Anaerobic degradation of textile dye bath effluent using Halomonas sp

Adaptive characteristics of indigenous microflora in an organically contaminated high salinity groundwater

Salinity, a critical factor, could directly or indirectly affect the microbial community structure and diversity. Changes in salinity levels act as environmental filters that influence the transformation of key microbial species. This study investigates the adaptive characteristics of indigenous microflora in groundwater in relation to external organic pollutants under high salinity stress. A highly mineralized shallow groundwater in Northwest China was conducted as the study area, and six representative sampling points were chosen to explore the response of groundwater hydrochemical parameters and microflora, as well as to identify the tolerance mechanisms of indigenous microflora to combined pollution. The results revealed that the dominant genera found in high salinity groundwater contaminated with organic pollutants possess the remarkable ability to degrade such pollutants even under challenging high salinity conditions, including Halomonas, Pseudomonas, Halothiobacillus, Sphingomonas, Lutibacter, Aquabacterium, Thiomicrospira, Aequorivita, etc. The hydrochemical factors, including total dissolved solids (TDS), sulfide, nitrite, nitrate, oxidation reduction potential (ORP), NH3-N, Na, Fe, benzene series, phenols, and halogenated hydrocarbons, demonstrated a significant influence on microflora. High levels of sulphate and sulfide in groundwater can exhibit dual effects on microflora. On one hand, these compounds can inhibit the growth and metabolism of microorganisms. On the other hand, they can also serve as effective electron donors/receptors during the microbial degradation of organic pollutants. Microorganisms exhibit resilience to the inhibitory effects of high salinity and organic pollutants via a series of tolerance mechanisms, such as strengthening the extracellular membrane barrier, enhancing the synthesis of relevant enzymes, initiating novel biochemical reactions, improving cellular self-healing capabilities, responding to unfavorable environmental conditions by migration, and enhancing the S cycle for the microbial metabolism of organic pollutants.

Hybrid magnetic CoFe2O4@γ-Fe2O3@CTAB nanocomposites as efficient and reusable adsorbents for Remazol Brilliant Blue R dye

The main goal of the present survey was to elaborate, characterize and evaluate the efficiency of ferrite-based nanoparticles modified with cetyltrimethylammonium bromide (CTAB) as potential magnetic nanoadsorbents to remove Remazol Brilliant Blue R (RBBR) from water. It is proposed an innovative nanomaterial architecture based on highly magnetic and chemically stable core@shell nanoparticles covered by an adsorptive surface layer of CTAB (CoFe2O4@γ-Fe2O3@CTAB). Samples of two different mean sizes (7.5 and 14.6 nm) were synthesized using a hydrothermal coprecipitation followed by surface treatment and functionalization. Batch tests were performed to evaluate the influence of contact time, temperature, pH, shaking rate, presence of interferents and mean size on the performance of the proposed nanomaterials. The kinetics of the adsorption process followed the pseudo-second-order model with an equilibrium time of 20 min. The adsorption capacity was estimated by the Langmuir isotherm model and was found to be 56.3 mg/g (smaller size) and 45.6 mg/g (larger size) at pH = 3 and a shaking rate of 400 rpm. The process was spontaneous, exothermic, and showed increased randomness. Sulphate ions negatively impacted the removal of RBBR. The best performance of the nanoadsorbent based on smaller mean sizes can be correlated to its larger surface area. Regeneration and readsorption tests showed that the nanoadsorbents retain more than 80% of their original removal capacity, therefore they can be effectively recycled and reused.

Whole genome sequencing analysis and Box-Behnken design for the optimization of the decolourization of mixture textile dyes by halotolerant microbial consortium

The use of dyes in textile industries has resulted in substantially contaminated soil, water and ecosystem including fauna and flora. So, the application of eco-friendly approach for dyes removal is in great demand. The goal of this research was to develop and test a bacterial consortium for biodegrading dyes in artificial textile effluent (ATE) derived from mixture of Indigo carmine (40 mg/l); Malachite green (20 mg/l); Cotton bleu (40 mg/l); Bromocresol green (20 mg/l) and CI Reactive Red 66 (40 mg/l) dissolved in artificial seawater. The Box-Behnken design (BBD) which combine six variables with three levels each was used to determine the potential removal of dyes in ATE, by the selected microbial consortium (M31 and M69b). The experimental process indicated that decolourization of ATE reached 77.36 % under these conditions values: salinity (30 g/l), pH (9), peptone (5 g/l), inoculum size (1.5 108 CFU/ml), agitation (150 rpm) and contact time (72 h). The decolourization was confirmed by FTIR spectrum analysis of ATE before and after bacterial treatment. Bacterial strains used in this study were identified as Halomonas pacifica M31 and Shewanella algae M69b using 16 rDNA sequences. Moreover, the total genome analysis of M31 and M69b validated the implication of bacterial genes in mixture dyes removal. Therefore, the effect of the selected bacterial consortium on ATE removal was confirmed and it may be used in industrial wastewater treatment to issuing environmental safety.

Halomonas flagellata sp. nov., a halophilic bacterium isolated from saline soil in Xinjiang

A Gram-stain-negative, strictly aerobic, motile, slightly curved rod-shaped bacterium with multiple flagella, designated strain EGI 63088T, was isolated from a bulk soil of Kalidium foliatum, collected from Wujiaqu in Xinjiang Uighur Autonomous Region, PR China. The optimal growth temperature, salinity, and pH for strain EGI 63088T growth were 30 °C, 3% (w/v) NaCl and 8, respectively. Phylogenetic analysis using 16S rRNA gene sequences indicated that strain EGI 63088T showed the highest sequence similarities to Halomonas heilongjiangensis 9-2T (97.94%), H. lysinitropha 3(2)T (97.51%), and H. daqiaonensis CGMCC 1.9150T (97.08%). The average nucleotide identity and digital DNA-DNA hybridization values between the strain EGI 63088T and H. heilongjiangensis 9-2T were 89.03 and 41.10%, respectively. The DNA G + C content of the genome for strain EGI 63088T was 66.3 mol%. The most prevalent antibiotic resistance and virulence-related genes in Halomonas genomes were Streptomyces cinnamoneu EF-Tu mutant, pilT, and cheY, respectively. The predominant fatty acids of strain EGI 63088T were summed feature 8 (C18: 1 ω6c and/or C18: 1 ω7c), summed feature 3 (C16: 1 ω6c and/or C16: 1 ω7c), and C16: 0; its major respiratory quinone was ubiquinone-9 (Q-9), and the major polar lipids were diphosphatidylglycerol, phosphatidylglycerol, and phosphatidylethanolamine. According to the above results, strain EGI 63088T is considered a novel species of the genus Halomonas, for which the name Halomonas flagellata sp. nov. is proposed. The type strain is EGI 63088T (= KCTC 92047T = CGMCC 1.19133T).

WITHDRAWN: Heavy metal ions and dyes removal from aqueous solution using Aloevera-based biosorbent: A systematic review

This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been withdrawn at the request of the authors, editor and publisher. The publisher regrets that an error occurred which led to the premature publication of this paper. The publisher apologizes to the readers for this unfortunate erro

Microbial fuel cells a state-of-the-art technology for wastewater treatment and bioelectricity generation

Wastewater treatment and electricity generation have been the major concerns for the last few years. The scarcity of fossil fuels has led to the development of unconventional energy resources that are pollution-free. Microbial fuel cell (MFC) is an environmental and eco-friendly technology that harvests energy through the oxidation of organic substrates and transform into the electric current with the aid of microorganisms as catalysts. This review presents power output and colour removal values by designing various configurations of MFCs and highlights the importance of materials for the fabrication of anode and cathode electrodes playing vital roles in the formation of biofilm and redox reactions taking place in both chambers. The electron transfer mechanism from microbes towards the electrode surface and the generation of electric current are also highlighted. The effect of various parameters affecting the cell performance such as type and amount of substrate, pH and temperature maintained within the chambers have also been discussed. Although this technology presents many advantages, it still needs to be used in combination with other processes to enhance power output.

A Comprehensive Review of Effective Adsorbents Used for the Removal of Dyes from Wastewater

Aim:

The objective of the review paper aims to explore and to provide the insight of various low-cost adsorbents prepared and used in the removal of hazardous dye pollutants from the contaminated industrial effluents.

Background:

The major untreated discharge from the textile industries constitutes a wide range of organic contaminants with the enhanced concentration of biological oxygen demand and chemical oxygen demand inthe water bodies. Dyes are considered as the major water contaminants and this quest the researchers to adopt various technologies to remove the hazardous dye pollutants from the aquatic environment. Dyes are the chemical compounds that tend to adhere themselves with metal or salts by covalent bond formation or complexes by mechanical retention or physical adsorption so as to impart colours to which it is being applied.

Objective:

Numerous treatment methodologies which have been applied to the degradation of dyes. The current study has been focused on the distinct low cost and cost-effective adsorbents used in the removal of various dye pollutants. Also, the application of nanoparticles in the removal of the hazardous dye pollutants had received great interest because of its size and high reactive nature.

Methods:

The treatment technologies used in the removal of dye pollutants from wastewater have been listed as adsorption, coagulation, electrocoagulation, flocculation, membrane filtration, oxidation and biological treatment.

Results:

The complex structure of the dyes causes a great harmful impact on the aquatic environment. Though numerous treatment technologies have been applied, adsorption has been preferred by various researchers because of its cost-effective nature.

Conclusion:

The various adsorbents are used in the removal of cationic, anionic and non-ionic dyes. The different types of adsorbent from agricultural waste, activated carbons, nanomaterials and biomaterials have been discussed with the advantages and limitations.

An Integrative Approach to Study Bacterial Enzymatic Degradation of Toxic Dyes

Synthetic dyes pose a large threat to the environment and consequently to human health. Various dyes are used in textile, cosmetics, and pharmaceutical industries, and are released into the environment without any treatment, thus adversely affecting both the environment and neighboring human populations. Several existing physical and chemical methods for dye degradation are effective but have many drawbacks. Biological methods over the years have gained importance in the decolorization and degradation of dye and have also overcome the disadvantages of physiochemical methods. Furthermore, biological methods are eco-friendly and lead to complete decolorization. The mechanism of decolorization and degradation by several bacterial enzymes are discussed in detail. For the identification of ecologically sustainable strains and their application at the field level, we have focused on bioaugmentation aspects. Furthermore, in silico studies such as molecular docking of bacterial enzymes with dyes can give a new insight into biological studies and provide an easy way to understand the interaction at the molecular level. This review mainly focuses on an integrative approach and its importance for the effective treatment and decolorization of dyes.

A strategy to enhance the photocatalytic efficiency of α-Fe2O3

The photocatalytic dye degradation of pure α-Fe₂O₃ and different concentration of Co doped α-Fe₂O₃ is explored. Facile hydrothermal method were employed to prepare pristine, 2% and 4% Co-Fe₂O₃ nanoparticles. Further, synthesized product confirmation studies were employed from X-ray diffraction, UV-vis spectrometry, Fourier-transform infrared, Raman, scanning electron microscope and transmission electron microscope studies. The rhombohedral nanoparticles developed were enhanced photocatalytic action. Photocatalytic dye degradation studies were analyzed for prepared three samples and the photocatalytic efficacy of the obtained photocatalysts was compared experimentally. Methylene blue dye was degraded under UV-light irradiation with 364 nm. The results showed that 4% Co doped α-Fe₂O₃ sample exhibited better dye degradation with 92% efficiency. The 4% doping of cobalt ions enhanced the photocatalytic property of Fe₂O₃ and is a good candidate for methylene blue dye degradation above 90%. In addition, strategy for photocatalytic efficiency enhancement was proposed.

Photocatalytic and Biological Oxidation Treatment of Real Textile Wastewater

With rapidly growing urbanization and industrialization in developing countries, a large volume of wastewater is produced from industries that contain chemicals generating high environmental risks, which could affect health and socio-economic activities if not treated properly. In this study, the discoloration of wastewater containing azo dyes by chemical oxidation process combined with a biological treatment was evaluated and applied on real textile wastewater generated from one Ethiopian industrial site. The use of TiO2 as a photocatalyst and the effect of the addition of H2O2 on color removal were investigated. Photocatalysis was followed by aerobic biological treatment and their combination resulted in 93.3 and 90.4% removal of color and chemical oxygen demand (COD), respectively. These results revealed that the combination of photocatalytic and biological treatment approach shows a promising potential for the removal of color from real textile wastewater.

Biodegradation and decolorization of textile dyes by bacterial strains: a biological approach for wastewater treatment

Textile industry releases large quantities of toxic dyes, which is a threat to public health and needs proper management before their release into environment. Out of the different approaches used these days, biodegradation and bio-decolorization is considered an eco-friendly and effective technique as this involves the use of microbes. This technique has the potential to be used effectively for a wide variety of dyes. In biological methods, mainly bacteria, fungi, and some algae are usually employed to remove or decolorize dyes present in textiles effluents and wastewaters. A number of researchers have used bacterial strains and relevant isolated enzymes successfully to decolorize a number of dyes. In this review article, various biological methods that have been used for the biodegradation and decolorization of textile dyes have been described. The review will also revive the significance of biological methods over other physical and chemical treatment methods that would be helpful in ensuring clean environment if used on large scale. Out of these methods, biodegradation through bacterial strains is considered as the best alternative to control water pollution as the growth rate of bacteria is considerably high as compared to other microorganisms. Thus if used the required biomass needed for biodegradation can be obtained in comparatively short interval of time.

Metabolic heat coherent growth of Halomonas variabilis (HV) for enhanced production of Extracellular Polymeric Substances (EPS) in a Bio Reaction Calorimeter (BioRC)

The optimum condition at which the halophilic salt-tolerant bacterium Halomonas variabilis (MTCC 3712) produces the maximum amount of extracellular polymeric substances (EPS) was investigated experimentally using response surface methodology based on the central composite design (CCD). Hyper-saline medium containing 1.5% w/v NaCl enriched nutrient medium with 1.5% glucose as a carbon source was used to produce about 4.74 g/L of EPS in 16 h compared to various other EPS production of this kind. The metabolic heat profile confirms net EPS production by HV was a growth-associated aerobic process. There is a good agreement between metabolic heat and Oxygen Uptake Rate (OUR). The maximum observed heat release was 2.1 W. The total protein content of the sample is 53% of the total EPS (Soluble EPS, Loosely bound EPS, and tightly bound EPS). The emulsifying and flocculating activities of the EPS were measured to explore the possibility of using the biopolymer for effluent treatment.

Adsorptive removal of anionic dye using calcined oyster shells: isotherms, kinetics, and thermodynamics

Oyster shells are a type of biogenic materials with excellent characteristics in surface area, porosity, sorption capacity, and high concentration of CaCO₃ (up to 90 wt%), and can be easily converted into a calcium-based alkali adsorbent. In this research, oyster shells calcined at 900 °C were applied as an adsorbent for acid green 25 (AG25) removal from aqueous solutions. The adsorption performances were evaluated, and the FTIR, SEM, and BET techniques were employed to characterize this material. Results showed that AG25 removal performance depended on adsorbent dosage, pH, adsorption temperature, contact time, and initial concentration. Adsorption capacity was maximized at 34.1 mg g^-1 at pH of 11.0, an adsorbent dosage of 2.0 g L^-1, an AG25 concentration of 70 mg L^-1, and adsorption temperature of 40 °C. Both the Ho-McKay model and the pseudo-second-order model correlated with the adsorption kinetics well with the values of R² > 0.99 (closer to unity). The Langmuir isotherm showed an excellent correlation coefficient of R² > 0.99 with the equilibrium data. The thermodynamics study indicates that the adsorption was spontaneous and endothermic. These results demonstrate that the calcined oyster shells has the potential to be used as an eco-friendly and low-cost effective adsorbent for anionic dye removal from water.

A review on the sustainability of textile industries wastewater with and without treatment methodologies

The textile industry in India plays a vital role in the economic growth of the nation. The growth of the textile industry not only impacts the economy of a country but also influences the global economy and mutual exchange of technology between the countries. However, the textile industry also generates an enormous quantity of waste as waste sludge, fibers and chemically polluted waters. The chemically polluted textile wastewater degrades the quality of the soil and water when it mixes with these natural resources and its dependent habitats and environment. Owing to the existing problem of solid and liquid waste, textile industries are facing major problems in environment pollution. Therefore, researchers and the textile industries are focusing on the reduction of textile wastewater and the formulation of alternative efficient treatment techniques without hampering the environment. Hence, the present literature survey mainly concentrates on the various wastewater treatment techniques and their advantages. Moreover, the focus of the study was to describe the methods for the reduction of environmental waste and effective utilization of recycled water with zero wastewater management techniques. The alternative methods for the reduction of textile waste are also covered in this investigation. Finally, this paper also suggests utilization of solid wastes after treatment of wastewater in other sectors like construction for the preparation of low-grade tiles and or bricks by replacing the cement normally used in their manufacturing.

Effects of coexisting BDE-47 on the migration and biodegradation of BDE-99 in river-based aquifer media recharged with reclaimed water

Two prominent polybrominated diphenyl ether (PBDE) congeners have been included in the persistent organic pollutant list, 2,2',4,4',5-tetrabromodiphenyl ether (BDE-99) and 2,2,4,4'-tetrabromodiphenyl ether (BDE-47), which have been detected in treated municipal wastewater, river water, and sediments in China. A lab-scale column experiment was established to investigate the effects of the competitive sorption of BDE-47 on BDE-99 biodegradation and migration in two types of river-based aquifer soils during groundwater recharge with reclaimed water. Two types of recharge columns were used, filled with either silty clay (SC) or black carbon-amended silty clay (BCA). The decay rate constants of BDE-99 in the BCA and SC systems were 0.186 and 0.13 m^-1 in the single-solute system and 0.128 and 0.071 m^-1 in the binary-solute system, respectively, showing that the decay of BDE-99 was inhibited by the coexistence of BDE-47. This was particularly evident in the SC system because the higher hydrophobicity of BDE-99 determined the higher affinity and competition for sorption sites onto black carbon. The biodegradation of BDE-99 was suppressed by the coexistence of BDE-47, especially in the SC system. Lesser-brominated congeners (BDE-47 and BDE-28) and higher-brominated congeners (BDE-100, BDE-153, BDE-154, and BDE-183) were generated in the four recharge systems, albeit at different ratios. Bacterial biodiversity was influenced by the presence of BDE-47 in the SC system, while it had no significant effect on the BCA system, because the high sorption capacity of black carbon on the hydrophobic PBDEs effectively reduced their toxicity. The ranking order of the most abundant classes changed markedly due to the coexistence of BDE-47 in both the SC and BCA systems. The ranking order of the most abundant genera changed from Azospira, Methylotenera, Desulfovibrio, Methylibium, and Bradyrhizobium to Halomonas, Hyphomicrobium, Pseudomonas, Methylophaga, and Shewanella, which could be involved in PBDE degradation.

Cometabolic degradation of lincomycin in a Sequencing Batch Biofilm Reactor (SBBR) and its microbial community

Cometabolism technology was employed to degrade lincomycin wastewater in Sequencing Batch Biofilm Reactor (SBBR). In contrast with the control group, the average removal rate of lincomycin increased by 56.0% and Total Organic Carbon (TOC) increased by 52.5% in the cometabolic system with glucose as growth substrate. Under the same condition, Oxidation-Reduction Potential (ORP) was 85.1±7.3mV in cometabolic system and 198.2±8.4mV in the control group, indicating that glucose changed the bulk ORP and created an appropriate growing environment for function bacteria. Functional groups of lincomycin were effectively degraded in cometabolic system proved by FTIR and GC-MS. Meanwhile, results of DGGE and 16S rDNA showed great difference in dominant populations between cometabolic system and the control group. In cometabolic system, Roseovarius (3.35%), Thiothrix (2.74%), Halomonas (2.49%), Ignavibacterium (2.02%), and TM7_genus_incertae_sedis (1.93%) were verified as dominant populations at genus level. Cometabolism may be synergistically caused by different functional dominant bacteria.

Biodegradation of Para Amino Acetanilide by Halomonas sp. TBZ3

BACKGROUND

Aromatic compounds are known as a group of highly persistent environmental pollutants. Halomonas sp. TBZ3 was isolated from the highly salty Urmia Lake of Iran. In this study, characterization of a new Halomonas isolate called Halomonas sp. TBZ3 and its employment for biodegradation of para-amino acetanilide (PAA), as an aromatic environmental pollutant, is described.

OBJECTIVES

This study aimed to characterize the TBZ3 isolate and to elucidate its ability as a biodegradative agent that decomposes PAA.

MATERIALS AND METHODS

Primarily, DNA-DNA hybridization between TBZ3, Halomonas denitrificans DSM18045T and Halomonas saccharevitans LMG 23976T was carried out. Para-amino acetanilide biodegradation was assessed using spectrophotometry and confirmed by gas chromatography-mass spectroscopy (GC-MS). Parameters effective on biodegradation of PAA were optimized by the Response Surface Methodology (RSM).

RESULTS

The DNA-DNA hybridization experiments between isolate TBZ3, H. denitrificans and H. saccharevitans revealed relatedness levels of 57% and 65%, respectively. According to GC-MS results, TBZ3 degrades PAA to benzene, hexyl butanoate, 3-methyl-1-heptanol and hexyl hexanoate. Temperature 32.92°C, pH 6.76, and salinity 14% are the optimum conditions for biodegradation with a confidence level of 95% (at level α = 0.05).

CONCLUSIONS

According to our results, Halomonas sp. TBZ3 could be considered as a biological agent for bioremediation of PAA and possibly other similar aromatic compounds.

Intracellular azo decolorization is coupled with aerobic respiration by a Klebsiella oxytoca strain

Reduction of azo dye methyl red coupled with aerobic respiration by growing cultures of Klebsiella oxytoca GS-4-08 was investigated. In liquid media containing dye and 0.6 % glucose in a mineral salts base, 100 mg l(-1) of the dye are completely removed in 3 h under shaking conditions. The dye cannot be aerobically decolorized by strain GS-4-08 without extra carbon sources, indicating a co-metabolism process. Higher initial dye concentration prolonged the lag phase of the cell growth, but final cell concentrations of each batches reached a same level with range from 6.3 to 7.6 mg l(-1) after the dye adaption period. This strain showed stronger dye tolerance and decolorization ability than many reported strains. Furthermore, a new intracellular oxygen-insensitive azoreductase was isolated from this strain, and the specific activity of enzyme was 0.846 and 0.633 U mg(-1) protein in the presence of NADH and NADPH, respectively. N,N dimethyl-p-phenylenediamine and anthranilic acid were stoichiometrically released from MR dye, indicating the breakage of azo bonds accounts for the intracellular decolorization. Combining the characteristics of azoreductase, the stoichiometry of EMP, and TCA cycle, the electron transfer chain theory of aerobic respiration, and the possible mechanism of aerobic respiration coupled with azo reduction by K. oxytoca GS-4-08 are proposed. This study is expected to provide a sound theoretical basis for the development of the K. oxytoca strain in aerobic process for azo dye containing wastewaters.

Biodegradation of organic pollutants in saline wastewater by halophilic microorganisms: a review

Agro-food, petroleum, textile, and leather industries generate saline wastewater with a high content of organic pollutants such as aromatic hydrocarbons, phenols, nitroaromatics, and azo dyes. Halophilic microorganisms are of increasing interest in industrial waste treatment, due to their ability to degrade hazardous substances efficiently under high salt conditions. However, their full potential remains unexplored. The isolation and identification of halophilic and halotolerant microorganisms from geographically unrelated and geologically diverse hypersaline sites supports their application in bioremediation processes. Past investigations in this field have mainly focused on the elimination of polycyclic aromatic hydrocarbons and phenols, whereas few studies have investigated N-aromatic compounds, such as nitro-substituted compounds, amines, and azo dyes, in saline wastewater. Information regarding the growth conditions and degradation mechanisms of halophilic microorganisms is also limited. In this review, we discuss recent research on the removal of organic pollutants such as organic matter, in terms of chemical oxygen demand (COD), dyes, hydrocarbons, N-aliphatic and N-aromatic compounds, and phenols, in conditions of high salinity. In addition, some proposal pathways for the degradation of aromatic compounds are presented.

Flocculation of Quaternary Chitosan on Acid Dyeing Waste Water

In order to increase the positively charge, solubility in water and grafted degree of chitosan, quaternary chitosan was synthesized with chitosan and glycidyl-trimethyl-ammonium chloride by the heterogeneous reaction. FT-IR was used to characterize the structure of the synthesized. The quaternary chitosan was then used to treat simulated acid dyeing wastewater, the effect of quaternary chitosan concentration, agitation mode and pH values on flocculation were discussed. The results indicated that the H+ in nucleophilic center-NH2 was displaced by-CH2CH(OH)CH2N+(CH3)3 and the 2-hydroxypropyltrimethyl ammonium chloride chitosan (quaternary chitosan) was synthesized. When applied to treatment of acid dye waste water, the decolorization rate was 95.5%, and the COD removal was 86.4%.