Localized mandibular infection affects remote in vivo bioreactor bone generation

The potential of sheep in preclinical models for bone infection research - A systematic review

Background

Reliable animal models are critical for preclinical research and should closely mimic the disease. With respect to route of infection, pathogenic agent, disease progression, clinical signs, and histopathological changes. Sheep have similar bone micro- and macrostructure as well as comparable biomechanical characteristics to humans. Their use in bone research is established, however their use in bone infection research is limited. This systematic review will summarise the key features of the available bone infection models using sheep, providing a reference for further development, validation, and application.

Method

This systematic review was designed according to the PRISMA guidelines and registered with PROSPERO. Quality was assessed using SYRICLE's risk of bias tool adapted for animal studies. PubMed, MEDLINE, Web of Science and EMBASE were searched until March 2022.1921 articles were screened by two independent reviewers, and 25 were included for analysis.

Results

Models have been developed in nine different breeds. Staphylococcus aureus was used in the majority of models, typically inoculating 108 colony forming units in tibial or femoral cortical defects. Infection was established with either planktonic or biofilm adherent bacteria, with or without foreign material implanted. Most studies used both radiological and microbiological analyses to confirm osteomyelitis.

Conclusions

There is convincing evidence supporting the use of sheep in bone infection models of clinical disease. The majority of sheep studied demonstrated convincing osteomyelitis and tolerated the infection with minimal complications. Furthermore, the advantages of comparable biology and biomechanics may increase the success for translating in vivo results to successful therapies.

The Translational potential of this article

In the realm of preclinical research, the translation to viable clinical therapies is often perilous, and the quest for reliable and representative animal models remains paramount. This systematic review accentuates the largely untapped potential of sheep as large animal models, especially in bone infection research. The anatomical and biomechanical parallels between sheep and human bone structures position sheep as an invaluable asset for studying osteomyelitis and periprosthetic joint infection. This comprehensive exploration of the literature demonstrates the robustness and translational promise of these models. Furthermore, this article underscores the potential applicability for sheep in developing effective therapeutic strategies for human bone infections.

Establishment of a mandible defect model in rabbits infected with multiple bacteria and bioinformatics analysis

Objective: A model of chronic infectious mandibular defect (IMD) caused by mixed infection with Staphylococcus aureus and Pseudomonas aeruginosa was established to explore the occurrence and development of IMD and identify key genes by transcriptome sequencing and bioinformatics analysis. Methods: S. aureus and P. aeruginosa were diluted to 3 × 108 CFU/mL, and 6 × 3 × 3 mm defects lateral to the Mandibular Symphysis were induced in 28 New Zealand rabbits. Sodium Morrhuate (0.5%) and 50 μL bacterial solution were injected in turn. The modeling was completed after the bone wax closed; the effects were evaluated through postoperative observations, imaging and histological analyses. Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway, and protein‒protein interaction (PPI) network analyses were performed to investigate the function of the differentially expressed genes (DEGs). Results: All rabbits showed characteristics of infection. The bacterial cultures were positive, and polymerase chain reaction (PCR) was used to identify S. aureus and P. aeruginosa. Cone beam CT and histological analyses showed inflammatory cell infiltration, pus formation in the medullary cavity, increased osteoclast activity in the defect area, and blurring at the edge of the bone defect. Bioinformatics analysis showed 1,804 DEGs, 743 were upregulated and 1,061 were downregulated. GO and KEGG analyses showed that the DEGs were enriched in immunity and osteogenesis inhibition, and the core genes identified by the PPI network were enriched in the Hedgehog pathway, which plays a role in inflammation and tissue repair; the MEF2 transcription factor family was predicted by IRegulon. Conclusion: By direct injection of bacterial solution into the rabbit mandible defect area, the rabbit chronic IMD model was successfully established. Based on the bioinformatics analysis, we speculate that the Hedgehog pathway and the MEF2 transcription factor family may be potential intervention targets for repairing IMD.

Choosing the right animal model for osteomyelitis research: Considerations and challenges

Osteomyelitis is a debilitating bone disorder characterized by an inflammatory process involving the bone marrow, bone cortex, periosteum, and surrounding soft tissue, which can ultimately result in bone destruction. The etiology of osteomyelitis can be infectious, caused by various microorganisms, or noninfectious, such as chronic nonbacterial osteomyelitis (CNO) and chronic recurrent multifocal osteomyelitis (CRMO). Researchers have turned to animal models to study the pathophysiology of osteomyelitis. However, selecting an appropriate animal model that accurately recapitulates the human pathology of osteomyelitis while controlling for multiple variables that influence different clinical presentations remains a significant challenge. In this review, we present an overview of various animal models used in osteomyelitis research, including rodent, rabbit, avian/chicken, porcine, minipig, canine, sheep, and goat models. We discuss the characteristics of each animal model and the corresponding clinical scenarios that can provide a basic rationale for experimental selection. This review highlights the importance of selecting an appropriate animal model for osteomyelitis research to improve the accuracy of the results and facilitate the development of novel treatment and management strategies.

Repair of complex ovine segmental mandibulectomy utilizing customized tissue engineered bony flaps

Craniofacial defects require a treatment approach that provides both robust tissues to withstand the forces of mastication and high geometric fidelity that allows restoration of facial architecture. When the surrounding soft tissue is compromised either through lack of quantity (insufficient soft tissue to enclose a graft) or quality (insufficient vascularity or inducible cells), a vascularized construct is needed for reconstruction. Tissue engineering using customized 3D printed bioreactors enables the generation of mechanically robust, vascularized bony tissues of the desired geometry. While this approach has been shown to be effective when utilized for reconstruction of non-load bearing ovine angular defects and partial segmental defects, the two-stage approach to mandibular reconstruction requires testing in a large, load-bearing defect. In this study, 5 sheep underwent bioreactor implantation and the creation of a load-bearing mandibular defect. Two bioreactor geometries were tested: a larger complex bioreactor with a central groove, and a smaller rectangular bioreactor that were filled with a mix of xenograft and autograft (initial bone volume/total volume BV/TV of 31.8 ± 1.6%). At transfer, the tissues generated within large and small bioreactors were composed of a mix of lamellar and woven bone and had BV/TV of 55.3 ± 2.6% and 59.2 ± 6.3%, respectively. After transfer of the large bioreactors to the mandibular defect, the bioreactor tissues continued to remodel, reaching a final BV/TV of 64.5 ± 6.2%. Despite recalcitrant infections, viable osteoblasts were seen within the transferred tissues to the mandibular site at the end of the study, suggesting that a vascularized customized bony flap is a potentially effective reconstructive strategy when combined with an optimal stabilization strategy and local antibiotic delivery prior to development of a deep-seated infection.

Advances in In Vitro and In Vivo Bioreactor-Based Bone Generation for Craniofacial Tissue Engineering

Craniofacial reconstruction requires robust bone of specified geometry for the repair to be both functional and aesthetic. While native bone from elsewhere in the body can be harvested, shaped, and implanted within a defect, using either an in vitro or in vivo bioreactors eliminates donor site morbidity while increasing the customizability of the generated tissue. In vitro bioreactors utilize cells harvested from the patient, a scaffold, and a device to increase mass transfer of nutrients, oxygen, and waste, allowing for generation of larger viable tissues. In vivo bioreactors utilize the patient's own body as a source of cells and of nutrient transfer and involve the implantation of a scaffold with or without growth factors adjacent to vasculature, followed by the eventual transfer of vascularized, mineralized tissue to the defect site. Several different models of in vitro bioreactors exist, and several different implantation sites have been successfully utilized for in vivo tissue generation and defect repair in humans. In this review, we discuss the specifics of each bioreactor strategy, as well as the advantages and disadvantages of each and the future directions for the engineering of bony tissues for craniofacial defect repair.

A Porcine Model Using Adipose Stem Cell-Loaded Scaffolds for Alveolar Ridge Augmentation

Tooth loss greatly affects a person's quality of life and many turn to dental implants to replace lost teeth. The success of a dental implant depends on the amount of alveolar bone supporting the implant, and thus, bone augmentation is often necessary to preserve or build up bone volume in the alveolar ridge. Bone can be augmented with autogenous bone, allografts, or xenografts, but the limitations of such natural bone grafts prompt researchers to develop synthetic scaffolds supplemented with cells and/or bioactive agents as alternative bone grafts. The translation of these combination scaffolds from the laboratory to the clinic requires reliable experimental models that can simulate the clinical conditions in human patients. In this article, we describe the use of a porcine alveolar defect model as a platform to evaluate the efficacy of a novel combination of a three-dimensional-printed polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold and adipose-derived mesenchymal stem cells (AD-MSCs) in lateral alveolar augmentation. The surgical protocol for the defect creation and regenerative surgery, as well as analytical methods to determine the extent of tissue regeneration, are described and discussed.

Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery

Despite considerable advances in biomaterials-based bone tissue engineering technologies, autografts remain the gold standard for rehabilitating critical-sized bone defects in the oral and maxillofacial (OMF) region. A majority of advanced synthetic bone substitutes (SBS’s) have not transcended the pre-clinical stage due to inferior clinical performance and translational barriers, which include low scalability, high cost, regulatory restrictions, limited advanced facilities and human resources. The aim of this study is to develop clinically viable alternatives to address the challenges of bone tissue regeneration in the OMF region by developing ‘dual network composites’ (DNC’s) of calcium metaphosphate (CMP)—poly(vinyl alcohol) (PVA)/alginate with osteogenic ions: calcium, zinc and strontium. To fabricate DNC’s, single network composites of PVA/CMP with 10% (w/v) gelatine particles as porogen were developed using two freeze–thawing cycles and subsequently interpenetrated by guluronate-dominant sodium alginate and chelated with calcium, zinc or strontium ions. Physicochemical, compressive, water uptake, thermal, morphological and in vitro biological properties of DNC’s were characterised. The results demonstrated elastic 3D porous scaffolds resembling a ‘spongy bone’ with fluid absorbing capacity, easily sculptable to fit anatomically complex bone defects, biocompatible and osteoconductive in vitro, thus yielding potentially clinically viable for SBS alternatives in OMF surgery.

[Research progress of in vivo bioreactor for bone tissue engineering]

Objective

To review the research progress of in vivo bioreactor (IVB) for bone tissue engineering in order to provide reference for its future research direction.

Methods

The literature related to IVB used in bone tissue engineering in recent years was reviewed, and the principles of IVB construction, tissue types, sites, and methods of IVB construction, as well as the advantages of IVB used in bone tissue engineering were summarized.

Results

IVB takes advantage of the body's ability to regenerate itself, using the body as a bioreactor to regenerate new tissues or organs at injured sites or at ectopic sites that can support the regeneration of new tissues. IVB can be constructed by tissue flap (subcutaneous pocket, muscle flap/pocket, fascia flap, periosteum flap, omentum flap/abdominal cavity) and axial vascular pedicle (axial vascular bundle, arteriovenous loop) alone or jointly. IVB is used to prefabricate vascularized tissue engineered bone that matched the shape and size of the defect. The prefabricated vascularized tissue engineered bone can be used as bone graft, pedicled bone flap, or free bone flap to repair bone defect. IVB solves the problem of insufficient vascularization in traditional bone tissue engineering to a certain extent.

Conclusion

IVB is a promising method for vascularized tissue engineered bone prefabrication and subsequent bone defect reconstruction, with unique advantages in the repair of large complex bone defects. However, the complexity of IVB construction and surgical complications hinder the clinical application of IVB. Researchers should aim to develop a simple, safe, and efficient IVB.

Covalent immobilization of DJK-5 peptide on porous titanium for enhanced antibacterial effects and restrained inflammatory osteoclastogenesis

Currently, implant-related bone infection characterized by aggravated infection-induced inflammatory responses and osteolysis, remains a severe challenge in orthopedic surgery, especially in patients with osteoporosis. Attempts to control such responses using biomaterials with combined immunomodulatory and anti-bacterial properties may provide novel strategies. Herein, DJK-5, a class of host defense peptides (HDPs) with established antimicrobial and immunomodulatory functions, was introduced into porous Ti alloy. Our results indicated that the DJK-5 immobilized surfaces showed intrinsically multifunctional properties, including antibacterial ability, anti-inflammation, biocompatibility and osteolysis-inhibiting properties. The results demonstrated that the antibacterial efficiency of DJK-5 functionalized surfaces was over 90 % for both Gram-positive and Gram-negative bacteria. Specifically, DJK-5 functionalized samples also possessed the excellent anti-bacterial activity against a mixture of bacterial strains, including S. aureus, S. epidermidis and P. aeruginosa, with an antibacterial rate against mixed bacteria reaching 91.36 %, as well as reduced biofilm formation. The remarkable anti-bacterial efficacy was likely based on the direct anti-bacterial effect of DJK-5, which destroyed the integrity of bacteria membranes, leading to the leakage of intracellular materials. Additionally, the immobilized DJK-5 surfaces could indirectly kill bacteria through promoted macrophage capacity to bacteria uptake. Furthermore, DJK-5 functionalized surfaces suppressed inflammatory reaction by decreasing the release of pro-inflammatory factors and increasing the secretions of anti-inflammatory factors, and thereby impeded the activation of NF-κB signal pathway, which resulted in the disruption of the actin rings and decreased Tracp5b expressions. Based on these promising findings, the multi-functional DJK-5 immobilized titanium represents an efficient alternative to realize better osseointegration in sever implant-associated bacterial infections.

Nanozymes go oral: nanocatalytic medicine facilitates dental health

Nanozymes are multi-functional nanomaterials with enzyme-like activity, which rapidly won a place in biomedicine due to their number of nanocatalytic materials types and applications. Yan and Gao first discovered horseradish peroxidase-like activity in ferromagnetic nanoparticles in 2007. With the joint efforts of many scientists, a new concept-nanocatalytic medicine-is emerging. Nanozymes overcome the inherent disadvantages of natural enzymes, such as poor environmental stability, high production costs, difficult storage and so on. Their progress in dentistry is following the advancement of materials science. The oral research and application of nanozymes is becoming a new branch of nanocatalytic medicine. In order to highlight the great contribution of nanozymes facilitating dental health, we first review the overall research progress of multi-functional nanozymes in oral related diseases, including treating dental caries, dental pulp diseases, oral ulcers and peri-implantitis; the monitoring of oral cancer, oral bacteria and ions; and the regeneration of soft and hard tissue. Additionally, we also propose the challenges remaining for nanozymes in terms of their research and application, and mention future concerns. We believe that the new catalytic nanomaterials will play important roles in dentistry in the future.

An Ovine Model of In Vivo Bioreactor-Based Bone Generation

The generation of vascularized mineralized tissues of complex geometry without the use of extrinsic growth factors or exogenous cells requires a large animal model to recapitulate the challenges seen in the clinic. The proposed versatile ovine model can be utilized to investigate the use of a customized bioreactor to generate mineralized tissue, matching the size and shape of a defect before transfer to and integration within another site. The protocol results in bioreactors that can be harvested for investigation of the effects of different biomaterials for the generation of bone or to generate tissues appropriate for repair of bony defects; this protocol focuses on reconstruction of the mandible but could be modified for orthopedic applications. The bioreactor packing material can be altered, allowing for the study of various commercially available or novel graft materials. The surgical procedure requires ∼1.5 h to implant four bioreactors adjacent to rib periosteum. After 9 weeks, the harvest of the bioreactor tissue takes approximately 1 h. If creating a craniofacial defect, an additional 2 h should be taken for mandibular defect creation and 2 to 3 h for the reconstruction. Sheep that have undergone reconstruction are typically euthanized after 12 weeks to allow for evaluation of transferred tissues. In this protocol, we discuss the necessary steps to ensure the reproducibility and analytical techniques to assess bone regeneration such as microcomputed tomography, mechanical analysis, and histology. Impact statement Bone grafting is a frequent procedure in the fields of orthopedics, otolaryngology, and oral and maxillofacial surgery. Generating customized, vascularized, and mechanically robust bony tissues while eliminating common complications such as donor site morbidity with autograft harvest or lack of suitable mechanical properties with commercially available synthetic graft would greatly improve the lives of patients. A large animal model is necessary to generate tissues of clinically relevant geometries. In this article, a reproducible ovine model of in vivo bioreactor technology toward customized bone generation is presented with broad application to tissue engineering and regenerative medicine.