolving field is expected to have great therapeutic potential, its development from bench to bedside presents several ethical and societal challenges. To make sure TE will reach its ultimate goal of improving patient welfare, these challenges should be mapped out and evaluated. Therefore, we performed a systematic review of the ethical implications of the development and application of TE for regenerative purposes, as mentioned in the academic literature. A search query in PubMed, Embase, Scopus, and PhilPapers yielded 2451 unique articles. After systematic screening, 237 relevant ethical and biomedical articles published between 2008 and 2021 were included in our review. We identified a broad range of ethical implications that could be categorized under 10 themes. Seven themes trace the development from bench to bedside: (1) animal experimentation, (2) handling human tissue, (3) informed consent, (4) therapeutic potential, (5) risk and safety, (6) clinical translation, and (7) societal impact. Three themes represent ethical safeguards relevant to all developmental phases: (8) scientific integrity, (9) regulation, and (10) patient and public involvement. This review reveals that since 2008 a significant body of literature has emerged on how to design clinical trials for TE in a responsible manner. However, several topics remain in need of more attention. These include the acceptability of alternative translational pathways outside clinical trials, soft impacts on society and questions of ownership over engineered tissues. Overall, this overview of the ethical and societal implications of the field will help promote responsible development of new interventions in TE and RM. It can also serve as a valuable resource and educational tool for scientists, engineers, and clinicians in the field by providing an overview of the ethical considerations relevant to their work. Impact statement To our knowledge, this is the first time that the ethical implications of Tissue Engineering (TE) have been reviewed systematically. By gathering existing scholarly work and identifying knowledge gaps, this review facilitates further research into the ethical and societal implications of TE and Regenerative Medicine (RM) and other emerging biomedical technologies. Moreover, it will serve as a valuable resource and educational tool for scientists, engineers, and clinicians in the field by providing an overview of the ethical considerations relevant to their work. As such, our review may promote successful and responsible development of new strategies in TE and RM.

Frontiers of Hydroxyapatite Composites in Bionic Bone Tissue Engineering

Bone defects caused by various factors may cause morphological and functional disorders that can seriously affect patient's quality of life. Autologous bone grafting is morbid, involves numerous complications, and provides limited volume at donor site. Hence, tissue-engineered bone is a better alternative for repair of bone defects and for promoting a patient's functional recovery. Besides good biocompatibility, scaffolding materials represented by hydroxyapatite (HA) composites in tissue-engineered bone also have strong ability to guide bone regeneration. The development of manufacturing technology and advances in material science have made HA composite scaffolding more closely related to the composition and mechanical properties of natural bone. The surface morphology and pore diameter of the scaffold material are more important for cell proliferation, differentiation, and nutrient exchange. The degradation rate of the composite scaffold should match the rate of osteogenesis, and the loading of cells/cytokine is beneficial to promote the formation of new bone. In conclusion, there is no doubt that a breakthrough has been made in composition, mechanical properties, and degradation of HA composites. Biomimetic tissue-engineered bone based on vascularization and innervation show a promising future.

Growth factors produced by bone marrow stromal cells on nanoroughened titanium-aluminum-vanadium surfaces program distal MSCs into osteoblasts via BMP2 signaling

Statement of Clinical Significance: There remains the need to develop materials and surfaces that can increase the rate of implant osseointegration. Though osteoanabolic agents, like bone morphogenetic protein (BMP), can provide signaling for osteogenesis, the appropriate design of implants can also produce an innate cellular response that may reduce or eliminate the need to use additional agents to stimulate bone formation. Studies show that titanium implant surfaces that mimic the physical properties of osteoclast resorption pits regulate cellular responses of bone marrow stromal cells (MSCs) by altering cell morphology, transcriptomes, and local factor production to increase their differentiation into osteoblasts without osteogenic media supplements required for differentiation of MSCs on tissue culture polystyrene (TCPS). The goal of this study was to determine how cells in contact with biomimetic implant surfaces regulate the microenvironment around these surfaces in vitro. Two different approaches were used. First, unidirectional signaling was assessed by treating human MSCs grown on TCPS with conditioned media from MSC cultures grown on Ti6Al4V biomimetic surfaces. In the second set of studies, bidirectional signaling was assessed by coculturing MSCs grown on mesh inserts that were placed into culture wells in which MSCs were grown on the biomimetic Ti6Al4V substrates. The results show that biomimetic Ti6Al4V surface properties induce MSCs to produce factors within 7 days of culture that stimulate MSCs not in contact with the surface to exhibit an osteoblast phenotype via endogenous BMP2 acting in a paracrine signaling manner.

In Vitro Osteoinductivity Assay of Hydroxylapatite Scaffolds, Obtained with Biomorphic Transformation Processes, Assessed Using Human Adipose Stem Cell Cultures

In this study, the in vitro biocompatibility and osteoinductive ability of a recently developed biomorphic hydroxylapatite ceramic scaffold (B-HA) derived from transformation of wood structures were analyzed using human adipose stem cells (hASCs). Cell viability and metabolic activity were evaluated in hASCs, parental cells and in recombinant genetically engineered hASC-eGFP cells expressing the green fluorescence protein. B-HA osteoinductivity properties, such as differentially expressed genes (DEG) involved in the skeletal development pathway, osteocalcin (OCN) protein expression and mineral matrix deposition in hASCs, were evaluated. In vitro induction of osteoblastic genes, such as Alkaline phosphatase (ALPL), Bone gamma-carboxyglutamate (gla) protein (BGLAP), SMAD family member 3 (SMAD3), Sp7 transcription factor (SP7) and Transforming growth factor, beta 3 (TGFB3) and Tumor necrosis factor (ligand) superfamily, member 11 (TNFSF11)/Receptor activator of NF-κB (RANK) ligand (RANKL), involved in osteoclast differentiation, was undertaken in cells grown on B-HA. Chondrogenic transcription factor SRY (sex determining region Y)-box 9 (SOX9), tested up-regulated in hASCs grown on the B-HA scaffold. Gene expression enhancement in the skeletal development pathway was detected in hASCs using B-HA compared to sintered hydroxylapatite (S-HA). OCN protein expression and calcium deposition were increased in hASCs grown on B-HA in comparison with the control. This study demonstrates the biocompatibility of the novel biomorphic B-HA scaffold and its potential use in osteogenic differentiation for hASCs. Our data highlight the relevance of B-HA for bone regeneration purposes.

Functionalization of Synthetic Bone Substitutes

Bone substitutes have been applied to treat osseous defects for a long time. To prevent implant related infection (IRI) and enhance bone healing functionalized biomaterials, antibiotics and osteoinductive substances have been introduced. This study gives an overview of the current available surface-coated bone substitutes and provides an outlook for future perspectives.

Comparative proteomic analysis of human mesenchymal stromal cell behavior on calcium phosphate ceramics with different osteoinductive potential

In recent years, synthetic calcium phosphate (CaP) ceramics have emerged as an alternative to bone grafts in the treatment of large critical-sized bone defects. To successfully substitute for bone grafts, materials must be osteoinductive, that is, they must induce osteogenic differentiation and subsequent bone formation in vivo. Although a set of osteoinductive CaP ceramics has been developed, the precise biological mechanism by which a material directs cells toward osteogenesis and the role of individual chemical and physical properties in this mechanism remain incompletely understood. Here, we used proteomics to compare serum protein adsorption to two CaP ceramics with different osteoinductive potential, namely an osteoinductive β-tricalcium phosphate (TCP) and a non-osteoinductive hydroxyapatite (HA). Moreover, we analyzed the protein profiles of human mesenchymal stromal cells (hMSCs) cultured on these two ceramics. The serum protein adsorption experiments in the absence of cells highlighted the proteins that are highly abundant in the serum and/or have a high affinity to CaP. The extent of adsorption was suggested to be affected by the available surface area for binding and by the ion exchange dynamics on the surface. Several proteins were uniquely expressed by hMSCs on TCP and HA surfaces. Proteins identified as enriched on TCP were involved in processes related to wound healing, cell proliferation, and the production of extracellular matrix. On the other hand, proteins that were enriched on HA were involved in processes related to protein production, translation, localization, and secretion. In addition, we performed a separate proteomics analysis on TCP, HA, and two biphasic calcium phosphates with known osteoinductive potential and performed a clustering analysis on a combination of a set of proteins found to be enriched on osteoinductive materials with a set of proteins already known to be involved in osteogenesis. This yielded two protein networks potentially involved in the process of osteoinduction – one consisting of collagen fragments and collagen-related enzymes and a second consisting of endopeptidase inhibitors and regulatory proteins. The results of this study show that protein profiling can be a useful tool to help understand the effect of biomaterial properties on the interactions between a biomaterial and a biological system. Such understanding will contribute to the design and development of improved biomaterials for (bone) regenerative therapies.

Transforming Growth Factor-β3/Chitosan Sponge (TGF-β3/CS) Facilitates Osteogenic Differentiation of Human Periodontal Ligament Stem Cells

Periodontal disease is the main reason for tooth loss in adults. Tissue engineering and regenerative medicine are advanced technologies used to manage soft and hard tissue defects caused by periodontal disease. We developed a transforming growth factor-β3/chitosan sponge (TGF-β3/CS) to repair periodontal soft and hard tissue defects. We investigated the proliferation and osteogenic differentiation behaviors of primary human periodontal ligament stem cells (hPDLSCs) to determine the bioactivity and potential application of TGF-β3 in periodontal disease. We employed calcein-AM/propidium iodide (PI) double labeling or cell membranes (CM)-Dil labeling coupled with fluorescence microscopy to trace the survival and function of cells after implantation in vitro and in vivo. The mineralization of osteogenically differentiated hPDLSCs was confirmed by measuring alkaline phosphatase (ALP) activity and calcium content. The levels of COL I, ALP, TGF-βRI, TGF-βRII, and Pp38/t-p38 were assessed by western blotting to explore the mechanism of bone repair prompted by TGF-β3. When hPDLSCs were implanted with various concentrations of TGF-β3/CS (62.5-500 ng/mL), ALP activity was the highest in the TGF-β3 (250 ng/mL) group after 7 d (p < 0.05 vs. control). The calcium content in each group was increased significantly after 21 and 28 d (p < 0.001 vs. control). The optimal result was achieved by the TGF-β3 (500 ng/mL) group. These results showed that TGF-β3/CS promotes osteogenic differentiation of hPDLSCs, which may involve the p38 mitogen-activated protein kinase (MAPK) signaling pathway. TGF-β3/CS has the potential for application in the repair of incomplete alveolar bone defects.

Functionalized Surface Geometries Induce: "Bone: Formation by Autoinduction"

The induction of tissue formation, and the allied disciplines of tissue engineering and regenerative medicine, have flooded the twenty-first century tissue biology scenario and morphed into high expectations of a fulfilling regenerative dream of molecularly generated tissues and organs in assembling human tissue factories. The grand conceptualization of deploying soluble molecular signals, first defined by Turing as forms generating substances, or morphogens, stemmed from classic last century studies that hypothesized the presence of morphogens in several mineralized and non-mineralized mammalian matrices. The realization of morphogens within mammalian matrices devised dissociative extractions and chromatographic procedures to isolate, purify, and finally reconstitute the cloned morphogens, found to be members of the transforming growth factor-β (TGF-β) supergene family, with insoluble signals or substrata to induce de novo tissue induction and morphogenesis. Can we however construct macroporous bioreactors per se capable of inducing bone formation even without the exogenous applications of the osteogenic soluble molecular signals of the TGF-β supergene family? This review describes original research on coral-derived calcium phosphate-based macroporous constructs showing that the formation of bone is independent of the exogenous application of the osteogenic soluble signals of the TGF-β supergene family. Such signals are the molecular bases of the induction of bone formation. The aim of this review is to primarily describe today's hottest topic of biomaterials' science, i.e., to construct and define osteogenetic biomaterials' surfaces that per se, in its own right, do initiate the induction of bone formation. Biomaterials are often used to reconstruct osseous defects particularly in the craniofacial skeleton. Edentulism did spring titanium implants as tooth replacement strategies. No were else that titanium surfaces require functionalized geometric nanotopographic cues to set into motion osteogenesis independently of the exogenous application of the osteogenic soluble molecular signals. Inductive morphogenetic surfaces are the way ahead of biomaterials' science: the connubium of stem cells on primed functionalized surfaces precisely regulates gene expression and the induction of the osteogenic phenotype.

Demineralized Dentin Matrix (DDM) As a Carrier for Recombinant Human Bone Morphogenetic Proteins (rhBMP-2)

A bone graft and bone graft substitute should have at least one of the following properties: it should be (1) osteogenic, (2) osteoinductive and/or (3) osteoconductive. In addition, bone graft substitutes should be biocompatible and bioresorbable as well as easy to use and cost effective. Autologous cancellous bone is the clinical gold standard in bone grafting procedures1, 4 and it has osteogenic, osteoinductive, and osteoconductive properties. Because of disadvantages associated with harvesting autologous bone graft material, such as requiring an additional operation and possible donor site morbidity, there is a need for an alternative in terms of enhancing the bone healing for the treatment of large bony defects. One possible option is a newly developed biomaterial, the demineralized dentin matrix (DDM). It is based on autogenous tooth dentin and is produced through demineralization. It is osteoconductive and osteoinductive due to the fact that dentin contains extracellular Type I collagen and various growth factors. Based on the demineralization process the factors stay available to the host environment. In 1965, Urist already showed the formation of ectopic bone after implanting DDM into muscle pouches in rodents. DDM is used for example in dental surgery in the treatment of extraction socket preservation and guided bone regenerations. It functions as a scaffold to support bone regeneration, but can also be used as a carrier for rhBMP-2. When DDM serves as a carrier, it combines the properties of the grafting material with those of the delivered substances. This chapter will present the experimental and clinical studies of DDM for rhBMP-2 carrier as well as alternatives of bone graft substitute.

Wnt Signaling-Related Osteokines and Transforming Growth Factors Before and After a Single Bout of Plyometric Exercise in Child and Adolescent Females

This study examined resting levels of catabolic and anabolic osteokines related to Wnt signaling and their responses to a single bout of plyometric exercise in child and adolescent females. Fourteen premenarcheal girls [10.5 (1.8) y old] and 12 postmenarcheal adolescent girls [15.0 (1.0) y old] performed a plyometric exercise trial. One resting and 3 postexercise blood samples (5 min, 1 h, and 24 h postexercise) were analyzed for sclerostin, dickkopf-1 (DKK-1), osteoprotegerin (OPG), receptor activator of nuclear factor kappa-β ligand (RANKL), and transforming growth factors (TGF-β1, TGF-β2, and TGF-β3). Premenarcheal girls had significantly higher resting sclerostin, TGF-β1, TGF-β2, and TGF-β3 than the postmenarcheal girls, with no significant time effect or group-by-time interaction. DKK-1 was higher in premenarcheal compared with postmenarcheal girls. There was an overall significant DKK-1 decrease from baseline to 1 h postexercise, which remained lower than baseline 24 h postexercise in both groups. There was neither a significant group effect nor group-by-time interaction in OPG, RANKL, and their ratio. RANKL decreased 5 min postexercise compared with baseline and remained significantly lower from baseline 24 h following the exercise. No changes were observed in OPG. OPG/RANKL ratio was significantly elevated compared with resting values 1 h postexercise. In young females, high-impact exercise induces an overall osteogenic effect through a transitory suppression of catabolic osteokines up to 24 h following exercise.

Warning About the Use of Critical-Size Defects for the Translational Study of Bone Repair: Analysis of a Sheep Tibial Model

The repair of large long bone defects requires complex surgical procedures as the bone loss cannot simply be replaced by autologous grafts due to an insufficient bone stock of the human body. Tissue engineering strategies and the use of Advanced Therapy Medicinal Products (ATMPs) for these reconstructions remain a considerable challenge, in particular since robust outcomes in well-defined large animal models are lacking. To be suitable as a model for treatment of human sized bone defects, we developed a large animal model in both skeletally immature and mature sheep and made close observations on the spontaneous healing of defects. We warn for the spontaneous repair of large defects in immature animals, which can mask the (in)effectiveness of ATMP therapies, and propose the use of large 4.5 cm defects that are pretreated with a polymethylmethacrylate (PMMA) spacer in skeletally mature animals.

* Demineralized Bone Matrix as a Carrier for Bone Morphogenetic Protein-2: Burst Release Combined with Long-Term Binding and Osteoinductive Activity Evaluated In Vitro and In Vivo

To allow bone defect regeneration, autologous bone grafting still represents the gold standard. However, autograft harvesting has limitations, including an additional surgery, donor site morbidity, and limited availability. Demineralized bone matrix (DBM) would represent an alternative, yet lacks sufficient osteoinductive properties. Combining DBM with a potent agent, such as bone morphogenetic protein-2 (BMP-2) might be a feasible alternative approach, optimizing an established grafting material with strong osteoinductive properties. A unique mixing device has been developed that enables perioperative handling to reach a homogeneous and standardized paste for bone defect filling. DBM proved in vitro to be a suitable carrier for BMP-2, with a documented release over 56 days at concentrations sufficient to stimulate osteogenic differentiation. At the end of the elution experiment, 56 days, bioactive BMP was still captured within the DBM. Using a sheep drill hole defect model, DBM perioperatively mixed with BMP-2 showed strong osteoinductive properties comparable to those of autologous bone and outnumbering the one of DBM alone or empty defects. Bone defect healing was enabled at diaphyseal and metaphyseal defects and thus BMP-2-doped DBM represented an easy perioperative enriching method and an efficient carrier for BMP-2. With the comparability to the clinical gold standard autologous bone, DBM mixed with BMP-2 might serve as possible alternative grafting material enabling a controlled osteogenic stimulation.

Redundancy and Molecular Evolution: The Rapid Induction of Bone Formation by the Mammalian Transforming Growth Factor-β3 Isoform

The soluble osteogenic molecular signals of the transforming growth factor-β (TGF-β) supergene family are the molecular bases of the induction of bone formation and postnatal bone tissue morphogenesis with translation into clinical contexts. The mammalian TGF-β3 isoform, a pleiotropic member of the family, controls a vast array of biological processes including the induction of bone formation. Recombinant hTGF-β3 induces substantial bone formation when implanted with either collagenous bone matrices or coral-derived macroporous bioreactors in the rectus abdominis muscle of the non-human primate Papio ursinus. In marked contrast, the three mammalian TGF-βs do not initiate the induction of bone formation in rodents and lagomorphs. The induction of bone by hTGF-β3/preloaded bioreactors is orchestrated by inducing fibrin-fibronectin rings that structurally organize tissue patterning and morphogenesis within the macroporous spaces. Induced advancing extracellular matrix rings provide the structural anchorage for hyper chromatic cells, interpreted as differentiating osteoblasts re-programmed by hTGF-β3 from invading myoblastic and/or pericytic differentiated cells. Runx2 and Osteocalcin expression are significantly up-regulated correlating to multiple invading cells differentiating into the osteoblastic phenotype. Bioreactors pre-loaded with recombinant human Noggin (hNoggin), a BMPs antagonist, show down-regulation of BMP-2 and other profiled osteogenic proteins' genes resulting in minimal bone formation. Coral-derived macroporous constructs preloaded with binary applications of hTGF-β3 and hNoggin also show down-regulation of BMP-2 with the induction of limited bone formation. The induction of bone formation by hTGF-β3 is via the BMPs pathway and it is thus blocked by hNoggin. Our systematic studies in P. ursinus with translational hTGF-β3 in large cranio-mandibulo-facial defects in humans are now requesting the re-evaluation of "Bone: formation by autoinduction" in primate models including humans.

Redefining the induction of periodontal tissue regeneration in primates by the osteogenic proteins of the transforming growth factor-β supergene family

The molecular bases of periodontal tissue induction and regeneration are the osteogenic proteins of the transforming growth factor-β (TGF-β) supergene family. These morphogens act as soluble mediators for the induction of tissues morphogenesis sculpting the multicellular mineralized structures of the periodontal tissues with functionally oriented ligament fibers into newly formed cementum. Human TGF-β₃ (hTGF-β₃ ) in growth factor-reduced Matrigel^® matrix induces cementogenesis when implanted in class II mandibular furcation defects surgically prepared in the non-human primate Chacma baboon, Papio ursinus. The newly formed periodontal ligament space is characterized by running fibers tightly attached to the cementoid surface penetrating as mineralized constructs within the newly formed cementum assembling and initiating within the mineralized dentine. Angiogenesis heralds the newly formed periodontal ligament space, and newly sprouting capillaries are lined by cellular elements with condensed chromatin interpreted as angioblasts responsible for the rapid and sustained induction of angiogenesis. The inductive activity of hTGF-β₃ in Matrigel^® matrix is enhanced by the addition of autogenous morcellated fragments of the rectus abdominis muscle potentially providing myoblastic, pericytic/perivascular stem cells for continuous tissue induction and morphogenesis. The striated rectus abdominis muscle is endowed with stem cell niches in para/perivascular location, which can be dominant, thus imposing stem cell features or stemness to the surrounding cells. This capacity to impose stemness is morphologically shown by greater alveolar bone induction and cementogenesis when hTGF-β₃ in Matrigel^® matrix is combined with morcellated fragments of autogenous rectus abdominis muscle. The induction of periodontal tissue morphogenesis develops as a mosaic structure in which the osteogenic proteins of the TGF-β supergene family singly, synergistically and synchronously initiate and maintain tissue induction and morphogenesis. In primates, the presence of several homologous yet molecularly different isoforms with osteogenic activity highlights the biological significance of this apparent redundancy and indicates multiple interactions during embryonic development and bone regeneration in postnatal life. Molecular redundancy with associated different biological functionalities in primate tissues may simply represent the fine-tuning of speciation-related molecular evolution in anthropoid apes at the early Pliocene boundary, which resulted in finer tuning of the bone induction cascade.

Tissue segregation restores the induction of bone formation by the mammalian transforming growth factor-β(3) in calvarial defects of the non-human primate Papio ursinus

A diffusion molecular hypothesis from the dura and/or the leptomeninges below that would control the induction of calvarial membranous bone formation by the recombinant human transforming growth factor-β3 (hTGF-β3) was investigated. Coral-derived calcium carbonate-based macroporous constructs (25 mm diameter; 3.5/4 mm thickness) with limited hydrothermal conversion to hydroxyapatite (7% HA/CC) were inserted into forty calvarial defects created in 10 adult Chacma baboons Papio ursinus. In 20 defects, an impermeable nylon foil membrane (SupraFOIL(®)) was inserted between the cut endocranial bone and the underlying dura mater. Twenty of the macroporous constructs were preloaded with hTGF-β3 (125 μg in 1000 μl 20 mM sodium succinate, 4% mannitol pH4.0), 10 of which were implanted into defects segregated by the SupraFOIL(®) membrane, and 10 into non-segregated defects. Tissues were harvested on day 90, processed for decalcified and undecalcified histology and quantitative real-time polymerase chain reaction (qRT-PCR). Segregated untreated macroporous specimens showed a reduction of bone formation across the macroporous spaces compared to non-segregated constructs. qRT-PCR of segregated untreated specimens showed down regulation of osteogenic protein-1 (OP-1), osteocalcin (OC), bone morphogenetic protein-2 (BMP-2), RUNX-2 and inhibitor of DNA binding-2 and -3 (ID2,ID3) and up regulation of TGF-β3, a molecular signalling pathway inhibiting the induction of membranous bone formation. Non-segregated hTGF-β3/treated constructs also showed non-osteogenic expression profiles when compared to non-segregated untreated specimens. Segregated hTGF-β3/treated 7% HA/CC constructs showed significantly greater induction of bone formation across the macroporous spaces and, compared to non-segregated hTGF-β3/treated constructs, showed up regulation of OP-1, OC, BMP-2, RUNX-2, ID2 and ID3. Similar up-regulated expression profiles were seen for untreated non-segregated constructs. TGF-β signalling via ID genes creates permissive or refractory micro-environments that regulate the induction of calvarial bone formation which is controlled by the exogenous hTGF-β3 upon segregation of the calvarial defects. The dura is the common regulator of the induction of calvarial bone formation modulated by the presence or absence of the SupraFOIL(®) membrane with or without hTGF-β3.

Remineralization of demineralized bone matrix in critical size cranial defects in rats: A 6-month follow-up study

The key drawback of using demineralized bone matrix (DBM) is its low initial mechanical stability due to the severe depletion of mineral content. In the present study, we investigated the long-term regeneration of DBM in a critical size bone defect model and investigated the remineralization after 6 months. Bone defects were created in the cranium of male Wistar rats which were filled with DBM or left empty as negative control. In vivo bone formation was monitored with computed tomography after 11, 19, and 26 weeks postoperatively. After 6 months, parietal bones were subjected to micro-CT. Mineral content was determined with spectrophotometric analysis. After 11 weeks the DBM-filled bone defects were completely closed, while empty defects were still open. Density of the DBM-treated group increased significantly while the controls remained unchanged. Quantitative analysis by micro-CT confirmed the in vivo results, bone volume/tissue volume was significantly lower in the controls than in the DBM group. The demineralization procedure depleted the key minerals of the bone to a very low level. Six months after implantation Ca, P, Na, Mg, Zn, and Cr contents were completely restored to the normal level, while K, Sr, and Mn were only partially restored. The remineralization process of DBM is largely complete by the 6th month after implantation in terms of bone density, structure, and key mineral levels. Although DBM does not provide sufficient sources for any of these minerals, it induces a faster and more complete regeneration process. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1336-1342, 2016.