The effect of metal ions as co-catalysts on acidic ionic liquid catalyzed single-step saccharification of corn stover in water

Evolution of catalytically active species in paired PdCl2-CuCl2/[BMim]Cl for hydrolysis of β-1,4-glycosidic bonds

In this work, we identified the prevailing catalytically active species evolved from paired PdCl2-CuCl2 in 1-butyl-3-methylimidazolium chloride ([BMim]Cl) that displayed dramatic synergism between the two metal chlorides in catalyzing the...

The Effect of Dicarboxylic Acid Catalyst Structure on Hydrolysis of Cellulose Model Compound D-Cellobiose in Water

Background:

Polycarboxylic acids are of interest as simple mimics for cellulase enzyme catalyzed depolymerization of cellulose. In this study, DFT calculations were used to investigate the effect of structure on dicarboxylic acid organo-catalyzed hydrolysis of cellulose model compound D-cellobiose to D-glucose.

Methods:

Binding energy of the complex formed between D-cellobiose and acid (Ebind), as well as glycosidic oxygen to dicarboxylic acid closest acidic H distance were studied as key parameters affecting the turn over frequency of hydrolysis in water.

Result:

α-D-cellobiose - dicarboxylic acid catalyst down face approach showed high Ebind values for five of the six acids studied; indicating the favorability of down face approach. Maleic, cis-1,2-cyclohexane dicarboxylic, and phthalic acids with the highest catalytic activities showed glycosidic oxygen to dicarboxylic acid acidic H distances 3.5-3.6 Å in the preferred configuration.

Conclusion:

The high catalytic activities of these acids may be due to the rigid structure, where acid groups are held in a fixed geometry.

Rice husk hydrochars from metal chloride-assisted hydrothermal carbonization as biosorbents of organics from aqueous solution

Hydrochar a carbon-rich material resulting from hydrothermal carbonization of biomass, has received substantial attention because of its potential application in various areas such as carbon sequestration, bioenergy production and environmental amelioration. A series of hydrochars were prepared by metal chloride-assisted hydrothermal carbonization of rice husk and characterized by elemental analysis, zeta potential, X-ray diffraction, Brunauer-Emmett-Teller measurements, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and scanning electron microscopy. The results reveal that the prepared hydrochars have carbon contents ranging from 45.01 to 58.71%, BET specific areas between 13.23 and 45.97 m2/g, and rich O-containing functional groups on the surfaces. The metal chlorides added in the feedwater could improve the degree of carbonization and show significant effects on the physical, chemical and adsorption properties of the hydrochars. The adsorption of the selected organics on the hydrochars is a spontaneous and physisorption-dominated process. The hydrochars possess larger adsorption capacities for 2-naphthol than for berberine hydrochloride and Congo red, and the modeling maximum adsorption capacities of 2-naphthol are in the range of 170.1-2680 mg/g. The adsorption equilibrium could be accomplished in 10, 40 and 30 min for 2-naphthol, berberine hydrochloride and Congo red, respectively. These results suggest metal chloride-assisted hydrothermal carbonization a promising method for converting biomass waste into effective adsorbents for wastewater treatment.

Hydrolysis and interactions of d-cellobiose with polycarboxylic acids

The hydrolysis of cellulose model compound d-cellobiose was studied with a series of eight common polycarboxylic acids and two monocarboxylic acids in aqueous medium using 0.500 mmol -COOH/L at 170 °C. The maleic acid showed the highest catalytic activity with turnover frequency (TOF) of 29.5 h^-1. The interaction of carboxylic acids with d-cellobiose in DMSO‑d₆ was studied by determination of the pseudo first-order rate constant k_H of anomeric -OH exchange rate in cellobiose using ¹H NMR spectroscopy. The maleic, oxalic and citric acids showed infinitely large k_H values indicating very strong interactions with d-cellobiose. The next highest interactions were found with phthalic acid (k_H = 248.8 Hz). The FT-IR studies showed significant carboxylic acid C=O stretching frequency shifts (Δν_C=O) of 12, 13 and 10 cm^-1 for maleic, oxalic and acetic acids respectively in mixtures with d-cellobiose.

Chlorocuprate(i) ionic liquid as an efficient and stable Cu-based catalyst for hydrochlorination of acetylene

Chlorocuprate(i) ionic liquids can be well-stabilized, low-cost, efficient and green non-mercury catalysts for hydrochlorination of acetylene.

Recent progress in homogeneous Lewis acid catalysts for the transformation of hemicellulose and cellulose into valuable chemicals, fuels, and nanocellulose

The evolution from petroleum-based products to the bio-based era by using renewable resources is one of the main research challenges in the coming years. Lignocellulosic biomass, consisting of inedible plant material, has emerged as a potential alternative for the production of biofuels, biochemicals, and nanocellulose-based advanced materials. The lignocellulosic biomass, which consists mainly of carbohydrate-based polysaccharides (hemicellulose and cellulose), is a green intermediate for the synthesis of bio-based products. In recent years, the re-engineering of biomass into a variety of commodity chemicals and liquid fuels by using Lewis acid catalysts has attracted much attention. Much research has been focused on developing new chemical strategies for the valorization of different biomass components. Homogeneous Lewis acid catalysts seem to be one of the most promising catalysts due to their astonishing features such as being less corrosive to equipment and being friendlier to the environment, as well as having the ability to disrupt the bonding system effectively and having high selectivity. Thus, these catalysts have emerged as important tools for the highly selective transformation of biomass components into valuable chemicals and fuels. This review provides an insightful overview of the most important recent developments in homogeneous Lewis acid catalysis toward the production and upgrading of biomass. The chemical valorization of the main components of lignocellulosic biomass (hemicellulose and cellulose), the reaction conditions, and process mechanisms are reviewed.

The enhancement of the hydrolysis of bamboo biomass in ionic liquid with chitosan-based solid acid catalysts immobilized with metal ions

Three kinds of sulfonated cross-linked chitosan (SCCR) immobilized with metal ions of Cu(2+), Fe(3+) and Zn(2+) individually were synthesized and firstly used as solid acid catalysts in the hydrolysis of bamboo biomass. FTIR spectra showed that metal ions had been introduced into SCCR and the N-metal ions coordinate bound was formed. The particle sizes of these catalysts were about 500-1000μm with a pore size of 50-160μm. All of the three kinds of catalysts performed well for bamboo hydrolysis with 1-butyl-3-methyl-imidazolium chloride used as solvent. The most effective one was sulfonated cross-linked chitosan immobilized with Fe(3+) (Fe(3+)-SCCR). TRS yields were up to 73.42% for hydrolysis of bamboo powder in [C4mim]Cl with Fe(3+)-SCCR at 120°C and 20RPM after 24h. These novel chitosan-based metal ions immobilized solid acid catalysts with ionic liquids as the solvent might be promising to facilitate cost-efficient conversion of biomass into biofuels and bioproducts.

Interactions of D-cellobiose with selected chloride salts: A ¹³C NMR and FT-IR study

The interactions of cellulose model compound d-cellobiose with chloride salts of Zn(2+), Ca(2+), Li(+), Sn(2+), La(3+), Mg(2+), K(+) and NH4(+) were evaluated by measuring the (13)C NMR chemical shift changes (Δδ) of the disaccharide due to the addition of salts in D2O. The KCl and NH4Cl showed similar Δδ changes due to interactions only with the Cl(-) anion. Whereas other chloride salts showed interactions with both cation and anion. Among these salts the total interactions are in the order: Zn(2+)>Sn(2+)>Li(+)>Ca(2+)~La(3+)>Mg(2+). The FT-IR spectra of D-cellobiose-chloride salt 1:2 mixtures also indicate that KCl and NH4Cl interacts similarly with D-cellobiose in the solid state.

Chemocatalytic hydrolysis of cellulose at 37 °C, 1 atm

The metal salt – Brønsted acidic ionic liquid system composed of ZnCl₂·1.74H₂O-1-(1-propylsulfonic)-3-methylimidazolium chloride can directly hydrolyze untreated cellulose in 78% total reducing sugar and 19% glucose yield at 37 °C, 1 atm in 4.0 days.