Effect of operating temperatures on the microbial community profiles in a high cell density hybrid anaerobic bioreactor

Nano-Fe mediated treatment of real hydraulic fracturing flowback and its practical implication on membrane fouling in tandem anaerobic-oxic membrane bioreactor

The rising water-use intensity, and lack of cost-effective treatment strategy and reuse of hydraulic fracturing flowback (HFF) has become an increasing cause of concern. The present work evaluates the integration of parallel sets of tandem anaerobic-oxic membrane bioreactor (AMBR) with and without nano-Fe for treatment and reuse of real HFF obtained from Ordos Basin, China. Treatment efficiencies in terms of organic conversions, micro-pollutants degradation, resource recovery, and effects of nano-Fe release on membrane fouling were evaluated. Nano-Fe mediated AMBR (FAMBR) system effectively reduce target micro-pollutants (such as Acenaphthylene) at 94.4 % compared to the parallel AMBR system (17.1 % without nano-Fe). Moreover, recovery of potential economic chemicals like Al and P (1.0 and 0.6 mg/g spent nano-Fe) availed using FAMBR system. However, colonization of FAMBR membrane surface by Fe-protein/peptide hydroxocomplexes initiated by Fe-catalyzed microbial extrusions present a huge fouling challenge relative to the AMBR system. Additional evidences from microscopic/spectroscopic analysis of the FAMBR membrane system revealed that despite having a promising outlook, mediation of nano-Fe with AMBR system might result in a major fouling event during HFF treatment. Engineered design of nano-Fe to reduced leached nano-Fe ions in pre-treatment step prior to AMBR treatment system may be of potential research consideration.

Feedforward neural network model estimating pollutant removal process within mesophilic upflow anaerobic sludge blanket bioreactor treating industrial starch processing wastewater

In this a, three-layered feedforward-backpropagation artificial neural network (BPANN) model was developed and employed to evaluate COD removal an upflow anaerobic sludge blanket (UASB) reactor treating industrial starch processing wastewater. At the end of UASB operation, microbial community characterization revealed satisfactory composition of microbes whereas morphology depicted rod-shaped archaea. pH, COD, NH₄⁺, VFA, OLR and biogas yield were selected by principal component analysis and used as input variables. Whilst tangent sigmoid function (tansig) and linear function (purelin) were assigned as activation functions at the hidden-layer and output-layer, respectively, optimum BPANN architecture was achieved with Levenberg-Marquardt algorithm (trainlm) after eleven training algorithms had been tested. Based on performance indicators such the mean squared errors, fractional variance, index of agreement and coefficient of determination (R²), the BPANN model demonstrated significant performance with R² reaching 87%. The study revealed that, control and optimization of an anaerobic digestion process with BPANN model was feasible.

Anaerobic stabilization of waste activated sludge at different temperatures and solid retention times: Evaluation by sludge reduction, soluble chemical oxygen demand release and dehydration capability

Anaerobic treatment is the most widely used method of waste activated sludge (WAS) stabilization. Using a semi-continuous stirring tank with condensed WAS, we investigated effects of decreasing the solid retention time (SRT) from 32days to 6.4days on sludge reduction, soluble chemical oxygen demand (SCOD) release and dehydration capability, along with anaerobic digestion operated at medium temperature (MT-AD) or anaerobic digestion operated at room temperature (RT-AD). Results showed that effects of temperature on SCOD release were greater at SRT of 32d and 6.4d. When SRT was less than 8d, total solids (TS), volatile solids (VS) and capillary suction time (CST) did not change significantly. CST was lowest at SRT of 10.7days, indicating best condition for sludge dehydration. Principal component analysis (PCA) showed that the most optimum SRT was higher than 10.7d both in MT-AD or RT-AD.

Combination of Fenton processes and biotreatment for wastewater treatment and soil remediation

There is a continuously increasing worldwide concern for the development of wastewater and contaminated soil treatment technologies. Fenton processes and biological treatments have long been used as common technologies for treating wastewater and polluted soil but they still need to be modified because of some defects (high costs of Fenton process and long remediation time of biotreatments). This work first briefly introduced the Fenton technology and biotreatment, and then discussed the main considerations in the construction of a combined system. This review shows a critical overview of recent researches combining Fenton processes (as pre-treatment or post-treatment) with bioremediation for treatment of wastewater or polluted soil. We concluded that the combined treatment can be regarded as a novel and competitive technology. Furthermore, the outlook for potential applications of this combination in different polluted soil and wastewater, as well as the mechanism of combination was also discussed.

454-Pyrosequencing Reveals Microbial Community Structure and Composition in a Mesophilic UAFB System Treating PTA Wastewater

To well understand the community structure and composition of mesophilic microorganisms in anaerobic system fed with PTA wastewater, an up-flow anaerobic fixed bed reactor was continuously run at 33 and 37 °C for 75 and 60 days, respectively. Both fluorescence in situ hybridization analysis and 454-pyrosequencing were applied to investigate the microbial distinction within mesophilic ranges. A preferable performance was achieved at 37 than 33 °C. The taxonomic complexities of two samples were further compared at phylum, class, and genus levels. Notably, microbial diversity differed a lot and the change of populations was observed mainly in the shared OTUs. Genus level analysis showed that when temperature was increased to 37 °C, the abundance of Thauera and Hydrogenophaga (β-Proteobacteria) decreased by 93.75 and 61.47 %, respectively, whereas that of Syntrophorhabdus (δ-Proteobacteria) increased from 4.93 to 16.01 %. Furthermore, the dominant archaeal Methanobacterium at both temperatures indicated the prevailing contribution of hydrogenotrophic methanogens in mesophilic anaerobic system.

Bacterial community dynamics in a swine wastewater anaerobic reactor revealed by 16S rDNA sequence analysis

Anaerobic digestion is a microbiological process of converting organic wastes into digestate and biogas in the absence of oxygen. In practice, disturbance to the system (e.g., organic shock loading) may cause imbalance of the microbial community and lead to digester failure. To examine the bacterial community dynamics after a disturbance, this study simulated an organic shock loading that doubled the chemical oxygen demand (COD) loading using a 4.5L swine wastewater anaerobic completely stirred tank reactor (CSTR). Before the shock (loading rate=0.65gCOD/L/day), biogas production rate was about 1-2L/L/day. After the shock, three periods representing increased biogas production rates were observed during days 1-7 (∼4.0L/L/day), 13 (3.3L/L/day), and 21-23 (∼6.1L/L/day). For culture-independent assessments of the bacterial community composition, the 454 pyrosequencing results indicated that the community contained >2500 operational taxonomic units (OTUs) and was dominated by three phyla: Bacteroidetes, Firmicutes, and Proteobacteria. The shock induced dynamic changes in the community composition, which was re-stabilized after approximately threefold hydraulic retention time (HRT). Intriguingly, upon restabilization, the community composition became similar to that observed before the shock, rather than reaching a new equilibrium.

Impact of abrupt temperature increase on the performance of an anaerobic hybrid bioreactor and its intrinsic microbial community

This study aimed to analyse the effect of sudden temperature increases (in the range of 45-65 °C) on the performance and the microbial community structure of a hybrid anaerobic reactor. The reactor recovered with time after every temperature shock up to the operating temperature of 55 °C. At 55 °C, a 10 °C shock resulting in an operating temperature of 65 °C, deteriorated the reactor's performance. At this condition, both, the diversity and the relative abundance of methanogenic groups, especially of Methanosaetaceae, were significantly affected as observed by DGGE fingerprinting and quantitative PCR. In contrast, at lower temperatures (i.e., 45 and 55 °C), thermal shocks seemed to have less effect due to the presence and maintenance of thermophilic strains, which prevented system deterioration. At 65 °C, the absence of any acetoclastic methanogen is assumed to be the cause of system failure.

Biomethane production and dynamics of microflora in response to copper treatments during mesophilic anaerobic digestion

This study discussed the effects of different concentrations (0.625, 1.875 and 3.125 mM) of copper (Cu) in the form of CuSO4 on biomethane production and on the dynamics of microbial communities during the mesophilic anaerobic digestion (AD) of cow manure. The effects on biomethane production were found to depend on CuSO4 concentrations. After 50 days of AD, treatment A3 (3.125 mM) had lower cumulative biomethane production than the no-Cu control. The maximum value of cumulative biomethane production was detected under treatment A2 (1.875 mM). These results suggested that the stimulation or inhibition to biomethane production might be related to the concentration and chemical forms of Cu. Moreover, polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) was used to discuss the dynamics of microbial communities. Results revealed that different concentrations of CuSO4 had effects on the richness and diversity of bacterial and archaeal communities. The predominance of Bacteroidetes bacterium (GU339485.1) was verified through the sequencing of the dominant DGGE bands. Furthermore, Bacteroidetes bacterium could be detected during the whole AD process and is adaptable to a certain concentration range of CuSO4.

Carbon source--a strong determinant of microbial community structure and performance of an anaerobic reactor

Industrial effluents differ in their organic composition thereby providing different carbon sources to the microbial communities involved in its treatment. This study aimed to investigate the correlation of microbial community structure with wastewater composition and reactor's performance. Self-immobilized granules were developed in simulated wastewater based on different carbon sources (glucose, sugarcane molasses, and milk) in three hybrid anaerobic reactors operated at 37°C. To study archaeal community structure, a polyphasic approach was used with both qualitative and quantitative analysis. While PCR-denaturing gradient gel electrophoresis of 16S rRNA gene did not reveal major shifts in diversity of archaea with change in substrate, quantification of different groups of methanogens and total bacteria by real-time PCR showed variations in relative abundances with the dominance of Methanosaetaceae and Methanobacteriales. These data were supported by differences in the ratio of total counts of archaea and bacteria analyzed by catalyzed reporter deposition - fluorescence in situ hybridization. During hydraulic and organic shocks, the molasses-based reactor showed the best performance followed by the milk- and the glucose-based reactor. The study indicates that carbon source shapes the microbial community structure more in terms of relative abundance with distinct metabolic capacities rather than its diversity itself.

Changes in microbial communities in a hybrid anaerobic reactor with organic loading rate and temperature

Poor understanding of the response of microbial communities to sudden changes in organic and hydraulic loads is one of the major reasons for the inability to prevent operational instabilities in anaerobic reactors. Effect of changes in hydraulic retention time (HRT) and organic loading rate (OLR) on reactor performance and its anaerobic microbial community were investigated in two anaerobic hybrid reactors operated at 37 and 55 °C. HRT was reduced stepwise, while OLR was increased along with influent chemical oxygen demand at fixed HRT until the performance of reactor deteriorated. The profile of archaeal 16S rRNA gene amplicons, resolved by denaturing gradient gel electrophoresis, reflected system status during disturbances. The more diverse archaeal community in the reactor operated at 37 °C showed better performance than the communities present at 55 °C at higher OLR and shorter HRT, suggesting that higher diversity is indicative of more stable operation of reactors despite organic and hydraulic shocks.

Impact of temperature, microwave radiation and organic loading rate on methanogenic community and biogas production during fermentation of dairy wastewater

This study analyzed dairy wastewater fermentation in convection- and microwave-heated hybrid reactors at loadings of 1 and 2 kg COD/(m3 d) and temperatures of 35 and 55 °C. The biomass was investigated at a molecular level to determine the links between the operational parameters of anaerobic digestion and methanogenic Archaea structure. The highest production of biogas with methane content of ca. 67% was noted in the mesophilic microwave-heated reactors. The production of methane-rich biogas and the overall diversity of Archaea was determined by Methanosarcinaceae presence. The temperature and the application of microwaves were the main factors explaining the variations in the methanogen community. At 35 °C, the microwave heating stimulated the growth of highly diverse methanogen assemblages, promoting Methanosarcina barkeri presence and excluding Methanosarcina harudinacea from the biomass. A temperature increase to 55 °C lowered Methanosarcinaceae abundance and induced a replacement of Methanoculleus palmolei by Methanosarcina thermophila.

Performance and energy economics of mesophilic and thermophilic digestion in anaerobic hybrid reactor treating coal wastewater

Two anaerobic hybrid AHRs (AHR), mesophilic (35 °C) and thermophilic (55 °C) were operated with coal wastewater at different hydraulic retention times (HRT) ranging from 3-0.5 to 3.12-0.6d with organic loading rates (OLR) of 1.12-6.72 g L(-1) d(-1). Synthetic coal wastewater with an average chemical oxygen demand (COD) of 2240 mg L(-1) and phenolics concentration of 752 mg L(-1) was used as substrate. At each HRT, the thermophilic AHR gave a better performance, measured in terms of phenolics/COD removal and gas production. The specific methane yield was also higher for thermophilic AHR at each HRT compared to mesophilic one. The volatile fatty acid concentration in the effluent increased with the lowering of HRT. The Stover-Kincannon model was applicable at both temperatures and showed higher substrate utilization in thermophilic AHR. Energy economic study of the AHRs revealed that 11,938 MJ d(-1) more energy can be generated using thermophilic AHR than mesophilic.

Lipid and fatty acid profile of Geobacillus kaustophilus in response to abiotic stress

Geobacillus kaustophilus is an important food-borne, spore-forming, thermotolerant bacterium. It has a good potential for biotransformation of steroid hormones, such as progesterone and testosterone. In this study, we report G. kaustophilus membrane lipid modifications in response to temperature shock, salinity, incubation time, and pH. Total lipids significantly increased in response to increasing temperature, incubation time, and salt concentration. However, the bacterium presented a significant decrease in the accumulation of total lipids in response to pH shock. The ratio of branched-chain fatty acids/straight-chain fatty acids decreased significantly under all stress conditions. With an increase in temperature, incubation time, and salt concentration, the ratio of iso-fatty acids/anteiso-fatty acids increased significantly, while this ratio remained unaffected by changes in the pH of the growth medium. Our results suggest a modification occurs in the bacterial membrane structure in response to temperature, salinity, incubation time, and pH shock. The variable abiotic stress resulted in a multiple increase in odd-numbered-carbon and low-melting-point anteiso-branched-chain fatty acids, helping the membrane keep its integrity, fluidity, and function for growth of the bacteria under abiotic stress conditions.