Influence of surfactant-free ionic liquid microemulsions pretreatment on the composition, structure and enzymatic hydrolysis of water hyacinth

Enhanced hydrogen production from water hyacinth by a combination of ultrasonic-assisted alkaline pretreatment, dark fermentation, and microbial electrolysis cell

In this study, hydrogen (H₂) production from water hyacinth (WH) was enhanced by the integration of the ultrasonic-assisted alkaline (UAA) pretreatment, dark fermentation (DF), and microbial electrolysis cell (MEC). The results showed that UAA pretreatment improved around 350% in H₂ production in the DF stage and nearly 400% in the whole process compared to un-pretreated. The H₂ yield in the DF stage reached the maximum value of 110.4 mL/g-VS at a WH concentration of 20 g-TS/L. However, high concentrations of co-produced soluble metabolite products (SMPs) and suspended solid in DF effluent adversely affected the efficiency of the MEC stage. Consequently, a WH concentration of 5 g-TS/L was optimal for the UAA-DF-MEC process that achieved the highest H₂ yield of 565.8 mL/g-VS. It suggests that other auxiliary processes (e.g., dilution, centrifugation, effective methanogen inhibition, etc.) need to be developed to further improve the H₂ production from WH via the UAA-DF-MEC process.

Conversion of rice husk into fermentable sugar and silica using acid-catalyzed ionic liquid pretreatment

Rice husk is a bulky byproduct with a high silica content from rice milling. In this study, the application of an acid-catalyzed ionic liquid (IL) pretreatment was studied for processing rice husks with a rugged structure. The pretreatment conditions were 130°C for 30 min with 1.2 wt% HCl. The results of enzymatic hydrolysis demonstrated that cellulose conversion of HCl-BMIMCl-treated at 48 h was increased by 660.05%, 538.81%, and 376.55% compared with the untreated, HCl-treated, and BMIMCl-treated rice husks, respectively. Composition analysis demonstrated that most of the hemicellulose was removed in the acid-IL combined treatment. Moreover, scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared analyses indicated that the crystalline structure and outer silica layer of the rice husks were efficiently broken up. The results revealed that the HCl-catalyzed dissolution is highly favorable for the industrial application of rick husks in the production of fermentable sugar and high-purity silica.

Biamphiphilic ionic liquid based aqueous microemulsions as an efficient catalytic medium for cytochrome c

Considering the remarkable applicability of ionic liquids (ILs) in bio-catalysis involving enzymes, herein, we report new IL based aqueous microemulsions as a catalytic reactor for cytochrome c (Cyt-c). Microemulsions (μEs), comprising water as the polar component, imidazolium (cation) and dioctylsulfosuccinate (AOT) (anion) based biamphiphilic ionic liquid (BAIL) as the surfactant and a hydrophobic ionic liquid (HIL) as the non-polar component have been prepared and characterized. The use of BAIL has promoted the formation of μEs without any co-surfactant, owing to its higher surface activity. The effect of ester- or amide-functionalization of the alkyl chain of the imidazolium cation of BAILs on the phase behavior of μEs has been investigated. The prepared μEs have been characterized via conductivity, dynamic light scattering (DLS), UV-vis absorption and steady-state fluorescence (using external polarity probes) techniques. The prepared μEs have been employed as nano-reactors for exploring the catalytic activity of Cyt-c. The formed BAIL-water nano-interfaces in reverse μEs have exerted a positive effect on the catalytic activity of Cyt-c stored in a water pool of reverse μEs. A five-fold higher rate constant in μEs as compared to buffer establishes μEs as a better catalytic medium. Furthermore, the differing nature of nano-interfaces created by BAILs and water in reverse μEs, depending on the functionalization of the alkyl chain of the cationic part of BAIL, has exerted varying influence on the catalytic activity of Cyt-c. It is expected that the present work will result in providing a versatile platform for the creation of new IL and water based μEs for bio-catalytic applications.

Biosurfactants: The green generation of speciality chemicals and potential production using Solid-State fermentation (SSF) technology

Surfactants are multipurpose products found in most sectors of contemporary industry. Their large-scale manufacturing has been mainly carried out using traditional chemical processes. Some of the chemical species involved in their production are considered hazardous and some industrial processes employing them categorised as "having potential negative impact on the environment". Biological surfactants have therefore been generally accepted worldwide as suitable sustainable greener alternatives. Biosurfactants exhibit the same functionalities of synthetic analogues while having the ability to synergize with other molecules improving performances; this strengthens the possibility of reaching different markets via innovative formulations. Recently, their use was suggested to help combat Covid-19. In this review, an analysis of recent bibliography is presented with descriptions, statistics, classifications, applications, advantages, and challenges; evincing the reasons why biosurfactants can be considered as the chemical specialities of the future. Finally, the uses of the solid-state fermentation as a production technology for biosurfactants is presented.

Microemulsion Microstructure(s): A Tutorial Review

Microemulsions are thermodynamically stable, transparent, isotropic single-phase mixtures of two immiscible liquids stabilized by surfactants (and possibly other compounds). The assortment of very different microstructures behind such a univocal macroscopic definition is presented together with the experimental approaches to their determination. This tutorial review includes a necessary overview of the microemulsion phase behavior including the effect of temperature and salinity and of the features of living polymerlike micelles and living networks. Once these key learning points have been acquired, the different theoretical models proposed to rationalize the microemulsion microstructures are reviewed. The focus is on the use of these models as a rationale for the formulation of microemulsions with suitable features. Finally, current achievements and challenges of the use of microemulsions are reviewed.

Marsilea spp.-A novel source of lignocellulosic biomass: Effect of solubilized lignin on anaerobic biodegradability and cost of energy products

The present study concerns the liquefying potential of an unusual source of lignocellulosic biomass (Marsilea spp., water clover, an aquatic fern) during combinative pretreatment. The focus was on how the pretreatment affects the biodegradability, methane production, and profitability of thermochemical dispersion disintegration (TCDD) based on liquefaction and soluble lignin. The TCDD process was effective at 12,000 rpm and 11 min under the optimized thermochemical conditions (80 °C and pH 11). The results from biodegradability tests imply that 30% liquefaction was sufficient to achieve enhanced biodegradability of about 0.280 g-COD/g-COD. When biodegradability was >30% inhibition was observed (0.267 and 0.264 g-COD/g-COD at 35-40% liquefaction) due to higher soluble lignin release (4.53-4.95 g/L). Scalable studies revealed that achievement of 30% liquefaction was beneficial in terms of the energy and cost benefit ratios (0.956 and 1.02), when compared to other choices.

Enhanced saccharification of rice straw using combined ultra-high pressure and ionic liquid microemulsion pretreatments

Energy efficiency ratio is significant in completely estimating lignocellulosic biomass pretreatment. In this work, rice straw (RS) was pretreated by ultra-high pressure (UHP), ionic liquid microemulsion (ILM), and a combination of UHP and ILM (ILM + UHP) at mild temperature. The chemical composition, crystalline structure, surface morphology, and enzymatic hydrolysis of untreated and pretreated RS samples were compared. After ILM pretreatment ([Emim]Ac/cyclohexane/Triton X-100/n-butanol = 0.25/0.15/0.45/0.15) at 500 MPa, 50 °C for 4 h, the cellulose content of the regenerated RS increased by 62.5, 66.2% of the lignin was removed, 37.3% of crystallinity index decreased, and the reducing sugar yield of 89.6% was achieved. All results show that the ILM + UHP pretreatments were more effective than sole UHP or ILM treatment at low temperature.

Enhancing bioethanol production from water hyacinth by new combined pretreatment methods

This study investigated the possibility of enhancing bioethanol production by combined pretreatment methods for water hyacinth. Three different kinds of pretreatment methods, including microbial pretreatment, microbial combined dilute acid pretreatment, and microbial combined dilute alkaline pretreatment, were investigated for water hyacinth degradation. The results showed that microbial combined dilute acid pretreatment is the most effective method, resulting in the highest cellulose content (39.4 ± 2.8%) and reducing sugars production (430.66 mg·g^-1). Scanning Electron Microscopy and Fourier Transform Infrared Spectrometer analysis indicated that the basic tissue of water hyacinth was significantly destroyed. Compared to the other previously reported pretreatment methods for water hyacinth, which did not append additional cellulase and microbes for hydrolysis process, the microbial combined dilute acid pretreatment of our research could achieve the highest reducing sugars. Moreover, the production of bioethanol could achieve 1.40 g·L^-1 after fermentation, which could provide an extremely promising way for utilization of water hyacinth.

The effect of surfactant-assisted ultrasound-ionic liquid pretreatment on the structure and fermentable sugar production of a water hyacinth

This study investigated the possibility of enhancing the disruption of water hyacinth (WH) in an ultrasound-ionic liquid (US-IL) pretreatment assisted by sodium dodecyl sulfate (SDS). 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was used to dissolve the WH. The optimum concentration of SDS for the highest production of reducing sugar was also determined. Compared to the US-IL pretreatment, the production of reducing sugars, cellulose conversion and delignification were increased by 72.23%, 58.74% and 21.01%, respectively, upon addition of 0.5% SDS. Moreover, the enhancement of SDS in the US-IL pretreatment was confirmed by the analysis of structural features, which demonstrated that the SDS increased the removal of lignin and decreased the cellulose crystallinity.

Water hyacinth a potential source for value addition: An overview

Water hyacinth a fresh water aquatic plant is considered as a noxious weed in many parts of the world since it grows very fast and depletes nutrients and oxygen from water bodies adversely affecting the growth of both plants and animals. Hence conversion of this problematic weed to value added chemicals and fuels helps in the self-sustainability especially for developing countries. The present review discusses the various value added products and fuels which can be produced from water hyacinth, the recent research and developmental activities on the bioconversion of water hyacinth for the production of fuels and value added products as well as its possibilities and challenges in commercialization.

Cobalt-60 gamma-ray irradiation pretreatment and sludge protein for enhancing enzymatic saccharification of hybrid poplar sawdust

In order to improve the enzymatic saccharification of hybrid poplar sawdust, gamma irradiation pretreatment and enzymatic hydrolysis in the presence of sludge protein were investigated. The cellulose crystallinity index were significantly decreased after irradiation pretreatment, and adding sludge protein improved enzyme activity and increased the reducing sugar yield. The conditions of irradiation pretreatment and enzymatic hydrolysis in the presence of sludge protein were systematically examined. The maximum reducing sugar yield was 519mg/g under an irradiation dose of 300kGy, a sludge protein dosage of 2mg/mL, an enzymatic hydrolysis temperature of 45°C, an enzymatic hydrolysis time of 84h, and a 90FPU/g enzyme loading. This work indicated that the combined method of gamma irradiation pretreatment and enzymatic hydrolysis in the presence of sludge protein was a promising potential for the saccharification of hybrid poplar sawdust.