The dual effects of lignin content on enzymatic hydrolysis using film composed of cellulose and lignin as a structure model

Understanding the effects of different residual lignin fractions in acid-pretreated bamboo residues on its enzymatic digestibility

BACKGROUND

During the dilute acid pretreatment process, the resulting pseudo-lignin and lignin droplets deposited on the surface of lignocellulose and inhibit the enzymatic digestibility of cellulose in lignocellulose. However, how these lignins interact with cellulase enzymes and then affect enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid-pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by the milled wood lignin (MWL) method. All of the lignin fractions obtained from DAP-BR were used to investigate the mechanism for interaction between lignin and cellulase using surface plasmon resonance (SPR) technology to understand how they affect enzymatic hydrolysis RESULTS: The results showed that removing surface lignin significantly decreased the yield for enzymatic hydrolysis DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel inhibited its enzymatic hydrolysis, while different SL samples showed slight increases in enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus SL samples, a stronger affinity for MWL (KD = 6.8-24.7 nM) was found versus that of SL (KD = 39.4-52.6 nM) by SPR analysis. The affinity constants of all tested lignins exhibited good correlations (r > 0.6) with the effects on enzymatic digestibility of extracted DAP-BR and Avicel.

CONCLUSIONS

This work revealed that the surface lignin on DAP-BR is necessary for maintaining enzyme digestibility levels, and its removal has a negative impact on substrate digestibility.

Research and application progress of lignin-based composite membrane

In view of the serious environmental pollution, which is the greatest problem the world is facing, and the continuous consumption of raw materials, it is imminent to search for green and sustainable resources. Lignin is an organic polymer that exists widely in nature, and if it can be transformed from traditional low-value waste product with low range of applications to functional materials with high application prospects, it can be of great significance to alleviate environmental pollution and shortage of fossil resources. One of the functional applications of lignin involves its use to fabricate composite with other polymeric materials, which can then be used to prepare membrane materials. This review summarizes the recent research and application progress of combining lignin with polypropylene, polyvinyl alcohol, starch, cellulose, chitosan, and other polymeric materials to prepare composite membranes; and summarizes the future development direction of lignin-based composite membranes. We hope this review may provide a new perspective to the understanding of lignin-based composite membranes and a useful reference for future research.

Design strategies, properties and applications of cellulose nanomaterials-enhanced products with residual, technical or nanoscale lignin-A review

With the increasing demand for greener alternatives to fossil-derived products, research on cellulose nanomaterials (CNMs) has rapidly expanded. The combination of nanoscale properties and sustainable attributes makes CNMs an asset in the quest for a sustainable society. However, challenges such as the hydrophilic nature of CNMs, their low compatibility with non-polar matrices and modest thermal stability, slow the development of end-uses. Combination of CNMs with amphiphilic lignin can improve the thermal stability, enhance the compatibility with non-polar matrices and, additionally, endow CNMs with new functionalities e.g., UV shielding or antioxidative properties. This article comprehensively reviews the different design strategies and their influence on properties and applications of CNMs containing lignin in various forms; either as residual lignin, added technical lignin, or nanoscale particles. The review focuses especially on the synergy created between CNMs and lignin, paving the way for new production routes and use of CNM/lignin materials in high-performance applications.

The Secretome of Phanerochaete chrysosporium and Trametes versicolor Grown in Microcrystalline Cellulose and Use of the Enzymes for Hydrolysis of Lignocellulosic Materials

The ability of white-rot fungi to degrade polysaccharides in lignified plant cell walls makes them a suitable reservoir for CAZyme prospects. However, to date, CAZymes from these species are barely studied, which limits their use in the set of choices for biomass conversion in modern biorefineries. The current work joined secretome studies of two representative white-rot fungi, Phanerochaete chrysosporium and Trametes versicolor, with expression analysis of cellobiohydrolase (CBH) genes, and use of the secretomes to evaluate enzymatic conversion of simple and complex sugarcane-derived substrates. Avicel was used to induce secretion of high levels of CBHs in the extracellular medium. A total of 56 and 58 proteins were identified in cultures of P. chrysosporium and T. versicolor, respectively, with 78-86% of these proteins corresponding to plant cell wall degrading enzymes (cellulolytic, hemicellulolytic, pectinolytic, esterase, and auxiliary activity). CBHI predominated among the plant cell wall degrading enzymes, corresponding to 47 and 34% of the detected proteins in P. chrysosporium and T. versicolor, respectively, which confirms that Avicel is an efficient CBH inducer in white-rot fungi. The induction by Avicel of genes encoding CBHs (cel) was supported by high expression levels of cel7D and cel7C in P. chrysosporium and T. versicolor, respectively. Both white-rot fungi secretomes enabled hydrolysis experiments at 10 FPU/g substrate, despite the varied proportions of CBHs and other enzymes present in each case. When low recalcitrance sugarcane pith was used as a substrate, P. chrysosporium and T. versicolor secretomes performed similarly to Cellic® CTec2. However, the white-rot fungi secretomes were less efficient than Cellic® CTec2 during hydrolysis of more recalcitrant substrates, such as acid or alkaline sulfite-pretreated sugarcane bagasse, likely because Cellic® CTec2 contains an excess of CBHs compared with the white-rot fungi secretomes. General comparison of the white-rot fungi secretomes highlighted T. versicolor enzymes for providing high glucan conversions, even at lower proportion of CBHs, probably because the other enzymes present in this secretome and CBHs lacking carbohydrate-binding modules compensate for problems associated with unproductive binding to lignin.

Study on the chemical modification of alkali lignin towards for cellulase adsorbent application

The research of cost-efficient lignin-based adsorbents is a practical strategy for the recovery of cellulase. In this study, alkali lignin was modified to increase the phenolic hydroxyl (Ph-OH) content for cellulase adsorption applications. After phenolation, compared with the lignin reference, the maximum adsorption cellulase capacity of lignoresorcinol (LigR) and lignopyrogallol (LigP) was improved from 76.5 mg/g to 842.1 mg/g and 911.4 mg/g, respectively. The enzyme activity of the adsorbed cellulase on LigR was higher than that on LigP, which could migrate to the fresh substrates during enzymatic hydrolysis. The adsorbed cellulase could be easily recovered from two lignin-based adsorbents by adjusting pH. The distinct cellulase adsorption behavior of two lignin-based adsorbents was closely related to the high Ph-OH contents and low S/G ratio in phenolated lignin samples characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Heteronuclear Single Quantum Coherence-Nuclear Magnetic Resonance (HSQC-NMR).

Modification of Kraft Lignin with Dodecyl Glycidyl Ether

Kraft lignin (KL) is extensively produced in industry but is mainly burned as fuel. To broaden its use, KL was grafted with dodecyl glycidyl ether to alter its thermal properties. The reaction of KL with dodecyl glycidyl ether (DGE) was analyzed using nuclear magnetic resonance (NMR), Fourier infrared spectroscopy (FT-IR) and elemental analysis. Alternatively, KL was methylated to mask its phenolic hydroxy groups to investigate how phenolic hydroxy groups impact the grafting of the alkyl chain of DGE onto lignin (methylated Kraft lignin, MKL). The methylation facilitated the molecular weight enhancement and thermal stability reduction of Kraft lignin via grafting with DGE. The influence of grafting alkyl chains on the structural and thermal properties of KL and MKL was studied using thermogravimetric analysis and differential scanning calorimetry analysis. Our data suggest that, due to their high molecular weights and lower glass transition temperatures, the produced lignin derivatives may be promising feedstocks for composite production.

Aqueous Ammonia Pre-treatment of Wheat Straw: Process Optimization and Broad Spectrum Dye Adsorption on Nitrogen-Containing Lignin

Biorefineries need cost-efficient pretreatment processes that overcome the recalcitrance of plant biomass, while providing feasible valorization routes for lignin. Here we assessed aqueous ammonia for the separation of lignin from hydrothermally pretreated wheat straw prior to enzymatic saccharification. A combined severity parameter was used to determine the effects of ammonia concentration, treatment time and temperature on compositional and physicochemical changes [utilizing elemental analysis, cationic dye adsorption, FTIR spectroscopy, size-exclusion chromatography (SEC), and 31P nuclear magnetic resonance (NMR) spectroscopy] as well as enzymatic hydrolysability of straw. Pretreatment at the highest severity (20% NH3, 160°C) led to the maximum hydrolysability of 71% in a 24 h reaction time at an enzyme dosage of 15 FPU/g of pretreated straw. In contrast, hydrolysabilities remained low regardless of the severity when a low cellulase dosage was used, indicating competitive adsorption of cellulases on nitrogen-containing lignin. In turn, our results showed efficient adsorption of cationic, anionic and uncharged organic dyes on nitrogen-containing lignin, which opens new opportunities in practical water remediation applications.

Substrate-Related Factors Affecting Cellulosome-Induced Hydrolysis for Lignocellulose Valorization

Cellulosomes are an extracellular supramolecular multienzyme complex that can efficiently degrade cellulose and hemicelluloses in plant cell walls. The structural and unique subunit arrangement of cellulosomes can promote its adhesion to the insoluble substrates, thus providing individual microbial cells with a direct competence in the utilization of cellulosic biomass. Significant progress has been achieved in revealing the structures and functions of cellulosomes, but a knowledge gap still exists in understanding the interaction between cellulosome and lignocellulosic substrate for those derived from biorefinery pretreatment of agricultural crops. The cellulosomic saccharification of lignocellulose is affected by various substrate-related physical and chemical factors, including native (untreated) wood lignin content, the extent of lignin and xylan removal by pretreatment, lignin structure, substrate size, and of course substrate pore surface area or substrate accessibility to cellulose. Herein, we summarize the cellulosome structure, substrate-related factors, and regulatory mechanisms in the host cells. We discuss the latest advances in specific strategies of cellulosome-induced hydrolysis, which can function in the reaction kinetics and the overall progress of biorefineries based on lignocellulosic feedstocks.

Pretreatment with concurrent UV photocatalysis and alkaline H2O2 enhanced the enzymatic hydrolysis of sisal waste

This work studied a concurrent UV photocatalysis and alkaline H₂O₂ pretreatment (UHP) to enhance the subsequent enzymatic hydrolysis of sisal waste in comparison with alkaline H₂O₂ pretreatment (AHP). An optimal condition was identified for UHP at H₂O₂ charge 0.1 g/g dried sisal waste, pH 10.0, and UV radiation for 6 h. Under this condition, UHP led to a delignification rate of 76.6%, a conversion to reducing sugar at 71.2%, and a conversion to glucose at 91.6%, respectively. XRD, FT-IR and SEM analysis showed an increase in crystalline degree and significant changes in the structure of sisal during UHP. The current study implicates that UHP is more efficient than AHP in pretreating sisal waste, with reduced H₂O₂ charge, shortened pretreatment time, and enhanced enzymatic digestibility.

Duckweed (Lemna minor) is a novel natural inducer of cellulase production in Trichoderma reesei

An inducer is crucial for cellulase production. In this study, duckweed was used as an inducer of cellulase production by Trichoderma reesei RUT C30. In a reaction induced by 50 g/L duckweed in shake flasks, the filter-paper activity (FPA) reached 6.5 FPU/mL, a value comparable to that induced by avicel. The enzyme-hydrolysis rate induced by steam-exploded corn stalk was 54.2%, representing a 28% improvement over that induced by avicel. The duckweed starch was hydrolyzed to glucose, which was subsequently used for biomass accumulation during the fermentation process. Furthermore, to optimize the control of the fermentation process, a combined substrate of avicel and duckweed was used to induce cellulase production by T. reesei RUT C30. The cellulase production and hydrolysis rates of the combined substrate, compared with avicel alone, were 39.6% and 36.7% higher, respectively. The results of this study suggest that duckweed is a good inducer of cellulase production in T. reesei, and it might aid in decreasing the cost of lignocellulosic materials hydrolysis.

Enhanced enzymatic hydrolysis by adding long-chain fatty alcohols using film as a structure model

Many positive effects of additives on enzymatic hydrolysis of lignocellulosic materials have been investigated, but limited information has been reported on the use of long-chain fatty alcohols (LFAs) for enzymatic hydrolysis by biospired models. In this study, effects of LFAs on enzymatic hydrolysis were evaluated using biomimetic film asa structure model. LFAs clearly improved the digestibility of cellulose film from 65.1% to 77.9%, which was higher than that the digestibility of lignin-cellulose film from 53.9% to 66.2%. Further study indicated that the promotion ascribed to the effect of LFAs, which might provide more active points of chemical reaction and keep the stability of cellulase. Moreover, the digestibility of lignin-cellulose film increased by 12.3%, which might because the denaturation and nonproductive adsorption of cellulase were well prevented by supplementation of LFAs. An efficient strategy was developed to improve the enzymatic hydrolysis efficiency in the study of lignocellulosic bioconversion.

Cellulose: To depolymerize… or not to?

Oxidation of the primary OH groups in cellulose is a pivotal reaction both at lab and industrial scale, leading to the value-added products, i.e. oxidized cellulose which have tremendous applications in medicine, pharmacy and hi-tech industry. Moreover, the introduction of carboxyl moieties creates prerequisites for further cellulose functionalization through covalent attachment or electrostatic interactions, being an essential achievement designed to boost the area of cellulose-based nanomaterials fabrication. Various methods for the cellulose oxidation have been developed in the course of time, aiming the selective conversion of the OH groups. These methods use: nitrogen dioxide in chloroform, alkali metal nitrites and nitrates, strong acids alone or in combination with permanganates or sodium nitrite, ozone, and sodium periodate or lead (IV) tetraacetate. In the case of the last two reagents, cellulose dialdehydes derivatives are formed, which are further oxidized by sodium chlorite or hydrogen peroxide to form dicarboxyl groups. A major improvement in the cellulose oxidation was represented by the introduction of the stable nitroxyl radicals, such as 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). However, a major impediment for the researchers working in this area is related with the severe depolymerisation occurred during the TEMPO-mediated conversion of CH₂OH into COOH groups. On the other hand, the cellulose depolymerisation represent the key step, in the general effort of searching for alternative strategies to develop new renewable, carbon-neutral energy sources. In this connection, exploiting the biomass feed stocks to produce biofuel and other low molecular organic compounds, involves a high amount of research to improve the overall reaction conditions, limit the energy consumption, and to use benign reagents. This work is therefore focused on the parallelism between these two apparently antagonist processes involving cellulose, building a necessary bridge between them, thinking how the reported drawbacks of the TEMPO-mediated oxidation of cellulose are heading towards to the biomass valorisation, presenting why the apparently undesired side reactions could be turned into beneficial processes if they are correlated with the existing achievements of particular significance in the field of cellulose conversion into small organic compounds, aiming the general goal of pursuing for alternatives to replace the petroleum-based products in human life.

Knockdown of a laccase in Populus deltoides confers altered cell wall chemistry and increased sugar release

Plant laccases are thought to function in the oxidation of monolignols which leads to higher order lignin formation. Only a hand-full of laccases in plants have been functionally evaluated, and as such little is known about the breadth of their impact on cell wall chemistry or structure. Here, we describe a previously uncharacterized laccase from Populus, encoded by locus Potri.008G064000, whose reduced expression resulted in transgenic Populus trees with changes in syringyl/guaiacyl ratios as well as altered sugar release phenotypes. These phenotypes are consistent with plant biomass exhibiting reduced recalcitrance. Interestingly, the transgene effect on recalcitrance is dependent on a mild pretreatment prior to chemical extraction of sugars. Metabolite profiling suggests the transgene modulates phenolics that are associated with the cell wall structure. We propose that this particular laccase has a range of functions related to oxidation of phenolics and conjugation of flavonoids that interact with lignin in the cell wall.

Interconnected Hierarchical Porous Carbon from Lignin-Derived Byproducts of Bioethanol Production for Ultra-High Performance Supercapacitors

The advent of bioethanol production has generated abundant lignin-derived byproducts which contain proteins and polysaccharides. These byproducts are inapplicable for direct material applications. In this study, lignin-derived byproducts were used for the first time as carbon precursors to construct an interconnected hierarchical porous nitrogen-doped carbon (HPNC) via hydrothermal treatment and activation. The obtained HPNC exhibited favorable features for supercapacitor applications, such as hierarchical bowl-like pore structures, a large specific surface area of 2218 m(2) g(-1), a high electronic conductivity of 4.8 S cm(-1), and a nitrogen doping content of 3.4%. HPNC-based supercapacitors in a 6 M KOH aqueous electrolyte exhibited high-rate performance with a high specific capacitance of 312 F g(-1) at 1 A g(-1) and 81% retention at 80 A g(-1) as well as an excellent cyclic life of 98% initial capacitance after 20 000 cycles at 10 A g(-1). Moreover, HPNC-based supercapacitors in the ionic liquid electrolyte of EMI-BF4 displayed an enhanced energy density of 44.7 Wh kg(-1) (remaining 74% of max value) at an ultrahigh power density of 73.1 kW kg(-1). The proposed strategy may facilitate lignin utilization and lead to a green bioethanol production process.