Switching cultivation for enhancing biomass and lipid production with extracellular polymeric substance as co-products in Heynigia riparia SX01

Pb0 flue gas biosorption in denitrifying MBfR: Characteristics and binding ability of extracellular polymeric substances

Pb⁰ in flue gas which is ubiquitous in the environment, poses a certain threat to human and ecology, but the study on EPS-dependent stabilization of lead to remove Pb⁰ from flue gas remains insufficient. In this investigation, the characteristics and heavy metals-binding ability of four EPS fractions were evaluated. The EPS were extracted from denitrifying membrane biofilm reactor (MBfR) and divided into slime EPS (S-EPS), loosely-bound EPS (LB-EPS), tightly-bound EPS (TB-EPS) and EPS in circulating flow (Y-EPS). The S, LB, TB-EPS related to Pb stabilization on biofilm need more attention. Compared to Pb-S-EPS (0.013 mg g^-1) and Pb-LB-EPS (0.13 mg g^-1), the Pb-TB-EPS (0.26 mg g^-1) was mainly stable form of vapor Pb⁰, since TB-EPS's higher content (30.67-82.44 mg g^-1 VSS), proteins (13.47-36.32 mg g^-1 VSS) and polysaccharides (9.37-32.48 mg g^-1 VSS) concentration. Particularly, proteins related ligands were more effective in S, LB, TB-EPS dependent adsorption of Pb, complexing with hydrophobic acid ligands further strengthened in TB-EPS adsorption. The Pb-EPS complex formed via binding with functional groups (such as O-H, N-H, C-H and CC) on EPS, also facilitated by loose structure of proteins. This study enlightens the researchers on the bio-treatment and EPS-dependent biosorption of Pb⁰ in flue gas in denitrifying MBfR.

Controlling the Formation of Foams in Broth to Promote the Co-Production of Microbial Oil and Exopolysaccharide in Fed-Batch Fermentation

A large amount of foam is generated in the production of microbial oil and exopolysaccharide (EPS) by Sporidiobolus pararoseus JD-2, which causes low efficiency in fermentation. In this study, we aimed to reduce the negative effects of foams on the co-production of oil and EPS by controlling the formation of foams in broth. As we have found, the formation of foams is positively associated with cell growth state, air entrapment, and properties of broth. The efficient foam-control method of adding 0.03% (v/v) of the emulsified polyoxyethylene polyoxypropylene pentaerythritol ether (PPE) and feeding corn steep liquor (CSL) at 8–24 h with speed of 0.02 L/h considerably improved the fermentation performance of S. pararoseus JD-2, and significantly increased the oil and EPS concentrations by 8.7% and 12.9%, respectively. The biomass, oil, and EPS concentrations were further increased using a foam backflow device combined with adding 0.03% (v/v) of the emulsified PPE and feeding CSL at 8–24 h, which reached to 62.3 ± 1.8 g/L, 31.2 ± 0.8 g/L, and 10.9 ± 0.4 g/L, respectively. The effective strategy for controlling the formation of foams in fermentation broth reported here could be used as a technical reference for producing frothing products in fed-batch fermentation.

Extracellular Polymeric Substances (EPS) as Microalgal Bioproducts: A Review of Factors Affecting EPS Synthesis and Application in Flocculation Processes

Microalgae are natural resources of intracellular compounds with a wide spectrum of applications in, e.g., the food industry, pharmacy, and biofuel production. The extracellular polymeric substances (EPS) released by microalgal cells are a valuable bioproduct. Polysaccharides, protein, lipids, and DNA are the main constituents of EPS. This review presents the recent advances in the field of the determinants of the synthesis of extracellular polymeric substances by microalgal cells and the EPS structure. Physical and chemical culture conditions have been analyzed to achieve useful insights into the development of a strategy optimizing EPS production by microalgal cells. The application of microalgal EPS for flocculation and mechanisms involved in this process are also discussed in terms of biomass harvesting. Additionally, the ability of EPS to remove toxic heavy metals has been analyzed. With their flocculation and sorption properties, microalgal EPS are a promising bioproduct that can potentially be used in harvesting algal biomass and wastewater management.

Maximizing EPS production from Pseudomonas aeruginosa and its application in Cr and Ni sequestration

Heavy metal contamination of water bodies has been a cause of grave concern around the globe. Analysis of various industrial effluents has revealed a perilous level of Cr (VI) and Ni (II). Pseudomonas aeruginosa is an extracellular polymeric substances (EPSs) producing bacterium. EPS has a great potential in the sequestration of heavy metal ions. In the present study efforts have been made to understand the effect of time, pH, and temperature on production of EPS by P. aeruginosa (MTCC 1688). The extracted EPS has been applied for removal of Ni (II) and Cr (VI) ions from aqueous system. The results revealed that highest EPS yield (26 mg/50 mL) can be obtained after 96 h of incubation at pH 6 and 32 °C temperature in 50 mL of culture. Treatment of 10 mg/L Cr (VI) and Ni (II) with 30 mg/L EPS resulted in the removal of 26% and 9% of Cr (VI) and Ni (II), respectively. Fourier-transform infrared spectral analysis revealed the involvement of –OH, –NH, C–O, diketone, and ester functional groups of EPS in the attachment of Cr (VI) ion while involvement of amide and –C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O groups in Ni (II) binding with EPS. Scaling-up the production of EPS using bioreactor may further help in developing an efficient process for treatment of water polluted with Cr and Ni.

•

Culture conditions for the highest EPS production by Pseudomonas aeruginosa have been optimized.

•

The highest EPS yield (26 mg/50 mL) can be obtained after 96 h of incubation at pH 6 and 32 °C temperature.

•

Treatment of contaminated water with EPS resulted in removal of 26% and 9% of Cr (VI) and Ni (II), respectively.

•

FTIR studies revealed the involvement of –OH, –NH, C–O, diketone, and ester groups of EPS in the attachment of Cr (VI) ion.

•

FTIR studies revealed the involvement of amide and –CO groups in Ni (II) binding with EPS.

Increasing DNA content for cost-effective oil production in Parachlorella kessleri

The aim of this work was to study salt stress effects on DNA content and oil production processes integrating harvesting, lipid accumulation and oil extraction. Salt-induced enlargement of Parachlorella kessleri cells, with increasing content of DNA and neutral lipid were found. The 34.77% neutral lipid content and biomass concentration of 0.83 g L^-1 were obtained after 7 days of salt treatment, compared with that of 13.57% and 0.89 g L^-1 cultivated under normal condition. Sedimentation efficiency increased markedly from 15% to 90% due to the cell enlargement. Disruption fraction and the recovery rate of total lipids of wet cells under salt stress were significantly higher than that of normal conditions (100% and 82.4% for salt stress vs.76.8% and 51.1% for normal conditions). This work demonstrated that salt-induced increase in cell size and DNA content was an effective strategy for the enhancement of oil production, microalgae harvesting and oil extraction.

Pilot-scale isolation and characterization of extracellular polymeric substances (EPS) from cell-free medium of Spirulina sp. LEB-18 cultures under outdoor conditions

This objective of this work was to monitor the EPS production during the growth of Spirulina sp. LEB-18, evaluate the productivity and to characterize the exopolymers obtained on pilot-scale under outdoor conditions. The production of crude EPS occurred in all phases of biomass growth and was approximately ten folds higher than that biomass concentration of Spirulina sp. LEB-18 at the end cultivation, demonstrating the importance of the use of supernatant after harvesting of Spirulina to obtain high value bioproducts. The EPS extracted by Spirulina sp. LEB-18 are typically heteropolymers with one high molecular weight fraction (polysaccharides) with potential to be utilized as an alternative bioflocculant and another fraction of lower molecular mass (proteins). The presence of uronic acids, pyruvates and acyl groups of carbohydrates or carboxylic groups of amino acids in protein moiety is the main responsible for overall negative charge of EPS, which is also of biotechnological importance. Moreover, due to the pseudoplastic behavior of the solutions and high thermal stability, the obtained EPS can be widely applied in several industrial sectors, thus determining its technological and market potentiality.

Variation of fatty acid desaturation in response to different nitrate levels in Auxenochlorella pyrenoidosa

Microalgae are promising feedstocks for biodiesel, where the high proportion of monounsaturated fatty acid such as oleic acid (C18:1) is preferred. To regulate fatty acid desaturation in microalgae, the relationship among nitrate concentration, fatty acid composition and the expression levels of desaturase genes was explored. Dynamic variations of fatty acid profiles suggested nitrate could induce desaturation of C18 fatty acids. The content of C18:1 in Auxenochlorella pyrenoidosa was 30.88% at 0 g l^-1 nitrate concentration compared with 0.48% at 1.5 g l^-1. The expressions of relative delta-9, 12 and 15 fatty acid desaturase genes (Δ9, Δ12 and Δ15FADs) were further investigated. The 330% upregulated expression of Δ9FAD in logarithmic phase at 0 g l^-1 resulted in C18:1 accumulation. Moreover, nitrate replenishment caused a sharp reduction of C18:1 from 34.79% to 0.22% and downregulation of Δ9FAD expression to 1% of the nitrate absence level, indicating the pivotal role of Δ9FAD in C18:1 accumulation. Finally, overexpression of Δ9FAD in Escherichia coli and Saccharomyces cerevisiae resulted in an increase of C18:1, confirming its ability of desaturating C18:0. The results could provide a new approach and scientific guidance for the improvement of biodiesel quality and industrialization of high-valued chemicals by means of metabolic engineering.

Characterization and toxicity of nanoscale fragments in wastewater treatment plant effluent

Much attention has been paid to extracting and isolating specific and well-known nanoparticles (especially for engineered nanomaterials) from complex environmental matrices. However, such research may not provide global information on actual contamination because nanoscale fragments exist as mixtures of various elements and matrices in the real environment. The present work first isolated and characterized nanoscale fragments in effluents from municipal wastewater treatment plants (WWTPs). The nanoscale fragments were found to be composed of 70-85% carbon and low amounts of oxygen, heavy metals and other elements and exhibited nanosheet topographies (approximately 0.87-1.31 nm thickness and 68-187 nm lateral length). Because the isolated nanoscale fragments were mixtures rather than one specific type of nanoparticle, they were present at high concentrations ranging from 0.07 to 0.55 mg/L. It was also found that the accumulation of nanoscale fragments in rice reached 0.59 mg/g under exposure to environmentally relevant concentrations, leading to marked phytotoxicity (e.g., ultrastructural damage to chloroplasts and mitochondria). Metabolic analysis revealed the toxicological mechanisms to be related to disorders of carbohydrate, amino acid and fatty acid metabolism. This study is the first to characterize the properties and analyze the toxicity of nanoscale fragments in the effluents of WWTPs. Given that WWTP effluents containing nanoscale fragments are continuously discharged to the soil, surface water and seas, nanoscale fragment materials deserve considerable attention in future work compared with the few widely studied engineered nanoparticles.