AMECM/DCB scaffold prompts successful total meniscus reconstruction in a rabbit total meniscectomy model

Advances in meniscus tissue engineering: Towards bridging the gaps from bench to bedside

Meniscus is vital for maintaining the anatomical and functional integrity of knee. Injuries to meniscus, commonly caused by trauma or degenerative processes, can result in knee joint dysfunction and secondary osteoarthritis, while current conservative and surgical interventions for meniscus injuries bear suboptimal outcomes. In the past decade, there has been a significant focus on advancing meniscus tissue engineering, encompassing isolated scaffold strategies, biological augmentation, physical stimulus, and meniscus organoids, to improve the prognosis of meniscus injuries. Despite noteworthy promising preclinical results, translational gaps and inconsistencies in the therapeutic efficiency between preclinical and clinical studies exist. This review comprehensively outlines the developments in meniscus tissue engineering over the past decade (Scheme 1). Reasons for the discordant results between preclinical and clinical trials, as well as potential strategies to expedite the translation of bench-to-bedside approaches are analyzed and discussed.

Surgical Therapy and Tissue Engineering for Meniscal Repair

Meniscal damage is one of the prevalent causes of knee pain, swelling, instability, and functional compromise, frequently culminating in osteoarthritis (OA). Timely and appropriate interventions are crucial to relieve symptoms and prevent or delay the onset of OA. Contemporary surgical treatments include total or partial meniscectomy, meniscal repair, allograft meniscal transplantation, and synthetic meniscal implants, but each presents its specific limitations. Recently, regenerative medicine and tissue engineering have emerged as promising fields, offering innovative prospects for meniscal regeneration and repair. This review delineates current surgical methods, elucidating their specific indications, advantages, and disadvantages. Concurrently, it delves into state-of-the-art tissue engineering techniques aimed at the functional regenerative repair of meniscus. Recommendations for future research and clinical practice are also provided.

Development of a novel approach for restoration of the meniscus using silk-elastin in a rabbit meniscus injury model

BACKGROUND

Limited healing potential of the meniscus remains a burden for the successful repair of meniscus injuries in the orthopaedic fields. Silk-elastin (SE) is a novel recombinant protein with favorable properties for wound healing. This proof-of-concept study aimed to investigate the therapeutic effect of silk-elastin in a rabbit meniscal defect model.

METHODS

A migration assay using rabbit meniscus and synovial cells with various concentrations of SE in a culture medium was conducted to investigate the mechanism of meniscal healing by SE. Additionally, cylindrical defects with a 1.5 mm diameter were created at the anterior horn of the medial meniscus of rabbits. The animals were divided into three groups: 1) the Blank group; defect only, 2) the Col I group; implantation of type I atelocollagen sponge, and 3) the SE group; implantation of SE (150 mg/ml) sponge. Whole medial menisci were harvested at 4, 8, 12, and 24 weeks after surgery. Histological analyses including immunohistochemical staining were performed to assess meniscal healing.

RESULTS

In vitro study, Migration assay demonstrated a significantly higher number of migrated cells only in synovial cells. Especially, the SE concentration of 10 µg/mL demonstrated the highest number of migrated cells compared with other concentrations. In vivo study, the SE group exhibited significantly higher Ishida scores than other groups at all time points. Furthermore, the SE group showed higher synovial coverage scores than the Col I group at 4 and 8 weeks. Immunohistochemical staining demonstrated higher type II collagen staining in the SE group compared to other groups at 12 weeks. Implanted SE was efficiently replaced by safranin-O staining positive tissue within 8 weeks.

CONCLUSIONS

SE could effectively repair a meniscal defect by inducing coverage of synovial cells. SE has the potential to be a useful material for meniscal repair.

Current advances in engineering meniscal tissues: insights into 3D printing, injectable hydrogels and physical stimulation based strategies

The knee meniscus is the cushioning fibro-cartilage tissue present in between the femoral condyles and tibial plateau of the knee joint. It is largely avascular in nature and suffers from a wide range of tears and injuries caused by accidents, trauma, active lifestyle of the populace and old age of individuals. Healing of the meniscus is especially difficult due to its avascularity and hence requires invasive arthroscopic approaches such as surgical resection, suturing or implantation. Though various tissue engineering approaches are proposed for the treatment of meniscus tears, three-dimensional (3D) printing/bioprinting, injectable hydrogels and physical stimulation involving modalities are gaining forefront in the past decade. A plethora of new printing approaches such as direct light photopolymerization and volumetric printing, injectable biomaterials loaded with growth factors and physical stimulation such as low-intensity ultrasound approaches are being added to the treatment portfolio along with the contemporary tear mitigation measures. This review discusses on the necessary design considerations, approaches for 3D modeling and design practices for meniscal tear treatments within the scope of tissue engineering and regeneration. Also, the suitable materials, cell sources, growth factors, fixation and lubrication strategies, mechanical stimulation approaches, 3D printing strategies and injectable hydrogels for meniscal tear management have been elaborated. We have also summarized potential technologies and the potential framework that could be the herald of the future of meniscus tissue engineering and repair approaches.

In situ self-assembled organoid for osteochondral tissue regeneration with dual functional units

The regeneration of hierarchical osteochondral units is challenging due to difficulties in inducing spatial, directional and controllable differentiation of mesenchymal stem cells (MSCs) into cartilage and bone compartments. Emerging organoid technology offers new opportunities for osteochondral regeneration. In this study, we developed gelatin-based microcryogels customized using hyaluronic acid (HA) and hydroxyapatite (HYP), respectively for inducing cartilage and bone regeneration (denoted as CH-Microcryogels and OS-Microcryogels) through in vivo self-assembly into osteochondral organoids. The customized microcryogels showed good cytocompatibility and induced chondrogenic and osteogenic differentiation of MSCs, while also demonstrating the ability to self-assemble into osteochondral organoids with no delamination in the biphasic cartilage-bone structure. Analysis by mRNA-seq showed that CH-Microcryogels promoted chondrogenic differentiation and inhibited inflammation, while OS-Microcryogels facilitated osteogenic differentiation and suppressed the immune response, by regulating specific signaling pathways. Finally, the in vivo engraftment of pre-differentiated customized microcryogels into canine osteochondral defects resulted in the spontaneous assembly of an osteochondral unit, inducing simultaneous regeneration of both articular cartilage and subchondral bone. In conclusion, this novel approach for generating self-assembling osteochondral organoids utilizing tailor-made microcryogels presents a highly promising avenue for advancing the field of tissue engineering.

STS loaded PCL-MECM based hydrogel hybrid scaffolds promote meniscal regeneration via modulating macrophage phenotype polarization

Meniscus injury has a limited ability to heal itself and often results in the progression to osteoarthritis. After a meniscus injury, there is an obvious acute or chronic inflammatory response in the articular cavity, which is not conducive to tissue regeneration. M2 macrophages are involved in tissue repair and remodeling. Regenerative medicine strategies for tissue regeneration by enhancing the phenotypic ratio of M2 : M1 macrophages have been demonstrated in a variety of tissues. However, there are no relevant reports in the field of meniscus tissue regeneration. In this study, we confirmed that sodium tanshinone IIA sulfonate (STS) could transform macrophages from M1 to M2 polarization. STS protects meniscal fibrochondrocytes (MFCs) against the effects of macrophage conditioned medium (CM). Moreover, STS attenuates interleukin (IL)-1β-induced inflammation, oxidative stress, apoptosis, and extracellular matrix (ECM) degradation in MFCs, possibly by inhibiting the interleukin-1 receptor-associated kinase 4 (IRAK4)/TNFR-associated factor 6 (TRAF6)/nuclear factor-kappaB (NF-κB) signaling pathway. An STS loaded polycaprolactone (PCL)-meniscus extracellular matrix (MECM) based hydrogel hybrid scaffold was fabricated. PCL provides mechanical support, the MECM based hydrogel provides a microenvironment conducive to cell proliferation and differentiation, and STS is used to drive M2 polarization and protect MFCs against the effects of inflammatory stimuli, thus providing an immune microenvironment conducive to regeneration. The results of subcutaneous implantation in vivo showed that hybrid scaffolds could induce M2 polarization in the early stage. In addition, the hybrid scaffolds seeded with MFCs could achieve good meniscus regeneration and chondroprotective effects in rabbits.

Preparation and Use of Decellularized Extracellular Matrix for Tissue Engineering

The multidisciplinary fields of tissue engineering and regenerative medicine have the potential to revolutionize the practise of medicine through the abilities to repair, regenerate, or replace tissues and organs with functional engineered constructs. To this end, tissue engineering combines scaffolding materials with cells and biologically active molecules into constructs with the appropriate structures and properties for tissue/organ regeneration, where scaffolding materials and biomolecules are the keys to mimic the native extracellular matrix (ECM). For this, one emerging way is to decellularize the native ECM into the materials suitable for, directly or in combination with other materials, creating functional constructs. Over the past decade, decellularized ECM (or dECM) has greatly facilitated the advance of tissue engineering and regenerative medicine, while being challenged in many ways. This article reviews the recent development of dECM for tissue engineering and regenerative medicine, with a focus on the preparation of dECM along with its influence on cell culture, the modification of dECM for use as a scaffolding material, and the novel techniques and emerging trends in processing dECM into functional constructs. We highlight the success of dECM and constructs in the in vitro, in vivo, and clinical applications and further identify the key issues and challenges involved, along with a discussion of future research directions.

Natural biopolymer scaffold for meniscus tissue engineering

Meniscal injuries caused by trauma, degeneration, osteoarthritis, or other diseases always result in severe joint pain and motor dysfunction. Due to the unique anatomy of the human meniscus, the damaged meniscus lacks the ability to repair itself. Moreover, current clinical treatments for meniscal injuries, including meniscal suturing or resection, have significant limitations and drawbacks. With developments in tissue engineering, biopolymer scaffolds have shown promise in meniscal injury repair. They act as templates for tissue repair and regeneration, interacting with surrounding cells and providing structural support for newly formed meniscal tissue. Biomaterials offer tremendous advantages in terms of biocompatibility, bioactivity, and modifiable mechanical and degradation kinetics. In this study, the preparation and composition of meniscal biopolymer scaffolds, as well as their properties, are summarized. The current status of research and future research prospects for meniscal biopolymer scaffolds are reviewed in terms of collagen, silk, hyaluronic acid, chitosan, and extracellular matrix (ECM) materials. Overall, such a comprehensive summary provides constructive suggestions for the development of meniscal biopolymer scaffolds in tissue engineering.

Demineralized Cortical Bone Matrix Augmented With Peripheral Blood-Derived Mesenchymal Stem Cells for Rabbit Medial Meniscal Reconstruction

Tissue engineering is a promising treatment strategy for meniscal regeneration after meniscal injury. However, existing scaffold materials and seed cells still have many disadvantages. The objective of the present study is to explore the feasibility of peripheral blood-derived mesenchymal stem cells (PBMSCs) augmented with demineralized cortical bone matrix (DCBM) pretreated with TGF-β3 as a tissue-engineered meniscus graft and the repair effect. PBMSCs were collected from rabbit peripheral blood and subjected to three-lineage differentiation and flow cytometry identification. DCBM was prepared by decalcification, decellularization, and cross-linking rabbit cortical bone. Various characteristics such as biomechanical properties, histological characteristics, microstructure and DNA content were characterized. The cytotoxicity and the effects of DCBM on the adhesion and migration of PBMSCs were evaluated separately. The meniscus-forming ability of PBMSCs/DCBM complex in vitro induced by TGF-β3 was also evaluated at the molecular and genetic levels, respectively. Eventually, the present study evaluated the repair effect and cartilage protection effect of PBMSCs/DCBM as a meniscal graft in a rabbit model of medial meniscal reconstruction in 3 and 6 months. The results showed PBMSCs positively express CD29 and CD44, negatively express CD34 and CD45, and have three-lineage differentiation ability, thus can be used as tissue engineering meniscus seed cells. After the sample procedure, the cell and DNA contents of DCBM decreased, the tensile modulus did not decrease significantly, and the DCBM had a pore structure and no obvious cytotoxicity. PBMSCs could adhere and grow on the scaffold. Under induction of TGF-β3, PBMSCs/DCBM composites expressed glycosaminoglycan (GAG), and the related gene expression also increased. The results of the in vivo experiments that the PBMSCs/DCBM group had a better repair effect than the DCBM group and the control group at both 12 and 24 weeks, and the protective effect on cartilage was also better. Therefore, the application of DCBM augmented with PBMSCs for meniscus injury treatment is a preferred option for tissue-engineered meniscus.

Decellularized extracellular matrix scaffolds: Recent trends and emerging strategies in tissue engineering

The application of scaffolding materials is believed to hold enormous potential for tissue regeneration. Despite the widespread application and rapid advance of several tissue-engineered scaffolds such as natural and synthetic polymer-based scaffolds, they have limited repair capacity due to the difficulties in overcoming the immunogenicity, simulating in-vivo microenvironment, and performing mechanical or biochemical properties similar to native organs/tissues. Fortunately, the emergence of decellularized extracellular matrix (dECM) scaffolds provides an attractive way to overcome these hurdles, which mimic an optimal non-immune environment with native three-dimensional structures and various bioactive components. The consequent cell-seeded construct based on dECM scaffolds, especially stem cell-recellularized construct, is considered an ideal choice for regenerating functional organs/tissues. Herein, we review recent developments in dECM scaffolds and put forward perspectives accordingly, with particular focus on the concept and fabrication of decellularized scaffolds, as well as the application of decellularized scaffolds and their combinations with stem cells (recellularized scaffolds) in tissue engineering, including skin, bone, nerve, heart, along with lung, liver and kidney.

Biomaterials and Meniscal Lesions: Current Concepts and Future Perspective

Menisci are crucial structures for knee homeostasis. After a meniscal lesion, the golden rule, now, is to save as much meniscus as possible; only the meniscus tissue that is identified as unrepairable should be excised, and meniscal sutures find more and more indications. Several different methods have been proposed to improve meniscal healing. They include very basic techniques, such as needling, abrasion, trephination and gluing, or more complex methods, such as synovial flaps, meniscal wrapping or the application of fibrin clots. Basic research of meniscal substitutes has also become very active in the last decades. The aim of this literature review is to analyze possible therapeutic and surgical options that go beyond traditional meniscal surgery: from scaffolds, which are made of different kind of polymers, such as natural, synthetic or hydrogel components, to new technologies, such as 3-D printing construct or hybrid biomaterials made of scaffolds and specific cells. These recent advances show that there is great interest in the development of new materials for meniscal reconstruction and that, with the development of new biomaterials, there will be the possibility of better management of meniscal injuries

Biosynthetic scaffolds for partial meniscal loss: A systematic review from animal models to clinical practice

Acute or degenerative meniscus tears are the most common knee lesions. Meniscectomy provides symptomatic relief and functional recovery only in the short- to mid-term follow-up but significantly increases the risk of osteoarthritis. For this reason, preserving the meniscus is key, although it remains a challenge. Allograft transplants present many disadvantages, so during the last 20 years preclinical and clinical research focused on developing and investigating meniscal scaffolds. The aim of this systematic review was to collect and evaluate all the available evidence on biosynthetic scaffolds for meniscus regeneration both in vivo and in clinical studies. Three databases were searched: 46 in vivo preclinical studies and 30 clinical ones were found. Sixteen natural, 15 synthetic, and 15 hybrid scaffolds were studied in vivo. Among them, only 2 were translated into clinic: the Collagen Meniscus Implant, used in 11 studies, and the polyurethane-based scaffold Actifit®, applied in 19 studies. Although positive outcomes were described in the short- to mid-term, the number of concurrent procedures and the lack of randomized trials are the major limitations of the available clinical literature. Few in vivo studies also combined the use of cells or growth factors, but these augmentation strategies have not been applied in the clinical practice yet. Current solutions offer a significant but incomplete clinical improvement, and the regeneration potential is still unsatisfactory. Building upon the overall positive results of these "old" technologies to address partial meniscal loss, further innovation is urgently needed in this field to provide patients better joint sparing treatment options.

Biofabrication of cell-free dual drug-releasing biomimetic scaffolds for meniscal regeneration

Regenerating the meniscus remains challenging because of its avascular, aneural, and alymphatic nature. Three-dimensional (3D) printing technology provides a promising strategy to fabricate biomimetic meniscal scaffolds with an anisotropic architecture, a proper biomechanical microenvironment, and bioactive components. Herein, 3D printing technology is adopted by coencapsulating chemokines (platelet-derived growth factor-BB, PDGF-BB) and small chondroinductive molecules (kartogenin, KGN) within biomimetic polycaprolactone/hydrogel composite scaffolds. The incorporated PDGF-BB is expected to promote endogenous stem cell homing, and KGN in poly(lactic-co-glycolic) acid microspheres is employed to target the chondrogenesis of resident mesenchymal stem cells (MSCs). First, we chose basic bioinks composed of gelatin methacrylamide and hyaluronic acid methacrylate and then incorporated four concentrations (0%, 0.5%, 1.0%, and 2.0%) of meniscal extracellular matrix into the bioink to systematically study the superiority of these combinations and identify the optimally printable bioink. Next, we investigated the scaffold morphology and drug release profile. The effects of releasing the drugs in a sequentially controlled manner from the composite scaffolds on the fate of MSCs were also evaluated. The biofabricated scaffolds, with and without dual drug loading, were further studied in a rabbit model established with a critical-size medial meniscectomy. We found that meniscal scaffolds containing both drugs had combinational advantages in enhancing cell migration and synergistically promoted MSC chondrogenic differentiation. The dual drug-loaded scaffolds also significantly promotedin vivoneomeniscal regeneration three and six months after implantation in terms of histological and immunological phenotypes. The results presented herein reveal that this 3D-printed dual drug-releasing meniscal scaffold possesses the potential to act as an off-the-shelf product for the clinical treatment of meniscal injury and related joint degenerative diseases.

Advances in electrospun scaffolds for meniscus tissue engineering and regeneration

The meniscus plays a critical role in maintaining the homeostasis, biomechanics, and structural stability of the knee joint. Unfortunately, it is predisposed to damages either from sports-related trauma or age-related degeneration. The meniscus has an inherently limited capacity for tissue regeneration. Self-healing of injured adult menisci only occurs in the peripheral vascularized portion, while the spontaneous repair of the inner avascular region seems never happens. Repair, replacement, and regeneration of menisci through tissue engineering strategies are promising to address this problem. Recently, many scaffolds for meniscus tissue engineering have been proposed for both experimental and preclinical investigations. Electrospinning is a feasible and versatile technique to produce nano- to micro-scale fibers that mimic the microarchitecture of native extracellular matrix and is an effective approach to prepare nanofibrous scaffolds for constructing engineered meniscus. Electrospun scaffolds are reported to be capable of inducing colonization of meniscus cells by modulating local extracellular density and stimulating endogenous regeneration by driving reprogramming of meniscus wound microenvironment. Electrospun nanofibrous scaffolds with tunable mechanical properties, controllable anisotropy, and various porosities have shown promises for meniscus repair and regeneration and will undoubtedly inspire more efforts in exploring effective therapeutic approaches towards clinical applications. In this article, we review the current advances in the use of electrospun nanofibrous scaffolds for meniscus tissue engineering and repair and discuss prospects for future studies.

Mg-BGNs/DCECM Composite Scaffold for Cartilage Regeneration: A Preliminary In Vitro Study

Cartilage lesions can lead to progressive cartilage degeneration; moreover, they involve the subchondral bone, resulting in osteoarthritis (OA) onset and progression. Bioactive glasses, with the dual function of supporting both bone and cartilage regeneration, have become a promising biomaterial for cartilage/bone engineering applications. This is especially true for those containing therapeutic ions, which act as ion delivery systems and may further promote cartilage repair. In this study, we successfully fabricated Mg-containing bioactive glass nanospheres (Mg-BGNs) and constructed three different scaffolds, DCECM, Mg-BGNs-1/DCECM (1% Mg-BGNs), and Mg-BGNs-2/DCECM (10% Mg-BGNs) scaffold, by incorporating Mg-BGNs into decellularized cartilage extracellular matrix (DCECM). All three scaffolds showed favorable microarchitectural and ion controlled-release properties within the ideal range of pore size for tissue engineering applications. Furthermore, all scaffolds showed excellent biocompatibility and no signs of toxicity. Most importantly, the addition of Mg-BGNs to the DCECM scaffolds significantly promoted cell proliferation and enhanced chondrogenic differentiation induction of mesenchymal stem cells (MSCs) in pellet culture in a dose-dependent manner. Collectively, the multifunctional Mg-BGNs/DCECM composite scaffold not only demonstrated biocompatibility but also a significant chondrogenic response. Our study suggests that the Mg-BGNs/DCECM composite scaffold would be a promising tissue engineering tool for osteochondral lesions, with the ability to simultaneously stimulate articular cartilage and subchondral bone regeneration.

A Versatile Surgical Method for Studying Meniscus Implantation in a Rabbit Model

Meniscus injury is a health problem that greatly affects people's quality of life. In recent years, the number of diagnosed meniscus injury is increasing year by year. If not treated in time and correctly, it causes severe damages to the cartilage. Owing to the meniscus' limited healing ability, synthetic/tissue-engineered meniscus has emerged as a new treatment modality in recent years. Rabbit models, which have been proved to be a feasible animal model, have been extensively used to study meniscus implantation. However, there is not a unified and minimally invasive surgical method for meniscus implantation in rabbits, and the current surgical methods have unsolved problems, such as long incisions, patella valgus, and cutting of the medial collateral ligament. Therefore, the goal of this study is to provide a minimally invasive and versatile meniscus implantation method. Compared with the control group, our study showed less trauma to the animal model, and we believe that it has the application significance on tissue-engineered meniscus implantation. Impact statement Meniscal injury is a central area of sports medicine research because of the high and increasing global rate. With its profound potential implications for patients' functions and the subsequent development of arthritis, there is a great need for the synthetic/tissue-engineered menisci. Animal meniscus implantation models allow studying meniscus implantation with synthetic/tissue-engineered meniscus, and the rabbit model is a gold method for meniscus implantation in the laboratory. However, there has not yet been a minimally invasive and versatile surgical technique describing this surgery method. This article, therefore, provides a detailed description of the rabbit meniscus implantation method, including step-by-step surgical instructions and accompanying pictures.

Meniscal Regenerative Scaffolds Based on Biopolymers and Polymers: Recent Status and Applications

Knee menisci are structurally complex components that preserve appropriate biomechanics of the knee. Meniscal tissue is susceptible to injury and cannot heal spontaneously from most pathologies, especially considering the limited regenerative capacity of the inner avascular region. Conventional clinical treatments span from conservative therapy to meniscus implantation, all with limitations. There have been advances in meniscal tissue engineering and regenerative medicine in terms of potential combinations of polymeric biomaterials, endogenous cells and stimuli, resulting in innovative strategies. Recently, polymeric scaffolds have provided researchers with a powerful instrument to rationally support the requirements for meniscal tissue regeneration, ranging from an ideal architecture to biocompatibility and bioactivity. However, multiple challenges involving the anisotropic structure, sophisticated regenerative process, and challenging healing environment of the meniscus still create barriers to clinical application. Advances in scaffold manufacturing technology, temporal regulation of molecular signaling and investigation of host immunoresponses to scaffolds in tissue engineering provide alternative strategies, and studies have shed light on this field. Accordingly, this review aims to summarize the current polymers used to fabricate meniscal scaffolds and their applications in vivo and in vitro to evaluate their potential utility in meniscal tissue engineering. Recent progress on combinations of two or more types of polymers is described, with a focus on advanced strategies associated with technologies and immune compatibility and tunability. Finally, we discuss the current challenges and future prospects for regenerating injured meniscal tissues.

3D Printed Poly(ε-Caprolactone)/Meniscus Extracellular Matrix Composite Scaffold Functionalized With Kartogenin-Releasing PLGA Microspheres for Meniscus Tissue Engineering

Meniscus tissue engineering (MTE) aims to fabricate ideal scaffolds to stimulate the microenvironment for recreating the damaged meniscal tissue. Indeed, favorable mechanical properties, suitable biocompatibility, and inherent chondrogenic capability are crucial in MTE. In this study, we present a composite scaffold by 3D printing a poly(ε-caprolactone) (PCL) scaffold as backbone, followed by injection with the meniscus extracellular matrix (MECM), and modification with kartogenin (KGN)-loaded poly(lactic-co-glycolic) acid (PLGA) microsphere (μS), which serves as a drug delivery system. Therefore, we propose a plan to improve meniscus regeneration via KGN released from the 3D porous PCL/MECM scaffold. The final results showed that the hydrophilicity and bioactivity of the resulting PCL/MECM scaffold were remarkably enhanced. In vitro synovium-derived mesenchymal stem cells (SMSCs) experiments suggested that introducing MECM components helped cell adhesion and proliferation and maintained promising ability to induce cell migration. Moreover, KGN-incorporating PLGA microspheres, which were loaded on scaffolds, showed a prolonged release profile and improved the chondrogenic differentiation of SMSCs during the 14-day culture. Particularly, the PCL/MECM-KGN μS seeded by SMSCs showed the highest secretion of total collagen and aggrecan. More importantly, the synergistic effect of the MECM and sustained release of KGN can endow the PCL/MECM-KGN μS scaffolds with not only excellent cell affinity and cell vitality preservation but also chondrogenic activity. Thus, the PCL/MECM-KGN μS scaffolds are expected to have good application prospects in the field of MTE.

Orchestrated cellular, biochemical, and biomechanical optimizations endow platelet-rich plasma-based engineered cartilage with structural and biomechanical recovery

Recently, biomaterials for cartilage regeneration has been intensively investigated. However, the development of scaffolds that capture regenerated cartilage with biomechanical and structural recovery has rarely been reported. To address this challenge, platelet-rich plasma (PRP)-based cartilage constructs with a well-orchestrated symphony of cellular, biochemical and biomechanical elements were prepared by simultaneously employing chondrogenic progenitor cells (CPCs) as a cell source, optimizing platelet concentration, and adding an enzyme-ion activator. It was shown that this triple-optimized PRP + CPC construct possessed increased biomechanical properties and suitable biochemical signals. The following in vitro study demonstrated that the triple-optimized PRP + CPC constructs generated cartilage-like tissue with higher expression levels of chondrogenic-specific markers, more deposition of cartilage-specific extracellular matrix (ECM), and greater biomechanical values than those of the other constructs. Twelve weeks after the construct was implanted in a cartilage defect in vivo, histological analysis, qPCR, and biomechanical tests collectively showed that the triple-optimized constructs yielded a more chondrocyte-like cell phenotype with a higher synthesis of Col-II and aggrecan. More importantly, the triple-optimized constructs facilitated cartilage regeneration with better biomechanical recovery than that of the other constructs. These results demonstrate the efficacy of the triple-optimization strategy and highlight the simplicity and potency of this PRP + CPC construct for cartilage regeneration.

•

Cartilage tissue engineering has been intensively investigated.

•

We designed a PRP-based construct with favorable cell source, reinforced scaffold and appropriate biofactors.

•

This designed construct can facilitate cartilage regeneration with biomechanical and structural recovery simultaneously.

•

The favorable performance of the proposed scaffolds highlights the triple-optimization strategy to improve cartilage engineering.

3D-printed cell-free PCL-MECM scaffold with biomimetic micro-structure and micro-environment to enhance in situ meniscus regeneration

Despite intensive effort was made to regenerate injured meniscus by cell-free strategies through recruiting endogenous stem/progenitor cells, meniscus regeneration remains a great challenge in clinic. In this study, we found decellularized meniscal extracellular matrix (MECM) preserved native meniscal collagen and glycosaminoglycans which could be a good endogenous regeneration guider for stem cells. Moreover, MECM significantly promoted meniscal fibrochondrocytes viability and proliferation, increased the expression of type II collagen and proteoglycans in vitro. Meanwhile, we designed 3D-printed polycaprolactone (PCL) scaffolds which mimic the circumferential and radial collagen orientation in native meniscus. Taken these two advantages together, a micro-structure and micro-environment dually biomimetic cell-free scaffold was manipulated. This cell-free PCL-MECM scaffold displayed superior biocompatibility and yielded favorable biomechanical capacities closely to native meniscus. Strikingly, neo-menisci were regenerated within PCL-MECM scaffolds which were transplanted into knee joints underwent medial meniscectomy in rabbits and sheep models. Histological staining confirmed neo-menisci showed meniscus-like heterogeneous staining. Mankin scores showed PCL-MECM scaffold could protect articular cartilage well, and knee X-ray examination revealed same results. Knee magnetic resonance imaging (MRI) scanning also showed some neo-menisci in PCL-MECM scaffold group. In conclusion, PCL-MECM scaffold appears to optimize meniscus regeneration. This could represent a promising approach worthy of further investigation in preclinical applications.

•

3D-printed PCL scaffolds could mimic the circumferential and radial collagen orientation in native meniscus.

•

PCL-MECM scaffold displayed superior biocompatibility and yielded favorable biomechanical capacities.

•

PCL-MECM scaffold appears to optimize meniscus regeneration in both rabbit and sheep meniscus repairing model.

•

PCL-MECM scaffold may represent a promising approach worthy of further investigation in preclinical applications.

Biofunctionalized Structure and Ingredient Mimicking Scaffolds Achieving Recruitment and Chondrogenesis for Staged Cartilage Regeneration

It remains scientifically challenging to regenerate injured cartilage in orthopedics. Recently, an endogenous cell recruitment strategy based on a combination of acellular scaffolds and chemoattractants to specifically and effectively recruit host cells and promote chondrogenic differentiation has brought new hope for in situ articular cartilage regeneration. In this study, a transforming growth factor-β3 (TGF-β3)-loaded biomimetic natural scaffold based on demineralized cancellous bone (DCB) and acellular cartilage extracellular matrix (ECM) was developed and found to improve chondral repair by enhancing cell migration and chondrogenesis. The DCB/ECM scaffold has porous microstructures (pore size: 67.76 ± 8.95 μm; porosity: 71.04 ± 1.62%), allowing the prolonged release of TGF-β3 (up to 50% after 42 days in vitro) and infrapatellar fat pad adipose-derived stem cells (IPFSCs) that maintain high cell viability (>96%) and favorable cell distribution and phenotype after seeding onto the DCB/ECM scaffold. The DCB/ECM scaffold itself can also provide a sustained release system to effectively promote IPFSC migration (nearly twofold in vitro). Moreover, TGF-β3 loaded on scaffolds showed enhanced chondrogenic differentiation (such as collagen II, ACAN, and SOX9) of IPFSCs after 3 weeks of culture. After implanting the composite scaffold into the knee joints of rabbits, enhanced chondrogenic differentiation was discovered at 1, 2, and 4 weeks post-surgery, and improved repair of cartilage defects in terms of biochemical, biomechanical, radiological, and histological results was identified at 3 and 6 months post-implantation. To conclude, our study demonstrates that the growth factor (GF)-loaded scaffold can facilitate cell homing, migration, and chondrogenic differentiation and promote the reconstructive effects of in vivo cartilage formation, revealing that this staged regeneration strategy combined with endogenous cell recruitment and pro-chondrogenesis is promising for in situ articular cartilage regeneration.

Enhancement of acellular cartilage matrix scaffold by Wharton's jelly mesenchymal stem cell-derived exosomes to promote osteochondral regeneration

Articular cartilage defect repair is a problem that has long plagued clinicians. Although mesenchymal stem cells (MSCs) have the potential to regenerate articular cartilage, they also have many limitations. Recent studies have found that MSC-derived exosomes (MSC-Exos) play an important role in tissue regeneration. The purpose of this study was to verify whether MSC-Exos can enhance the reparative effect of the acellular cartilage extracellular matrix (ACECM) scaffold and to explore the underlying mechanism. The results of in vitro experiments show that human umbilical cord Wharton's jelly MSC-Exos (hWJMSC-Exos) can promote the migration and proliferation of bone marrow-derived MSCs (BMSCs) and the proliferation of chondrocytes. We also found that hWJMSC-Exos can promote the polarization of macrophages toward the M2 phenotype. The results of a rabbit knee osteochondral defect repair model confirmed that hWJMSC-Exos can enhance the effect of the ACECM scaffold and promote osteochondral regeneration. We demonstrated that hWJMSC-Exos can regulate the microenvironment of the articular cavity using a rat knee joint osteochondral defect model. This effect was mainly manifested in promoting the polarization of macrophages toward the M2 phenotype and inhibiting the inflammatory response, which may be a promoting factor for osteochondral regeneration. In addition, microRNA (miRNA) sequencing confirmed that hWJMSC-Exos contain many miRNAs that can promote the regeneration of hyaline cartilage. We further clarified the role of hWJMSC-Exos in osteochondral regeneration through target gene prediction and pathway enrichment analysis. In summary, this study confirms that hWJMSC-Exos can enhance the effect of the ACECM scaffold and promote osteochondral regeneration.

•

hWJMSC-Exos can promote cell proliferation, migration and polarization in vitro.

•

hWJMSC-Exos can enhance the repair effect of ACECM scaffold in vivo.

•

hWJMSC-Exos can inhibit inflammation in the joint cavity.

•

hWJMSC-Exos contain a variety of miRNAs that promote osteochondral regeneration.

Hierarchical macro-microporous WPU-ECM scaffolds combined with Microfracture Promote in Situ Articular Cartilage Regeneration in Rabbits

Tissue engineering provides a promising avenue for treating cartilage defects. However, great challenges remain in the development of structurally and functionally optimized scaffolds for cartilage repair and regeneration. In this study, decellularized cartilage extracellular matrix (ECM) and waterborne polyurethane (WPU) were employed to construct WPU and WPU-ECM scaffolds by water-based 3D printing using low-temperature deposition manufacturing (LDM) system, which combines rapid deposition manufacturing with phase separation techniques. The scaffolds successfully achieved hierarchical macro‐microporous structures. After adding ECM, WPU scaffolds were markedly optimized in terms of porosity, hydrophilia and bioactive components. Moreover, the optimized WPU-ECM scaffolds were found to be more suitable for cell distribution, adhesion, and proliferation than the WPU scaffolds. Most importantly, the WPU-ECM scaffold could facilitate the production of glycosaminoglycan (GAG) and collagen and the upregulation of cartilage-specific genes. These results indicated that the WPU-ECM scaffold with hierarchical macro‐microporous structures could recreate a favorable microenvironment for cell adhesion, proliferation, differentiation, and ECM production. In vivo studies further revealed that the hierarchical macro‐microporous WPU-ECM scaffold combined with the microfracture procedure successfully regenerated hyaline cartilage in a rabbit model. Six months after implantation, the repaired cartilage showed a similar histological structure and mechanical performance to that of normal cartilage. In conclusion, the hierarchical macro‐microporous WPU-ECM scaffold may be a promising candidate for cartilage tissue engineering applications in the future.

•

Hierarchical macro‐microporous scaffolds could be fabricated by low-temperature deposition manufacturing.

•

Waterborne polyurethane (WPU) scaffolds were optimized by adding decellularized cartilage extracellular matrix (ECM).

•

The WPU-ECM scaffold provided a suitable microenvironment for cell attachment, proliferation, and differentiation in vitro.

•

The paradigm of WPU-ECM scaffold and microfracture (MF) has great potential for clinical application in cartilage repair.

3D bioprinting of a biomimetic meniscal scaffold for application in tissue engineering

Appropriate biomimetic scaffolds created via 3D bioprinting are promising methods for treating damaged menisci. However, given the unique anatomical structure and complex stress environment of the meniscus, many studies have adopted various techniques to take full advantage of different materials, such as the printing combined with infusion, or electrospining, to chase the biomimetic meniscus, which makes the process complicated to some extent. Some researchers have tried to tackle the challenges only by 3D biopringting, while its alternative materials and models have been constrained. In this study, based on a multilayer biomimetic strategy, we optimized the preparation of meniscus-derived bioink, gelatin methacrylate (GelMA)/meniscal extracellular matrix (MECM), to take printability and cytocompatibility into account together. Subsequently, a customized 3D bioprinting system featuring a dual nozzle + multitemperature printing was used to integrate the advantages of polycaprolactone (PCL) and meniscal fibrocartilage chondrocytes (MFCs)-laden GelMA/MECM bioink to complete the biomimetic meniscal scaffold, which had the best biomimetic features in terms of morphology and components. Furthermore, cell viability, mechanics, biodegradation and tissue formation in vivo were performed to ensure that the scaffold had sufficient feasibility and functionality, thereby providing a reliable basis for its application in tissue engineering.

•

We have optimized the preparation of meniscus-derived bioink with good printability and cytocompatibility.

•

A customized printing system for biomimetic meniscus, the dual-nozzle + multitemperature printing system was developed.

•

We have achieved multilayer meniscal biomimetic strategy, especially the best biomimetics of morphology and components.

•

Focusing on application prospect, we designed a few experiments to verity the feasibility and functionality of the scaffold.

Advanced Polymer-Based Drug Delivery Strategies for Meniscal Regeneration

The meniscus plays a critical role in maintaining knee joint homeostasis. Injuries to the meniscus, especially considering the limited self-healing capacity of the avascular region, continue to be a challenge and are often treated by (partial) meniscectomy, which has been identified to cause osteoarthritis. Currently, meniscus tissue engineering focuses on providing extracellular matrix (ECM)-mimicking scaffolds to direct the inherent meniscal regeneration process, and it has been found that various stimuli are essential. Numerous bioactive factors present benefits in regulating cell fate, tissue development, and healing, but lack an optimal delivery system. More recently, bioengineers have developed various polymer-based drug delivery systems (PDDSs), which are beneficial in terms of the favorable properties of polymers as well as novel delivery strategies. Engineered PDDSs aim to provide not only an ECM-mimicking microenvironment but also the controlled release of bioactive factors with release profiles tailored according to the biological concerns and properties of the factors. In this review, both different polymers and bioactive factors involved in meniscal regeneration are discussed, as well as potential candidate systems, with examples of recent progress. This article aims to summarize drug delivery strategies in meniscal regeneration, with a focus on novel delivery strategies rather than on specific delivery carriers. The current challenges and future prospects for the structural and functional regeneration of the meniscus are also discussed. Impact statement Meniscal injury remains a clinical Gordian knot owing to the limited healing potential of the region, restricted surgical approaches, and risk of inducing osteoarthritis. Existing tissue engineering scaffolds that provide mechanical support and a favorable microenvironment also lack biological cues. Advanced polymer-based delivery strategies consisting of polymers incorporating bioactive factors have emerged as a promising direction. This article primarily reviews the types and applications of biopolymers and bioactive factors in meniscal regeneration. Importantly, various carrier systems and drug delivery strategies are discussed with the hope of inspiring further advancements in this field.

PCL-MECM-Based Hydrogel Hybrid Scaffolds and Meniscal Fibrochondrocytes Promote Whole Meniscus Regeneration in a Rabbit Meniscectomy Model

Regeneration of an injured meniscus continues to be a scientific challenge due to its poor self-healing potential. Tissue engineering provides an avenue for regenerating a severely damaged meniscus. In this study, we first investigated the superiority of five concentrations (0%, 0.5%, 1%, 2%, and 4%) of meniscus extracellular matrix (MECM)-based hydrogel in promoting cell proliferation and the matrix-forming phenotype of meniscal fibrochondrocytes (MFCs). We found that the 2% group strongly enhanced chondrogenic marker mRNA expression and cell proliferation compared to the other groups. Moreover, the 2% group showed the highest glycosaminoglycan (GAG) and collagen production by day 14. We then constructed a hybrid scaffold by 3D printing a wedge-shaped poly(ε-caprolactone) (PCL) scaffold as a backbone, followed by injection with the optimized MECM-based hydrogel (2%), which served as a cell delivery system. The hybrid scaffold (PCL-hydrogel) clearly yielded favorable biomechanical properties close to those of the native meniscus. Finally, PCL scaffold, PCL-hydrogel, and MFCs-loaded hybrid scaffold (PCL-hydrogel-MFCs) were implanted into the knee joints of New Zealand rabbits that underwent total medial meniscectomy. Six months postimplantation we found that the PCL-hydrogel-MFCs group exhibited markedly better gross appearance and cartilage protection than the PCL scaffold and PCL-hydrogel groups. Moreover, the regenerated menisci in the PCL-hydrogel-MFCs group had similar histological structures, biochemical contents, and biomechanical properties as the native menisci in the sham operation group. In conclusion, PCL-MECM-based hydrogel hybrid scaffold seeded with MFCs can successfully promote whole meniscus regeneration, and cell-loaded PCL-MECM-based hydrogel hybrid scaffold may be a promising strategy for meniscus regeneration in the future.

Three-Dimensional Porous Scaffolds with Biomimetic Microarchitecture and Bioactivity for Cartilage Tissue Engineering

Ideal tissue-engineering cartilage scaffolds should possess the same nanofibrous structure as the microstructure of native cartilage as well as the same biological function provided by the microenvironment for neocartilage regeneration. In the present study, three-dimensional composite biomimetic scaffolds with different concentration ratios of electrospun gelatin-polycaprolactone (gelatin-PCL) nanofibers and decellularized cartilage extracellular matrix (DCECM) were fabricated. The nanofibers with the biomimetic microarchitecture of native cartilage served as a skeleton with excellent mechanical properties, and the DCECM served as a biological functionalization platform for the induction of cell response and the promotion of cartilage regeneration. Experimental results showed that the composite nanofiber/DCECM (NF/DCECM) scaffolds had stronger mechanical properties and structural stability in wet state compared with those of DCECM scaffolds. In vitro experiments demonstrated that all scaffolds had good biocompatibility, but the chondrocyte proliferation rate of the composite NF/DCECM scaffolds was higher than that of the NF scaffolds. In vitro and in vivo cartilage regeneration results indicated that the DCECM component of the composite scaffolds facilitated early maturation of the cartilage lacuna and the secretion of collagen and glycosaminoglycan. The macroscopic and histological results at 12 weeks postsurgery exhibited that the composite NF/DCECM scaffolds yielded better cartilage repair outcomes than those of the nontreated group and NF scaffolds group. Overall, the present study demonstrated that the structurally and functionally biomimetic NF/DCECM scaffold is a promising tissue engineering scaffold for cartilage regeneration and cartilage defect repair.

[Research progress of scaffold materials for tissue engineered meniscus]

OBJECTIVE

To summarize and analyze the research progress of scaffold materials used in tissue engineered meniscus.

METHODS

The classification and bionics design of scaffold materials were summarized by consulting domestic and foreign literature related to the research of tissue engineered meniscus in recent years.

RESULTS

Tissue engineered meniscus scaffolds can be roughly classified into synthetic polymers, hydrogels, extracellular matrix components, and tissue derived materials. These different materials have different characteristics, so the use of a single material has its unique disadvantages, and the use of a variety of materials composite scaffolds can learn from each other, which is a hot research area at present. In addition to material selection, material processing methods are also the focus of research. At the same time, according to the morphological structure and mechanical characteristics of the meniscus, the bionic design of tissue engineered meniscus scaffolds has great potential.

CONCLUSION

At present, there are many kinds of scaffold materials for tissue engineered meniscus. However, there is no material that can completely simulate the natural meniscus, and further research of scaffold materials is still needed.

Development of decellularized meniscus extracellular matrix and gelatin/chitosan scaffolds for meniscus tissue engineering

BACKGROUND

Meniscus tissue engineering has provided a great potential treatment for meniscal injuries. However, few scaffolds in meniscus tissue engineering have matched the mechanical properties of native meniscus.

OBJECTIVE

In this study, we developed a composite scaffold using decellularized meniscus extracellular matrix (DMECM) and gelatin/chitosan (G/C) to explore a preferable ratio to enhance the elastic modulus and cytotoxicity properties of scaffolds.

METHODS

The microstructure, porosity, cytotoxicity, and strength of the composite scaffolds were evaluated. The micro-architectures of the samples were evaluated using scanning electron microscope (SEM). Fourier Transform Infrared analysis (FTIR) was used to confirm the chemical structure with different type composite scaffolds. The compressive elastic modulus of all the scaffolds were measured by the universal tensile testing machine DNS300. Calcein-AM (fluorescent green) and propidium iodide (fluorescent red) were used to stain live cells and dead cells. Morphology and spatial distribution of cells within scaffolds were observed by confocal laser scanning microscopy FV 1000.

RESULTS

SEM showed that the composite scaffolds had suitable porous structure. CCK-8 and live/dead staining demonstrated that the composite scaffolds had no cytotoxicity and could promote bone marrow mesenchymal stem cells (BMSCs) proliferation. The FTIR results demonstrated the successful mixing of these two elements, and the addition of DMECM improved the elastic modulus and cytotoxicity of G/C composite scaffolds.

CONCLUSIONS

This study developed a composite scaffold using DMECM and G/C, and demonstrated that it might be suitable for meniscal tissue engineering application.

Platelet-rich gel-incorporated silk scaffold promotes meniscus regeneration in a rabbit total meniscectomy model

Aim: To investigate whether platelet-rich gel (PRG) incorporation could promote meniscal regeneration of the silk scaffold. Materials & methods: A PRG-incorporated silk sponge was fabricated for reconstruction of the meniscus in a rabbit meniscectomy model. Subsequently, characterization of the scaffold, as well as the in vitro cytocompatibility and in vivo function was evaluated. Results: Our results showed that the PRG-incorporated silk scaffold provided a sustained release of TGF-β1 over 1 week. The PRG enhanced the cytocompatibility in vitro and cell infiltration in vivo of the silk sponge. Meanwhile, the implantation of the composite in situ ameliorated the cartilage degeneration in knee at 3 months. Conclusion: These findings indicated that PRG-incorporated silk scaffold could promote functional regeneration of the meniscus and effectively prevented subsequent osteoarthritis after meniscectomy.

Chondrogenic Progenitor Cells Exhibit Superiority Over Mesenchymal Stem Cells and Chondrocytes in Platelet-Rich Plasma Scaffold-Based Cartilage Regeneration

BACKGROUND

Platelet-rich plasma (PRP) has been considered a promising tool for cartilage regeneration. However, increasing evidence has demonstrated the controversial effects of PRP on tissue regeneration, partially due to the unsatisfactory cell source. Chondrogenic progenitor cells (CPCs) have gained increasing attention as a potential cell source due to their self-renewal and multipotency, especially toward the chondrogenic lineage, and, thus, may be an appropriate alternative for cartilage engineering.

PURPOSE

To compare the effects of PRP on CPC, mesenchymal stem cell (MSC), and chondrocyte proliferation, chondrogenesis, and cartilage regeneration.

STUDY DESIGN

Controlled laboratory study.

METHODS

Whole blood samples were obtained from 5 human donors to create PRPs (0, 1000 × 10⁹, and 2000 × 10⁹ platelets per liter). The proliferation and chondrogenesis of CPCs, bone marrow-derived MSCs (BMSCs), and chondrocytes were evaluated via growth kinetic and CCK-8 assays. Immunofluorescence, cytochemical staining, and gene expression analyses were performed to assess chondrogenic differentiation and cartilaginous matrix formation. The in vivo effects of CPCs, BMSCs, and chondrocytes on cartilage regeneration after PRP treatment were measured by use of histopathological, biochemical, and biomechanical techniques in a cartilage defect model involving mature male New Zealand White rabbits (critical size, 5 mm).

RESULTS

The CPCs possessed migration abilities and proliferative capacities superior to those of the chondrocytes, while exhibiting a chondrogenic predisposition stronger than that of the BMSCs. The growth kinetic, CCK-8, cytochemical staining, and biochemical analyses revealed that the CPCs simultaneously displayed a higher cell density than the chondrocytes and stronger chondrogenesis than the BMSCs after PRP stimulation. In addition, the in vivo study demonstrated that the PRP+CPC construct yielded better histological (International Cartilage Repair Society [ICRS] score, mean ± SEM, 1197.2 ± 163.2) and biomechanical (tensile modulus, 1.523 ± 0.194) results than the PRP+BMSC (701.1 ± 104.9, P < .05; 0.791 ± 0.151, P < .05) and PRP+chondrocyte (541.6 ± 98.3, P < .01; 0.587 ± 0.142, P < .01) constructs at 12 weeks after implantation.

CONCLUSION

CPCs exhibit superiority over MSCs and chondrocytes in PRP scaffold-based cartilage regeneration, and PRP+CPC treatment may be a favorable strategy for cartilage repair.

CLINICAL RELEVANCE

These findings provide evidence highlighting the preferable role of CPCs as a cell source in PRP-mediated cartilage regeneration and may help researchers address the problem of unsatisfactory cell sources in cartilage engineering.

Suturable regenerated silk fibroin scaffold reinforced with 3D-printed polycaprolactone mesh: biomechanical performance and subcutaneous implantation

The menisci have crucial roles in the knee, chondroprotection being the primary. Meniscus repair or substitution is favored in the clinical management of the meniscus lesions with given indications. The outstanding challenges with the meniscal scaffolds include the required biomechanical behavior and features. Suturability is one of the prerequisites for both implantation and implant survival. Therefore, we proposed herein a novel highly interconnected suturable porous scaffolds from regenerated silk fibroin that is reinforced with 3D-printed polycaprolactone (PCL) mesh in the middle, on the transverse plane to enhance the suture-holding capacity. Results showed that the reinforcement of the silk fibroin scaffolds with the PCL mesh increased the suture retention strength up to 400%, with a decrease in the mean porosity and an increase in crystallinity from 51.9 to 55.6%. The wet compression modulus values were significantly different for silk fibroin, and silk fibroin + PCL mesh by being 0.16 ± 0.02, and 0.40 ± 0.06 MPa, respectively. Both scaffolds had excellent interconnectivity (>99%), and a high water uptake feature (>500%). The tissue's infiltration and formation of new blood vessels were assessed by means of performing an in vivo subcutaneous implantation of the silk fibroin + PCL mesh scaffolds that were seeded with primary human meniscocytes or stem cells. Regarding suturability and in vivo biocompatibility, the findings of this study indicate that the silk fibroin + PCL mesh scaffolds are suitable for further studies to be carried out for meniscus tissue engineering applications such as the studies involving orthotopic meniscal models and fabrication of patient-specific implants.

Biomechanical Stimulus Based Strategies for Meniscus Tissue Engineering and Regeneration

Meniscus injuries are very common in the knee joint. Treating a damaged meniscus continues to be a scientific challenge in sport medicine because of its poor self-healing potential and few clinical therapeutic options. Tissue engineering strategies are very promising solutions for repairing and regenerating a damaged meniscus. Meniscus is exposed to a complex biomechanical microenvironment, and it plays a crucial role in meniscal development, growth, and repairing. Over the past decades, increasing attention has been focused on the use of biomechanical stimulus to enhance biomechanical properties of the engineered meniscus. Further understanding the influence of mechanical stimulation on cell proliferation and differentiation, metabolism, relevant gene expression, and pro/anti-inflammatory responses may be beneficial to enhance meniscal repair and regeneration. On the one hand, this review describes some basic information about meniscus; on the other hand, we sum up the various biomechanical stimulus based strategies applied in meniscus tissue engineering and how these factors affect meniscal regeneration. We hope this review will provide researchers with inspiration on tissue engineering strategies for meniscus regeneration in the future.

Cell-Free Strategies for Repair and Regeneration of Meniscus Injuries through the Recruitment of Endogenous Stem/Progenitor Cells

The meniscus plays a vital role in protecting the articular cartilage of the knee joint. The inner two-thirds of the meniscus are avascular, and injuries to this region often fail to heal without intervention. The use of tissue engineering and regenerative medicine techniques may offer novel and effective approaches to repairing meniscal injuries. Meniscal tissue engineering and regenerative medicine typically use one of two techniques, cell-based or cell-free. While numerous cell-based strategies have been applied to repair and regenerate meniscal defects, these techniques possess certain limitations including cellular contamination and an increased risk of disease transmission. Cell-free strategies attempt to repair and regenerate the injured tissues by recruiting endogenous stem/progenitor cells. Cell-free strategies avoid several of the disadvantages of cell-based techniques and, therefore, may have a wider clinical application. This review first compares cell-based to cell-free techniques. Next, it summarizes potential sources for endogenous stem/progenitor cells. Finally, it discusses important recruitment factors for meniscal repair and regeneration. In conclusion, cell-free techniques, which focus on the recruitment of endogenous stem and progenitor cells, are growing in efficacy and may play a critical role in the future of meniscal repair and regeneration.

Cross-linked electrospun cartilage acellular matrix/poly(caprolactone-co-lactide-co-glycolide) nanofiber as an antiadhesive barrier

In this work, we chose cartilage acellular matrix (CAM) as a promising antiadhesive material because CAM effectively inhibits the formation of blood vessels, and we used electrospinning to prepare antiadhesive barriers. Additionally, we synthesized N-hydroxysuccinimide (NHS)-poly(caprolactone-co-lactide-co-glycolide)-NHS (MP) copolymers (to tune degradation) as a cross-linking agent for CAM. This is the first report on the development of electrospun cross-linked (Cx) CAM/MP (CA/P) nanofiber (NF) (Cx-CA/P-NF) with a tunable degradation period as an antiadhesive barrier. Compared with the CA/P-NF before cross-linking, the electrospun Cx-CA/P-NF after cross-linking showed different biodegradation. Cx-CA/P-NF significantly inhibited the in vitro attachment and proliferation of human umbilical vein endothelial cells (HUVECs), as confirmed by an MTT assay and scanning electron microscopy images. Cx-CA/P-NFs implanted between a surgically damaged peritoneal wall and cecum gradually degraded in 7 days; this process was monitored by NIR imaging. The in vivo evaluation of the anti-tissue adhesive effect of Cx-CA/P-NFs revealed little adhesion, few blood vessels, and negligible inflammation at 7 days determined by hematoxylin and eosin staining. ED1 staining of Cx-CA/P-NFs showed infiltration of few macrophages because of the inflammatory response to the Cx-CA/P-NF as compared with an untreated injury model. Additionally, Cx-CA/P-NFs significantly suppressed the formation of blood vessels between the peritoneal wall and cecum, according to CD31 staining. Overall, Cx-CA/P-NFs yielded little adhesion, infiltration by macrophages, or formation of blood vessels in a postoperative antiadhesion assay. Thus, it is reasonable to conclude that the Cx-CA/P-NF designed herein successfully works as an antiadhesive barrier with a tunable degradation period.

STATEMENT OF SIGNIFICANCE

The cartilage acellular matrix (CAM) can inhibit the formation of fibrous tissue bridges and blood vessels between the tissue at an injured site and the surrounding healthy tissues. However, CAM has not been rigorously investigated as an antiadhesive barrier. In this manuscript, the cross-linked CAM nanofiber (Cx-CA/P-NF) designed herein successfully works as an antiadhesive barrier. Cx-CA/P-NFs yielded little adhesion, infiltration by macrophages, or formation of blood vessels in a postoperative antiadhesion assay. Moreover, we demonstrated the suitable properties of Cx-CA/P-NF such as easy cross-linking by maintaining the antiadhesive properties, controllable biodegradation, and in vivo antiadhesive effect of Cx-CA/P-NF.

An electrospun fiber reinforced scaffold promotes total meniscus regeneration in rabbit meniscectomy model

Low vascularization in meniscus limits its regeneration ability after injury, and tissue engineering is the most promising method to achieve meniscus regeneration. In this study, we fabricated a kind of composite scaffold by decellularized meniscus extracellular matrix/polycaprolactone (DMECM/PCL) electrospinning fibers and porous DMECM, in which DMECM/PCL fibers were used as reinforcing component. The tensile modulus of the composite scaffold in longitudinal and crosswise directions were 8.5 ± 1.9 and 2.3 ± 0.3 MPa, respectively. Besides that, the DMECM/PCL electrospinning fibers enhanced suture resistance of the composite scaffold more than 5 times than DMECM scaffold effectively. In vitro cytocompatibility showed that the porous structure provided by DMECM component facilitated meniscus cells' proliferation. DMECM was also the main component to regulate cell behaviors, which promoted meniscus cells expressing extracellular matrix related genes such as COL I, COL II, SOX9 and AGG. Rabbits with total meniscectomy were used as animal model to evaluated the composited scaffolds performance in vivo at 3 and 6 months. Results showed that rabbits with scaffold implanting could regenerate neo-menisci in both time points. The neo-menisci had similar histology structure and biochemical content with native menisci. Although neo-menisci had inferior tensile modulus than native ones, its modulus was improved with implanting time prolonging. MRI imaging showed the signal of neo-meniscus in the body is clear, and X-ray imaging of knee joints demonstrated the implantation of scaffolds could relief joint space narrowing. Moreover, rabbits with neo-menisci had better cartilage condition in femoral condyle and tibial plateau compared than meniscectomy group.

STATEMENT OF SIGNIFICANCE

We fabricated the meniscus scaffold by combining porous decellularized meniscus extracellular matrix (DMECM) and DMECM/PCL electrospinning fibers together, which used the porous structure of DMECM, and the good tensile property of electrospinning fibers. We believe single material cannot satisfy increasing needs of scaffold. Therefore, we combined not only materials but also fabrication methods together to develop scaffold to make good use of each part. DMECM in electrospinning fibers also made these two components possible to be integrated through crosslinking. Compared to existing meniscus scaffold, the composite scaffold had (1) soft structure and extrusion would not happen after implantation, (2) ability to be trimmed to suitable shape during surgery, and (3) good resistance to suture.

Human Knee Meniscus Regeneration Strategies: a Review on Recent Advances

PURPOSE OF REVIEW

Lack of vascularity in the human knee meniscus often leads to surgical removal (total or partial meniscectomy) in the case of severe meniscal damage. However, complete recovery is in question after such removal as the meniscus plays an important role in knee stability. Thus, meniscus tissue regeneration strategies are of intense research interest in recent years.

RECENT FINDINGS

The structural complexity and inhomogeneity of the meniscus have been addressed with processing technologies for precisely controlled three dimensional (3D) complex porous scaffold architectures, the use of biomolecules and nanomaterials. The regeneration and replacement of the total meniscus have been studied by the orthopedic and scientific communities via successful pre-clinical trials towards mimicking the biomechanical properties of the human knee meniscus. Researchers have attempted different regeneration strategies which contribute to in vitro regeneration and are capable of repairing meniscal tears to some extent. This review discusses the present state of the art of these meniscus tissue engineering aspects.

* The Ovine Model for Meniscus Tissue Engineering: Considerations of Anatomy, Function, Implantation, and Evaluation

Meniscus injuries represent one of the most-common intra-articular knee injuries. The current treatment options include meniscectomy and allograft transplantation, both with poor long-term outcomes. Therefore, there is a need for regenerative techniques to restore meniscal function. To preclinically test scaffolds for meniscus replacement, large animal models need to be established and standardized. This review establishes the anatomical and compositional similarities between human and sheep menisci and provides guidance for implantation and evaluation of such devices. The ovine meniscus represents a scaled-down version of the human meniscus, with only slight structural differences that can be addressed during device fabrication. Implantation protocols in sheep remain a challenge, as the meniscus cannot be visualized with the arthroscopic-assisted procedures commonly performed in human patients. Thus, we recommend the appropriate implantation protocols for meniscus visualization, ligamentous restoration, and surgical fixation of both total and partial meniscus replacement devices. Last, due to the lack of standardization in evaluation techniques, we recommend a comprehensive battery of tests to evaluate the efficacy of meniscus replacement implants. We recommend other investigators utilize these surgical and testing techniques to establish the ovine model as the gold standard for preclinical evaluation of meniscus replacement devices.

Regeneration of meniscus tissue using adipose mesenchymal stem cells-chondrocytes co-culture on a hybrid scaffold: In vivo study

The meniscus has poor intrinsic regenerative capacity and its damage inevitably leads to articular cartilage degeneration. We focused on evaluating the effects of Polyvinyl alcohol/Chitosan (PVA/Ch) scaffold seeded by adipose-derived mesenchymal stem cell (ASC) and articular chondrocytes (AC) in meniscus regeneration. The PVA/Ch scaffolds with different molar contents of Ch (Ch1, Ch2, Ch4 and Ch8) were cross-linked by pre-polyurethane chains. By increasing amount of Ch tensile modulus was increased from 83.51 MPa for Ch1 to 110 MPa for Ch8 while toughness showed decrease from 0.33 mJ/mm³ in Ch1 to 0.11 mJ/mm³ in Ch8 constructs. Moreover, swelling ratio and degradation rate increased with an increase in Ch amount. Scanning electron microscopy imaging was performed for pore size measurement and cell attachment. At day 21, Ch4 construct seeded by AC showed the highest expression with 24.3 and 22.64 folds increase in collagen II and aggrecan (p ≤ 0.05), respectively. Since, the mechanical properties, water uptake and degradation rate of Ch4 and Ch8 compositions had no statistically significant differences, Ch4 was selected for in vivo study. New Zealand rabbits were underwent unilateral total medial meniscectomy and AC/scaffold, ASC/scaffold, AC-ASC (co-culture)/scaffold and cell-free scaffold were engrafted. At 7 months post-implantation, macroscopic, histologic, and immunofluorescent studies for regenerated meniscus revealed better results in AC/scaffold group followed by AC-ASC/scaffold and ASC/scaffold groups. In the cell-free scaffold group, there was no obvious meniscus regeneration. Articular cartilages were best preserved in AC/scaffold group. The best histological score was observed in AC/scaffold group. Our results support that Ch4 scaffold seeded by AC alone can successfully regenerate meniscus in tearing injury and ASC has no significant contribution in the healing process.

Fabrication and characterization of electrospun nanofibers composed of decellularized meniscus extracellular matrix and polycaprolactone for meniscus tissue engineering

Decellularized meniscus extracellular matrix (DMECM) and polycaprolactone (PCL) were electrospun into nanofibers to make meniscus scaffolds with good mechanical properties.

[Effect of HBP-A on meniscal injury and pathological hypertrophy and calcification of the meniscus]

OBJECTIVE

To investigate the effect of HBP-A on meniscal injuries and the expressions of genes associated with pathological hypertrophy and calcification of the meniscusinduced by abnormal loading.

METHODS

Bovine meniscus explants were subjected to 25% strain at 0.3 Hz for 3 h and treated with 0.6 mg/mL of HBP-A. The cell viability in the meniscus explants after 72 hin culture was determined using live/dead staining and the expression levels of genes associated with pathological hypertrophy and calcification of the meniscus (ANKH, ENPP1, ALP, MMP13, and IL-1) were measured using real-time PCR and Western blotting. The conditioned medium was collected for testing sulfated glycosaminoglycan (GAG) release.

RESULTS

The number of dead cells, loss of proteoglycan content, and the expressions of ANKH, ENPP1, ALP and MMP13, and IL-1 at both the mRNA and protein levels were all significantly lower in the meniscus explants treated with 0.6 mg/mL HBP-A than in the explants with only 25% abnormal pressure stimulation (n=3, P<0.05).

CONCLUSION

HBP-A can effectively alleviate meniscal injuries induced by abnormal loading and suppress the expressions of genes related with pathological hypertrophy and calcification of the meniscus, and can serve as a potential drug for treatment of knee osteoarthritis.