Lignin-based polyoxyethylene ether enhanced enzymatic hydrolysis of lignocelluloses by dispersing cellulase aggregates

Improve Enzymatic Hydrolysis of Lignocellulosic Biomass by Modifying Lignin Structure via Sulfite Pretreatment and Using Lignin Blockers

Even traditional pretreatments can partially remove or degrade lignin and hemicellulose from lignocellulosic biomass for enhancing its enzymatic digestibility, the remaining lignin in pretreated biomass still restricts its enzymatic hydrolysis by limiting cellulose accessibility and lignin-enzyme nonproductive interaction. Therefore, many pretreatments that can modify lignin structure in a unique way and approaches to block the lignin’s adverse impact have been proposed to directly improve the enzymatic digestibility of pretreated biomass. In this review, recent development in sulfite pretreatment that can transform the native lignin into lignosulfonate and subsequently enhance saccharification of pretreated biomass under certain conditions was summarized. In addition, we also reviewed the approaches of the addition of reactive agents to block the lignin’s reactive sites and limit the cellulase-enzyme adsorption during hydrolysis. It is our hope that this summary can provide a guideline for workers engaged in biorefining for the goal of reaching high enzymatic digestibility of lignocellulose.

Understanding of promoting enzymatic hydrolysis of combined hydrothermal and deep eutectic solvent pretreated poplars by Tween 80

In this study, lignin blockers including non-catalytic protein and surfactants were employed to promote enzymatic digestibility of pretreated poplars. Among them, Tween 80 exhibited the most pronounced facilitation, improving the glucose yield from 26.6% to 99.6% at a low enzyme loading (10 FPU/g glucan), and readily reduced the required cellulase loading by 75%. The underlying mechanism for this remarkable improvement on glucose yields by Tween 80 was elucidated. The impacts of Tween 80 on the enzyme-lignin interaction were explored by quartz crystal microbalance analysis, revealing that the binding rate of Tween 80 on lignin surfaces was 3-fold higher than that of enzyme. More importantly, Tween 80 remarkably decreased the binding capacity and binding rate of enzyme on lignins. Furthermore, the substrate properties dominating the increase in glucose yields with Tween 80 were explored. The results facilitate to understand the underlying mechanism of the promotion of surfactants on enzymatic hydrolysis.

Revealing the mechanism of surfactant-promoted enzymatic hydrolysis of dilute acid pretreated bamboo

To improve the enzymatic digestibility of dilute acid pretreated bamboo residue (DABR), surfactants including PEG 4000 and Tween 80 were added to prevent the non-productive adsorption between residual lignin and enzyme. At the optimal loadings (e.g., 0.2 and 0.3 g surfactant/g lignin), the enzymatic digestibility of DABR improved from 29.4% to 64.6% and 61.6% for PEG 4000 and Tween 80, respectively. Furthermore, the promoting mechanism of these surfactants on enzymatic hydrolysis was investigated by real-time surface plasmon resonance (SPR) and fluorescence spectroscopy. Results from SPR analysis showed that Tween 80 outperformed PEG 4000 in terms of dissociating the irreversible cellulase adsorption onto lignin. Fluorescence quenching mechanism revealed that PEG 4000 and Tween 80 intervened the interaction between lignin and cellulase by hydrogen bonds/Van der Waals and hydrophobic action, respectively. This work provided an in-depth understanding of the mechanisms of PEG 4000 and Tween 80 on enhancing the enzymatic hydrolysis efficiency.

Current understanding and optimization strategies for efficient lignin-enzyme interaction: A review

From energy perspective, with abundant polysaccharides (45-85%), the renewable lignocellulosic is recognized as the 2nd generation feedstock for bioethanol and bio-based products production. Enzymatic hydrolysis is a critical pathway to yield fermentable monosaccharides from pretreated substrates of lignocellulose. Nevertheless, the lignin presence in lignocellulosic substrates leads to the low substrate enzymatic digestibility ascribed to the nonproductive adsorption. It has been reported that the water-soluble lignin (low molecular weight, sulfonated/sulfomethylated and graft polymer) enhance the rate of enzymatic digestibility, however, the catalytic mechanism of lignin-enzyme interaction remains elusive. In this review, optimization strategies for enzymatic hydrolysis based on the lignin structural modification, enzyme engineering, and different additives are critically reviewed. Lignin-enzyme interaction mechanism is also discussed (lignin and various cellulases). In addition, the mathematical models and simulation of lignin, cellulose and enzyme aims for promoting an integrated biomass-conversion process for sustainable production of value-added biofuels.

Recent advances in understanding the effects of lignin structural characteristics on enzymatic hydrolysis

Enzymatic hydrolysis of lignocellulose for bioethanol production shows a great potential to remit the rapid consumption of fossil fuels, given the fact that lignocellulose feedstocks are abundant, cost-efficient, and renewable. Lignin results in low enzymatic saccharification by forming the steric hindrance, non-productive adsorption of cellulase onto lignin, and deactivating the cellulase. In general, the non-productive binding of cellulase on lignin is widely known as the major cause for inhibiting the enzymatic hydrolysis. Pretreatment is an effective way to remove lignin and improve the enzymatic digestibility of lignocellulose. Along with removing lignin, the pretreatment can modify the lignin structure, which significantly affects the non-productive adsorption of cellulase onto lignin. To relieve the inhibitory effect of lignin on enzymatic hydrolysis, enormous efforts have been made to elucidate the correlation of lignin structure with lignin-enzyme interactions but with different views. In addition, contrary to the traditional belief that lignin inhibits enzymatic hydrolysis, in recent years, the addition of water-soluble lignin such as lignosulfonate or low molecular-weight lignin exerts a positive effect on enzymatic hydrolysis, which gives a new insight into the lignin-enzyme interactions. For throwing light on their structure-interaction relationship during enzymatic hydrolysis, the effect of residual lignin in substrate and introduced lignin in hydrolysate on enzymatic hydrolysis are critically reviewed, aiming at realizing the targeted regulation of lignin structure for improving the saccharification of lignocellulose. The review is also focused on exploring the lignin-enzyme interactions to mitigate the negative impact of lignin and reducing the cost of enzymatic hydrolysis of lignocellulose.

The hydrothermal-alkaline/oxygen two-step pretreatment combined with the addition of surfactants reduced the amount of cellulase for enzymatic hydrolysis of reed

This study aimed to provide a low cost feasible pretreatment and enzymatic hydrolysis (EH) method for the effective dissolution of xylan and the high glucan digestibility of reed with a low enzyme loading. The combination of polyethylene glycol (PEG) 3000-enhanced EH and hydrothermal-alkaline/oxygen pretreatment was studied. Process conditions were optimized through response surface methodology. Three models of glucan conversion rate, pretreated solids yield and lignin removal rate were established, and their determination coefficient (R²) values were 0.9218, 0.7939, and 0.8156, respectively. The models and experiments were reliable and significant. The optimal conditions favored 94.5% xylan dissolution rate and 95.6% glucan digestibility by using a cellulase loading of 3 filter paper units (FPU)/g-pretreated solids, which obviously enhanced 30.7% of the glucan conversion rate. This method was applicable due to effective xylan dissolution, lignin removal, and EH with PEG 3000 addition, which can help saved 85% cellulase loading.

The critical role of lignin in lignocellulosic biomass conversion and recent pretreatment strategies: A comprehensive review

Heterogeneity and rigidity of lignocellulose causing resistance to its deconstruction have provided technical and economic challenges in the current biomass conversion processes. Lignin has been considered as a crucial recalcitrance component in biomass utilization. An in-depth understanding of lignin properties and their influences on biomass conversion can provide clues to improve biomass utilization. Also, utilization of lignin can significantly increase the economic viability of biorefinery. Recent lignin-targeting pretreatments have aimed not only to overcome recalcitrance for biomass conversion but also to selectively fractionate lignin for lignin valorization. Numerous studies have been conducted in biomass characteristics and conversion technologies, and the role of lignin is critical for lignin valorization and biomass pretreatment development. This review provides a comprehensive review of lignin-related biomass characteristics, the impact of lignin on the biological conversion of biomass, and recent lignin-targeting pretreatment strategies. The desired lignin properties in biorefinery and future pretreatment directions are also discussed.

Exploring why sodium lignosulfonate influenced enzymatic hydrolysis efficiency of cellulose from the perspective of substrate-enzyme adsorption

BACKGROUND

Cellulase adsorbed on cellulose is productive and helpful to produce reducing sugars in enzymatic hydrolysis of lignocellulose; however, cellulase adsorbed on lignin is non-productive. Increasing productive adsorption of cellulase on cellulose would be beneficial in improving enzymatic hydrolysis. Adding lignin that was more hydrophilic in hydrolysis system could increase productive adsorption and promote hydrolysis. However, the effect mechanism is still worth exploring further. In this study, lignosulfonate (LS), a type of hydrophilic lignin, was used to study its effect on cellulosic hydrolysis.

RESULTS

The effect of LS on the enzymatic hydrolysis of pure cellulose (Avicel) and lignocellulose [dilute acid (DA) treated sugarcane bagasse (SCB)] was investigated by analyzing enzymatic hydrolysis efficiency, productive and non-productive cellulase adsorptions, zeta potential and particle size distribution of substrates. The result showed that after adding LS, the productive cellulase adsorption on Avicel reduced. Adding LS to Avicel suspension could form the Avicel-LS complexes. The particles were charged more negatively and the average particle size was smaller than Avicel before adding LS. In addition, adding LS to cellulase solution formed the LS-cellulase complexes. For DA-SCB, adding LS decreased the non-productive cellulase adsorption on DA-SCB from 3.92 to 2.99 mg/g lignin and increased the productive adsorption of cellulase on DA-SCB from 2.00 to 3.44 mg/g cellulose. Besides, the addition of LS promoted the formation of LS-lignin complexes and LS-cellulase complexes, and the complexes had more negative charges and smaller average sizes than DA-SCB lignin and cellulase particles before adding LS.

CONCLUSIONS

In this study, LS inhibited Avicel's hydrolysis, but enhanced DA-SCB's hydrolysis. This stemmed from the fact that LS could bind cellulase and Avicel, and occupied the binding sites of cellulase and Avicel. Thus, a decreased productive adsorption of cellulase on Avicel arose. Regarding DA-SCB, adding LS, which enhanced hydrolysis efficiency of DA-SCB, increased the electrostatic repulsion between DA-SCB lignin and cellulase, and therefore, decreased non-productive adsorption of cellulase on DA-SCB lignin and enhanced productive adsorption of cellulase on DA-SCB cellulose.

Effect of the isoelectric point of pH-responsive lignin-based amphoteric surfactant on the enzymatic hydrolysis of lignocellulose

The isoelectric point (pI) of lignin-based surfactant is an important factor in the enhancement on the enzymatic hydrolysis of lignocellulose. In this work, lignin carboxylate (LC) and quaternary ammonium lignin carboxylates (LCQ-x, x%: the mass ratio of quaternizing agent to enzymatic hydrolysis lignin) with different isoelectric points were synthesized. LC or LCQ-x with pI significantly lower or higher than 4.8 reduced the non-productive adsorption of cellulase on lignin, but for the significant inhibitory effect on cellulase activity, their enhancements on the enzymatic hydrolysis of lignocellulose were not remarkable. However, LCQ-x with pI around 4.8 preserved the cellulase activity, and significantly reduced the non-productive adsorption of cellulase, therefore remarkably enhanced the enzymatic hydrolysis. 2 g/L LC, LCQ-40 (pI = 5.0) and LCQ-100 (pI = 9.2) increased the enzymatic digestibility of pretreated eucalyptus from 35.2% to 53.4%, 95.3% and 60.4% respectively. In addition, for the excellent pH-response performance, LCQ could be efficiently recovered after enzymatic saccharification.

Overcoming biomass recalcitrance by synergistic pretreatment of mechanical activation and metal salt for enhancing enzymatic conversion of lignocellulose

BACKGROUND

Due to biomass recalcitrance, including complexity of lignocellulosic matrix, crystallinity of cellulose, and inhibition of lignin, the bioconversion of lignocellulosic biomass is difficult and inefficient. The aim of this study is to investigate an effective and green pretreatment method for overcoming biomass recalcitrance of lignocellulose.

RESULTS

An effective mechanical activation (MA) + metal salt (MAMS) technology was applied to pretreat sugarcane bagasse (SCB), a typical kind of lignocellulosic biomass, in a stirring ball mill. Chlorides and nitrates of Al and Fe showed better synergistic effect with MA, especially AlCl₃, ascribing to the interaction between metal salt and oxygen-containing groups induced by MA. Comparative studies showed that MAMS pretreatment effectively changed the recalcitrant structural characteristics of lignocellulosic matrix and reduced the inhibitory action of lignin on enzymatic conversion of SCB. The increase in hydroxyl and carboxyl groups of lignin induced by MAMS pretreatment led to the increase of its hydrophilicity, which could weaken the binding force between cellulase and lignin and reduce the nonproductive binding of cellulase enzymes to lignin.

CONCLUSIONS

MAMS pretreatment significantly enhanced the enzymatic digestibility of polysaccharides substrate by overcoming biomass recalcitrance without the removal of lignin from enzymatic hydrolysis system.

Synergistic effects of pH and organosolv lignin addition on the enzymatic hydrolysis of organosolv-pretreated loblolly pine

The effect of ethanol organosolv lignin (EOL) on enzymatic hydrolysis was examined at pH 4.8-6.0. The addition of EOL prepared from sweetgum enhanced the enzymatic hydrolysis of organosolv-pretreated loblolly pine (OPLP) by 38.8% and 88.0% at pH 4.8 and 5.6, respectively. The addition of EOL prepared from loblolly pine inhibited the enzymatic hydrolysis of OPLP at pH 4.8 but improved it by 43.0% at pH 5.6. This suggests that the addition of EOL and increase in pH act synergistically to improve the enzymatic hydrolysis of OPLP. The effect of EOL addition on cellulase adsorption onto residual lignins was examined. The results revealed that increasing the pH intensified the suppression of non-productive binding between enzymes and residual lignins by EOL. The potential stabilization effects of EOL on enzymes can contribute to the improvement of enzymatic hydrolysis with EOL at higher pH.

Enhanced enzymatic saccharification of corn stover by in situ modification of lignin with poly (ethylene glycol) ether during low temperature alkali pretreatment

A novel pretreatment process of corn stover was established in this study by in situ modification of lignin with poly (ethylene glycol) diglycidyl ether (PEGDE) during low temperature alkali pretreatment. The addition of PEGDE obviously improved the enzymatic hydrolysis by covalently modifying the residual lignins in substrates. Under the optimized conditions (pretreated with 10% (w/w) NaOH and 10% (w/w) PEGDE at 70°C for 2.5h), the total fermentable sugar yield was increased by 46.4%, from 23.7g to 34.7g per 100g raw materials. Additionally, the remaining activities of exo-glucanase and β-glucosidase in supernatant were increased by 58.6% and 40.6% respectively, demonstrating that the enhancement of enzymatic hydrolysis was mainly due to the alleviation of enzyme non-productive binding. Although the isolated lignin modified with PEGDE enhanced the enzymatic hydrolysis of substrates as well, this in situ lignin modification provided an efficient but simple way to improve enzymatic saccharification.

Comparative secretomic analysis of lignocellulose degradation by Lentinula edodes grown on microcrystalline cellulose, lignosulfonate and glucose

Lentinula edodes has the potential to degrade woody and nonwoody lignocellulosic biomass. However, the mechanism of lignocellulose degradation by L. edodes is unclear. The aim of this work is to explore the profiling of soluble secreted proteins involved in lignocellulose degradation in L. edodes. For that, we compared the secretomes of L. edodes grown on microcrystalline cellulose, cellulose with lignosulfonate and glucose. Based on nanoliquid chromatography coupled with tandem mass spectrometry of whole-protein hydrolysate, 230 proteins were identified. Label-free proteomic analysis showed that the most abundant carbohydrate-active enzymes involved in polysaccharide hydrolysis were endo-β-1,4-glucanase, α-galactosidase, polygalacturonase and glucoamylase in both cellulosic secretomes. In contrast, enzymes involved in lignin degradation were most abundant in glucose culture, with laccase 1 being the predominant protein (13.13%). When the cellulose and cellulose with lignosulfonate secretomes were compared, the abundance of cellulases and hemicellulases was higher in cellulose with lignosulfonate cultures, which was confirmed by enzyme activity assays. In addition, qRT-PCR analysis demonstrated that the expression levels of genes encoding cellulases and hemicellulases were significantly increased (by 32.2- to 1166.7-fold) when L. edodes was grown in cellulose with lignosulfonate medium.

BIOLOGICAL SIGNIFICANCE

In this article, the secretomes of L. edodes grown on three different carbon sources were compared. The presented results revealed the profiling of extracellular enzymes involved in lignocellulose degradation, which is helpful to further explore the mechanism of biomass bioconversion by L. edodes.

Optimization of simultaneous saccharification and fermentation conditions with amphipathic lignin derivatives for concentrated bioethanol production

Amphipathic lignin derivatives (A-LDs) prepared from the black liquor of soda pulping of Japanese cedar are strong accelerators for bioethanol production under a fed-batch simultaneous enzymatic saccharification and fermentation (SSF) process. To improve the bioethanol production concentration, conditions such as reaction temperature, stirring program, and A-LDs loadings were optimized in both small scale and large scale fed-batch SSF. The fed-batch SSF in the presence of 3.0g/L A-LDs at 38°C gave the maximum ethanol production and a high enzyme recovery rate. Furthermore, a jar-fermenter equipped with a powerful mechanical stirrer was designed for 1.5L-scale fed-batch SSF to achieve rigorous mixing during high substrate loading. Finally, the 1.5L fed-batch SSF with a substrate loading of 30% (w/v) produced a high ethanol concentration of 87.9g/L in the presence of A-LDs under optimized conditions.

Using polyvinylpyrrolidone to enhance the enzymatic hydrolysis of lignocelluloses by reducing the cellulase non-productive adsorption on lignin

Polyvinylpyrrolidone (PVP) is an antifouling polymer to resist the adsorption of protein on solid surface. Effects of PVP on the enzymatic hydrolysis of pretreated lignocelluloses and its mechanism were studied. Adding 1g/L of PVP8000, the enzymatic digestibility of eucalyptus pretreated by dilute acid (Eu-DA) was increased from 28.9% to 73.4%, which is stronger than the classic additives, such as PEG, Tween and bovine serum albumin. Compared with PEG4600, the adsorption of PVP8000 on lignin was larger, and the adsorption layer was more stable and hydrophilic. Therefore, PVP8000 reduced 73.1% of the cellulase non-productive adsorption on lignin and enhanced the enzymatic hydrolysis of lignocelluloses greatly.

Effects of charge and surface defects of multi-walled carbon nanotubes on the disruption of model cell membranes

The direct contact between multi-walled carbon nanotubes (MWCNTs) and cell membranes causes membrane disruption, potentially leading to cytotoxicity. However, the role of electrostatic forces and MWCNT properties is still open to debate. In this study, the influences of charge and MWCNT surface defects on membrane disruption were investigated by microscopy and a quartz crystal microbalance with dissipation monitoring (QCM-D). Positively/negatively charged giant unilamellar vesicles (GUVs) and supported lipid bilayers (SLBs) were made as model cell membranes. Negatively charged MWCNTs disrupted the GUVs containing positively charged lipids, which confirmed the electrostatically mediated interaction. However, the mass loss was detected from the negatively charged SLBs after MWCNT exposure, which suggests the extraction of phospholipids. The defect degree of MWCNTs correlated with their adhesion amount on the membranes. Both the oxygenated functional groups and unoxidized dangling carbon bonds were active sites for MWCNT-membrane interactions. The MWCNTs were observed to be engulfed inside the GUVs. The results clearly demonstrate that phospholipid extraction by MWCNTs could occur in electrostatically repulsive conditions, and MWCNT defects were active binding sites whether or not they were oxygenated. Our findings should be helpful in the design and safe applications of carbon nanomaterials.

Fluorescent pH-Sensing Probe Based on Biorefinery Wood Lignosulfonate and Its Application in Human Cancer Cell Bioimaging

A water-soluble, ratiometric fluorescent pH probe, L-SRhB, was synthesized via grafting spirolactam Rhodamine B (SRhB) to lignosulfonate (LS). As the ring-opening product of L-SRhB, FL-SRhB was also prepared. The pH-response experiment indicated that L-SRhB showed a rapid response to pH changes from 4.60 to 6.20 with a pK_a of 5.35, which indicated that L-SRhB has the potential for pH detection of acidic organelle. In addition, the two probes were internalized successfully by living cells through the endocytosis pathway and could distinguish normal cells from cancer cells by different cell staining rates. In addition, L-SRhB showed obvious cytotoxicity to cancer cells, whereas it was nontoxic to normal cells in the same condition. L-SRhB might have potential in cancer therapy. L-SRhB might be a promising ratiometric fluorescent pH sensor and bioimaging dye for the recognition of cancer cells. The results also provided a new perspective to the high-value utilization of lignin.

Improving enzymatic hydrolysis of lignocellulosic substrates with pre-hydrolysates by adding cetyltrimethylammonium bromide to neutralize lignosulfonate

Two pretreatment methods to overcome recalcitrance of lignocelluloses, sulfite pretreatment (SPORL) and dilute acid (DA), were conducted to pretreat softwood masson pine and hardwood eucalyptus for enzymatic hydrolysis. In the presence of corresponding pre-hydrolysates, adding moderate cetyltrimethylammonium bromide (CTAB) could enhance the enzymatic hydrolysis of the SPORL-pretreated substrates, but had no enhancement for the DA-pretreated substrates. The results showed that sodium lignosulfonate (SL) in pre-hydrolysates and CTAB together had a strong enhancement on the enzymatic hydrolysis of lignocelluloses. The compound of commercial lignosulfonate SXSL and CTAB (SXSL-CTAB) could enhance the substrate enzymatic digestibility (SED) of SPORL-pretreated masson pine from 27.1% to 71.0%, and that of DA-pretreated eucalyptus from 37.6% to 67.9%. The mechanism that CTAB increased the adsorption of SL on lignin to form more effective steric hindrance and reduced the non-productive adsorption of cellulase on lignin by neutralizing the negative charge of SL was proposed.

Epoxidation and etherification of alkaline lignin to prepare water-soluble derivatives and its performance in improvement of enzymatic hydrolysis efficiency

BACKGROUND

Due to the depletion of fossil resources and their environmental impact, woody biomass has received much attention as an alternative resource. Lignin, as the third most abundant biopolymer from biomass, is now considered as an excellent alternative feedstock for chemicals and materials. The conversion of lignin to the value-added products is a key process to achieve an integrated biorefinery of woody biomass. Among these value-added products, lignin-based derivatives with good surface activity can be applied to enhance the conversion of cellulose into fermentable sugars, which not only decrease the cost of bioethanol production, but also reduce the environmental pollution and green house effect resulting from the burning of fossil resources.

RESULTS

Water-soluble alkaline lignin was synthesized by the reaction between polyethylene glycols (PEG600 and PEG1000) and epoxy lignin. FT-IR and NMR analyses indicated that PEGs were successively introduced into epoxy alkaline lignin using potassium persulfate as a catalyst. Emulsification and surface activity tests indicated that the surface tension of the prepared lignin derivative solution was 43.30 mN/m at the critical micelle concentration (1.03 %). A stable emulsions layer was formed with hexanes and the emulsion particle diameter in the emulsion phase for all products was observed at 10-50 μm. The results of enzymatic hydrolysis indicated that the products derived from PEG1000-grafted lignin resulted in the highest increasing rate of 18.6 % of glucose yield during the enzymatic hydrolysis of hardwood bleached pulp. The results of fermentation experiments suggested that the product had no toxicity for fermentation micro-organisms.

CONCLUSION

Water-soluble alkaline lignin derivatives were prepared through epoxidation and etherification, which are promising feedstocks for detergents, emulsifier, and additive to enhance enzymatic hydrolysis efficiency and ethanol fermentation.

Enhancing enzymatic hydrolysis of xylan by adding sodium lignosulfonate and long-chain fatty alcohols

Sodium lignosulfonate (SXSL) and long-chain fatty alcohols (LFAs) could enhance the enzymatic hydrolysis of xylan, and the compound of SXSL and LFAs have synergies on the enzymatic hydrolysis. SXSL shows a strong enhancement in buffer pH range from 4.0 to 6.0. The enhancement increased with the SXSL dosage and the xylanase loading. The cellulose and lignin in corncob substrate could not only adsorb xylanase nonproductively, but also seriously reduce the accessibility of xylanase on xylan to impede the enzymatic hydrolysis of xylan. Cellulase could break the plant cell wall structure of corncob and make additives work better. The xylose yield of corncob at 72h increased from 59.4% to 73.7% by adding the compound of 5g/L SXSL and 0.01% (v/v) n-decanol, which was higher than that without cellulase and additives by 30.7%. Meanwhile, the glucose yield at 72h of corncob increased from 45.8% to 62.3%.

Effect of the molecular structure of lignin-based polyoxyethylene ether on enzymatic hydrolysis efficiency and kinetics of lignocelluloses

Effect of the molecular structure of lignin-based polyoxyethylene ether (EHL-PEG) on enzymatic hydrolysis of Avicel and corn stover was investigated. With the increase of PEG contents and molecular weight of EHL-PEG, glucose yield of corn stover increased. EHL-PEG enhanced enzymatic hydrolysis of corn stover significantly at buffer pH 4.8-5.5. Glucose yield of corn stover at 20% solid content increased from 32.8% to 63.8% by adding EHL-PEG, while that with PEG4600 was 54.2%. Effect of EHL-PEG on enzymatic hydrolysis kinetics of cellulose film was studied by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). An enhancing mechanism of EHL-PEG on enzymatic hydrolysis kinetics of cellulose was proposed. Cellulase aggregates dispersed by EHL-PEG excavated extensive cavities into the surface of cellulose film, making the film become more loose and exposed. After the maximum enzymatic hydrolysis rate, the film was mainly peeled off layer by layer until equilibrium.