Preparation of wheat straw based superabsorbent resins and their applications as adsorbents for ammonium and phosphate removal

Sustainable adsorbent frameworks based on bio-resourced materials and biodegradable polymers in selective phosphate removal for waste-water remediation

Phosphorus to an optimum extent is an essential nutrient for all living organisms and its scarcity may cause food security, and environmental preservation issues vis-à-vis agroeconomic hurdles. Undesirably excess phosphorus intensifies the eutrophication problem in non-marine water bodies and disrupts the natural nutrient balance of the ecosystem. To overcome such dichotomy, biodegradable polymer-based adsorbents have emerged as a cost-effective and implementable approach in striking a "desired optimum-undesired excess" balance pertaining to phosphate in a sustainable manner. So far, the reports on adopting such adsorbent-approach for wastewater remediation remained largely scattered, unstructured, and poorly correlated. In this background, the contextual review comprehensively discusses the current state-of-the-art in utilizing biodegradable polymeric frameworks as an adsorbent system for phosphate removal and its efficient recovery from the aquatic ecosystem, while highlighting their characteristics-specific functional efficiency vis-à-vis easiness of synthetic and commercial viability. The overview further delves into the sources and environmental ramifications of excessive phosphorus in water bodies and associated mechanistic pathways of phosphorus removal via adsorption, precipitation, and membrane filtration enabled by biodegradable (natural and synthetic) polymeric substrates. Finally, functionality optimization, degradability tuning, and adsorption selectivity of biodegradable polymers are highlighted, while aiming to strike a balance in "removal-recovery-reuse" dynamics of phosphate. Thus, the current review not only paves the way for future exploration of biodegradable polymers in sustainable cost-effective adsorbents for phosphorus removal but also can serve as a guide for researchers dealing with this critical issue.

Cellulose/nanocellulose superabsorbent hydrogels as a sustainable platform for materials applications: A mini-review and perspective

Superabsorbent hydrogels (SAH) are crosslinked three-dimensional networks distinguished by their super capacity to stabilize a large quantity of water without dissolving. Such behavior enables them to engage in various applications. Cellulose and its derived nanocellulose can become SAHs as an appealing, versatile, and sustainable platform because of abundance, biodegradability, and renewability compared to petroleum-based materials. In this review, a synthetic strategy that reflects starting cellulosic resources to their associated synthons, crosslinking types, and synthetic controlling factors was highlighted. Representative examples of cellulose and nanocellulose SAH and an in-depth discussion of structure-absorption relationships were listed. Finally, various applications of cellulose and nanocellulose SAH, challenges and existing problems, and proposed future research pathways were listed.

Assessing the Capability of Chemical Ameliorants to Reduce the Bioavailability of Heavy Metals in Bulk Fly Ash Contaminated Soil

In-situ rehabilitation of fly ash at dumping sites has rarely been addressed for crop production due to growth-related constraints, largely of heavy metal (HM) contamination in soils and crops. Current communication deals with a novel approach to identify a suitable management option for rejuvenating the contaminated soils. In this background, a 60-days incubation experiment was conducted with different fly ash-soil mixtures (50 + 50%, A1; 75 + 25%, A2; 100 + 0%, A3) along with four ameliorants, namely, lime (T1), sodium sulphide (T2), di-ammonium phosphate (T3), and humic acid (T4) at 30 ± 2 °C to assess the ability of different fly ash-soil-ameliorant mixtures in reducing bio-availability of HMs. Diethylenetriaminepentaacetic acid (DTPA)-extractable bio-available HM contents for lead (Pb), cadmium (Cd), nickel (Ni), and chromium (Cr) and their respective ratios to total HM contents under the influence of different treatments were estimated at 0, 15, 30, 45, and 60 days of incubation. Further, the eco-toxicological impact of different treatments on soil microbial properties was studied after 60 days of experimentation. A1T1 significantly recorded the lowest bio-availability of HMs (~49-233% lower) followed by A2T1 (~35-133%) among the treatments. The principal component analysis also confirmed the superiority of A1T1 and A2T1 in this regard. Further, A1T1 achieved low contamination factor and ecological risk with substantial microbial biomass carbon load and dehydrogenase activity. Thus, liming to fly ash-soil mixture at 50:50 may be considered as the best management option for ameliorating metal toxicity. This technology may guide thermal power plants to provide the necessary package of practices for the stakeholders to revive their contaminated lands for better environmental sustainability.

Phosphate recovery from aqueous solution through adsorption by magnesium modified multi-walled carbon nanotubes

In this study, multi-walled carbon nanotubes modified by magnesium (Mg@CNT) was prepared as a novel adsorbent to recover phosphate from wastewater. Mg@CNT with the mass ratio of 0.48 (Mg versus MWCNTs) was the most efficient for phosphate adsorption and the maximum experimental adsorption capacity was up to 198 mg P/g. The Mg@CNT characterization was done by Field emission scanning electron microscope coupled with energy-dispersive spectroscopy detector (FESEM-EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), surface area analyzer (BET), Transmission electron microscope coupled with energy-dispersive spectroscopy detector (TEM-EDS). The MgO nanoflakes spread on the surface of multi-walled carbon nanotubes and reacted with phosphate to generate Mg₃(PO₄)₂·10H₂O as the end product. Phosphate adsorption on Mg@CNT was chemisorption onto heterogeneous surface according to the kinetic model and isotherm model fitting results. Several common co-existing ions, e.g., Cl^-, NO₃^- and humic acid, had no obvious negative impact on the phosphate adsorption capacity; while SO₄^2- and CO₃^2- expressed stronger negative impacts and led to 13.2% and 39.5% decrease in phosphate adsorption capacity, respectively. After five adsorption-desorption cycles, Mg@CNT still maintained more than 80% adsorption capacity of the initial and high phosphate desorbability. These results implied that Mg@CNT possessed great application potential in phosphate recovery.

Significant removal of ammonia nitrogen in low concentration from aqueous solution at low pH by advanced air stripping

In recent years, the excess discharge of ammonia nitrogen from wastewater into surface water has been regulated by more stringent standard. The air stripping method is successfully used to treatment of high-concentration ammonia nitrogen; however, alkali will be added to keep pH more than 10, which is costly and not environment-friendly operation. In this study, an advanced air stripping (AAS) based on foam separation of removing ammonia nitrogen in low concentration from aqueous solution at low pH was proposed. The effect of conditions such as air flow rate, temperature, SDS dosage, coexisting ionic strength, pH, and initial ammonia nitrogen concentration on the removal efficiency was studied. The advanced air stripping exhibited favorable removal efficiency for NH₄⁺-N in low concentration from aqueous solution (20 mg·L^-1) with a broad range of low pH 3.0-9.0. Besides, for strongly alkaline (pH=11.0) solution, the advanced air stripping can alleviate the decrease of pH to some extent and keep ammonia nitrogen stripping out continuously based on equilibrium shift between NH₄⁺ and NH₃. A microcalorimeter was applied to demonstrate the interaction between the negatively charged hydrophilic groups of SDS and NH₄⁺ ions, helping to understand the mechanisms more clearly. The simple operation and the satisfactory removal efficiency could imply that the advanced air stripping is a promising technology for minimizing low-concentration NH₄⁺-N.

Metabolic and transcriptional analysis of recombinant Saccharomyces?cerevisiae for xylose fermentation: a feasible and efficient approach

Lignocellulose is an abundant xylose-containing biomass found in agricultural wastes, and has arisen as a suitable alternative to fossil fuels for the production of bioethanol. Although Saccharomyces cerevisiae has been thoroughly used for the production of bioethanol, its potential to utilize lignocellulose remains poorly understood. In this work, xylose-metabolic genes of Pichia stipitis and Candida tropicalis, under the control of different promoters, were introduced into S. cerevisiae. RNA-seq analysis was use to examine the response of S. cerevisiae metabolism to the introduction of xylose-metabolic genes. The use of the PGK1 promoter to drive xylitol dehydrogenase (XDH) expression, instead of the TEF1 promoter, improved xylose utilization in ?XR-pXDH? strain by overexpressing xylose reductase (XR) and XDH from C. tropicalis, enhancing the production of xylitol (13.66 ? 0.54 g/L after 6 days fermentation). Overexpression of xylulokinase and XR/XDH from P. stipitis remarkably decreased xylitol accumulation (1.13 ? 0.06 g/L and 0.89 ? 0.04 g/L xylitol, respectively) and increased ethanol production (196.14% and 148.50% increases during the xylose utilization stage, respectively), in comparison with the results of XR-pXDH. This result may be produced due to the enhanced xylose transport, Embden?Meyerhof and pentose phosphate pathways, as well as alleviated oxidative stress. The low xylose consumption rate in these recombinant strains comparing with P. stipitis and C. tropicalis may be explained by the insufficient supplementation of NADPH and NAD+. The results obtained in this work provide new insights on the potential utilization of xylose using bioengineered S. cerevisiae strains.

Evaluation of phosphate adsorption by porous strong base anion exchangers having hydroxyethyl substituents: kinetics, equilibrium, and thermodynamics

Phosphate anions are recognized as the main responsible for the eutrophication of surface waters. In this work, two strong base anion exchangers having either N,N-dimethyl 2-hydroxyethylammonium (SBAEx.2M) or N,N-diethyl 2-hydroxyethylammonium (SBAEx.2E) functional groups, as highly efficient sorbents in the removal of phosphate anions, are presented. The influence of the main parameters (pH, contact time, initial concentration of phosphate, temperature) on the adsorption performances was investigated in batch mode. Modeling the kinetics data by Lagergren, Ho and McKay, and Elovich kinetic models indicated chemisorption as the main mechanism of sorption. The sorption at equilibrium was modeled with Langmuir, Freundlich, Sips, Dubinin-Radushkevich, and Temkin isotherm models. The experimental isotherms were the best fitted by Langmuir and Sips isotherms, the maximum sorption capacity for phosphate anions being 233.88 mg g^-1 SBAEx.2M and 223.5 mg g^-1 SBAEx.2E, at pH 3, and 23 °C. Adsorption of phosphate anions in competitive conditions showed that the interference with co-existing anions was low in the case of Cl^- ions and much higher with SO₄^2- ions, the ion exchange having an important contribution in the adsorption process. The adsorption was spontaneous and endothermic, the degree of spontaneity increasing with the increase of temperature. The high level of reusability, the adsorption capacity decreasing with only ~ 7% in the case of SBAEx.2E and with ~ 9% in the case of SBAEx.2M, after five sorption/desorption cycles, recommends these SBAEx as promising adsorbents for phosphate removal.

Wheat straw decomposition stage has little effect on the removal of inorganic N and P from wastewater leached through sand-straw mixes

Wheat straw amendment to sandy soil can remove nitrogen (N) and phosphorus (P) from wastewater but it is unclear whether prior decomposition affects removal. Sand mixed with finely ground wheat straw at 12.5 g straw kg^-1 was placed in leaching columns. Wastewater was added either immediately after mixing with straw (fresh straw) or after the sand-straw mix had been incubated moist for 7 or 14 days (7D or 14D straw). Sand alone was considered as control. Leaching was carried out 4, 8 or 16 days after addition of wastewater and inorganic N and P were analysed after leaching in both leachate and sand. In the amended treatments, nitrate and available P in the sand-straw mix were not detectable throughout the experiment. On day 16, inorganic N in the sand-straw mix was highest in fresh straw where it was three-fold higher than in 14D straw and 30% higher than in sand alone and 7D straw on day 16. Straw decomposition stage had no consistent effect on microbial biomass N and P. Released CO₂ was lower in 14D straw than in fresh straw and 7D straw. With straw amendment, > 95% of inorganic N added with wastewater was removed compared to 40-50% with sand alone. Inorganic P leaching was reduced by about 30% compared to sand alone on day 16. In conclusion, wheat straw addition reduced leaching of N compared to sand alone, but the decomposition stage of the straw had little effect on the removal of N and P from wastewater.

Synchronous removal of ammonium and phosphate from swine wastewater by two agricultural waste based adsorbents: Performance and mechanisms

Two agricultural wastes, Chinese medicinal herbal residue and spent Pleurotus ostreatus substrate, were developed to remove ammonium and phosphate from swine wastewater. These adsorbents were mesoporous materials with abundant smooth layered pores, and rough protuberances and grooves, respectively. Their adsorption capacities were 1131.65 and 1631.79 mg N g^-1, and 63.41 and 62.58 mg P g^-1 at pH 8.0, dosage of 0.2 g L^-1 and contact time of 360 min. And kinetics data of ammonium and phosphate fitted best with the intra-particle diffusion and pseudo-second-order models, respectively. Based on the point of zero charge, FTIR and XPS analyses, ammonium was removed mainly by electrostatic attraction, ion exchange and surface precipitation, while phosphate was by ligand exchange, surface complexation and precipitation. Therefore, the two agricultural wastes have great potential to synchronously remove ammonium and phosphate from swine wastewater.

Smart agriculture for food quality: facing climate change in the 21st century

Climate change, with increasing temperatures and atmospheric carbon dioxide levels, constitutes a severe threat to the environment and all living organisms. In particular, numerous studies suggest severe consequences for the health of crop plants, affecting both the productivity and quality of raw material destined to the food industry. Of particular concern is the reduction of proteins and essential micronutrients as iron and zinc in crops. Fighting this alarming trends is the challenge of Climate-Smart Agriculture with the double goal of reducing environmental impacts (use of pesticides, nitrogen and phosphorus leaching, soil erosion, water depletion and contamination) and improving raw material and consequently food quality. Organic farming, biofertilizers and to a lesser extent nano-carriers, improve the antioxidant properties of fruits, but the data about proteins and micronutrients are rather contradictory. On the other hand, advanced devices and Precision Agriculture allow the cultivations to be more profitable, efficient, contributing more and more to reduce pest diseases and to increase the quality of agricultural products and food safety. Thus, nowadays adoption of technologies applied to sustainable farming systems is a challenging and dynamic issue for facing negative trends due to environmental impacts and climate changes.

Corn stalk as starting material to prepare a novel adsorbent via SET-LRP and its adsorption performance for Pb(II) and Cu(II)

Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH2OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g-1 and 94.72 mg g-1, and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.

Adsorption of Ammonium Nitrogen from Aqueous Solution on Chemically Activated Biochar Prepared from Sorghum Distillers Grain

Chemically activated biochars prepared from sorghum distillers grain using two base activators (NaOH and KOH) were investigated for their adsorption properties with respect to ammonium nitrogen from aqueous solution. Detailed characterizations, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetry (TG), and specific surface area analyses, were carried out to offer a broad evaluation of the prepared biochars. The results showed that the NaOH- and KOH-activated biochars exhibited significantly enhanced adsorption capacity, by 2.93 and 4.74 times, respectively, in comparison with the pristine biochar. Although the NaOH-activated biochar possessed larger specific surface area (132.8 and 117.7 m2/g for the NaOH- and KOH-activated biochars, respectively), the KOH-activated biochar had higher adsorption capacity owing to its much higher content of functional groups. The adsorption kinetics and isotherms of the KOH-activated biochar at different temperatures were further studied. The biochar had a maximum adsorption capacity of 14.34 mg/g at 45 °C, which was satisfactory compared with other biochars prepared using different feedstocks. The adsorption process followed pseudo-second-order kinetics, and chemical adsorption was the rate-controlling step. The equilibrium data were consistent with the Freundlich isotherm, and the thermodynamic parameters suggested that the adsorption process was endothermic and spontaneous. Consequently, this work demonstrates that chemically activated biochar from sorghum distillers grain is effective for ammonium nitrogen removal.

Using Recycled Concrete as an Adsorbent to Remove Phosphate from Polluted Water

Phosphate pollution remains a significant hazard to terrestrial and aquatic ecosystems. We developed an economical and efficient method for phosphate adsorption on waste construction concrete modified with seawater. Compared with raw concrete materials, the phosphate adsorption capacity of seawater-modified waste concrete was highly efficient, especially at low phosphate concentrations. The inflection point for seawater-modified concrete was 0.66 and 1.22 mg L for the raw material. The relative phosphate adsorption was 4.64 and 2.39 mg g, respectively. Phosphate removal was >90% over a pH range of 3 to 11 for the raw and modified materials. Chemical and physical analysis of the modified concrete indicated that Ca and Mg particles were uniformly sequestrated on the surface, and Ca was the determinant controlling phosphate uptake. Phosphate adsorption isotherms fit well using the Freundlich, Temkin, Elovich, Fowler-Guggenheim, and Hill-de Boer models and indicated that intermolecular forces in the concrete particles were enhanced by calcium oxides from seawater. This method can efficiently remove phosphate from polluted water and repurposes waste construction concrete.

Rapid removal of ammonia nitrogen in low-concentration from wastewater by amorphous sodium titanate nano-particles

An amorphous sodium titanate (ST) nano-particle was prepared via the facile hydrolytic process with the addition of sodium hydroxide and firstly used for ammonia nitrogen (NH₃-N) removal from wastewater. ST exhibited satisfactory adsorption efficiency for NH₃-N simulative wastewater (20 mg·L^-1) at a wide range of pH 3.0-9.0, within a minimum contact time of 10 min. The Langmuir isotherm showed that the maximum adsorption capacity (298 K) of the adsorbent was reach up to 44.54 mg·g^-1. Concentrated competing cations had some interferences with NH₃-N adsorption at the order of Ca²⁺ > K⁺ > Mg²⁺ > Na⁺ according to their competition on adsorption sites. During the adsorption process, cation exchange between Na⁺ and NH₄⁺ played a powerful role for the NH₃-N removal and the contribution of Ti-OH groups was also involved in the adsorption. The regeneration test showed that the saturated adsorbents could be conveniently regenerated just by NaOH or NaCl solution treatment and there was no obvious decline of the adsorption capacity after reused for five times. The facile method of fabrication and regeneration, the rapid adsorption process and the satisfactory adsorption efficiency make sodium titanate a promising adsorbent for low concentration NH₃-N minimization.

Synthesis of a Novel and Salt Sensitive Superabsorbent Hydrogel Using Soybean Dregs by UV-Irradiation

A biomass based hydrogel soybean dregs-Poly(acrylic acid) (SD-PAA) was synthesized under UV radiation while using agricultural waste soybean dregs. Maximum absorption of SD-PAA is 3587 g·g⁻¹ in distilled water and 302.0 g·g⁻¹ in 150 mM NaCl aqueous solution. Moreover, the influence of granularity, salt solution, and ions in the solutions on water absorption is systematically studied. Sensitivity sequence of the hydrogel to cations was K⁺ < Na⁺ < NH₄⁺ < Al³⁺ < Fe³⁺ < Mg²⁺ < Ca²⁺, and that to anions was PO₄³⁻ > SO₄²⁻ > Cl⁻. Moreover, the experimental results showed that SD-PAA water retention capability remained 37% after centrifugating for 60 min and 0.2% being dried at 60 °C for 70 h. Meanwhile, the swelling data agree well with the pseudo-second-order kinetic model and Fickian diffusion mechanism.

Removing ammonium from water and wastewater using cost-effective adsorbents: A review

Ammonium is an important nutrient in primary production; however, high ammonium loads can cause eutrophication of natural waterways, contributing to undesirable changes in water quality and ecosystem structure. While ammonium pollution comes from diffuse agricultural sources, making control difficult, industrial or municipal point sources such as wastewater treatment plants also contribute significantly to overall ammonium pollution. These latter sources can be targeted more readily to control ammonium release into water systems. To assist policy makers and researchers in understanding the diversity of treatment options and the best option for their circumstance, this paper produces a comprehensive review of existing treatment options for ammonium removal with a particular focus on those technologies which offer the highest rates of removal and cost-effectiveness. Ion exchange and adsorption material methods are simple to apply, cost-effective, environmentally friendly technologies which are quite efficient at removing ammonium from treated water. The review presents a list of adsorbents from the literature, their adsorption capacities and other parameters needed for ammonium removal. Further, the preparation of adsorbents with high ammonium removal capacities and new adsorbents is discussed in the context of their relative cost, removal efficiencies, and limitations. Efficient, cost-effective, and environmental friendly adsorbents for the removal of ammonium on a large scale for commercial or water treatment plants are provided. In addition, future perspectives on removing ammonium using adsorbents are presented.

Effect of humic acid preloading on phosphate adsorption onto zirconium-modified zeolite

A zirconium-modified zeolite (ZrMZ) was prepared, and then, humic acid (HA) was immobilized on the ZrMZ surface to prepare HA-loaded ZrMZ (HA-ZrMZ). The obtained ZrMZ and HA-ZrMZ were characterized by energy dispersive X-ray spectroscopy, elemental analyzer, N₂ adsorption/desorption isotherms, pH at the point of zero charge, and X-ray photoelectron spectroscopy. The adsorption characteristics of phosphate on ZrMZ and HA-ZrMZ were comparatively investigated in batch mode. The adsorption mechanism of phosphate on ZrMZ and HA-ZrMZ was investigated by ionic strength effect and ³¹P nuclear magnetic resonance. The mechanism for phosphate adsorption onto ZrMZ was the formation of inner-sphere phosphate complexes at the solid/solution interface. The preloading of HA on ZrMZ reduced the phosphate adsorption capacity, and the more the HA loading amount, the lower the phosphate adsorption capacity. However, the preloading of HA on ZrMZ did not change the phosphate adsorption mechanism; i.e., the formation of inner-sphere phosphate surface complexes was still responsible for the adsorption of phosphate on HA-ZrMZ. The decreased phosphate adsorption capacity for ZrMZ after HA coating could be attributed to the fact that the coating of HA on ZrMZ reduced the amount of binding active sites available for phosphate adsorption, changed the adsorbent surface charges, and reduced the specific surface areas and pore volumes of ZrMZ.

Characteristics of simultaneous ammonium and phosphate adsorption from hydrolysis urine onto natural loess

Nutrient recovery from human urine is a promising pretreatment of domestic wastewater and provides a sustainable recyclability of N and P. In this study, batch experiments were conducted to identify the characteristics of natural loess (NL) for the adsorption and recovery of ammonium and phosphate from hydrolysis urine (HU). The adsorption mechanisms, the adsorption kinetics and isotherms, as well as the major influencing factors, such as pH and temperature, were investigated. Results revealed that adsorption of ammonium occurred by means of ion exchange and molecule adsorption with the ≡ Si-OH groups, while phosphate adsorption was based on the calcium phosphate precipitation reaction and formation of inner-sphere complexes with ≡ M-OH groups. The adsorption processes of ammonium and phosphate were well described by the pseudo-second-order kinetic model and the Freundlich isotherm model. Adsorption of phosphate was endothermic, while ammonium adsorption was exothermic. Furthermore, the maximum ammonium and phosphate adsorption capacities of NL was 23.24 mg N g(-1) and 4.01 mg P g(-1) at an initial pH of 9 and 10, respectively. Results demonstrated that nutrient-adsorbed NL used as compound fertilizer or conventional fertilizer superaddition was feasible for its high contents of N and P as well as its environmental friendliness.

Synthesis of a starch derivative and its application in fertilizer for slow nutrient release and water-holding

A biomass based coated fertilizer was developed, which plays an important role in retarding nutrient release and holding water in soil.