Effect of substrate loading rate of chemical wastewater on fermentative biohydrogen production in biofilm configured sequencing batch reactor

Influence of Organic Load on Biohydrogen Production in an AnSBBR Treating Glucose-Based Wastewater

An anaerobic sequencing batch reactor with immobilized biomass (AnSBBR) was applied to the production of biohydrogen treating a glucose-based wastewater. The influence of the applied volumetric organic load was studied by varying the concentration of influent at 3600 and 5250 mg chemical oxygen demand (COD) L(-1) and cycle lengths of 4, 3, and 2 h resulting in volumetric organic loads of 10.5 to 31.1 g COD L(-1). The results revealed system stability in the production of biohydrogen and substrate consumption. The best performance was an organic removal (COD) of 24 % and carbohydrate removal (glucose) of 99 %. Volumetric and specific molar productivity were 60.9 mol H2 m(-3) day(-1) and 5.8 mol H2 kg SVT(-1) day(-1) (biogas containing 40 % H2 and no CH4) at 20.0 g COD L(-1) day(-1) (5250 mg COD L(-1) and 3 h). The yield between produced hydrogen and removed organic matter in terms of carbohydrates was 0.94 mol H2 Mol GLU(-1) (biogas containing 52 % H2 and no CH4) at 10.5 g COD L(-1) day(-1) (3600 mg COD L(-1) and 4 h), corresponding to 23 and 47 % of the theoretical values of the acetic and butyric acid metabolic routes, respectively. Metabolites present at significant amounts were ethanol, acetic acid, and butyric acid. The conditions with higher influent concentration and intermediate cycle length, and the condition with lower influent concentration and longer cycle showed the best results in terms of productivity and yield, respectively. This indicates that the best productivity tends to occur at higher organic loads, as this parameter involves the biogas production, and the best yield tends to occur at lower and/or intermediate organic loads, as this parameter also involves substrate consumption.

Biohydrogen production: strategies to improve process efficiency through microbial routes

The current fossil fuel-based generation of energy has led to large-scale industrial development. However, the reliance on fossil fuels leads to the significant depletion of natural resources of buried combustible geologic deposits and to negative effects on the global climate with emissions of greenhouse gases. Accordingly, enormous efforts are directed to transition from fossil fuels to nonpolluting and renewable energy sources. One potential alternative is biohydrogen (H₂), a clean energy carrier with high-energy yields; upon the combustion of H₂, H₂O is the only major by-product. In recent decades, the attractive and renewable characteristics of H₂ led us to develop a variety of biological routes for the production of H₂. Based on the mode of H₂ generation, the biological routes for H₂ production are categorized into four groups: photobiological fermentation, anaerobic fermentation, enzymatic and microbial electrolysis, and a combination of these processes. Thus, this review primarily focuses on the evaluation of the biological routes for the production of H₂. In particular, we assess the efficiency and feasibility of these bioprocesses with respect to the factors that affect operations, and we delineate the limitations. Additionally, alternative options such as bioaugmentation, multiple process integration, and microbial electrolysis to improve process efficiency are discussed to address industrial-level applications.

Systematic approach to assess biohydrogen potential of anaerobic sludge and soil rhizobia as biocatalysts: Influence of crucial factors affecting acidogenic fermentation

A systematic protocol was designed to enumerate the variation in biohydrogen production with two different biocatalysts (sludge and soil) under different pH and organic loads. Both the biocatalysts showed cumulatively higher H2 production under acidogenic condition (pH 6) than at neutral pH condition. The cumulative hydrogen production was non-linearly fitted with modified Gompertz model and statistically validated. Pretreated soil biocatalyst showed relatively higher H2 production (OLR II, 142±5ml) than pretreated sludge (OLR I, 123±5ml); which was evidenced by substrate linked dehydrogenase activity and bio-electrochemical analysis. Experimental results revealed agricultural soil as a better biocatalyst than anaerobic sludge for all the operated process conditions. The voltammogram profiles and Tafel slopes revealed dominance of reductive catalytic activity of the pretreated inoculums substantiating dark-fermentation. Soil consortia showed low polarization resistance (2.24kΩ) and high reductive electron transfer efficiency (1.17 Vdec(-1)) at a high organic load; thus, rebating high H2 production.

A review of dark fermentative hydrogen production from biodegradable municipal waste fractions

Hydrogen is believed to play a potentially key role in the implementation of sustainable energy production, particularly when it is produced from renewable sources and low energy-demanding processes. In the present paper an attempt was made at critically reviewing more than 80 recent publications, in order to harmonize and compare the available results from different studies on hydrogen production from FW and OFMSW through dark fermentation, and derive reliable information about process yield and stability in view of building related predictive models. The review was focused on the effect of factors, recognized as potentially affecting process evolution (including type of substrate and co-substrate and relative ratio, type of inoculum, food/microorganisms [F/M] ratio, applied pre-treatment, reactor configuration, temperature and pH), on the fermentation yield and kinetics. Statistical analysis of literature data from batch experiments was also conducted, showing that the variables affecting the H2 production yield were ranked in the order: type of co-substrate, type of pre-treatment, operating pH, control of initial pH and fermentation temperature. However, due to the dispersion of data observed in some instances, the ambiguity about the presence of additional hidden variables cannot be resolved. The results from the analysis thus suggest that, for reliable predictive models of fermentative hydrogen production to be derived, a high level of consistency between data is strictly required, claiming for more systematic and comprehensive studies on the subject.

Fermentative hydrogen production from soybean protein processing wastewater in an anaerobic baffled reactor (ABR) using anaerobic mixed consortia

Fermentative H(2) production from soybean protein processing wastewater (SPPW) was investigated in a four-compartment anaerobic baffled reactor (ABR) using anaerobic mixed cultures under continuous flow condition in the present study. After being inoculated with aerobic activated sludge and operated at the inoculants of 5.98 gVSS L(-1), COD of 5000 mg L(-1), HRT of 16 h and temperature of (35 ± 1) °C for 22 days, the ABR achieved stable ethanol-type fermentation. The specific hydrogen production rate of anaerobic activated sludge was 165 LH(2)kg MLVSS(-1) day(-1), the substrate conversion rate was 600.83 LH(2)kg COD(-1)and the COD removal efficiency was 44.73% at the stable operation status. The ABR system exhibited a better stability and higher hydrogen yields than continuous stirring tank reactor under the same operational condition. The experimental data documented the feasibility of substrate degradation along with molecular H(2) generation utilizing SPPW as primary carbon source in the ABR system.

Bioreactor and process design for biohydrogen production

Biohydrogen is regarded as an attractive future clean energy carrier due to its high energy content and environmental-friendly conversion. It has the potential for renewable biofuel to replace current hydrogen production which rely heavily on fossil fuels. While biohydrogen production is still in the early stage of development, there have been a variety of laboratory- and pilot-scale systems developed with promising potential. This work presents a review of advances in bioreactor and bioprocess design for biohydrogen production. The state-of-the art of biohydrogen production is discussed emphasizing on production pathways, factors affecting biohydrogen production, as well as bioreactor configuration and operation. Challenges and prospects of biohydrogen production are also outlined.

Effect of the organic loading rate on biogas composition in continuous fermentative hydrogen production

Some systems did not select for hydrogen-producing microorganisms and an unexpected growth of hydrogenotrophic methanogens was observed, although the reactors were operated under well-defined operating conditions that could result in biohydrogen production. The aim of this study was to evaluate the effect of the organic loading rate (OLR) on the hydrogen and methane composition of the biogas produced in dark fermentative processes. The study was carried out using an upflow anaerobic sludge blanket (UASB) reactor in order to evaluate the OLR effect in systems with sludge retention. During continuous operation, the UASB reactor showed the slow development of methanogenic activity, related to the applied OLR. The results demonstrate that operating an UASB reactor at pH 5.5 is not enough to prevent the acclimation of methanogens to the acidic pH and therefore long-term biohydrogen production cannot be achieved. Moreover, this study demonstrates that OLR also has an effect on the biogas composition, where the higher the OLR the greater the biogas H2 content.