Detoxification of biomass hydrolysates with nucleophilic amino acids enhances alcoholic fermentation

A new l-cysteine-assisted glycerol organosolv pretreatment for improved enzymatic hydrolysis of corn stover

Deconstruction of lignocellulose via efficient pretreatment is crucial for producing fermentable sugars. In this study, effects of glycerol organosolv pretreatment (GOP) on main chemical composition of corn stover were investigated. Results indicate that the residual corn stover after 80 wt% glycerol pretreatment (at 220 °C for 0.5 h) yielded 75.97 % glucose and 78.21 % xylose after enzymatic hydrolysis, which were enhanced by 3.39- and 6.08-fold compared to the untreated corn stover. Subsequently, an l-cysteine-assisted GOP was proposed with higher yields of glucose (86.20 %) and xylose (91.13 %). When pretreating corn stover with 80 wt% glycerol containing 0.07 wt% l-cysteine at 220 °C for 0.5 h, higher fermentable sugars of 26.08 g were produced from 100 g feedstock after enzymolysis. Intrinsic mechanisms of the proposed pretreatment for enhancing enzymatic digestibility were elucidated by physiochemical characterization technologies and techno-economic analysis was also studied. This study provides guidance for fermentable sugars production from renewable lignocellulose.

Insight on a Competitive Nucleophilic Addition Reaction of Nε-(Carboxymethyl) Lysine or Different Amino Acids with 4-Methylbenzoquinone

ο-benzoquinone is a common intermediate which is mostly formed by the oxidation of phenolics or polyphenols containing catechol structure. ο-benzoquinone has an outstanding nucleophilic ability, while advanced glycation end products (AGEs) are nucleophilic and can undergo a nucleophilic addition reaction with ο-benzoquinone to mitigate the harmful effects of AGEs on the body. As common nucleophilic substances, amino acids existing in large quantities in food processing and in vivo may bind competitively with ο-benzoquinone, thus influencing the trapping of ο-benzoquinone with AGEs. In this study, cyclic voltammetry and coexistence experiments were used to compare the reactivities of Nε-(carboxymethyl) lysine (CML) and amino acids with 4-methylbenzoquinone (4-MBQ). The results showed that CML is more reactive with ο-benzoquinone than most amino acids, and even in complex systems, ο-benzoquinone still captured CML. Moreover, almost all adducts were identified by UPLC-QTOF-MS/MS, and their chemical formulas were deduced. Quantum chemistry accurately predicts the efficiency and site of reactions of ο-benzoquinone and nucleophiles to a certain extent, and found that a secondary amine has a greater reactivity with 4-MBQ than a primary amine in a similar molecular structure. In general, ο-benzoquinone could capture AGEs, thereby showing potential to reduce the harmfulness of AGEs.

The Effect of Detoxification of Lignocellulosic Biomass for Enhanced Methane Production

The aim of this research is to examine the effect of lignocellulosic biomass detoxification on the efficiency of the methane fermentation process. Both for corn straw and rye straw, the methane yield was expressed per volume of fermentation medium and per mass of volatile solids (VS) added. Lignocellulosic biomass was subjected of thermo-chemical and enzymatic sequential pretreatments. It was found that methane yield was higher by 22% when using the detoxification process. In these variants, CH4 yield was 18.86 L/L for corn straw and 17.69 L/L for rye straw; while methane yield expressed per mass of VS added was 0.31 m3/kg VS for corn straw and 0.29 m3/kg VS for rye straw. The inclusion of a detoxification step in pretreatments of biomass lignocellulosic increases the degree of organic substance decomposition and enhances methane yield. The results show that a two-step pretreatment, alkaline/enzymatic with a detoxification process, is necessary for the effective generation of high methane concentration biogas.

One-pot process for lactic acid production from wheat straw by an adapted Bacillus coagulans and identification of genes related to hydrolysate-tolerance

In this study, Bacillus coagulans CC17A with highly tolerant to hydrolysate was obtained through adaptive evolution. After 63 generations, the strain CC17A was stably in 45% (v/v) hydrolysate media and could digest multiple inhibitors in the hydrolysate. Based on its promising features, a one-pot process was developed to produce lactic acid (LA) from wheat straw. After dilute acid pretreatment of wheat straw, simultaneous saccharification and co-fermentation was conducted using CC17A without any solid-liquid separation and pre-detoxification. Total 35.50 g LA was produced from 80 g raw substrate and the production yield was as high as 70.9% of theoretical. To elucidate the tolerance mechanism, transcriptomic profiling of CC17A was studied. The highly up-regulated oxidoreductases and phenolic acid decarboxylase are considered to be involved with the inhibitors-tolerance of B. coagulans CC17A.

Origin, Impact and Control of Lignocellulosic Inhibitors in Bioethanol Production—A Review

Bioethanol production from lignocellulosic biomass is still struggling with many obstacles. One of them is lignocellulosic inhibitors. The aim of this review is to discuss the most known inhibitors. Additionally, the review addresses different detoxification methods to degrade or to remove inhibitors from lignocellulosic hydrolysates. Inhibitors are formed during the pretreatment of biomass. They derive from the structural polymers-cellulose, hemicellulose and lignin. The formation of inhibitors depends on the pretreatment conditions. Inhibitors can have a negative influence on both the enzymatic hydrolysis and fermentation of lignocellulosic hydrolysates. The inhibition mechanisms can be, for example, deactivation of enzymes or impairment of vital cell structures. The toxicity of each inhibitor depends on its chemical and physical properties. To decrease the negative effects of inhibitors, different detoxification methods have been researched. Those methods focus on the chemical modification of inhibitors into less toxic forms or on the separation of inhibitors from lignocellulosic hydrolysates. Each detoxification method has its limitations on the removal of certain inhibitors. To choose a suitable detoxification method, a deep molecular understanding of the inhibition mechanism and the inhibitor formation is necessary.

Effect of overliming and activated carbon detoxification on inhibitors removal and butanol fermentation of poplar prehydrolysates

BACKGROUND

Biomass prehydrolysates from dilute acid pretreatment contain a considerable amount of fermentable sugars for biofuels production. However, carbonyl degradation compounds present severe toxicity to fermentation microbes. Furans (such as furfural and hydroxymethylfurfural), aliphatic acids (such as acetic acid, formic acid and levulinic acid) and phenolic compounds (such as vanillin and syringaldehyde) have been suggested to be the main inhibitors in biomass prehydrolysates. However, no single compound has been determined as the dominant toxic inhibitor. The effects of various detoxification methods on inhibitors removal have not been fully understood.

RESULTS

The effects of overliming and activated carbon (AC) detoxification on the removal of inhibitors and butanol fermentation of the poplar prehydrolysates were investigated. Gas chromatography-mass spectrometry (GC/MS) was used to identify and quantify 46 carbonyl compounds as potential inhibitors. It was observed that overliming and AC treatment alone did not make the prehydrolysates fermentable with Clostridium saccharobutylicum. The sequential overliming and AC resulted in a remarkable fermentability and a high butanol yield at 0.22 g g-1 sugar. The inhibitor removal in the prehydrolysates treated by overliming and AC was also examined by GC/MS. Overliming removed 75.6% of furan derivatives and 68.1% of aromatic monomers. In comparison, AC (5.0% w/v) removed 77.9% of furan derivatives and 98.6% of aromatic monomers. In addition, overliming removed much more 2,5-furandicarboxyaldehyde, 5-ethylfuran-2-carbaldehyde and 2,5-hexanedione than AC did. On the contrary, AC could remove considerably more phenolic acids than overliming. In the sequential detoxification, both dialdehydes/diketones and phenolic acids were extensively removed. This could be the main reason why the sequential detoxification enabled a remarkable ABE fermentation for the prehydrolysates.

CONCLUSIONS

This study indicated that the effect of overliming and AC treatment on inhibitors removal was related to their chemical structures. Overliming removed more dialdehydes and diketones than AC treatment, while AC removed more phenolic acids than overliming. Sequential overliming and AC treatment were required to make the prehydrolysates fermentable with C. saccharobutylicum. The study also suggested different detoxification method was needed for ABE fermentation of the prehydrolysate as compared to ethanol fermentation.

Strategies for enhancing microbial tolerance to inhibitors for biofuel production: A review

Using lignocellulosic biomass for the production of renewable biofuel provides a sustainable and promising solution to the crisis of energy and environment. However, the processes of biomass pretreatment and biofuel fermentation bring a variety of inhibitors to microbial strains. These inhibitors repress microbial growth, decrease biofuel yields and increase fermentation costs. The production of biofuels from renewable lignocellulosic biomass relies on the development of tolerant and robust microbial strains. In recent years, the advancement of tolerance engineering and evolutionary engineering provides powerful platform for obtaining host strains with desired tolerance for further metabolic engineering of biofuel pathways. In this review, we summarized the inhibitors derived from biomass pretreatment and biofuel fermentation, the mechanisms of inhibitor toxicity, and the strategies for enhancing microbial tolerance.

Detoxification of Organosolv-Pretreated Pine Prehydrolysates with Anion Resin and Cysteine for Butanol Fermentation

Bioconversion of lignocellulose to biofuels suffers from the degradation compounds formed during pretreatment and acid hydrolysis. In order to achieve an efficient biomass to biofuel conversion, detoxification is often required before enzymatic hydrolysis and microbial fermentation. Prehydrolysates from ethanol organosolv-pretreated pine wood were used as substrates in butanol fermentation in this study. Six detoxification approaches were studied and compared, including overliming, anion exchange resin, nonionic resin, laccase, activated carbon, and cysteine. It was observed that detoxification by anion exchange resin was the most effective method. The final butanol yield after anion exchange resin treatment was comparable to the control group, but the fermentation was delayed for 72 h. The addition of Ca(OH)₂ was found to alleviate this delay and improve the fermentation efficiency. The combination of Ca(OH)₂ and anion exchange resin resulted in completion of fermentation within 72 h and acetone-butanol-ethanol (ABE) production of 11.11 g/L, corresponding to a yield of 0.21 g/g sugar. The cysteine detoxification also resulted in good detoxification performance, but promoted fermentation towards acid production (8.90 g/L). The effect of salt on ABE fermentation was assessed and the possible role of Ca(OH)₂ was to remove the salts in the prehydrolysates by precipitation.

Biochemical production of bioenergy from agricultural crops and residue in Iran

The present study assessed the potential for biochemical conversion of energy stored in agricultural waste and residue in Iran. The current status of agricultural residue as a source of bioenergy globally and in Iran was investigated. The total number of publications in this field from 2000 to 2014 was about 4294. Iran ranked 21st with approximately 54 published studies. A total of 87 projects have been devised globally to produce second-generation biofuel through biochemical pathways. There are currently no second-generation biorefineries in Iran and agricultural residue has no significant application. The present study determined the amount and types of sustainable agricultural residue and oil-rich crops and their provincial distribution. Wheat, barley, rice, corn, potatoes, alfalfa, sugarcane, sugar beets, apples, grapes, dates, cotton, soybeans, rapeseed, sesame seeds, olives, sunflowers, safflowers, almonds, walnuts and hazelnuts have the greatest potential as agronomic and horticultural crops to produce bioenergy in Iran. A total of 11.33million tonnes (Mt) of agricultural biomass could be collected for production of bioethanol (3.84gigaliters (Gl)), biobutanol (1.07Gl), biogas (3.15billion cubic meters (BCM)), and biohydrogen (0.90BCM). Additionally, about 0.35Gl of biodiesel could be obtained using only 35% of total Iranian oilseed. The potential production capacity of conventional biofuel blends in Iran, environmental and socio-economic impacts including well-to-wheel greenhouse gas (GHG) emissions, and the social cost of carbon dioxide reduction are discussed. The cost of emissions could decrease up to 55.83% by utilizing E85 instead of gasoline. The possible application of gaseous biofuel in Iran to produce valuable chemicals and provide required energy for crop cultivation is also studied. The energy recovered from biogas produced by wheat residue could provide energy input for 115.62 and 393.12 thousand hectares of irrigated and rain-fed wheat cultivation in Iran, respectively. The nitrogen requirement for 33.6% of the total wheat cultivation area could be supplied by the ammonia acquired from biohydrogen. A discussion of the logistics of collection and transportation of the biomass and sensitivity analysis are carried out to evaluate the effect of field cover factor, crop yield, and well-to-wheel GHG emission on collectable residue, biofuel production, and GHG emissions.

Physico-chemical characterization of pine cone shell and its use as biosorbent and fuel

Physico-chemical properties of pine cone shell have been determined. Results of characterization study showed that pine cone shell could be used as biosorbent of nickel from aqueous solutions in a fixed-bed column and later as input material in thermochemical processes. To study the behavior of Ni-loaded pine cone shell as fuel, non-isothermal thermogravimetric tests were performed. These tests showed that, in nitrogen atmosphere, the main decomposition occurs from 200°C to 500°C and, in oxidant atmosphere, the behavior is of type "combustion+pyrolysis" (at higher temperatures there is a clear decomposition of residue formed during the initial steps). Finally, the effect of the presence of Ni was analyzed. Thermogravimetric curves did not change their profile and the total amount of nickel was detected in char-ash fraction and not in flue gases. These results suggest that nickel does not form volatile compounds at considered operational conditions.